Site to Site VPN license

Hello

On the SAA under version show, I can see

VPN - A: enabled

VPN peers: 5000

WebVPN peers: 2

Is the above is sufficient to enable site-to-site vpn feature or I need to buy another license.

Thank you.

That should suffice for you will activate the VPN site-to-site connections.

HTH

Rick

Tags: Cisco Security

Similar Questions

Site to site VPN works only on Cisco 881

I have 2 problems with a cisco 881. The first problem is that Vlan2 (192.168.5.xx) cannot access the internet on the outside. But I know that the router has internet, because I can ping the external ip address. The 2nd problem is that I have a set of site to another upward, but when I test the Site to site I get this error:

destination of traffic of the tunnel must be channelled through the crypto map interface. The destination following (s) doesn't have a routing entry in the routing table
192.168.2.0

I copied the config form this router from another cisco 881 work, where everything works. The only difference is that this router needs a site to site vpn connection.

My question is how I can get internet on vlan2 and who can I solve the connection to site to site.

Here's the running configuration:

Building configuration...

Current configuration: 12698 bytes
!
version 15.3
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname Cisco_881
!
boot-start-marker
boot-end-marker
!
AQM-registry-fnf
!
logging buffered 51200 warnings
!
AAA new-model
!
!
AAA authentication login default local
AAA authorization exec default local
AAA authorization network default local
!
!
!
!
!
AAA - the id of the joint session
!
Crypto pki trustpoint TP-self-signed-1151531093
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1151531093
revocation checking no
rsakeypair TP-self-signed-1151531093
!
Crypto pki trustpoint TP-self-signed-2011286623
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2011286623
revocation checking no
rsakeypair TP-self-signed-2011286623
!
!
TP-self-signed-1151531093 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31313531 35333130 6174652D 3933301E 170 3135 30343031 31363230
34315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 31353135 65642D
33313039 3330819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100AC6E E7FA8AFD 9D4E206C 2B23DFC1 990AFDB3 98CD84A7 37697253 A7EF2520
0C45190E 298B6E9F E2711580 80DCFBFB 05A6A0BA 347B960B D9DA17FC B1543B9D
FBC048F3 063EBBC5 02391432 F0232A73 EAC7278E 8CB83005 D13A1D47 BEF18198
A 547469, 2 F65ED0E6 249BF517 1E74117D C94BE542 46EE487D A3843F12 364639B 4
0B 090203 010001 HAS 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 147996F4 3E6D0EE2 2D9065BB D726137C 2DF42ABE 01301D 06
03551D0E 04160414 7996F43E 6D0EE22D 9065BBD7 26137C2D F42ABE01 300 D 0609
2A 864886 F70D0101 8181002A 05050003 677B9BE6 CB60D188 73227C4B 2DC33101
BD448017 EDEF0296 FF7438A3 4C46519B 144C775F 1429CF06 7DB29F2D EB16EE75
22100B 63 0D75511A 98DC57DC EF87BED2 1C1635C8 B5352706 3963037A 4E9B739A
3A1EC9BE 8431BD70 116D3B31 E4A2AC4C 0F934B3F 196AF829 AD537005 6935B 451
EB31DB3F A9BA6D70 65B70D19 D00158
quit smoking
TP-self-signed-2011286623 crypto pki certificate chain
no ip source route
!
!
!
!

!
DHCP excluded-address IP 10.10.10.1
DHCP excluded-address IP 192.168.5.1 192.168.5.49
DHCP excluded-address IP 192.168.5.150 192.168.5.254
!
DHCP IP CCP-pool
import all
Network 10.10.10.0 255.255.255.248
default router 10.10.10.1
Rental 2 0
!
IP dhcp Internet pool
network 192.168.5.0 255.255.255.0
router by default - 192.168.5.254
DNS-Server 64.59.135.133 64.59.128.120
lease 6 0
!
!
!
no ip domain search
"yourdomain.com" of the IP domain name
name of the IP-Server 64.59.135.133
name of the IP-Server 64.59.128.120
IP cef
No ipv6 cef
!
!
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
udi pid C881-K9 sn FTX18438503 standard license
!
!
Archives
The config log
hidekeys
username * privilege 15 secret 5 $1$IBY.$X5/iqYy47a5vAWWuG4/Oa/
username * secret 5 $1$ 17 ST$ QzJMvQnZ9Q.1y7u0rYXFa0
username * secret 5 $1$ L4W9$ zBKpawZ3i5nXxwyS9H6Lf1
!
!
!
!
!
no passive ftp ip
!
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 2
!
crypto ISAKMP policy 2
BA 3des
preshared authentication
Group 2
isakmp encryption key * address 208.98.212.xx
!
Configuration group crypto isakmp MPE client
key *.
pool VPN_IP_POOL
ACL 100
include-local-lan
10 Max-users
netmask 255.255.255.0
banner ^ practive entered the field

This area is reserved for administrators of control systems.

