Upgrade HDD/SSD 500 GB on Tecra R950-19th

Similar Questions

• Upgrade HDD SSD

  Hello

  I have Acer Aspire M5 - 583P - 9688 Lpatop and I want to upgrade my HDD SSD t. Could you please tell me what type of SSD I will buy and is there a link for the installation of the new HARD drive.

  Also how I will keep the copy of my windows once I upgraded my hard drive.

  Thank you

  Hello

  1. You can install these SSDS:
     Crucial
     A - Data
     Samsung
  2. Installation:

• Upgrade HDD/SSD on Qosmio G30-126

  I'm trying to decide if I should upgrade existing at a larger size HARD drive or just a large and an SSD.

  Question 1: what is the size for the two new HARD drives because the power supply is limited?
  Question2: For now, I run the two HARD a disc, so no RAID. Is it possible that I can determine what is on which drive? I do not envy the dumping everything on a drive connected and then import the new HARD disk.
  Question3: Is there a substantial improvement in speed when using the SSD as a HARD drive? I run W7 professional and compared to Mint example startup is pathetically slow.

  Appreciate answers or suggestions.

  Hello

  Qosmio G30 already supports SATA interface and so general, interface SATA has no capacity limit. If you can install a SATA 2.5 HARD drive with all the sizes. Ore of 500 GB drives is no problem on SATA interface so it s on applications and data based on what size you want / need.

  If your laptop is capable of managing 2 hard/SSD drives, you can buy an SSD 128GB for example for Windows and your applications and a HDD (500 GB) for your data.

  Disc SSD is faster than hard drives, but they are more expensive. SSD are perfect for the OS itself and programs but for data such as photos, music, etc. Hard drives are fast enough.

• Tecra R950 Intel SSD 520 and SSD set password = F4 BSOD after reactivation

  Hello
  follwing problem:
  Tecra R950 with Intel SSD and HDD/SSD series 520 passes together = always F4 BSOD after activation of the standby mode.
  OK with no password set.
  OK with Hibernate.
  Same problem with iastor and msahci driver.

  Any ideas? Think it's a problem with the bios. He goes down the ssd when wakeup, same cannot write a dump of memory (error 0xc0000010), the necessary cold start-up.
  Steve

  Hello

  Replace the SSD drive?
  As far as I know a lot of the Tecra R950 was equipped with a 500 GB HARD drive.

  I could be linked to the SSD drive

• Tecra R950-104 - can I replace ODD with SSD?

  Hello

  Is it possible to replace my DVD drive with an SSD with a HARD Drive Caddy?

  My laptop is a Toshiba Tecra R950-104.

  Kind regards

  Luis

  Hello

  I found on the internet some UltraSlim SATA HDD/SSD mounting frame that allow the use of 2nd 2.5 HDD/SSD drive instead of ODD in Notepad Tecra R950 but to be honest I m not 100% sure if the BIOS recognize such additional device.

  I know that computers Toshiba laptop (Portege and Tecra) series different takes in charge these updates in the past but this replacement was not supported by each laptop model.

  It depends on the BIOS and in the event that the BIOS recognize the 2nd HDD/SSD drive, the system should be able to recognize 2nd HARD drive

• Re: Tecra R950-18F: win 8 Pro starts a new SSD drive

  Hello

  Having a few issues with the victory 8 DVD pro included with my laptop.

  BIOS is set as UEFI + secure boot, win 8 pro dvd starts and I can start recovery, after a while, he asks disc 2 and starts to recover win 8.

  After completion and reboot, it does not start and shows just the toshiba logo.

  Factory hdd with SSD OCZ VERTEX 4 is replaced by the bios.

  What could be the problem?

  > Drive HARD factory is replaced with SSD OCZ VERTEX 4 recognized by the Bios.

  You have the same start-up problems 8 win using the original HDD equipped Tecra R950?

  From my point of view, it would be possible that this laptop does not start successfully because of the new SSD.

  I recommend you check the previous HARD disk.
  If the laptop could start correctly, the problem is related to the new SSD drive.

  In some cases, it would be possible that the SSD firmware must be updated.

• Tecra S10 - problem upgrading to SSD Kingston

  Hello!
  Tecra S10 - I am trying to upgrade HDD to Kingston SSD 128MD.

  During the new installation of Windows 7-64 installer complains that there is no boot device valid to create the system partition, even if the disk is recognized. BIOS is later, I tried configuring IDE and AHCI.

  Is there a problem of General compatibility with SSDS and the notebooks?
  I noticed a similar problem with satellite A200.
  Thank you

  Hello

  How do you update firmware?
  Have you checked if a firmware update is available and necessary?

  Found a page of Kingston providing SSD firmware updates:
  http://www.Kingston.com/en/support/technical/downloads?product=sv100s2&filename=KDID110225a

• Upgrade HDD in Tecra 8200 problem

  I am trying to upgrade the hard drive in my Tecra 8200 10 GB to 30 GB. I have adapters to connect both drives old and new laptop on my desk, then used cloning software to copy content from the old disk to the new, leaving the data on the old. The old and the new disks are formatted in FAT32. When I put the new drive in the laptop, it is not recognized. The configuration of the BIOS screen says 'no drive '.

  I tried 2 different programs of cloning and tried the new disk using a USB external box connected to the laptop, with the original drive mounted in the laptop cloning. Still not good. I went through the whole thing with a 20 GB drive that I use in the external case, and it is not to be recognized. The 30 GB and 20 GB are recognized and can be read by, by 2 different computer, so I am prety sure that disks are OK. The 8200 BIOS does not recognize them and it doesn't seem to be a way to force the BIOS to detect the drives.

