Problems with the restoration of a previous session

Similar Questions

• problems with the restore image on dreamweaver cs3

  I'm a GoLiver trying to learn Dreamweaver. I'm having a problem with the image of restoration on the bearing.  Here's the url

  http://www.allthegills.com/meadowcroftweb

  Not sure where I was wrong.

  Thanks for any help.

  The onmouse above and on the need to go in your href tag. You have them in your img tag. Should look like this

  

• [HELP] Problem with the restoration and recovery in the new host

  Hi, guys!
  
  I have tried for two days, but still can't make it work.
  I took a hot (online) full backup archive as well as the control file logs with the SPFILE and then copy the backup to the new host with the same directory structure and parameters. Finally, I tried to restore and recover the database on the new host, but failed during the restore process.
  
  The original host and the new host have the same subject Oracle installed until the patch level. I couldn't understand the solution to this problem based on my knowledge on Oracle DB.
  
  Could someone help me out here? Any advice would be appreciated!
  
  -----
  RMAN > restore the database up to the wire of the sequence 10 1;
  
  From restoration to November 8, 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01. DBF
  restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01. DBF
  restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01. DBF
  restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01. DBF
  restoring datafile 00005 to D:\ORA_DATADATA01. DBF
  restoring datafile 00006 to D:\ORA_DATA\DATA02. DBF
  restoring datafile 00007 to D:\ORA_DATA\INDX01. DBF
  restoring datafile 00008 to D:\ORA_DATA\INDX02. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BK
  P
  
  switch to the previous backup
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 11/08/2011 11:41:33
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  -----
  
  Here is some additional information you might want to know about:
  
  -----
  RMAN > list incarnation;
  
  
  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  1 1 PRODDB 3774691295 PARENT 1 17 APRIL 07
  2 2 3774691295 PRODDB PARENT 521803 6 OCTOBER 11
  3 3 3774691295 PRODDB PARENT 1595143 20 OCTOBER 11
  4 4 3774691295 PRODDB PARENT 1600974 20 OCTOBER 11
  5 5 3774691295 PRODDB PARENT 1952053 27 OCTOBER 11
  6 6 PRODDB 3774691295 CURRENT 2146951 7 NOVEMBER 11
  
  RMAN > backup recoverable list;
  
  
  List of backup sets
  ===================
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  37 full 822,34 M DISK 00:29:47 7 November 11
  BP key: 37 status: AVAILABLE Tablet: NO Tag: TAG20111107T175037
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BKP
  List of files to backup data value 37
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  2149673 full 1 7 November 11 D:\DBDATA\PRODDB\SYSTEM01. DBF
  2 full 2149673 D:\DBDATA\PRODDB\UNDOTBS01 7 November 11. DBF
  3 full 2149673 D:\DBDATA\PRODDB\SYSAUX01 7 November 11. DBF
  4 integer 2149673 D:\DBDATA\PRODDB\USERS01 7 November 11. DBF
  5 integer 2149673 D:\ORA_DATA\DATA01 7 November 11. DBF
  full 2149673 D:\ORA_DATA\DATA02 6 7 November 11. DBF
  7 full 2149673 D:\ORA_DATA\INDX01 7 November 11. DBF
  8 whole 2149673 D:\ORA_DATA\INDX02 7 November 11. DBF
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  38 full 6.95 M DISK 00:00:03 7 November 11
  BP key: 38 status: AVAILABLE Tablet: NO Tag: TAG20111107T182034
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_07\O1_MF_S_766606834_7CH8Q439_. BKP
  Control file included: cash SNA: 2151141 cash time: 7 November 11
  SPFILE included: Modification Date: 7 November 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  18,46 39 M DISK 00:00:05 8 NOVEMBER 11
  BP key: 39 status: AVAILABLE Tablet: NO Tag: TAG20111108T093359
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_. BKP
  