If you are here by mistake, please disconnect immediately.

You have full access to 192.168.125.0 / 0.0.0.255

Support on continue to start your session. ^ C
!
Configuration group customer crypto isakmp PALL
key *.
pool VPN_IP_POOL_PALL
ACL 101
include-local-lan
Max - 1 users
netmask 255.255.255.0
banner ^ practive entered the field

This area is limited to the PALL access only.

If you are here by mistake, please disconnect immediately.

You have full access to 192.168.125.0 / 0.0.0.255

Support on continue to start your session. ^ C
ISAKMP crypto profile vpn_isakmp_profile
game of identity EMT group
client authentication list default
Default ISAKMP authorization list
client configuration address respond
virtual-model 1
ISAKMP crypto profile vpn_isakmp_profile_2
match of group identity PALL
client authentication list default
Default ISAKMP authorization list
client configuration address respond
virtual-model 2
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac VPN_TRANSFORM
tunnel mode
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
tunnel mode
!
Profile of crypto ipsec VPN_PROFILE_MPE
Set the security association idle time 3600
game of transformation-VPN_TRANSFORM
vpn_isakmp_profile Set isakmp-profile
!
Profile of crypto ipsec VPN_PROFILE_PALL
Set the security association idle time 1800
game of transformation-VPN_TRANSFORM
vpn_isakmp_profile_2 Set isakmp-profile
!
!
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to208.98.212.xx
the value of 208.98.212.xx peer
game of transformation-ESP-3DES-SHA
match address 102
!
!
!
!
!
!
interface Loopback0
IP 192.168.40.254 255.255.255.0
!
interface FastEthernet0
no ip address
!
interface FastEthernet1
no ip address
!
interface FastEthernet2
switchport access vlan 2
no ip address
!
interface FastEthernet3
switchport access vlan 2
no ip address
!
interface FastEthernet4
IP address 208.98.213.xx 255.255.255.224
IP access-group 111 to
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
map SDM_CMAP_1 crypto
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel VPN_PROFILE_MPE ipsec protection profile
!
tunnel type of interface virtual-Template2
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel VPN_PROFILE_PALL ipsec protection profile
!
interface Vlan1
Description of control network
IP 192.168.125.254 255.255.255.0
IP access-group CONTROL_IN in
IP access-group out CONTROL_OUT
IP nat inside
IP virtual-reassembly in
IP tcp adjust-mss 1452
!
interface Vlan2
Description Internet network
IP 192.168.5.254 255.255.255.0
IP access-group INTERNET_IN in
IP access-group out INTERNET_OUT
IP nat inside
IP virtual-reassembly in
!
local IP VPN_IP_POOL 192.168.40.100 pool 192.168.40.150
local IP VPN_IP_POOL_PALL 192.168.40.151 pool 192.168.40.152
IP forward-Protocol ND
IP http server
23 class IP http access
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
!
IP nat inside source static tcp 192.168.125.2 25000 25000 FastEthernet4 interface
IP nat inside source overload map route SDM_RMAP_1 interface FastEthernet4
IP route 0.0.0.0 0.0.0.0 FastEthernet4 permanent 208.98.236.xx
!
CONTROL_IN extended IP access list
Note the access control
Note the category CCP_ACL = 17
allow any host 192.168.125.254 eq non500-isakmp udp
allow any host 192.168.125.254 eq isakmp udp
allow any host 192.168.125.254 esp
allow any host 192.168.125.254 ahp
IP 192.168.125.0 allow 0.0.0.255 192.168.125.0 0.0.0.255
Note the VPN access
IP 192.168.125.0 allow 0.0.0.255 192.168.40.0 0.0.0.255
Note Access VNC
permit tcp host 192.168.125.2 eq 25000 one
Comment by e-mail to WIN911
permit tcp host 192.168.125.2 any eq smtp
Note DNS traffic
permit udp host 192.168.125.2 host 64.59.135.133 eq field
permit udp host 192.168.125.2 host 64.59.128.120 eq field
Note Everything Else block
refuse an entire ip
CONTROL_OUT extended IP access list
Note the access control
IP 192.168.125.0 allow 0.0.0.255 192.168.125.0 0.0.0.255
Note the VPN access
ip permit 192.168.40.0 0.0.0.255 192.168.125.0 0.0.0.255
Note Access VNC
allow any host 192.168.125.2 eq 25000 tcp
Comment by e-mail to WIN911
allow any host 192.168.125.2 eq smtp tcp
Note DNS responses
