Size does matter

Similar Questions

• Close the button for the rollover Sidelet: size does matter?

  Hi all
  
  I build a slide that incorporates a rollover sidelet. Since the public of my tutorial includes some older users, I want to assure you that everything is easy to see.
  
  My question is this: can the 'Close' button that appears in the upper right of the sidelet be expanded? Currently, the sidelet is set to 'stick' for a long period of time: I would like users who want to ignore its contents to close easily and then continue the tutorial.
  
  Thanks for the help!
  
  AM

  Welcome to our community, AM

  Unfortunately we have no control over the size of the button. You should probably make a request to the development team to consider adding this in the future.

  Click here to view the WishForm/Bug report form

  See you soon... Rick

• OfficeJet Pro 8600 Premium error paper size does not match

  I try to print an envelope #10 that I printed several times in the past, but today I get the error that the detected paper size does not match.  I print on MS Word with the selected for the #10 envelope paper size.  I loaded the envelope properly.  Why is he not feel today when it was fine yesterday?

  Hello

  The application, go to Printer preferences. What size and type of paper is selected here?

  You have restarted your computer since yesterday?

  Thank you

• "Canvas size" does not remember last setting used

  I noticed that "Canvas size" does not save the last settings used more in Photoshop CC 15.5. It is located in centimetres every time.

  The "Image size" option screen keeps the last used settings.

  This used to work properly in Photoshop 14 CC.

  Canvas size always comes back to the unit which is defined in Edition > Preferences > units & rulers.

  

  "Image size" in the upper part of the window always the size in pixels and under the print format, but never shows in pixels.

  If your preferences setting is "mm", the print size will be shown in mm.

  If your preferences setting is "pixel", the print size will be shown in cm or mm or inches, but not in pixel.

  Fenja

• Odd paper size does not print on B8550

  Hi all

  I have seen this issue before, but the answers don't seem to work for me, so let's try again:

  I'm on a Power PC Mac dual G5, OS 10.5.8, connected to a Photosmart B8550 via USB. I'm in Photoshop CS4, I'm trying to print on a paper 12 x 15 for which I have a paper size custom, implemented and registered. I try to print to the paper size, and I get a message that says: paper size or type does not match the paper size and type in the in tray.

  The really weird thing is, it worked a few minutes ago, and I do exactly the same thing now. Any ideas would be most appreciated.

  Thank you

  Peg

  No, thanks to HP, I found the solution. The paper type must be HP Advanced Photo paper, and I can print what I want, to any size I want, no matter what program I want.

  Hey, HP, do you think you could indicate this to your support the so-called people?

• Image adjustment and canvas size does not

  Hello world

  I'm trying to save an action on an open image. I first choose the command "Mount Image" and enter a size of 1580 x 2000 pixels (do not expand). I then choose the size of the canvas and try and enter the dimensions in pixels of 1580 x 2000 pixels but although I input these numbers, when I view the details of this step of action of canvas, he always says height: 2000 pixels, Vertical: Center, but it does not the width of 1580.

  It seems that for some reason any program won't allow me to enter the same dimensions in pixels in two separate measures, consecutive. I remember successfully made this a few weeks ago, but I don't know why it doesn't work now.

  I was wondering if someone could help me out and let me know what I could do wrong?

  Thanks in advance.

  I have never see that happen if you change the two dimensions of the canvas. can you show a screenshot if registered in the palette step actions. Here what I get... If you want to save the step size of canvas after made stage image to save on both sides, you need to change both one side will be 2000 or 1580.  So, you need fix this first. stop recording changes the size of the canvas to 1581 x 2001. Then start of new record replaces canvas size to1580x2000.

  

  When you record steps if you do not change a default option offered Photoshop will not record anything for this option and Photoshop uses its default value.  It's very important when you want things like the name of the current document to use other options as the current path to use. If you change only the saved value will always be used.   Here you want you still want the canvas image size to be extended to the full 1580 x 2000 therefore with other reports l / h of images will focus on a canvas of 1580 x 2000.

  Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
  Contains

  • Action Actions Palette Tips.txt
  • Action creating Guidelines.txt
  • Action dealing with Image Size.txt
  • Strengthened through scripts functions.txt Photoshop action
  • CraftedActions.atn sample Action set includes an example of Watermarking action
  • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
  • More then a dozen Scripts for actions

  Example of
  Download

• the cursor size does not exceed 200

  I'm doing a burning and dodging in photoshop CC, but when I use the [&] to change the size of the cursor, it will not not exceeding 200 pixels in size.  In fact, it continues to grow, but the Visual of the cursor remains at the 200 pixel size I tried to change the cursor preference but the same thing regardless of what I have chosen.  The same problem exists for the brush with the stamp tool.

  I've updated my 10.9.5 OSX and the problem is now resolved.

• Custom paper sizes does not save

  Hello world

  Our IT Department has just installed Acrobat X Pro on our PC and I downloaded the instructions to print custom paper sizes, but they do not save. I go to printers and faxes, right click on the pdf printer, click Add on the settings of PDF tab, add the name, dimensions etc... click Edit/save... and nada. When I go to print it isn't here. What I am doing wrong. I know that it's going to be something really simple and I am being a numpty.

  It's so much easier on a mac. Laughing out loud

  Try right-clicking on the PDF printer

  Run as administrator > properties

• Final print size does not match the view screen.