  List of newspapers archived on backup value 39
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 1 2146951 7 NOVEMBER 11 2149493 NOVEMBER 7, 11
  1 2 2149493 7 NOVEMBER 11 2149519 NOVEMBER 7, 11
  1 3 2149519 7 NOVEMBER 11 2149565 NOVEMBER 7, 11
  1 4 2149565 7 NOVEMBER 11 2149641 NOVEMBER 7, 11
  1 5 2149641 7 NOVEMBER 11 2172859 NOVEMBER 7, 11
  1 6 2172859 7 NOVEMBER 11 2197851 NOVEMBER 7, 11
  1 7 2197851 7 NOVEMBER 11 2220349 NOVEMBER 8, 11
  1 8 2220349 8 NOVEMBER 11 2222621 NOVEMBER 8, 11
  1 9 2222621 8 NOVEMBER 11 2222729 NOVEMBER 8, 11
  1-10 2222729 8 NOVEMBER 11 2223088 NOVEMBER 8, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  40 full 6.95 M DISK 00:00:00 November 8, 11
  BP key: 40 status: AVAILABLE Tablet: NO Tag: TAG20111108T093411
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_08\O1_MF_S_766661651_7CJY84LK_. BKP
  Control file included: cash SNA: 2223097 cash time: November 8, 11
  SPFILE included: Modification Date: 8 November 11
  -----
  
  Thanks in advance!
  
  Jay

  In short, the RCS of the controlfile will be generally higher than corresponding SCN of the data in the event of hot backup (online) file; However, the two SNA will be the same in the case of cold (off-line) backup. Am I entitled?

  Yes, it's true. In a backup cold (assuming that the CLOSURE was not a SURRENDER but was NORMAL, TRANSACTIONAL, or IMMEDIATE) all files in the database (data files, redo log and controlfiles files) are 'compatible' - at the same point in time, to the same SCN. In a hot backup, the files are updated. RMAN is not necessarily take all the data files at the same time - for example when you have several data files, RMAN would backup the files in batches of 4 or 8 - data files are therefore controlled at different points in time. Similarly, the controlfile is saved last.

  Hemant K Collette

• Problem with the restoration of the database

  Hello world

  I have a strange problem while restoring the database with rman. The problem is that the data are not restored at all.

  Let me show you what I do step by step:

  1. create the test table:

  $ sqlplus / as sysdba

  SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 22:51:58 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > create table test (ID);

  Table created.

  SQL > insert into values test (1);

  1 line of creation.

  SQL > commit;

  Validation complete.

  2. backup the current database:

  rman target $ /.

  Recovery Manager: release 11.2.0.1.0 - Production Fri Apr 17 22:56:44 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: ORACLE (DBID = 1672007929)

  RMAN > backup database;

  From 17 April 14 backup
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 6 type of device = DISK
  channel ORA_DISK_1: starting full datafile from backup set
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  Enter a number of file datafile = 00001 name=/u01/app/oracle/oradata/oracle/system01.dbf
  Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/sysaux01.dbf 00002
  Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/undotbs01.dbf 00003
  Enter a number of file datafile = 00005 name=/u01/app/oracle/oradata/oracle/example01.dbf
  Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/users01.dbf 00004
  channel ORA_DISK_1: from room 1 to 17 April 14
  channel ORA_DISK_1: finished piece 1 to 17 April 14
  piece handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp tag = TAG20140417T230734 comment = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:57
  channel ORA_DISK_1: starting full datafile from backup set
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  including the current control in the backup set file
  including current SPFILE in the backup set
  channel ORA_DISK_1: from room 1 to 17 April 14
  channel ORA_DISK_1: finished piece 1 to 17 April 14
  piece handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_ncsnf_TAG20140417T230734_9o1jc09s_.bkp tag = TAG20140417T230734 comment = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:01
  Backup finished on 17 April 14

  3. change the data in the test table

  $ sqlplus / as sysdba

  SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:10:16 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select * from test;

  ID
  ----------
  1

  SQL > update test set ID = 2;

  1 line update.