allowed from any host domain eq 192.168.125.2 udp
Note deny all other traffic
refuse an entire ip
INTERNET_IN extended IP access list
Note Access VNC on VLAN
allow any host 192.168.125.2 eq 25000 tcp
Note block all other controls and VPN
deny ip any 192.168.125.0 0.0.0.255
deny ip any 192.168.40.0 0.0.0.255
Note leave all other traffic
allow an ip
INTERNET_OUT extended IP access list
Note a complete outbound Internet access
allow an ip
WAN_IN extended IP access list
allow an ip host 207.229.14.xx
Note PERMIT ESTABLISHED TCP connections
allow any tcp smtp created everything eq
Note ALLOW of DOMAIN CONNECTIONS
permit udp host 64.59.135.133 eq field all
permit udp host 64.59.128.120 eq field all
Note ALLOW ICMP WARNING RETURNS
allow all all unreachable icmp
permit any any icmp parameter problem
allow icmp all a package-too-big
allow a whole icmp administratively prohibited
permit icmp any any source-quench
allow icmp all once exceed
refuse a whole icmp
allow an ip
!
auto discovering IP sla
not run cdp
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 103
!
access-list 1 remark out to WAN routing
Note CCP_ACL the access list 1 = 16 category
access-list 1 permit 192.168.125.2
access-list 1 permit 192.168.5.0 0.0.0.255
Note access-list 23 SSH and HTTP access permissions
access-list 23 permit 192.168.125.0 0.0.0.255
access-list 23 permit 192.168.40.0 0.0.0.255
access-list 23 allow one
Note access-list 100 VPN traffic
access-list 100 permit ip 192.168.125.0 0.0.0.255 any
access-list 100 permit ip 192.168.40.0 0.0.0.255 any
Note access-list 101 for PALL VPN traffic
access-list 101 permit ip 192.168.125.0 0.0.0.255 any
Note access-list 102 CCP_ACL category = 4
Note access-list 102 IPSec rule
access-list 102 permit ip 192.168.5.0 0.0.0.255 192.168.2.0 0.0.1.255
Note access-list 103 CCP_ACL category = 2
Note access-list 103 IPSec rule
access-list 103 deny ip 192.168.5.0 0.0.0.255 192.168.2.0 0.0.1.255
access-list 103 allow ip 192.168.5.0 0.0.0.255 any
access-list 103 allow the host ip 192.168.125.2 all
Note access-list 111 CCP_ACL category = 17
access-list 111 permit udp any host 208.98.213.xx eq non500-isakmp
access-list 111 permit udp any host 208.98.213.xx eq isakmp
access-list 111 allow esp any host 208.98.213.xx
access-list 111 allow ahp any host 208.98.213.xx
Note access-list 111 IPSec rule
access-list 111 permit ip 192.168.2.0 0.0.1.255 192.168.5.0 0.0.0.255
Note access-list 111 IPSec rule
access-list 111 permit ip 192.168.2.0 0.0.1.255 192.168.4.0 0.0.1.255
access-list 111 permit udp host 208.98.212.xx host 208.98.213.xx eq non500-isakmp
access-list 111 permit udp host 208.92.12.xx host 208.92.13.xx eq isakmp
access-list 111 allow esp host 208.92.12.xx host 208.92.13.xx
access-list 111 allow ahp host 208.92.12.xx host 208.92.13.xx
access-list 111 permit icmp any host 208.92.13.xx
access-list 111 permit tcp any host 208.92.13.xx eq 25000
access-list 111 permit tcp any host 208.92.13.xx eq 22
access-list 111 permit tcp any host 208.92.13.xx eq telnet
access-list 111 permit tcp any host 208.92.13.xx eq www
!
!
!
control plan
!
!
!
MGCP behavior considered range tgcp only
MGCP comedia-role behavior no
disable the behavior MGCP comedia-check-media-src
disable the behavior of MGCP comedia-sdp-force
!
profile MGCP default
!
!
!
!
exec banner ^ C
% Warning of password expiration.
-----------------------------------------------------------------------

Unplug IMMEDIATELY if you are not an authorized user
^ C
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
access-class 23 in
password *.
transport input telnet ssh
transportation out all
line vty 5 15
access-class 160 in
password *.
transport of entry all
transportation out all
!
max-task-time 5000 Planner
Scheduler allocate 20000 1000
!
end

Thank you.

It seems that DNS has failed, because it is indeed happened to internet, but it does not work when internet DNS resolution.

Go ahead and try to ping this 157.166.226.25, and it's on the browser http://157.166.226.25/, CNN.com. Let's try those. Also just in case where to configure a DNS SERVER on your router.

- http://www.cisco.com/c/en/us/support/docs/ip/domain-name-system-dns/2418...

