Site to another tunnel not succeeded traffic Windows
Have a problem with a static to the dynamic VPN from Site to Site between 2 ASA5505. Tunnel is in place and can test both ways isn't a problem, can also travel and web remote RDP. However, I can't browse the network or obtain any authentication DC pass.
My VPN clients are all no this problem. I post the config of the remote site.
The config may have got a bit messed up in attempts, please let me know if you see something, I'm leaning toward the ACL.
Sho run
: Saved
:
ASA 5,0000 Version 22
!
ASA-2 host name
domain internal.monaco.com
enable the encrypted password xxxxx
encrypted passwd xxxx
names of
!
interface Ethernet0/0
Description external connection
switchport access vlan 2
!
interface Ethernet0/1
Description internal LAN
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.16.2.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
Group object BasicPortsUDP
object-group network
object-network 172.16.0.0 255.255.0.0
object-group, internal network
Local Group object
Inside_in access-list - BEGIN Note: Out bound ACL (update: August 20, 2013).
access-list Inside_in note--> Allow shared Internet use
Inside_in list extended access permit tcp any any OutgoingTCP object-group
Inside_in list of permitted udp access all all OutgoingUDP object-group
Inside_in list extended access permit icmp any one
Note Inside_in access - list--> explicit DENY ALL
Inside_in deny ip extended access list a whole
Inside_in access-list - END - note
Note Inside_in access - list--> allow the VPN to hand traffic
Inside_in list extended access permitted ip object-group main object-group internal
Inside_in list extended access permitted group ip object-group main internal object
moved here
Outside_in access-list - BEGIN Note: ACL related (update: 15/12/2006).
Outside_in list extended access permitted group ip object-group main internal object
Note Outside_in access - list-> allow ICMP traffic
Outside_in list extended access permit icmp any any echo response
Outside_in list extended access allow all unreachable icmp
Outside_in list extended access permit icmp any any traceroute
Note Outside_in access - list-> explicit DENY ALL
Outside_in deny ip extended access list a whole
Outside_in access-list - END - note
no_nat allowed extended access list main object-group Local ip object-group
VPN_to_Main list extended access allowed object-group object-group main Local ip
NAT allowed ip extended access list a whole
pager lines 24
Hi Brad,
Since the issue is considered by speciifc traffic/application, could you please raise the plotter output on the two ASAs package (in the outbound direction) to check if the flow is correct for non-working traffic.
Collect the following:
detailed entry of Packet-trace
Thank you
Shakur
Tags: Cisco Security
Similar Questions
-
Hello
I'll put up a tunnel vpn site-to-site between two locations. Both have cisco ASA 5505 running a different version, I'll explain in more detail below. so far, I was able to get the tunnel to come but I can't seem to pass traffic, I work at this for days now and have not been able to understand why he will not pass traffic. Needless to say that the customer's PO would be on the fact that their VPN is not upward and they had to do by hand. I'll put the configs below, if possible can someone help me as soon as POSSIBLE, I really want to get this site up and running so that we do not lose the customer.
An IP address of 0.0.0.0 = site
Site B IP = 1.1.1.1A Version of the site = 8.3.1
Version of the site B = 9.2.3__________________________
_________A RACE OF THE SITE CONFIGURATION
Output of the command: "sh run".
: Saved
:
ASA Version 8.3 (1)
!