  SQL > commit;

  Validation complete.

  4. restore the database

  RMAN target /.

  Recovery Manager: release 11.2.0.1.0 - Production Fri Apr 17 23:11:15 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: ORACLE (DBID = 1672007929)

  RMAN > shutdown immediate;

  using the control file of the target instead of recovery catalog database

  database closed

  dismounted database

  Instance Oracle to close

  RMAN > bootable media.

  connected to the database target (not started)

  Oracle instance started

  mounted database

  Total System Global Area 835104768 bytes

  Bytes of size 2217952 fixed

  629147680 variable size bytes

  197132288 of database buffers bytes

  Redo buffers 6606848 bytes

  RMAN > restore database;

  From restoration to April 17, 14

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 156 type device = DISK

  channel ORA_DISK_1: from the restore backup set data file

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_DISK_1: restore datafile 00001 to /u01/app/oracle/oradata/oracle/system01.dbf

  channel ORA_DISK_1: restore datafile 00002 to /u01/app/oracle/oradata/oracle/sysaux01.dbf

  channel ORA_DISK_1: restore datafile 00003 to /u01/app/oracle/oradata/oracle/undotbs01.dbf

  channel ORA_DISK_1: restore datafile 00004 in /u01/app/oracle/oradata/oracle/users01.dbf

  channel ORA_DISK_1: restore datafile 00005 to /u01/app/oracle/oradata/oracle/example01.dbf

  channel ORA_DISK_1: backup /u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp piece reading

  channel ORA_DISK_1: room handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp tag = TAG20140417T230734

  channel ORA_DISK_1: restored the backup part 1

  channel ORA_DISK_1: restore complete, duration: 00:00:55

  Restoration finished in 17 April 14

  RMAN > restore database;

  To go back to April 17, 14

  using channel ORA_DISK_1

  starting media recovery

  media recovery complete, duration: 00:00:03

  Finished recover at April 17, 14

  RMAN > sql 'alter database open;

  SQL statement: alter database open

  5. check if the data has been restored

  sqlplus / as sysdba

  SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:14:39 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select * from test;

  ID
  ----------
  2

  Summary:

  Data has not changed. Provided the ID is 1, but after the success of data recovery is not restored (ID is always 2).

  Can someone help me? What I am doing wrong?

  Database is Oracle 11 g with archivelog active

  Ol6 2.6.39 Linux OS - 300.17.2.el6uek.x86_64

  RMAN > restore database;

  To go back to April 17, 14

  using channel ORA_DISK_1

  starting media recovery

  media recovery complete, duration: 00:00:03

  Finished recover at April 17, 14

  RMAN > sql 'alter database open;

  SQL statement: alter database open

  5. check if the data has been restored

  sqlplus / as sysdba

  SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:14:39 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select * from test;

  ID
  ----------
  2

  Summary:

  Data has not changed. Provided the ID is 1, but after the success of data recovery is not restored (ID is always 2).

  Can someone help me? What I am doing wrong?

  Database is Oracle 11 g with archivelog active

  the recovery was successful, but achieved your goal.

  There are several options to reach your goal to recover your database to a particular State that is point in time.

  1 restore the file of control as noted above. you restore the control file must not be aware of the generated once archivelog that you update your table. IE backup controlfile prior you updatedyour table.

  2. do not apply archivelog all during recovery. You can use SNA, SEQUENCE, RESTORE POINT option of the recover command. This option requires that you open your database with resetlog.

  read: scene of Flashback and the database Point-in - time recovery

  After a restore successful your database (before the recover command), you can "alter database open read-only" to check and confirm the values in the table.

  HTH

  Tobi

• RH9 WebHelp problem with the buttons next and previous topic

  The previous topic and next topic buttons do not work as expected. By example, if I navigate to topics and click on the previous topic, I expect to see the most recent section I read (similar to the use of the back button in a browser to see the previous page). However, the previous button is not available or the user to a random topic and next topic never brings up the next topic.

