Size imported graphics

Similar Questions

• Wrong width for the imported graphics to frame 9

  Anyone else had problems with Framemaker detecting the wrong width when you import graphics?  For example, when I import a jpg of a button which must be 21 x 21 pixels, Framemaker displays the 24 PX width and height than 21px.  This translates into a broken graph.  If I adjust the dimensions of the chart in FrameMaker for the right size, then print the PDF, the right border of the image is disabled.

  I tried to capture the graph a variety of different ways, and I still feel the same results.  I can import the graphic into Captivate or Word and the sizing is correct.  Any ideas?  Thank you!

  I use FrameMaker version 9.0p237 as part of the Technical Communication Suite 2.

  I just tested this with a sample file dimensions 21 x 21, and you are perfectly right. FM9 live upwards the size (and default dpi resolution) for PNG and GIF files. I also tried BMP and TIF equivalents and they were ok. FM8 does not have this problem, it seems that Adobe has played with filters PNG and GIF a little (maybe to get rid of all the extra colors coming).

  For an import JPG or PNG to a 21 x 21 to 96 DPI, FM9 seems to think it is 24 x 21-110dpi. FM8 is good.

  For a GIF of the same import, FM9 think it's 22 x 21-75dpi. FM8 had right.

  Also, what is strange, is that if the dimensions are both even, for example 20 x 20 to 96 DPI, then FM9 gets it right of JPG, PNG and GIF. However, if the * first * dimension is odd, for example 21 x 20 it he gets hurt again as before, but if the second dimesion is odd, for example 20 x 21, it just gets it. VERY STRANGE!

  This is certainly a BUG.

  I suggest that you should use BMP or TIF for now OR try increasing your 1-pixel icons to make them the same size, for example 22 x 22.

  I also recommend that you do not use JPG for the latter, but the GIF or PNG, because you can produce unwanted artifacts in the JPG because of used lossy compression.

  

• Import graphics in Keynote

  I'm creating a presentation for a customer in Keynote.

  They have a very specific color palette, I've used throughout the document.

  I created elements in the document that I applied the color palette in without incident.

  Everything is good so far.

  Unfortunately, every time I import the graphic into the document, the colors (of imported graphics) are everywhere.

  I'm generating content in Adobe Illustrator and Adobe Photoshop, both using RGB color spaces.

  I did some research and I understand that it's something to do with the monitor profile and that all imported in Keynote is converted.

  I've updated the profiles selected within each program in Adobe RGB (1998) profile in the display panel, but it does not seem to make a difference.

  Has anyone encountered this problem themselves?

  I'm doing something wrong?

  Any advice would be much appreciated.

  With Keynote, use generic RGB in System Preferences > monitors > color

  If the graphics are created specifically for the speech, imaging requests can also be set to generic RGB.

  Generic RGB is the color profile used in the screen and video from Apple applications, which includes the Keynote.

  Adobe RGB is designed for photographic images that will be printed on paper.

• How can I change the color of an imported graphic?

  I have been using Motion under and turned off for a while now and have never figured out how to change the color of an imported graphic. Can I change font colors but what on a jpeg logo imported. I need to just change the color of the face of the logo. I have no idea. Any advise will be greatly appreciated.

  See you soon.

  Tom

  diff options...

  I prefer stills in an application 'paint' designated, like Pixelmator preparation...

  but the movement has filters/Color Correctiontools, look at:

  

  Colorize exchange all black (or white) in a color of your choice

  logos n & b non...

  

  Hue/Saturation to change colors...

  ... you can even animate/keyframe such seals...

  hope that helps!

• I choose resolution when importing graphics?

  Can I choose resolution when importing graphics, just like the graphics import into Framemaker

  

  N °

• How to remove invisible reference to the imported graphic?

  I recently moved a book in a new folder, now when I open my accompanying document, framework asks for the location of an imported graphic, that it does not. As far as I know, I deleted this graph imported for a long time. I don't see a paragraph mark for this on the page the list of references gives for this. It is not visible on the body or template pages. No gray rectangle anywhere.

