Site to Site VPN, endpoint of the traffic on the loopback and ping down alternative packages

Similar Questions

• My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  Hi Pedro,

  Make sure that when you design the phone and tablet version to keep in mind the limits of dimensions.

  Please share the url of your site for further analysis.

  Kind regards

  Akshay

• Problems with site-to-site vpn with of the asa 2

  I tried different ways so that this works, but failed. After 8 hours, I literally have a bad headache and have to step away for a minute.  I realize I need to ping between the tunnels mentioned, but still can not to. can someone take a look and tell me where I have gone wrong?  Im trying to configure a site to site vpn between:

  ASA_A

  external interface 5.179.17.66

  inside the interface 10.1.1.1

  ASA B

  external interface 5.81.57.19

  inside the 10.1.2.1 interface

  Frist why do you have two DGs on box -

  Route outside 0.0.0.0 0.0.0.0 5.179.121.65 1

  Route outside 0.0.0.0 0.0.0.0 5.179.17.65 1

  Attach the two end then it should work.

  Thank you

  Ajay

• Change card mother HP Envy H8 - 1437C:-now the HP site doesn't recognize the computer and provide access to updates

  Replaced the motherboard with a new one of the same model and type - the work of the motherboard - but trying to get the Bios and the Board of Directors, updates of HP - model automated search HP software is unable to detect this new motherboard / computer - how to get this motherboard to be detected and updated via the HP website...? Note that it is just after the warranty period so I don't have phone support... the new motherboard works and is what I use now for this announcement...

  Bob, welcome to the forum.

  You will not be able to get updates of software or drivers to Win 10 of the HP Web site.  There is none is available.  Here is a guide that provides HP on this page.  Your best option is to run Windows Update to check updates are available.  Win 10 has built-in many pilots.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Error 651 PPPoE VPN connection after the upgrade and reboot

  I have Win7 and a PPPoE VPN connection working perfectly well until tonight after the upgrade and reboot, the VPN just stopped working and gives an error code 651.  I have nothing newly installed.  What was wrong?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://TechNet.Microsoft.com/en-us/ms772425

• Updates from HP agent... always began in the early and slows down computer

  HP Pavilion a1222n, Win XP Home

  When we move first on the computer, it is slowed down by "updates HP agent running' controlled by the Task Manager.

  I would like to disable the execution the present automatic and run it when I want to run the updates from HP.  I read in another post to go to start > all programs > setting > select never allowing you to a chosen when run the HP update agent.  I can't seem to find it on this machine, the message I read was for another model.

  Thank you

  Ron3033

  Hi Ron,

  Try the following.

  Hold down the Windows key and press R.  In the run box, type msconfig and press to enter.  In the System Configuration window, select the Startup tab and Remove the check mark next to the HP update agent.  Click apply and then click Ok to save the changes and restart the PC for this change to take effect.

  Kind regards

  DP - K

• Latest Vista updates have picked up my use of the internet and slowed down my system

  Last week, I had several automatic updates. In the meantime, updates have been loading on my computer all landed and froze. After the updates, I'll have a terrible time in AOL. The program has slowed down and often gives me an error message that the system is not responding. I contacted AOL who gave me many suggestions that I follow, but I still have problems (more my overall system is slow now). Says to contact Microsoft. It may be a problem with acceleration. I don't have these problems until the updates installed this week.

  Now my system restore no longer works. I can't go back to before the updates. What can I do?

  Hi andrewgpig,

  Thank you for writing to Microsoft answers Community Forums.

  Possible cause would be that updates might conflict with other programs on the computer. Also could have damaged some system files on the computer.

  I suggest to try in safe mode and check the performance of the pc first.

  To start the computer in safe mode, do in the link below

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  If it works fine in safe mode, then find the program that is in conflict. The link below shows you how to do a clean boot

  http://support.Microsoft.com/kb/331796

  If the steps above fail. Try to do a scan sfc

  Try to run a SFC scan, to do this, follow these steps:

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  I hope this helps. .

  Let us know if this doesn't work or if you need further assistance.

  Kind regards

  Sharath

  Microsoft Answers Support Engineer

• I can't get the layers palette to show up. I go to the window and pull down to layers, but nothing appears.

  I used Illustrator in the past, but just updated for cc and added today.  I can't get the layers palette to show up.  Any advice?

  No one can tell you anything without the proper system or other technical details info. Start by resetting the workspace and check your toolbar on the right palettes.