  Hello

  I have problems to make my final prints to match the screen display.  Recently, I had this problem: I have an image which is of size at 5 X 7.  I have it on a 5 X 7 model in the Lightroom print module.  The dimensions of the image in Lightroom say 5 X 7.  I have printing on 5 X 7 paper (I actually measured it to be sure).  ON the screen, they look perfect, corresponds to the templates and measure fime with leaders at the screen.  Without fail, a part of the print is cut on final printing.  Along side printing is the most affected.  It is not only limited to 5 X 7, it happens in all areas.  Is this a common problem or I'm I have something wrong?  In the 5 X 7 example above the impression comes from 5.2 X 7.3 give or take.  I use Lightroom 5.3 on an iMac running OS 10.9.1.  The printer is a Canon Pro 100.

  I look forward to help with this.

  Thank you

  Joe

  If the problem is that the printed image is proportional to the largest, it is a very common side effect with the mode parameters borderless print drivers. In general, (although sometimes you can avoid this where alternative options without borders are given)-edition special unrequested % scale ensures that any physical wrong registration or the inaccuracy of the size of the paper, does not allow accidental white edges.

  It's nothing to do with the end of LR in the process, as appropriate.

• Automatic paper size does not recognize the legal papers

  I'm unable to use the sutomatic scan legal size paper size it scan only as letter size, cut the rest of the image.

  I use a fi-6230Z with Twin drivers. When assign legal it ignores the analysis the letter and legal in the legal size.

  I use Windows 7 and Acrobat Pro XI 11.0.3

  Acrobat uses the setting of the scanner when the paper size is set to "auto". This does not mean that Acrobat is the size of the paper you are scanning. So if your scanner setting is set to "Letter" paper size is set to "Auto", Acrobat will get the size letter only.

  Thank you

  Bad Boy

• Preview brush size does not match brushstroke

  The size of the brush preview does not match brushstroke. I insert a picture of the problem. I tried allmost everythning, but nothing works.

  Does anyone have a solution for this problem?

  * I use a wacom tablet.

  

  What is your size of the system slider set to something other than normal?

  under the Apple system, universal access preferences.

  

• Virtual machine file size does not decrease after moving files

  My Windows XP virtual machine file was about 25 GB after I migrated from a Windows PC on a Mac. So this morning I moved on the 12 GB of files of the virtual machine is the My Documents folder to the my Mac Documents folder.  However, the file size of the Virtual Machine does not decrease at all.  What ' s past? Is there a utility that I have to run to compress the file or something? Why the files of the Virtual Machine has not declined the amount of files moved to the Mac OS environment?

  JCC321 wrote:

  Thanks for the tips. I ran the cleaning disc as well as remove snapshots, but it only reduced the size of the file by about 1 to 2 GB. Much less than the 13 and 14 GB that was moved. Other ideas on where is hiding that extra GB of 11-12?

  You did copy or move, and if copied then you can remove and empty the trash?  Did you use Disk Cleanup to do some house-keeping file and empty all but the last restore Point before you shrink the disc?  Another way to check that is placed on a Windows system is to look at the drive with WinDirStat.  For the side Mac, check out GrandPerspective.

  Post edited by: WoodyZ

  I see that you have changed your answer so I answered it while I have quoted the original post, that I was responding to because you deleted what you posted.

• Exported size does not match the size of my work plan?

  Using CS5.5,.

  I created title screens that must be carried into a screen recording program. I create a new document RGB, 72 dpi and 1680px X 1050px. I create my text and graphics and every time that I export as one. TIFF, it looks to export to a different size? I have them open in Photoshop and checked the size of the image and it is not the size, that I put the document up. Looks like that it exports only the part of the artboard that displays, content, because a lot of my work plan is empty. I just tried export as one. PNG with the same results.

  What I am doing wrong?

  Thank you.

  See "Use of work plans" in the export dialog box

• the font size does not... * & ^ % $

  Hi all

  I don't know what is happening but my code does not change the size of my text.

  I have a toggle button that works fine on everything except the size of the text.

  I have a dynamic text field called myText text and here is the code I use.

  function maisLegendaF(e:MouseEvent):void {}

  var formatT:TextFormat = new TextFormat();

  {if(!e.currentTarget.Toggle)}

  myButton.gotoAndStop (2);

  formatT.size = 19;

  myText.setTextFormat (formatT);

  }

  else {}

  myButton.gotoAndStop (1);

  formatT.size = 12;

  myText.setTextFormat (formatT);

  }

  e.currentTarget.toggle =! e.currentTarget.toggle;

  }

  Can someone help me out here? PLS?

  Thanks in advance!

  I don't know what I'm trying on different files and nothing works... I solved it by using scale on the text box!

  Thank you very much!!

• Exchange 2007 SP3 increase in message size does not work why?

  I have a windows server 2008R2 with Exchange 2007 SP3, currently the maximum to send and receive message size is 30 MB. My MD needs to send an email which is 60 MB.

  I went through and changed all the parameters in which I expect to do. If I run best practices, it signals that the Send connectors and the receiver are high at 60 MB. Fine, I said.

  I open Microsoft Outlook 2007 and try to attach several files to 5 MB per element. Outlook has that attachments are great when I get to 29 MB.

  This is only a temporary job, so not worried, but can, my concern is what's wrong.

  We had Exchange 2007 running on windows 2008R2 who say it cannot be done while we had a server crash. I had to transfer exchange on a temp server. I've migrated on the main server which is brand new but this time, I installed Excahnge 2007SP3. I don't know if this migration has nothing to do with it.

  Any help would be great

  Concerning

  Garv :)

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/