Size of the data in ASM file

Similar Questions

• How to add the data in asm file

  Hello
  
  
  Can someone let me know how to add the data using ASM file
  
  DB-ORACLE 10.2
  OS RHEL

  create tablespace tbl_name
  DATAFILE '+ DATA' SIZE 1 G REUSE
  autoextend on next maxsize of 250 M 2 G;

  where is your asm disk group + DATA

• error message about the size of the data store

  I installed ESXi 5.1.0 on VMware workstation and interfaced the vsphere client management interface. It's all about

  Windows 7 laptop. I am now installing a VMware vCenter Server device image by using the vsphere client. But I have

  get an error stating: the capacity of the drive specified is greater than the amount available on the data store. Click Cancel to

  back from the value of disk space? How is it determined? I tried to change the size of the data store

  but I still get the same error. I do it just with what I have at home, and I'm new to VMware technology.

  I found this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003565

  And it seems to imply that the size of the block can be a problem. Block size for the data of my ESXi store is set to 1 MB, which is expected to support upward

  up to 256 GB. I can't imagine that I need more space.

  On a different note, would you please tell me how I can post a couple of groups? What is the policy on this?

  I took a glance at the file unit .ovf and given the size of the virtual disk that is required for the data disk rose from 60 GB to 100 GB with update 1.

  It can work to tweak/change the .ovf file, however, in this case I would simply create a larger store of data to meet the requirements for the virtual disks (25 + 100 GB + overhead).

  André

• Shrinks data and small to read. How doI to increase the size of the data?

  I need increase the size of the data on the website

  See also:

  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Please tell me how do to permanently change the date of a file "update"

  Please tell me how do to permanently change the date of a file "update". The file is a JPG image copied from a digital camera. After that I rotate image his 'Date Modified' goes from January 20, 2011 to September 1, 2011. As a result of the date change, the image no longer appears in the correct position when the directory is sorted. I have a program that creates a file HTML images. The software sorts images according to their creation date. The bad images appear at the end of the table.

  Date manipulation attributes of a file can be done directly through the graphical interface of Windows.  There are, however, various third party utilities that have this capability.

  This article has a good discussion on the topic and includes links to some public services.  The article is quite old, however, and I don't check to see if the links are still valid.  If not, you should be able to find something useful here: http://www.google.com/#sclient=psy&hl=en&source=hp&q=edit+file+accessed+date&pbx=1&oq=edit+file+accessed+date&aq=f&aqi=&aql=&gs_sm=e&gs_upl=1857l7979l0l8482l23l23l0l2l2l0l267l4165l0.10.11l21l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649

• Size (size of the incompatible displayed ico file) Windows icons

  Size (size of the incompatible displayed ico file) Windows icons.

  After resizesing my medium to large desktop icons I see several icons are not become larger. Unlike most of my icons, he remained the same size, but instead, they were in the Center and a greyframe. As a result, he started the project of change all the icons in some new. ICO files which would give them the great nice to register in the other size. After that my work was done, I had a nice full Office of the great pretty icons, all of the same size and none inside a gray frame. I reboot (restart) my computer and saw, to my horror, this (see photo) all of a sudden a random amount of icons has chosen to go back to being small and sit inside a gray frame. I don't see any explanation as to what size of icons changed.

  I try to change the display settings for size (control Panel\All Control Panel Items\Display) in 125% and 150%. Both times it switches around which the icons are large and small. so apparently no model at all. I restart again and find 2 icons went big and 4 other small. It's an amazing incompatible and it amazes me why windows this. Why can't keep windows icons (ICO) files to their proper size? (all my ico files support all sizes, as far as I know, and they have developed scale perfectly up down before the 1. Restart)

  It's incredibly frustrating. MY question is. Can I just to force Windows to use the maximum size, or somehow it resolved so that windows will scale icons up and down properly?

  Hi Benjamin,

  Please contact Microsoft Community.

  Just a few questions first, to get a clear picture of the issue;

  1. What is the size of ICO file? Is - this (256 x 256)?

  In Windows 7, App icons and Control Panel items must be in the .ico file format and all should includes following sizes of icons.

  • 16 x 16.
  • 32 x 32.
  • 48 x 48.
  • 256 x 256.

  According to the guidelines of the screenshot, there is a difference in size ofcon I have, I suggest you to download the package of icon for the application you want to change the icons according to the dimensions mentioned above.

  Note: Display in Windows 7 allows you to make text and other items large, such as icons, on the screen you, while keeping your display to its optimal resolution.

  We answer with the result, then we can help you further.

• How to integrate the dynamic SQL generated in the data definition XML file?

  Hi all

  I have it here is the XML file that is attached to the definition of data model RTF as below. Also, I have a function that will return to create a dynamic query as shown below.

  <?xml version="1.0" encoding="UTF-8"?> 
  <dataTemplate name="XYZ" description="iExpenses Report" Version="1.0"> 
  <dataQuery> 
  <sqlStatement name="Q2"> 
  <![CDATA[
  

  Hi guys,.

  I was able to solve above the requirement. It was not possible to create only from SQL dynamically. Instead, I created a procedure that would create & update (attached to the data definition) XML file dynamically for each race.

  Kind regards

  Patricia K.

• Webutil: I can get the DATE of a file on the server has been created/modified

  I need to extract the date of a file on the server has been created or changed-for example, the date that will be displayed as a result of "ls * .fmb" on Unix.
  
  Anyone know of any Webutil function or procedure that can return this information?
  
