Situation of the VM - use suggested default or rather not?

Similar Questions

• Reverse the order use current default values

  Hello

  I was working with a labview program tonight and had used the command 'Reset all default' in the menu use to clear all waveforms on my screen.  However, I accidentally chose the command "Make default current values" and can't erase what appears in the waveforms.  I'm sure there is a simple solution to my problem, but I could not understand.  I tried rewiring parts of my diagram didn't exclude graphs of waveform with the hope that the waveforms would leave but realized that the graphics were not wired so nothing would change.  Any help would be appreciated.

  Thank you

  bsteinma

  Unless you also saved, simply close the VI. If you want to save the VI, then just delete the graphics/charts by right-clicking and selecting data operations > clear chart.

• HP Envy 15-j139TX: the BIOS using external storage recovery does not work.

  My HP Envy 15-j139TX got stuck (frozen) and I force closure by long pressing the power button. I tried to start by pressing the power button, it shows a black screen (display off) and the capslock continues to Flash.

  I did research on the problem and discovered that the issue was "the BIOS corruption failure" according to the information on the link below:

  http://support.HP.com/us-en/document/c01732674/

  I tried to recover the BIOS using an external storage device by following the instructions at the link below:

  http://support.HP.com/us-en/document/c02693833

  But it did not work. The lights keep flashing. I have my files b.SC. thesis on the computer and their need for pronto. (If not my life is pretty well made)

  I also couldn't find the files for version 10 of Windows (64-bit) to my laptop, so I tried with one I downloaded from another site and I got a BIOS of Windows 8.1 HP site.

  Is there anyway I can fix it soon or get my files as soon as possible. Help, please!

  Have you ever updated the BIOS before?

  If you have, you should be able to recover the BIOS using the Windows key + key B method.

  All holding the key Windows + B button down, press the power button and wait to see if the laptop responds with a message of recovery of the BIOS on screen.

  As my wife continued his mastery, I insisted on his recording of his files periodically to our home network NAS.

  You can remove the hard drive and connect it to a desktop computer to get the files from it. You can connect the hard drive to a USB to sata cable to connect it to a laptop.   Instructions to access the disk by opening the back door are on page 42 of the maintenance and service guide. The hard drive is part replaceable by the user, so you don't have to worry about voiding the warranty.

  http://h10032.www1.HP.com/CTG/manual/c03943414

  Your notebook is new enough to have the recovery key enter BIOS update available. Use the F.65 version in the Windows 8.1 driver download section. the softpaq is at the following ADDRESS.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69886.exe

  You will need at least 256 MB usb key to create a USB rcovery to recover the BIOS with. BIOS update softpaq will offer the opportunity of creating a recovery USB. I used the method on multiple occasions and it worked for me.

• I can't get Firefox to load my comcast e-mail. I can browse the web using firefox, but it does not load my emails. How can I fix it?

  I have a Mac, and I use Firefox for years. Recently, I started having problems loading my emails from Comcast when I use Firefox. I am able to load my mail using yahoo and safari... but not on Firefox. Can I do to solve this problem? I tried to reset firefox several times... at first, it seemed to solve the problem, and then after the first 5 minutes, it was back to my emails does not. So I uninstalled firefox and reinstalled... but no luck in fixing the problem. Any ideas?

  try to clear your cache and cookies to see if that solves the problem. Incase it doesn't work, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.

  Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete the other files of cookie present as cookies.sqlite - journal in the Firefox profile folder where the cookies.sqlite file has been corrupted.

  Start Firefox in Mode safe to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

• How to only show the tiffs grid by default? And not RAW + TIFF.

  Hi guys,.

  I have 2 questions:

  (a) I now have 2 images - a tiff file and a RAW file, so I have twice the number of images showing on my grid, and I would like the default only see tiff and be able to revisit the RAW format when I have to.

  (b) I would also like to convert all my imported files, 5,000 of them to Aperture, to DNG files.

  How to proceed?

  Thank you very much

  Raphael

  (B) you will have to export in the export dialog, select DNG as file extension.

  Or you can locate these files on your disk and use the free Adobe DNG converter program to convert to DNG and then in LR import those converted files.

  But then, in both cases, you would have 2 sets of the same images. Original RAW and DNG RAW

• When I hit a link to a page in my directory in code view and I click on the link using live view, it does not to this page.  But if I saw in a browser, it works very well.

  When I hit a link to a page in my directory in code view and I click on the link in live mode view, it does nothing.  When I then go to preview in a browser, it works fine.  Can anyone help?

  To follow links in Live View mode, hold down the CTRL on Windows or the command key on a Mac key, and then click the link. Clicking on without using the Ctrl/Cmd key simply selects the link in Live View mode.

• When I opened a new web page, it loads in the previously used tab, why?

  When I opened a new web page, it loads in the previously used tab. It did not used to do this.

  I do a search on google for example, when I opened what I'm looking for, the previous tab disappears and is REPLACED by the following, it is not how I try to go to another destination, Firefox uses the current tab... bloody annoying!

• in the life situation, is the flash recovery area used often?

  Hi all
  
  in the life situation, is the flash recovery area used often? or being extinguished?
  
  What is general practice?
  
  Thank you
  
  Andrew

  Andrew,

  First that you must answer - what you want to with flash recovery area (FRA). FRA may or may not be used with another technology - flashback database.