  How can I find and delete this invisible reference?

  When I click on ignore the missing graphic box, he asked again the next time I open the document. When I open the document in Notepad, I see the name of the chart he needs. Can I just remove this name using Notepad? (Suspect who would be too good to be true).

  Thanks for any help on yet another problem of Frame not covered in the documentation.

  John, I think if I were you I would recreate the terms of coverage. It shouldn't take too long-

  • Create a new file of FM.
  • Save the new file as "coverNew.fm" (or other)
  • With only these two files open on the FM band and the new file as the 'active' file, make file > import > Formats. Don't forget that the ' import to ' at the top of the dialog box specifies the old file. Import all formats. Save the new file.
  • If you have a text on the old file, click the cursor anywhere in the text and do Ctl + a to select all the text in the stream.
  • In the new file, click the cursor in the empty text frame and do Ctl + v to paste. Save the new file.
  • For the new graphic, draw a graphic image on the page where you want to be placed.
  • In the old file, select the chart by clicking on it - don't forget to click just above, don't do Ctl + a or you might get inadvertently old graphics too. Do Ctrl + c to copy.
  • In the new file, select the empty graphic block, you just create and do Ctl + v to paste. Save the new file.
  • Then, when you have your new file with all the transferred content, close the old file. Make file save as to name the new file the same name as the old file.

  Let us know how you go.

• Automatic integration of imported graphics

  Is it possible to configure InDesign to automatically incorporate imported graphics?

  It seems that if I want to do, I must integrate everything manually through the context menu of the links palette.

  PageMaker prefer a setting allowing graphs imported to auto-intégrer, but InDesign seems to lack this feature.

  I know that some people will wonder why on earth I would want to do and quickly will offer several reasons on why linking is the best practice. But not all workflows are the same. Mine is better suited to have everything integrated because I have are mainly about the business card layouts. Because these files are usually very few large, it makes no sense to have the logos in a separate file somewhere.

  In fact I am using graphics incorporated into my PageMaker files for ten years with no problems it either - until InDesign came it is!

  While I fully understand the value of binding - it just is not sensible in my situation.  I almost feel as if InDesign developers are forcing their ideas of workflow on me! Give back me my automatic incorporation, please!

  Rant side-someone ' can one suggest a work around?  I thought maybe script could save the day, but I have not found a way to do that, yet.

  There is not enough for me to write a script that does exactly what you need. I don't know if you want to incorporate all links, or only certain types of links, etc.

  But here's my first attempt.

  1. Create this folder "Adobe InDesign CS3\Scripts\Startup Scripts"
  2. Place the script inside.
  3. Restart InDesign

  Delete: delete the script and restart InDesign

  Kasyan

• Import graphics Illustrator in the right size

  Hello

  Anyone who is familiar with the import of Illustrator graphs at the right size?

  East - the right approach? In InDesign, my Options of text block told me that my block of text is 35p7.276. My graphic Illustrator must therefore the two 35p7.276 high and wide. Then I put the character of my graphic style to reflect those of my InDesign document and now, she's ready for the import?

  Thank you!

  You mean like the refresh from scratch?

  No, I don't have the figures for the chart. Most of the time I start with something that has been stuck in a Word from Excel file. If I can get the numbers, then it is usually easier to just remake the chart in Illustrator using graphical tool Illustrator. But without the numbers I usually end up copying and pasting from Word to Illustrator and then manipulate (drawing a) graphic of what I want to (change the fonts, character, STROKE, color, size etc. and then resize it to final print size and then resize the type even once).

  I don't know what you mean by "dealing with the actual graphics in Indesign. InDesign is not a graphical tool. Similarly, I don't know what you mean by vectorize. Create outlines is a way to convert the type of vector art. A graph is already (or should be) vector art (with a small cast type).