Disable any ZBF just in case.

David Castro,

Kind regards

Site to Site VPN Cisco IOS 1941 15.0 (1) M1

Hello

I am currently developing a Site VPN site between an ASA and a router in 1941. Configuring VPN on the SAA seems to be ok, because it works without problem with router 1841 with IOS 12.4 to the other site. The same VPN configuration on the new router in 1941 with M1 IOS 15.0 (1) does not work. It seems that the access to the crypto map list is the problem. The router never start the VPN connection. When the ASA attempts to establish the VPN, the debugging of the router log shows:

...

* 14:37:52.263 may 5: ISAKMP: (1007): proposal of IPSec checking 1
* 14:37:52.263 may 5: ISAKMP: turn 1, ESP_3DES
* 14:37:52.263 may 5: ISAKMP: attributes of transformation:
* 14:37:52.263 may 5: ISAKMP: type of life in seconds
* 14:37:52.263 may 5: ISAKMP: life of HIS (basic) of 28800
* 14:37:52.263 may 5: ISAKMP: type of life in kilobytes
* 14:37:52.263 may 5: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0
* 14:37:52.263 may 5: ISAKMP: program is 1 (Tunnel)
* 14:37:52.263 may 5: ISAKMP: authenticator is HMAC-SHA
* 14:37:52.263 may 5: ISAKMP: group is 2
* 14:37:52.263 may 5: ISAKMP: (1007): atts are acceptable.
* 5 May 14:37:52.263: ISAKMP: (1007): IPSec policy invalidated proposal with error 32
* 5 May 14:37:52.263: ISAKMP: (1007): politics of ITS phase 2 is not acceptable! (local... remote control...)

...

Any clue?

Concerning

Claudia

The configuration of the router:

version 15.0
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname Cisco1941
!
No aaa new-model
!
No ipv6 cef
no ip source route
IP cef
!
IP domain name xyz.de
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki trustpoint TP-self-signature-...
!
TP-self-signature-... crypto pki certificate chain
quit smoking
license udi pid CISCO1941/K9 sn...
!
username privilege 15 secret 5 xyz $1$...
!
redundancy
!
session of crypto consignment
!
crypto ISAKMP policy 10
BA 3des
preshared authentication
Group 2
ISAKMP crypto key... address 1.2.3.4
invalid-spi-recovery crypto ISAKMP
!
Crypto ipsec transform-set esp-3des esp-sha-hmac tsAsa
!
ASA 10 ipsec-isakmp crypto map
defined peer 1.2.3.4
Set transform-set tsAsa
PFS group2 Set
match address 100
!
interface GigabitEthernet0/0
Description * inside *.
IP 10.100.100.1 255.255.255.0
automatic duplex
automatic speed
!
!
interface GigabitEthernet0/1
IP 5.6.7.8 255.255.255.240
IP access-group 111 to
no ip-cache cef route
no ip route cache
automatic duplex
automatic speed
card crypto asa
!
!
ATM0/0/0 interface
no ip address
Shutdown
No atm ilmi-keepalive
!
!
IP forward-Protocol ND
!
IP route 0.0.0.0 0.0.0.0 1.2.3.5
!
access-list 100 permit ip 10.100.100.0 0.0.0.255 10.10.10.0 0.0.0.255
access-list 111 allow esp 1.2.3.4 host 5.6.7.8
access-list 111 permit udp host 1.2.3.4 host 5.6.7.8 eq isakmp
access-list 111 allow ahp host 1.2.3.4 5.6.7.8
access-list 111 deny ip any any newspaper

....

end

Try to do this:

IP route 10.10.10.0 255.255.255.0 interface Ge0/1

Route IP 1.2.3.4 255.255.255.255 by default-gateway-to-Ge0/1

The rest of your config looks very good.

You try to run a Site to site VPN and remote VPN from the same IP remotely

We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

Hi John,.

Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

CSCuc75090 Details of bug

The crypto IPSec Security Association are created by dynamic crypto map to static peers

Symptom:

When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

Conditions:

It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

Workaround solution:

N/A

Some possible workarounds are:

Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

Below some information:

http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

Hope this helps,

Luis.

Site to Site VPN number

Hello

I am facing a problem in my site to site VPN configuration, router management site gets the address public IP of the DHCP server as I have built a dynamic crypto map on the router HQ

First phase ISAKMP is operational running, I am trying to ping the LAN 192.168.85.0 for the HQ 172.16.12.0 LAN but it won't go through and when I check the ipsec security associations I can see that packets are encrypted on the side of the branch and decrypted on the side of HQ but the HQ router no PING response at all and he saw not encrypted packets

I have attached my configurations, I had to hide some information just for safety

Help, please!