  I inherited this project, my first experience with RH9 and so am not sure something previous author included in the project to check the buttons appear or if these buttons are part of the interface default WebHelp. I looked in properties available to single Source for each output, but do not see any place to specify information on these buttons.

  As you can see in the screenshot, is not on the sequences of travel (I saw that there are other questions about Next and Previous as sequences associated to browse).

  Any help appreciated because this bug was found by QA and they would like to solve the problem in the next update...

  Carol

  Hello

  These buttons above the table of contents are buttons for the navigation sequence. And that might explain their behavior.

  Do you mean any other key? Am I missing something?

  Take a bow

  Willam

• Problem with the restoration of the system

  Hello

  I can't restore my system to an earlier time. When I try to restore, the computer stops and seems to go through steps, he needs to in order to restore but when starting, even once, it displays a message saying "system could not be restored (date/time). Please select another restore point. "The problem is that even if you select another restore point, is the same thing. I ran my anti-virus program and no viruses are detected. Any ideas?

  Hello

  Maybe the created restore point has been corrupted or the option has been disabled.
  I studied in the net and found the FAQ from Microsoft document on the Restore tool in Windows XP.
  http://www.Microsoft.com/technet/community/newsgroups/faqsrwxp.mspx

  Maybe it will help you.

• Problems with the restore points very limited available in the system restore

  I found that I can't go further than 3 days on the system restore points. I have noticed for some time and it causing problems. I can't go back to the previous month. Can someone tell me why?

  YES-open SR-glance left to SR parameters - click sur-put slider for max.

  min he won't give you a few days.

• Problem with the HP G62 recovery disks

  Hello

  I'm having a problem with the restoration of the operating system on your laptop HP G-62. When I first bought the laptop, I was unable to make the recovery discs, so I ordered recently a few new HP. Because I have installed Ubuntu on the laptop, I wiped it from the disk hard drive used Wipedrive to remove the old Ubuntu operating system I had installed.

  Laptop computer reads the first disc ok and installs the component of windows, but when the screen lights up asking the two disc number it freezes and never installs anything when you try to move anything that used to screen it doesn't matter what and he used to install the second disk. He repeats just 'Please wait '.

  Thank you, Robert

  Hi, Robert:

  I can't help you get the recovery disks to work, but if you can read all 25 characters of the product key 7 windows on the bottom of your PC, you can do your own installation disc 7 windows to reinstall the operating system.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• What is the problem with the tool crop of Photoshop CS6? (photo included)

  Since I upgraded to Photoshop CS6 and started to use the new crop tool, I get this very interesting visual error and some artifacts.

  I have the problem with the crop tool in previous versions of Photoshop.

  What can be the problem?

  

  Looks like a GPU problem. You can try to go in Photoshop preferences, disable the GPU acceleration and try if that fix it?

• You try to run the system on my desktop restore encounters a problem with the program looping.

  Original title: System Restore loops

  Hi, I am trying to run restoring the system on my desk is a problem with the program in a loop.  He directs the system restore and then comes back just to start the system again Restore page.  How to solve this?  I started having problems when I have updated the BIOS on my motherboard.  When I installed the motherboard at the start, I think I used the incorrect installation disc (my son has same brand motherboard but the sound is more advanced).

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• My homepage with the restore session was crushed. What is the address of the start page?

  Ask.com has replaced my home page. I need the address so I can bring it back to the home page of firefox with the restore session button. I tried to reinstall firefox, but that has not worked.

  Alternatively, you can try to reset the browser.startup.homepage_override.mstone pref on the topic: config page.

  • http://KB.mozillazine.org/about:config

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  

  This is a double post of a following:

  Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

• Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Hi judithl34724699,

  If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf

  Also try to use a different file type.

  Thank you

  Abhishek

• I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

  I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

  uninstall any version of acrobat is installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer.

  delete all to delete pdf files.

  If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.