  Ken

• get NET imported graphics

  I have problems bitmap graphics from Photoshop to import dryly in Flash. I use the highest quality PNG codec, but graphics appear jaggy, once they are in Flash.

  Can someone share tips for crisp graphics in Flash?

  My train for sizes is 992 x 692 or smaller, and I go to 100%, so not waiting not graphics to be sharp and clean to the maximum magnification...

  Thanks for any help!

  flashkatt

  As Ned, you can adapt it in flash with very good results. It will be not as sharp to make the graphics to be perfectly sized for flash, but it will be either Pixelize.

  What you can do is drag the image on your stage and then (F8) convert to symbol. If you change the properties of the symbol, you will see a smoothing check box.

• Imported graphics ppt location. changed

  I imported a powerpoint slide with a size of 16:9 for a simulation project which has a resolution of 1024 x 768.

  According to the captivate, the quality of the slides will found during publication.

  

  I have published the project as a swf and html 5.  I started the project using the extension index.html BOF published record. The result is that objects in the ppt moved. Like the image below.

  

  But if I run the project using the extension .htm, powerpoint slides seems fine. Everything is in place

  The index.html file launches the HTML version. There are a few differences with the output SWF (launched by the .htm file). It was not a good idea from the beginning, to use another resolution for the project cptx (4:3) as for the PPT (16:9). Is there any reason to do so?

• Importing video alpha channel: what to export for Adobe Premiere? Reduced file size Important.

  I want to import a small 20 second animation at 1920 x 1080, RGB + alpha superimposed, all less than 5 MB of After Effects in Adobe Premiere. What are my options? Used to be my go-to the file format FLV files. An example FLV pose this requirement would be around 700 KB.

  Export in. MOV with Alpha as a result of this same file 700KB to 950MB (difference of size of files after x 1350).

  Export in. AVI with Alpha translates this same file 700KB to 9800 MB (a x 14000 times difference in file size).

  Export in lossless with Alpha translates this same file 700KB to 1100 MB (difference of size of files after x 1500).

  I surrender all the little animations of 10-30 per project and make them all integrated into Adobe Premiere, so a dynamic link is not practical. This was a nice project of ~ 15MB will now have to be (at least) a project of ~ 20GB. This is not sustainable.

  Any help appreciated, thanks.

  My choice would be Cineform.

  The files will be not small, but it is an unreasonable expectation here, I think.  The size of the intermediaries is not usually something that worry, not only the expected results.

• Imported graphics appears on my content

  Hello

  I have a huge textfield extending all across my page. Earlier I tried to import this graphic Illustrator in it, but it manifests itself on my content as oppose to above or below. I tried a paste up well, but that has not worked. Any ideas how I might solve this problem?

  Thank you!

  OK, I see the problem.

  You have defined a fixed attack for the text. Your graph is considered as just another character and is inserted with its lower edge on the baseline. If you used automatic spacing key maturities adjust for this line and the following text should be pushed down.

  A way to deal with this would be to apply the dressing to the chart, then select it and drag it down on the line. If you have a large number of them, you can make a style of object for them.

  Peter

• Internal error - writing of imported graphics

  We packed the Framemaker document and the last time we used it was in 2007.
  Now, we are on a new version of the software and need to update the manual in Framemaker.
  When I open my saved framemaker documents I get an internal error occurred during writing of graphics imported into this document.  Report this error to Adobe Technical Support.
  I can't make changes or save my Framemaker documents.
  Anyone know what I can do to get rid of this error?
  The FrameLog is attached.
  Adobe FrameMaker 7.0
  I pasted into the graphics and links to the PowerPoint presentation.
  Windows XP service pack 3
  Thank you!

  It is a well known for more than a year... Since shipped SP3 problem. It contains a security fix that broke the import OLE mechanism, which is what you use to import a slide as an object.

  You have two options to solve the problem - update to FM 9; 9 uses a different mechanism to import OLE that seems to work well. (Given the inherant OLE desquamation.)