  (i) are you using a base of data of flashback (database +, not table or query flashback flashback), i.e. you have lit the flame of the database? If so, you need to use CRF because that's where the FB connect to go.

  (ii) If you don't use flashback database, you can, but you don't need to use FRA. FRA can be used for database backups and archived logs archived backups of logs.

  I strongly suggest not to use FRA for archived logs. As a corollary, I strongly suggest backups seprating and newspapers archived on separate file systems (and underlying disks), if possible. Don't forget, you can always re-create a lost backup using logs archived. but never an archived newspaper lost. If you have lost journal #345, but all the others to have #346-#1000, it doesn't matter; recovery stops at 345. So imagine put backups and newspapers archived on a single point of failure - you lost two of them.

  Therefore, I use different locations for backups and archived logs, somewhat defeat the purpose of the FRA, where both are supposed to go.

  Caveat: I do this for all important databases. If a database is not so important, well...

  I hope this helps.

  Arup

• Firefox OSX 10.7.5 25.0.1 forces the use of default input source, why?

  Hello

  I have not noticed this in previous versions of Firefox, but OSX 10.7.5 25.0.1 version requires the use of the input source by default (e.g. my laptop, instead of the external keyboard connected keyboard).

  All other input devices are grayed out in the language & entry drop-down toolbar when the Firefox application is in short. This does not happen with any other application on my desktop.

  I think that's the question relates to this subject also:

  https://support.Mozilla.org/en-us/questions/977966?ESAB=a & As = AAQ

  See you soon,.

  Sunkai.

  Well, it's a broader issue to do with the question of whether the keyboard drivers that are installed are compatible with 32-bit and 64-bit applications.

  Firefox starts in mode 64-bit OSX by default, and if your keyboard drivers are 32-bit only, then this input source is not usable and is grayed out.

  Discussion of this for the British provisions can be found here:

  http://www.Gyford.com/Phil/writing/2005/11/20/using_a_british.php#c285152

  the British 64 - bit drivers layout can come from here:

  http://Liyang.Hu/OSX-British.XHTML

  If you have problems with your own keyboard, with a provision of another country, you will need to find drivers 64-bit for this layout.

• Back up photos and videos on the SD card by default using XA Ultra

  How can I save photos and videos on the SD card by default using XA Ultra?

  Help, please... Thank you

  Go to the camera, tap the small gear, hit more, scroll down and find the storage of data. If you have a microSD card inserted, you will have the ability to change.

• What is the best browser to use by default?

  Original title: best default browser use

  default browser

  A browser is a program that allows you to surf the Internet, such as Windows Internet Explorer , Mozilla Firefox or Google Chrome .  If a computer has more than one browser, you must designate one of them as the default browser (preferred).  One you use the most is a good choice. Boulder computer Maven
  Most Microsoft Valuable Professional

• When I try to insert key it says its the key by default and can not be used. Sticker on the bottom of my laptop is all cleared off the coast.

  I recently installed Linux, now I have installed Windows 7 Hp 36 bit now when I try to insert my key it says its the key by default and can not be used. To make it better. My sticker on the bottom of my laptop is all set off but I Got the serial number and product and model. What should I do?

  I did install the ISO wrong or my key has expired?

  You can't just use any key, the product key for your computer is unique. If the product key on the COA sticker at the bottom of your laptop is damaged, you will need to purchase a new product key for Windows 7 Edition Home Premium and use:

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• Hi, I am not able to execute the procedure using dblink in PLSql block. Although he works outside the end of the beginning. Please suggest solution

  Hello

  I'm not able to execute the procedure using dblink in PLSql block.

  Although he works outside the end of the beginning.

  Please suggest solution

  Hello

  Thanks everone for your contributions,

  As well as the permissions, I used to run inside the PL sql block, which was not necessary, we can simply call the procedure using dblink.

  Thanks guys,.

• When I open a pdf file using adobe default to 139% magnification. How to change the system, so it defaults to the actual size

  When I open a pdf file using adobe default to 139% magnification. How to change the system, so it defaults to the actual size

  Hi christian-laup70425339 .

  Please try this step: -.

  Acrobat > edit > Preferences > Page Display > under Default Layout & Zoom, set "Zoom in" on the value of your choice that you want.

  I would like to know if it works.

  Kind regards

  Christian

• Can we use Office default memory offline if the customer does not have enough free memory?

  Can we use Office default memory offline if the customer does not have enough free memory?

  Yes. We can use the parameter offlineDesktopDefaultMemoryScaleupValue jointly with the offlineDesktopReportedHostMemoryValue parameter in the registry.

  For example, if your client system has 2 GB of memory and the desktop view is configured to require 2 GB of memory, you won't be able to check the desktop view because low memory is also necessary for visualization of hosted customer.

  Use the parameter DesktopReportedHostMemoryValue = 2048 registry offline, so that you can go to the desktop and use the registry parameter offlineDesktopDefaultMemoryScaleupValue = 1024.

  so that the desktop view uses only 1 GB of memory when run locally.

  Reg patch: HKCU\Software\VMware, Inc. \VMware VDM\Client\disableOfflineDesktopMemoryScaleup

  Note: If it's a small environment you can do manual. Or we can simplify this activity by creating a group policy.