  Mylenium

• Problems with the list of the button and drop-down list

  Hello
  
  I want my users to view revenue by country or city...
  
  to select country I use a "list of the button' and for the city I'm on a 'combo '... When my select user a country, the cities of filtered accordingly... everything works fine, except the following (it is in step 3):
  
  Step 1. When I select a country (let's say canada) report gives me an appropriate set of data...
  Step 2. When I filter in a city (let's say Toronto) everyting works very well according to the filter...
  Step 3. When I select another country (let's say the USA), I get no data displayed on my report but good news, it's that my drop down the city will update accordingly
  Step 4. to get the required data, I have to change city (let's say Chicago)...
  
  
  what I want is that when my user select another country (step 3)... then the report should display data for all cities and I used the logical
  
  Select rev table_country
  where
  (b.City =
  CASE
  When: P49_CITY = 'ALL' THEN b.City
  OTHERWISE: P49_CITY END)
  
  somehow, I want the P49_CITY to 'ALL' value when the user selects a country
  
  Please advice

  Hello

  This is the way of simply to do.

  1 make the country select list (P49_COUNTRY) a select list with submit
  2. create a conditional branch that dates back to the 49 Page
  3 do the conditional branch of type PL/SQL Expression. In the expression 1 enter

  :REQUEST = 'P49_COUNTRY';
  

  4. in the value of these items , enter P49_CITY and let these values in white.

  So when the country is changed the page will be submitted, take over the management of the status of the page and in the process put the city at null.

  Kind regards

• Metric of the answer and always "Down".

  I use a very simple answer / statute that is supposed to be collected with the Snmp Fetchlet. When I look at 'Targets Down' I see "the value of Status is 1". It used to be zero, but I patched up things. Nevertheless, the Employment Committee is still announced my system as 'Down' with a big red arrow :-(
  
  I hope you'll excuse some of my naivety, I'm making progress, but I'm still new to plugin development. The browser of the metric is kind of alien to me, I think that would help but I cannot have a simple 'How To' for her that weaves me through all the directories and the installation program.
  
  And so, I'm going straight into the network with my plugin Manager:
  
  I use the OID that could identify the name of the system for the measurement of the response: 1.3.6.1.4.1.42.2.225.1.4.1.0
  
  When I snmpwalk I get my kind of back, system name of what I expected:
  -bash-3, 00 #. / snmpwalk - Os - v1-c 172.20.67.73 public 1.3.6.1.4.1.42.2.225.1.4.1.0
  Enterprises.42.2.225.1.4.1.0 = STRING: isv-"mysystem".
  
  My admin.metadata essentially looks like this (with some names have been changed)
  
  < NAME metric = 'Response' TYPE = "TABLE" >
  < display >
  < NLSID label = "sun_response" > answer < / Label >
  < / display >
  < TableDescriptor >
  < ColumnDescriptor NAME = 'Status' TYPE 'NUMBER' = >
  < display >
  < NLSID label = "sun_resp_status" > status < / Label >
  < / display >
  < / ColumnDescriptor >
  < / TableDescriptor >
  < QueryDescriptor = "Snmp" FETCHLET_ID >
  < property NAME = "NAME" SCOPE = "INSTANCE" > NAME < / property >
  < property NAME = "hostname" SCOPE = "INSTANCE" > AgentHost < / property >
  < property NAME = 'COMMUNITY' SCOPE = "INSTANCE" option = "TRUE" > CommunityString < / property >
  < property NAME = "TIMEOUT" SCOPE = "INSTANCE" option = "TRUE" > Timeout < / property >
  < property NAME 'PINGMODE' SCOPE = 'GLOBAL' = > TRUE < / property >
  < property NAME = 'TABLE' SCOPE 'GLOBAL' = > FALSE < / property >
  < property NAME = 'OID' SCOPE = 'GLOBAL' > 1.3.6.1.4.1.42.2.225.1.4.1.0 < / property >
  < / QueryDescriptor >
  < / metric >
  
  Here's the instance property definition
  < InstanceProperties >
  < InstanceProperty NAME = "AgentHost" CREDENTIAL = 'FALSE' optional = "FALSE" >
  < display >
  < NLSID label = "sun_storage_7000_agent_host" > name of host or IP address < / Label >
  < / display >
  < / InstanceProperty >
  < InstanceProperty NAME = "CommunityString" = "TRUE" = "TRUE" optionally CREDENTIAL >
  < display >
  < NLSID label = "sun_storage_7000_community_string" > SNMP Read community string (default: public) < / Label >
  < / display >
  public
  < / InstanceProperty >
  < InstanceProperty NAME = "Timeout" CREDENTIAL = 'FALSE' optional = "FALSE" >
  < display >
  < NLSID label = "sun_storage_7000_timeout" > the SNMP timeout (default: 5 seconds) < / Label >
  < / display >
  5
  < / InstanceProperty >
  < / InstanceProperties >
  
  And the admin.default_collection was all deleted thresholds:
  < CollectionItem NAME = 'Response' >
  < schedule >
  < INTERVAL '5' TIME_UNIT = IntervalSchedule = 'Min' / >
  < / schedule >
  < / CollectionItem >

  There should be a Condition for the status column of the CollectionItem. The Condition is what will tell the system (via warnings) when the target is upwards and downwards.