hostname SDMCLNASA01
SDMCLNASA01 domain name. LOCAL
Select 5E8js/Fs7qxjxWdp of encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
the IP 0.0.0.0 255.255.255.252
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
SDMCLNASA01 domain name. LOCAL
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the NETWORK_OBJ_192.168.0.0_24 object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
network lan_internal object
192.168.0.0 subnet 255.255.255.0
purpose of the smtp network
Home 192.168.0.245
Network http object
Home 192.168.0.245
rdp network object
Home 192.168.0.245
network ssl object
Home 192.168.0.245
network camera_1 object
host 192.168.0.13
network camerahttp object
host 192.168.0.13
service object 8081
source eq 8081 destination eq 8081 tcp service
Dvr description
network camera-http object
host 192.168.0.13
network dvr-http object
host 192.168.0.13
network dvr-mediaport object
host 192.168.0.13
object-group Protocol DM_INLINE_PROTOCOL_1
object-protocol udp
object-tcp protocol
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
DM_INLINE_TCP_2 tcp service object-group
port-object eq 34567
port-object eq 34599
EQ port 8081 object
permit access ip 192.168.0.0 scope list outside_1_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0
outside_access_in list extended access permit tcp any any eq smtp
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_192.168.1.0_24 destination NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.1.0_24
NAT (exterior, Interior) static static source NETWORK_OBJ_192.168.0.0_24 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.0.0_24
!
network lan_internal object
NAT dynamic interface (indoor, outdoor)
purpose of the smtp network
NAT (all, outside) interface static tcp smtp smtp service
Network http object
NAT (all, outside) interface static tcp www www service
rdp network object
NAT (all, outside) interface static service tcp 3389 3389
network ssl object
NAT (all, outside) interface static tcp https https service
network dvr-http object
NAT (all, outside) interface static 8081 8081 tcp service
network dvr-mediaport object
NAT (all, outside) interface static 34567 34567 tcp service
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 71.42.194.209 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
http server enable 8080
http 192.168.0.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 outside
http 71.40.221.136 255.255.255.252 inside
http 71.40.221.136 255.255.255.252 outside
http 192.168.0.0 255.255.255.0 outside
http 97.79.197.42 255.255.255.255 inside
http 97.79.197.42 255.255.255.255 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set peer 1.1.1.1
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 192.168.0.50 - 192.168.0.150 inside
dhcpd dns 192.168.0.245 209.18.47.62 interface inside
dhcpd SDMCLNASA01 field. LOCAL inside interface
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
pre-shared key *.
!
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
!
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:462428c25e9748896e98863f2d8aeee7
: end________________________________
SITE B RUNNING CONFIG
Output of the command: "sh run".
: Saved
:
: Serial number: JMX1635Z1BV
: Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor
:
ASA Version 9.2 (3)
!
ciscoasa hostname
activate qddbwnZVxqYXToV9 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 1.1.1.1 255.255.255.252
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network camera_http object
host 192.168.1.13
network camera_media object
host 192.168.1.13
network of the NETWORK_OBJ_192.168.0.0_24 object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
outside_access_in list extended access permit tcp any any eq 9000
outside_access_in list extended access permit tcp any any eq www
outside_access_in list extended access permit icmp any one
outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object NETWORK_OBJ_192.168.0.0_24
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 732.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static static source NETWORK_OBJ_192.168.0.0_24 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.0.0_24
NAT (exterior, Interior) static static source NETWORK_OBJ_192.168.1.0_24 destination NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.1.0_24
!
network camera_http object
NAT (all, outside) interface static tcp www www service
network camera_media object
NAT (all, outside) interface static 9000 9000 tcp service
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 71.40.221.137 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 peer set 0.0.0.0
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev1 allow outside
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0dhcpd address 192.168.1.50 - 192.168.1.150 inside
dhcpd dns 192.168.0.245 209.18.47.61 interface inside
dhcpd SDPHARR field. LOCAL inside interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol
internal GroupPolicy_0.0.0.0 group strategy
attributes of Group Policy GroupPolicy_0.0.0.0
VPN-tunnel-Protocol ikev1, ikev2
tunnel-group 0.0.0.0 type ipsec-l2l
tunnel-group 0.0.0.0 ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
!
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:19031ab1e3bae21d7cc8319fb7ecf0eb
: endSorry my mistake.
Delete this if it's still there
card crypto external_map 1 the value reverse-road
Add this to both sides
card crypto outside_map 1 the value reverse-road
Sorry about that.
Mike
-
Tunnel VPN IPSEC (LAN to LAN) not succeeded traffic
I had a temporary scenario I need to establish an IPSEC VPN between branch (cisco router) and HQ (VPN concentrator).