  Or convert your graphic slides by saving outside of TPP or doing screen clings and then import in the doc of FM as graphics referenced.

  TO

• To scale an imported graphic (framework and content at the same time)

  I read the help files, the knowledge base, even watched instructional videos but can ' t find a way to scale a placed graphic. I understand the difference between a frame and the content. I can put the scale either by using the mouse or digital controls. But to measure these things, what I owe to scale each seseparately?

  For example, I want the picture size to 2.0 inches wide. I don't see a way to do this in a single operation.

  I see that you CAN do in %. Select the image of the object and if you the size to 50%, it works - framework and content go to half size. But if I size dimension (width = 1.5 "), I have the frame, then the content.

  Is there a way to act on the structure and content at the same time?

  It is InDesign CS3 on Mac.

  It is not really intuitive. Select the image, and then look in the control panel for the horizontal and vertical scale fields, which should all two say 100% when you first select an object. The unit of measure in these areas by default is %, but as any of the numeric fields of ID, you can use any unit you want, as long as tell InDesign what units you are using. If you want to 2.0 ", enter 2.0i (you need not nitrogen) in the width field and press ENTER. Your frame and content will scale to 2 ".

• Fall of 6.7 LR in modest size import

  Hi - I recently made several improvements to my system and now problems with import.   Lightroom works fine to visualize and develop photographs, but breaks down at halfway during the import. He left a bunch of temporary folders, but do not import the photos. Can you help me?

  End 2009 27 "iMac

  Lightroom 4.X (from 2012)

  ~ 500 GB library of ~ 50 000 photos/videos

  Attempt to import 694 files including pictures and video of the iPhone #1 PNG.

  List of upgrades

  July 16, added 2 x brand 2 GB Crucial Ram in the previously empty slots (8 GB total): import works.

  July 16, left internal library for WD MyBook 4 to HDD 7200 RPM disk external DRIVE connected via USB 2.0: import works.

  August 16, upgraded to 1 Tb internal SSD: import works.

  22 sep 16, elCapitan OSX update to osSierra 10.12: has not been imported before the next change, do not know if the import worked.

  24 sep 16, Moved library of WD MyBook 4TB to Sony 1 TB 5400 RPM external HARD drive connected via FireWire 800: import fails.

  29 sep 16, improved Lr 4.X to 6.0 Lr (lightroom catalog updated too): the import fails.

  30 sep 16, set to update from Lr to Lr 6.7 6.0: import failed

  Troubleshooting of the tests in the current state

  Import from another smart phone, iPhone #2, including PNG 164, video, photo files: fails

  Import using the different light cable to connect iPhone #1: fails.

  Internal SSD import: fails

  DIsconeect all external drives, import to the internal SSD flash drive: import fails

  Import into WD MyBook 4 to 7200 RPM disk external DRIVE connected via USB 2.0: fail

  Deleted preferences file: import fails.

  Import a single iPhone photo #1 to internal SSD (no external drives): import works

  Import a single photo of the iPhone #2 for the SSD internal (not external drives) : import works

  Import a single photo of the iPhone #1 WD MyBook external (unrelated Sony): import works

  Import a single iPhone photo #1 to external Sony (WD MyBook is connected): import works

  460 import PNG photo, video of the iPhone #1 to the external Sony (WD MyBook is connected): import failed

  apparently a few photos imported, because the new photo count is down *.

  Import 324 #1 to the WD MyBook iPhone photo/PNG/video (Sony is connected): import fails
  

  Import 324 photo/PNG/video iPhone #1 to the internal SSD flash drive (WD MyBook and Sony are connected): import failed

  It seems that Lr will fail when the imported quantity becomes too large. What should I do next?

  I've updated to Sierra 10.12.1 today (October 24) and import has started working again.  I managed to import 369 files (over 1 GB) of photos/videos/PNG from iPhone to Sony 1 TB 5400 RPM external HARD connected via FireWire 800 drive.

  Solution: Sierra 10.12.1 works.  Sierra 10.12 did not work.