Mostafa

Hello Mustafa,

Havinf a glance at your config, it seems you have not correctly configured on your HQ NAT exemption.
```
 ip access-list extended NAT deny ip 172.16.12.0 0.0.0.255 192.168.75.0 0.0.0.255 deny ip 172.16.12.0 0.0.0.255 172.16.20.0 0.0.0.255 permit ip 172.16.12.0 0.0.0.255 any deny ip 172.16.12.0 0.0.0.255 192.168.85.0 0.0.0.255
```
In this interesting ACL traffic is refused in the last. So it is not exempted from NAT, as ACL are processed in top-down, your valuable traffic is already matching permit statement in NAT ACL therefore subject to NAT on HQ. Refuse the declaration of exemption, interesting traffic NAT should precede the statement of license.

HTH

"Please note useful posts.

Problem with Site-to-Site VPN. VPN tunnel is broken but can ping

OK, so I am trying to understand why I can't not only appears when I sh crypto isakmp his or sh crypto ipsec his. I did the basic to site vpn settings to another and I can't ping on both networks fine no problem. So, when I ping from one pc to the address 172.16.0.0 192.168.0.0 network network there is no problem at all because the pings are very well received. But when I go to sh crypto isakmp sa, there's simply nothing and I can't for the life of understand me why. I watched my sh run for both routers and all seems well, but I guess I could be overlooking something. I would really appreciate if someone could help me to diagnose this problem.

I've attached my plotter file of package and two routers use the binary password. I also have the sh run two routers also attached.

I'm not on any of the router 172.16.0.0/24 only 172.16.0.0/16 and I think that is the question.

In Crypto ACL you have on the router of branch:

!

S2S-VPN-TRAFFIC extended IP access list

Licensing ip 192.168.0.0 0.0.0.255 172.16.0.0 0.0.0.255

If it should not be:

!

S2S-VPN-TRAFFIC extended IP access list

Licensing ip 192.168.0.0 0.0.0.255 172.16.0.0 0.0.255.255

and coursed mirrored on the main router.

If this isn't the case, you are saying that some ping between 192.168.0.x and 172.16.0.x is going ok. Can you please indicate exactly that one? I could see that you have attached a package tracer, but I couldn't open it.

IPsec site to Site VPN on Wi - Fi router

Hello!

Can someone tell me if there is a router Netgear Wi - Fi that can form IPsec Site to Site VPN connection between 2 Wi - Fi routers via the WAN connection?

I know that this feature exists on the Netgear firewall, but can you have the same function on any Wi - Fi router?

See you soon!

Michael

I suspect that.

Thank you very much for the reply.

See you soon!

Site to site VPN, I need all internet traffic to exit the site.

I have 2 sites connected via a pair of SRX5308

A = 192.168.1.0/24

IP WAN = 1.1.1.1

B = 192.168.2.0/24

IP WAN = 2.2.2.2

Now what I need to do, is to have all traffic from B to go to the site one even traffic destined to the internet. That is, I need internet traffic out of our network with the IP 1.1.1.1, even if it is from the network B.

On my I have set up a route 1.1.1.1 of the ISP, then a value by default 0/0 to 192.168.1.1 it ASA knows how to get to the peer VPN is a more specific route, but sends everything above the tunnel, at the remote end which then hairpin of ASA routes internet outside its own WAN port traffic.

I can understand though not how to so the same thing on the pair of SRX5308 they either don't raise the tunnel or internet route to the local site address B.

Anyone have any ideas?

I need to do this because we are logging and monitoring of internet traffic to A site via tapping from upstream to various IDS solutions and will not (cannot) reproduce this to all our remote sites.

Thank you

Dave.

After some more thought and testing I came up with a workable solution to my own problem. I'll share it here in case it can help others.

(1) use the wizard at both ends to implement a normal VPN that connects the two segments of network 192.168.1.0 and 192.168.2.0

(2) go to site VPN - VPN policy remote router192.168.2.1 and click Edit

(a) disable Netbios

(b) select "None" from the drop-down list the remote IP address.

(c) to apply the change

3) go to the VPN-> VPN policy on the head end site (192.168.1.1) and click Edit

(a) disable Netbios

(b) select "None" from the drop-down list the local IP address

(c) to apply the change

Now all the traffic wil go down the VPN tunnel and exit to the internet on the site of head end. Hope this helps others with the same question.

Site to Site VPN on AZURE

I have a VPN site-to-site existing on Azure and Azure a new subnet created on the local network that must be able to reach.

I added the new subnet within azure for the VPN and add a static route on the RRAS server win 2012 for routing.

On the initial installation of a RRAS-Site VPN site (I didn't configure it) I think the interesting traffic specified must be sent through the VPN Tunnel, but I knew how to specify the new subnet via RRAS, I don't want to delete and re-create the VPN Site to Site.