  I thought that the 8200 would support larger disks, but this isn't looking too good. I hope it's something obvious that I forgot.

  Any suggestion would be appreciated.

  Hello

  As I know your Tecra should be able to recognize the 30 GB HARD drive. Maybe update the BIOS may solve the problem. Please on Toshiba download page has the latest BIOS update available.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU

  Good bye

• Disk failure HARD Tecra R950-104

  Hello

  I have a Toshiba Tecra R950-104 with almost a year.
  Everything works fine except the HARD drive.

  In this period (almost on the year), I got 2 hard drive failure (hdd 2 had to be replaced!).
  Fortunately the issues occurs within the warranty period.

  Y at - it problems with this machine, about the drive HARD (it's a 500 GB, 7200 RPM Toshiba HDD).

  Thank you

  Hello

  HARD drive problems do not portable but depend on the use of HARD drive and use of portable.
  The HARD drive is a wearing part. Sooner or later every HARD drive was going to die.

  This problem can occur because the HARD drive is affected by shocks while moving the laptop. In addition, there a lot of different hard drives on the market. Some are less expensive because of the low quality and some HDD cost more because of good quality.

  If you keep the eyes on the quality of the HARD drive.
  But to be honest, I would never buy a laptop HARD drive. I replaced my HARD drive with an SSD. Its much faster and more sustainable as a HARD drive

• replace the HDD SSD

  Dear Sir.

  I want to know how I can replace my HDD SSD

  I have MacBook Pro mid 2012 500 GB I want to change my HARD drive 500 GB

  Can you please guide?

  Kind regards

  Saqib Sallahuddin

  Click here for more information.

  (139267)

• Tecra R950 - Blackscreen

  Tenho um Portatil TECRA R950 - 186 PT53OE, com o operating system Windows 10. Vinha com o SO Win 7, posteriormente actualizei-o para o Win 8 e recently para o Win 10.
  Depois o driver para a versão 10 mouse muito bem. Significativamente better than com a versão 8.1.
  HA ideal dias fiquei sem imagem no display. Seja o ecra preto com or.
  Quando ligo o computador e perfectly is a dinna mensagem: TOSHIBA Leading Innovation >, mas depois fair fico com o ecra preto.
  Tenho trabalhado com ele ligando-lhe um monitor external to porta SVGA.
  JA fiz an atualizacao do driver da placa grafica, mas o problema persists.
  Agradea§o me seja uma Solução apontada.

  Try this:
  uninstall the display driver in Control Panel.
  Run Windows Update to install the new display driver.

• Tecra R950-15F - need to WiFi disabled by deafult

  Hi all

  I'm new to the forum and I have a question whose answer
  I couldn't find on the web and here in the forum (at least with my keywords; please direct me if failed).

  For some time I am owner of a Tecra R950-15E running Win7 Pro 64-bit and am very satisfied with it.
  The only thing that bothers me a bit is the Wi - Fi mode.
  I know that by pressing "FN + F8" I can turn the wireless (WiFi and 3G) modes on and off.

  It seems that by default the wireless modes are turned on after starting the system.
  I would like to have everything turned off by deafult (primarily to conserve battery power) and only turn it on manually when I really need.

  Now I have to do the reverse by turning off manually after the system starts and I have not found a setting to change to my preference.

  Does anyone have an idea to fix it?

  Thank you
  tecra14

  I m very surprised of your question here in the forum, because usually the laptop / system must remember the last State of Wi - Fi.
  This means that Wi - Fi should remain disabled, in which case the WiFi has been disabled just before logging off the power.

  Try reinstalling the driver WLan just to check if it would solve your tiny issue.
  You will need to uninstall the WLan driver before you start a new installation.

• Password at startup TECRA R950

  I have
  The school where I work have a TECRA R950
  When I boot the laptop I have a password (it is not a bios password) but I do not know
  How can I reset this password?
  Thanks for the reply

  When I boot the laptop I have a password (it is not a bios password)

  Why do you think this is not a BIOS password.
  Are you able to access the BIOS by pressing F2?

  If this is not the case, the laptop is secured by password BIOS and this unknown BIOS password can be removed only by the authorized service provider...

  If you do not know the password, you can request assistance from the ASP

• Satellite U940-100 - replace the HDD SSD

  Hello

  I want to change my Sat U940-100 by a SSD HARD drive.
  I can make a perfect copy but when I change the HDD SSD won't.
  Can someone explain me what I have to do?

  I think it has to do with het SSD of 32 GB, which is already inside?
  What I have to change something in the BIOS?

  Thanks in advance

  Dag

  What do you mean it won't? What did you do exactly?

  In my opinion after Exchange of HDD with SSD, you must install the original recovery image and start using your laptop with the 'settings '.

• Tecra R950 fan speed

  Hello

  I have Tecra R950 (PT530A - 00S 001) and find that the fan works almost full/high speed all the time.

  I am running Windows 8.1 and run on the balanced power setting.

  Is it a common problem with this model?

  Someone can give me some info or measures to be taken to diagnose the problem or should I just send it to Toshiba as a guarantee?

  Any help would be appreciated.

  Hello

  I wouldn't say it s common issue because of fan activity depends on its portable use.
  The fact is that the CPU/GPU performance leads to a temperature higher due to the dissipation of the heat and this leads to a stronger fan activity

  There's not a lot of parameters that could be changed next settings in the Windows Advanced Power Options. Here you can change the method of cooling under operation on battery and you can also decrease the max performance of the processor to 100% at a level more down to let's say 80-90%