The tunnel is established end but traffic stop happening after some 5-10 minutes. I have to manually clear the session encryption and then connectivity is fine. To test the above, I'll send branch ICMP packets to HQ. I can see ' cryto isakmp his ' and ' crytpo ipsec his ' active and fine.
Share your opinion on this guy!
Hello
Make sure that this life corresponds to the router and the hub.
This is a doc for IPSEC troubleshooting: -.
http://www.Cisco.com/en/us/customer/products/ps6120/products_tech_note09186a00807e0aca.shtml
Parminder Sian
-
traffic Windows 7 not out on the interface of traffic as it is assumed
Hi experts
I got this company of Win7. I want to install two network interfaces on it. A network interface will be for the management of the machine itself. and another interface for application traffic. I had an application that I run and which consumes a lot of bandwidth to the point that if I put everything on an interface I could lose the RDP connection.
Also, I have set up my IP of mgmt interface. and it works. I can RDP into it. But when I configure the 2nd interface with its IP address, the auto road which becomes forces added traffic to pass by my mgmt interface/IP, which is not what I want.
These two survey periods are two different subnets and they go to different switches. I did a simple sketch of my installation below to show what I'm trying to accomplish.
Under linux, I would just like to add a static route and who takes care of this, but how do I do that on Windows?
I follow this guide but still have the same problem:
http://Windows.Microsoft.com/en-CA/Windows/configuring-multiple-network-gateways#1TC=Windows-7
Hello
I understand the inconvenience caused.
For assistance, I suggest you to post the question on the link below. The link below is the link of support for TechNet Support forums. They are experts in your field of investigation and would be in a better position to answer your concerns.
Hope this Information is useful.
-
In a new tab (+) window, I get a full screen of the Bing site, and I do not see the gear of NEW CONTROLS TAB.
I tried dragging one bookmark in this window and then had this site full-screen. But when I exit Firefox and restart it, it is by default to the Site of Bing - I HATE BING
I do not see the gear for new tab controls, and so I can't put it: 'display your top sites '.
I uninstalled Firefox and installed the latest version - I found myself with the same thing, I had - including my homepage and exactly the same problem - your help would be appreciatedWhat do you see on the page, just nothing?
Could you come back: config, filter using newtab again once and if browser.newtab.url is bold claims to be 'set of users", right click and click Reset in the menu bit
If you open a new tab, which solve this problem?
Edit: sorry for typo's fault: browser.newtab.url
-
http Web sites does not work with windows 10
Basically, a lot of websites used to work on my firefox with windows 10, such as google, youtube, twitter and facebook, the error I get is:
This connection is Untrusted
You asked Firefox to connect safely on www.youtube.com, but we cannot confirm that your connection is secure.
Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
What should I do?If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.
This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.
curtcurt said
his parental control of Microsoft
If you do not need these parental control, you can disable this feature.
If you do not need parental control, you probably have to import a certificate so that Firefox will trust Microsoft's parental control. (I would need to look for the details in a current thread).
-
Question
better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
DetailsIn current versions of Flash you can also do this via the control panel.
- Control Panel > Flash Player, click on remove and erase data
-
This connection is Untrusted
You asked Firefox to connect
securely to the cards.chase.com, but we cannot confirm that your connection is secure.
Normally, when you try to connect safely,
sites will present a reliable identification to prove that you
go to the right place. However, the identity of this site cannot be verifiedWhat should I do?
If you connect normally to
This site without problems, this error could mean that a person is
trying to impersonate the site and you should not continue.
Technical details
Cards.Chase.com uses an invalid security certificate.The certificate will be more valid until 04/05/2010 17:00.
(Error code: sec_error_expired_certificate)
I understand the risks
The date is on this PC set correctly in Windows?
-
Another computer is not accessible in Windows XP over the network.
. DETA transfer isn't danShows network and sharing Center is connected, but the computer is not available in windows xp.
Hey akhil,.