Y at - there anyone who can help please.

Thank you

Philippe

Hello

Your question is beyond the scope of this community.

I suggest that repost you on the Azure MSDN Forums:

https://social.msdn.Microsoft.com/forums/azure/en-us/home?category=windowsazureplatform

TechNet forums Azure:

https://social.technet.Microsoft.com/forums/azure/en-us/home?category=windowsazureplatform

TechNet Server forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

TechNet forums:

https://social.technet.Microsoft.com/forums/en-us/home

MSDN forums:

https://social.msdn.Microsoft.com/forums/en-us/home

See you soon.

SBS 2008 office1 Serv2008 Office 2 need to share assets between them via a site to site VPN tunnel

Hi all.

I really need help on this one.

The office 1 installer running SBS2008 Office 2 running Server 2008.

Each firm has its own FQDN Office 1 CompanyABC 2 A_B_C of the company office.

Each firm has its own internal IP address pool Office 1 192.168.69.xxx and office 192.168.20.xxx 2.

Site to site VPN tunnel between 2 office routers Netgear SRX5308 1 and 2 Netgear FVS318G Office established and working.

Each firm has its own DNS server and acts as a domain controller

How to configure the 2 networks to see each other and be able to use assets on every network (files, printers)?

Is it so simple that the addition of another pool internal IP for each DNS server?

Thanks in advance for your help.

Hello

Your Question is beyond the scope of this community.

I suggest that repost you your question in the Forums of SBS.

https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

"Windows Small Business Server 2011 Essentials online help"

https://msdn.Microsoft.com/en-us/library/home-client.aspx

TechNet Server forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

site to site vpn configuration

I have windows server with two sites in different locations and that you want to configure a site to site vpn, how to configure

Here is the Vista Forums.

http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

Try server communities.

See you soon.

Mick Murphy - Microsoft partner

IPSec Site to Site VPN Solution needed?

Hi all

I need a solution to provide full connectivity to one of my clients. I created two IPSEC Site to Site VPN, one between the INFO and RITA and second between NIDA and RITA. I can access RITA machine that is 172.16.36.101 at the INFO and 10.0.0.5 to NIDA.

Now, I need to give access to my customer INFORMATION to direct NIDA 10.0.0.5 without established VPN machine to NIDA 10.0.0.5 of 172.16.36.101 access.

Could you please give me the solution how is that possible?

Concerning

Uzair Hussain

Hi uzair.infotech,

Looks like you need to set up a grouping between the 3 sites, at the end of that your topology will look like this:

INFO - RITA - NIDA

You can check this guide that explains step by step how to configure grouping:

https://supportforums.Cisco.com/document/12752536/how-configure-site-sit...

Hope this info helps!

Note If you help!

-JP-

site to site VPN

SH running-config crypto

I have the following configuration, in order to create a site to site vpn which should not be changed in the configuration below.

Do I need to add new card crypto?

And what is the dynamic-map

I need to create new ipsec transform-set or can I use the existing?

Crypto ipsec transform-set esp-3des esp-sha-hmac ikev1 remoteaccess

Crypto ipsec transform-set esp-3des esp-sha-hmac L2Lvpn ikev1

Crypto ipsec kilobytes of life - safety 999608000 association

Crypto ipsec pmtu aging infinite - the security association

Crypto-map dynamic Test 1 set pfs Group1

Crypto-map dynamic Test 1 set transform-set remoteaccess L2Lvpn ikev1

Crypto-map dynamic 1jeu reverse-Road Test

card crypto Test 1-isakmp ipsec dynamic test

Test interface card crypto outside

Crypto ca trustpoint _SmartCallHome_ServerCA

Configure CRL

Crypto ca trustpoint ASDM_TrustPoint0

Terminal registration

name of the object CN = TestFW

Configure CRL

trustpool crypto ca policy

crypto isakmp identity address

Crypto ikev1 allow outside

IKEv1 crypto policy 1

preshared authentication

3des encryption

sha hash

Group 2

life 10800

IKEv1 crypto policy 10

preshared authentication

3des encryption

md5 hash

Group 2

life 1800

IKEv1 crypto policy 65535

preshared authentication

3des encryption

sha hash

Group 2

life 1800

tunnel-group x.x.x.x type ipsec-l2l

tunnel-group ipsec-attributes x.x.x.x

IKEv1 pre-shared-key *.

Thank you

bluesea2010,

Next step will be sending real traffic, or just run a package Tracker to ensure that traffic flows very well:

entry Packet-trace within the icmp 192.168.15.x 8 0 172.10.10.x detail

If all goes well, you should be good to go.

Hope this info helps!