• multi-site VPN with just the cisco vpn client

  Hello everyone

  Please I need your help.

  We have a headquarters office and up to 60 is BranchOffice, we want to create VPN network between its. so let's deploy 2 router cisco esy vpn server with HA (HSRP) at the Headquarters Office and all branches have Connection ADSL and they will use just the cisco vpn client to connect to the Headquarters Office.

  My question is: is it possible to do it just with the client vpn cisco without purchased for any exercise bracnh a cisco router to create an ipsec tunnel because it is so expensive?

  It depends on if the routers to offices can handle NAT with several internal VPN clients to 1 IP address. Most of the new material should be fine. Keep in mind the maximum limit of the VPN client, with 60 agencies and 5 people each of whom you are above the limit.

  Michael

  Please note all useful posts

• help sites Web copy to the Clipboard, and then paste it on Facebook

  Hello...

  How can I copy and paste all the web pages I want to paste it into Facebook. In my Touchpad.

  When I click on the address of the Web site, at the top of the page, it, correctly, highlights the entire address, however, in the drop down menu, on the left, there is no option exemplary editing past etc.

  In addition, the only other way I found, is to try to send the link, then try to copy the link in the email send, however, that e-mail is the name of the web page text, providing a link to the page. So I can not stick to Facebook from the email.

  Am I mistaken.

  can I ask function to copy the web address to the Clipboard.

  Also is there an easy way to copy the web address on the Clipboard so you can paste facebook.

  Thank you. :-)

  Here's how:

  Press and hold on the link.  Depending on how long you hold that it can produce two results - for me, this usually points to the whole link then keyboard appears and the cursor go to the link.  Not a problem, now tap and hold your finger there until the bubble 'Select Select all stick them' opens.  Tap "select all" and the link has been copied to the Clipboard.  To where you want that it stuck and just hold your finger on the screen until the bubble even opens.  Choose 'Paste' and the link.

  From time to time, it works as it should - press and hold the link, it becomes yellow, tap again and the 'Copy' option bubble will appear.  I think that it depends on to know if the keyboard is displayed when you press the link.  Keyboard upwards and you touch & hold = "cut copy paste" dialog, keyboard facing downwards = the dialog box "select Select all paste them.

  HTH,

  WyreNut

• Every second a link or I click on getting me to unwanted redirected Web sites, Ive tried all the antiwormspyware and it does not happen with Chrome or IE

  For the last few months since I've updated last Firefox when I do a search on google for the most part, but sometimes of other links too sometimes. I click on a link and more than half the time it redirects me to websites virus, pirates, games of chance or porn. Ive tried to find a worm or a malware with all known antivirus-antispyware programs, but nothing. I know it takes some malware or trojan but can you tell me are you aware of this and if so how can I get rid of him. I prefer to use Firefox for Chrome, but it can't on Chrome, so it must be a specific problem of Firefox

  It could be from a malicious add-on or 'search bar' which has installed without your permission. Check your add-ons to see if you have no matter what you do not recognize. Also, are you using any "bars," extra in addition to your navigation/menu/bookmarks bars? Sometimes adware disguised as research tools for your browser.

• I am filling a form from a web site of veterans of the Kansas and the form does not allow me to enter the necessary information.

  Is there a program that I need to download the form?

  Hello larrylightfoot,

  ·         What type of form you received?

  ·         How did you receive this form?

  ·         What happens when you try to open the form?

  ·         What is the file extension or the form that you received?

  If the form needs no associated program to open it, then you will need to install the program to be able to open the form. For example, if the form you received is in PDF format you need Acrobat to open the form.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• How to put facilities in the trade and specifications of materials package specification?

  
  Hi support them.

  When BOM is imported in the ERP, one or more facilities are needed to define in the LES. Currently, only the specification of Formulation contains information of facilities. If the BOM contains information of Formulation, trade and specification of package of materials, how to define these facilities in trade and material package specifications? What is the best practice?

  Thank you.

  Terry

  You should use approvals of sourcing for the use case.   Facilitated the formulation information section is here so you can specify (x) manufacturing what is intended for the recipe for the site.