Looking for a conflict between two computers browser. I'm not
talk about Internet Explorer here. The browser is the program that allows any computer see any another computer on the local network. On a local network with two computers, you must run a browser on a single.
Make sure that the browser service runs on one of the computers.
Control Panel - Administrative Tools - Services. Ensure that the computer, browserand support TCP/IP NetBIOS, services the two show with status = Started.
Stop and disable the service browser on the other computer.
After checking / deactivation / activation as described above, two off computers, then turn them both back.The program Microsoft Browstat will show us what are the browsers (I'm not
talking about Internet Explorer) you have in your domain / workgroup, to any
time. -
Not all traffic tunneling remote desktop
This is the remote router config 871 attached. Comes in the SAA under DefaultL2Lgroup. Another remote desktop is the same tunnelgroup. Traffic to 192.168.0.0/24 works, but I also need the tunnel to all traffic 10.8.0.0/24. Let me know what you think. Thank you
Right, the problem might be on the router.
Try turning off the "no ip cef" CEF and check again.
Please rate if this helped.
Kind regards
Daniel
-
Please answer as soon as possible... That's what it shows... code (10)... I tried to update the driver... It shows that it is the best driver available and installed in my camera...
OT: teredo tunneling pseudo interface driver Windows 8 pro does not not work... Please help (code 10)... I tried to update shows it is updated and the best driver is installed on my laptop
Hi Shilratna,
The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
I suggest you try the steps from the following link:
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-usI hope this helps. Let us know if you have other problems with Windows in the future.
-
Some time ago I bought Adobe Acrobat 4.0 and aired on a Windows XP laptop. I recently bought another laptop running Windows 7 Professional, but it seems that my version of Adobe Acrobat 4.0 is not compatible with Windows 7. What should I do? Should I purchase an upgrade?
Hi johnindallas,
Yes, you reason as acrobat 4 is not compatible with Windows 7.
Acrobat 4 is a very old version and Adobe no longer provide support for this version.
I suggest you buy the Acrobat DC subscription or license.
For more details on the plans & pricing, please see:
Plans and prices. Adobe Acrobat DC
Concerning
Meenakshi Negi
-
I have difficulties to show my creative cloud from my PC. When I login from another computer to office, it is fine. Cloud is not compatible with windows 8? Any ideas on what could be the problem?
Hello
Creative cloud is compatible with windows 8.
Please follow the steps below:
1. Uninstall CC program and features
2. run cleaning CC tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems
3. install Creative Cloud again, download and install Adobe Creative Cloud applications
Hope this helps
Thank you
Varun
-
How your SEO does not work if you move your Web site to another host?
How your SEO does not work if you move your Web site to another host?
Thank you
Michael
Hi Michael
Move single accommodation, should not influence seo. Change the site host requires a change in the location of the file, so no impact. However, I found a video that will understand this
Let me know if you have any question.
-
Hi, I have another problem, when people visit my site that they could not return to the home page
Hello
Problem is in outline view.
Please follow the steps below and you should be all set.
1. go in the Plan view.
2. right click on the 'HOME' page
3. Select "Menu" > "include the Page containing the hyperlink.
4 save the file and then try to preview.
You should be all set.
Concerning
Vivek
Maybe you are looking for
-
Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.
-
WHT is firefox tries to force me to download flash player
I go on my site of baseball minor League for the games. I click the button to get a view animated on the real-time action game. Firefox tells me I have to have a flash drive and need to download it. I closed firefox, go to google, go to the same site
-
What ePub reader to use all of the iBooks issue?
I have the same problem as many other readers, iBooks will not sync between devices and does not download iClouds books. I have 40 GB of books that I can only read on my iPad 2 Air, not on my 2 iPhones. And it does not seem that it is one thing, appl
-
I think I know the answer to this already (i.e. no) but wanted to check... Is it possible to create a custom, such control when it is resized any graphics remain the same size? that is something along the lines of the following image Why? I have a fe
-
I have a problem my printer I am running Windows 7 family and my printer is a Canon Pixma MP280 of loading I have the disc and it tells me that it does not recognize the printer