Note If you help!

-JP-

Improve SA540 site to site VPN perforamce

Site has SA540: 50 M / 50 M DSL (country A) (15 users)

Site B SA540: 2 M / 520KB ADSL (country B) (10 users)

MTU: 1464 (Test on frame of ping)

We custom applications and server work on port 80 of services, it comes to legacy applications and need to call the java prompt back.

We do server on Site A and alos configuration port front of WAN custome application server.

I find the Site B use direct http services over the Wan just need 5-10 seconds to launch the applaciton

On the same machine, we use the site to site VPN to connect to the application, that it will take about 15 ~ 20 seconds or more, alos sometimes cannot load success via VPN enforcement, how can I improve it? Or participate in any suggestion that I have to pay?

Thank you

Hi yururuhgftdy, your vpn is only as good as the slowest connections. If you want to improve performance, update the connection from the other end.

-Tom
Please mark replied messages useful

Troubleshooting IPSec Site to Site VPN between ASA and 1841

Hi all

in the past I've implemented several VPN connections between the devices of the SAA. So I thought a site link between an ASA site and 1841 would be easier... But it seems I was mistaken.

I configured a VPN Site to Site, as it has been described in the Document ID: SDM 110198: IPsec Site to Site VPN between ASA/PIX and an example of IOS Router Configuration (I have not used SDM but CCP).

I have run the wizards on the ASA with ASDM and the current IOS version 15.1 1841, with CCP.

It seems to Phase 1 and 2 are coming although my ASA in ADSM reports (monitoring > VPN > VPN statistics > Sessions) a tunnel established with some of the Tx traffic but 0 Rx traffic),

On the ASA:

Output of the command: "sh crypto ipsec its peer 217.xx.yy.zz.

address of the peers: 217.86.154.120
Crypto map tag: VPN-OUTSIDE, seq num: 2, local addr: 62.aa.bb.cc

access extensive list ip 192.168.37.0 outside_2_cryptomap_1 allow 255.255.255.0 172.20.2.0 255.255.255.0
local ident (addr, mask, prot, port): (LAN-A/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (LAN-G/255.255.255.0/0/0)
current_peer: 217.xx.yy.zz

#pkts program: 400, #pkts encrypt: 400, #pkts digest: 400
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 400, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0

local crypto endpt. : 62.aa.bb.cc, remote Start crypto. : 217.xx.yy.zz

Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: 39135054
current inbound SPI: B2E9E500

SAS of the esp on arrival:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4374000/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
outgoing esp sas:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac no compression
running parameters = {L2L, Tunnel, PFS 2 group}
slot: 0, id_conn: 100327424, crypto-map: VPN-OUTSIDE
calendar of his: service life remaining (KB/s) key: (4373976/1598)
Size IV: 8 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001

Output of the command: "sh crypto isakmp his."

HIS active: 4
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 4

IKE Peer: 217.xx.yy.zz
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVE

On the 1841

1841 crypto isakmp #sh its
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
217.86.154.120 62.153.156.163 QM_IDLE 1002 ACTIVE

1841 crypto ipsec #sh its

Interface: Dialer1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

local crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2

SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

outgoing ah sas:

outgoing CFP sas:

Interface: virtual Network1
Tag crypto map: SDM_CMAP_1, local addr 217.86.154.120

protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.20.2.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.37.0/255.255.255.0/0/0)
current_peer 62.153.156.163 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 585, #pkts decrypt: 585, #pkts check: 585
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors

local crypto endpt. : 217.86.154.120, remote Start crypto. : 62.153.156.163
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer1
current outbound SPI: 0xB2E9E500 (3001672960)
PFS (Y/N): Y, Diffie-Hellman group: group2

SAS of the esp on arrival:
SPI: 0 x 39135054 (957567060)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2003, flow_id: FPGA:3, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505068/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:
SPI: 0xB2E9E500 (3001672960)
transform: esp-3des esp-sha-hmac.
running parameters = {Tunnel}
Conn ID: 2004, flow_id: FPGA:4, sibling_flags 80000046, card crypto: SDM_CMAP_1
calendar of his: service life remaining (k/s) key: (4505118/1306)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE

outgoing ah sas:

outgoing CFP sas:

It seems that the routing on the 1841 is working properly as I can tear down the tunnel and relaunch in scathing a host on the network of 1841, but not vice versa.

Trounleshoot VPN of the 1841 report shows a message like "the following sources are forwarded through the interface card crypto. (172.20.2.0 1) go to "Configure-> routing" and correct the routing table.

I have not found an error on the 1841 config so if one of the guys reading this thread has an idea I appreciate highly suspicion!

It's the running of the 1841 configuration

!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
host name 1841
!
boot-start-marker
start the system flash c1841-adventerprisek9 - mz.151 - 1.T.bin
boot-end-marker
!
logging buffered 51200 notifications
!
AAA new-model
!
!
AAA authentication login default local
!
AAA - the id of the joint session
!
iomem 20 memory size
clock timezone PCTime 1
PCTime of summer time clock day March 30, 2003 02:00 October 26, 2003 03:00
dot11 syslog
IP source-route
!
No dhcp use connected vrf ip
!
IP cef
no ip bootp Server
IP domain name test
name of the IP-server 194.25.2.129
name of the IP-server 194.25.2.130
name of the IP-server 194.25.2.131
name of the IP-server 194.25.2.132
name of the IP-server 194.25.2.133
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
object-group network phone
VoIP phone description
Home 172.20.2.50
Home 172.20.2.51
!
redundancy
!
!
controller LAN 0/0/0
atm mode
Annex symmetrical shdsl DSL-mode B
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
isakmp encryption key * address 62.aa.bb.cc
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
map SDM_CMAP_1 1 ipsec-isakmp crypto
Description Tunnel to62.aa.bb.cc
the value of 62.aa.bb.cc peer
game of transformation-ESP-3DES-SHA
PFS group2 Set
match address 100
!
!
!
interface FastEthernet0/0
DMZ description $ FW_OUTSIDE$
10.10.10.254 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface FastEthernet0/1
Description $ETH - LAN$ $FW_INSIDE$
IP 172.20.2.254 255.255.255.0
IP access-group 100 to
IP nat inside
IP virtual-reassembly
IP tcp adjust-mss 1412
automatic duplex
automatic speed
!
ATM0/0/0 interface
no ip address
No atm ilmi-keepalive
!
point-to-point interface ATM0/0/0.1
PVC 1/32
PPPoE-client dial-pool-number 1
!
!
interface Dialer1
Description $FW_OUTSIDE$
the negotiated IP address
IP mtu 1452
NAT outside IP
IP virtual-reassembly
encapsulation ppp
Dialer pool 1
Dialer-Group 2
PPP authentication chap callin pap
PPP chap hostname xxxxxxx
PPP chap password 7 xxxxxxx8
PPP pap sent-name of user password xxxxxxx xxxxxxx 7
map SDM_CMAP_1 crypto
!
IP forward-Protocol ND
IP http server
local IP http authentication
IP http secure server
!
!
The dns server IP
IP nat inside source static tcp 10.10.10.1 808 interface Dialer1 80
IP nat inside source static tcp 10.10.10.1 25 25 Dialer1 interface
IP nat inside source overload map route SDM_RMAP_1 interface Dialer1
IP nat inside source overload map route SDM_RMAP_2 interface Dialer1
IP route 0.0.0.0 0.0.0.0 Dialer1 permanent
!
logging trap notifications
Note category of access list 1 = 2 CCP_ACL
access-list 1 permit 172.20.2.0 0.0.0.255
Note access-list category 2 CCP_ACL = 2
access-list 2 allow 10.10.10.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
Note access-list 100 IPSec rule
access-list 100 permit ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
Note CCP_ACL the access list 101 = 2 category
Note access-list 101 IPSec rule
access-list 101 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 101 permit ip 172.20.2.0 0.0.0.255 any
Note access-list 102 CCP_ACL category = 2
Note access-list 102 IPSec rule
access-list 102 deny ip 172.20.2.0 0.0.0.255 192.168.37.0 0.0.0.255
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
!

!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 101
!
allowed SDM_RMAP_2 1 route map
corresponds to the IP 102
!
!
control plan
!
!
Line con 0
line to 0
line vty 0 4
length 0
transport input telnet ssh
!
Scheduler allocate 20000 1000
NTP-Calendar Update
NTP 172.20.2.250 Server prefer
end

As I mentioned previously: suspicion is much appreciated!

Best regards

Joerg

Joerg,

ASA receives not all VPN packages because IOS does not send anything.

Try to send packets to the 1841 LAN to LAN of the ASA and see is the "sh cry ips its" on the 1841 increments the encrypted packets (there not)

The problem seems so on the side of the router.

I think that is a routing problem, but you only have one default gateway (no other channels on the router).

The ACL 100 is set to encrypt the traffic between the two subnets.

It seems that the ACL 101 is also bypassing NAT for VPN traffic.

Follow these steps:

Try running traffic of LAN router inside IP (source of ping 192.168.37.x 172.20.2.254) and see if the packages are not through the translation and obtaining encrypted.

I would also like to delete 100 ACL from the inside interface on the router because it is used for the VPN. You can create an another ACL to apply to the interface.

Federico.

Site to Site VPN license

Similar Questions

Maybe you are looking for