  Thank you

  You can use HOST and put the rsultminto a text file, and then read that you use TEXT_IO, as

  HOST('ksh ls -ltr file.fmb > /tmp/file.txt');
  

• Size of the data in a table and the size of the table

  I am trying to determine the size of the data in a table and also the overall table size. I use the following query:
  
  SELECT BOTTOM (a.owner) as owner,
  LOWER (a.table_name) AS table_name,
  a.tablespace_name,
  a.Num_Rows,
  ROUND ((a.blocks * 8 / 1024)) AS size_mb,
  a.Blocks,
  a.Blocks * 8 Blocks_Kilo_Byte.
  a.PCT_FREE,
  a.compression,
  a.Logging,
  b.bytes / 1024 / 1024
  From all_tables a, dba_segments b
  WHERE the a.owner AS SUPERIOR ("USER_TEST")
  AND a.table_name = "X_TEST_TABLE."
  AND b.segment_name = a.table_name
  AND b.owner = a.owner
  ORDER BY 1, 2;
  
  Is this the right way to go about finding the size of the data in a table? If this isn't the case, please give your suggestions.
  
  BTW, this in a 10g version.

  You probably want to use the DBMS_SPACE package. In particular, the procedures SPACE_USAGE and UNUSED_SPACE to get an accurate account of the use of space in a table. Your application may give you a relatively accurate estimate if the optimizer on your table's statistics are reasonably accurate estimates. But there is no guarantee that the optimizer statistics are accurate.

  If you want just an approximate answer and you're comfortable that your statistics are accurate, this query may be close enough. If you want a specific response, however, use the DBMS_SPACE package.

  Justin

• Purge of the records of the Table and the size of the data file

  11.2.0.4/Oracle Linux 6.4

  We want to reduce the size of the DB (file size of data), so that our RMAN backup size will be reduced. So, let's create stored procedures that will purge old data in huge tables.

  After you remove records, we will decrease the tables using the:

  change the movement line of table ITEM_MASTER enable;

  change the waterfall table retractable ITEM_MASTER space;

  ALTER table ITEM_MASTER deallocate unused;

  The commands above will reduce the file size of data (see dba_Data_files.bytes) or it will reduce the size of the segment?

  Only the segment formats will be reduced.  Oracle has never reduced the sizes of data file automatically.  You would have to reduce them.  You may not be able to reduce the size of data file if there are extensions to the 'end' (highwatermark) data files.  In this case, you will need to create a new tablespace and move all the objects for the new tablespace OR export, drop, create tablespace and import.

  Hemant K Collette

• Is there a maximum size or the limit of text file during storage and data transfer?

  HI -.

  We used WriteExtFile and AppendExtFile to store data in a CSV text file in a data folder in the same location as the executable files of Authorware.

  WriteExtFile ("data\\"^"Variable_Names.txt", Survey_Variable_Names)

  AppendExtFile ("data\\Survey_DATA.txt", Survey_Data)

  As a general rule, we always put our executable files on the hard disk of the computer (c) due to some issues we had with an incompatible network drive in the past.  Have the files on the C: drive, eliminated any network problem.  Our data has accumulated would be always stored on the C: drive as well.

  Now, we need to store a backup copy of the data on a server, on the C: drive.

  My question is: is there is a maximum file size that can be "read in" and then "written" using Authorware?

  My thought was to use ReadExtFile to read the content of the 'Survey_DATA.txt' file and use WriteExtFile to write these same data on a drive on the network, by adding the date and time at the end of the name of the file as a backup file.

  I used this logic, which is working to write on the "P": network drive

  WriteExtFile ("P:\\Survey_Project\\BackupData\\DATA_BACKUP_"^Backup_Date^"_"^Backup_Time^".txt", Survey_Backup_Data)

  Of course, the size of the original text on the C: drive file will continue to grow because "AppendExtFile" is used to add the data of every investigation file in the data file (CSV, each record on its own line).  If the size of the file we will read again (ReadExtFile) will also continue to grow.

  Is there a limit to what we can read in and then write back?

  Thank you!

  Scott

  My apologies, it has been a few years...

  CopyFile is a function that you can load the WinAPI.u32

  Once loaded, use it like this

  Success: = CopyFile (FileLocation ^ "Sourcefile.txt",)

  Destination ^ "DestinationFilename.txt") "

  Remember that you must include WinAPI.u32 with your packed files.

  Steve

• Size of the data file

  Hello
  
  If I allocated 1 GB to a tablespace, but common usage is 500 MB. And if I had to copy this tablespace to another location, what will be the size in the transfer? 500 MB or 1 GB?
  
  If I summarized the size in v$ datafile, this will give me the total size of all the data file?
  
  Thank you.
  

• Command SQL PLUS to display the size of the data file

  How can I know my tables disk space after insertion of data
  
  Thank you

  Hello

  Did you do the space occupied by the tables in the database.
  If Yes

  select sum(bytes)/1024/1024, segment_name from dba_segments group by segment_name
  or
  select sum(bytes)/1024/1024 from dba_segments where segment_name = 'Table_name'
  

  Or have you served the space occupied by the data files

  select bytes/1024/1024, file_name from dba_data_files;
  

  Concerning
  Anurag

• Maximum size of the data to tiara

  Hello

  I'm trying to load a 2 GB text file in DIAdem. This causes DIAdem hang and I have to restart the software. Can it supports this size? If Yes, then what is an approximate loading time?

  My system config is:

  Windows XP OS

  1 GB OF RAM

  3 GHz P4 processor

  Thank you

  Yoann

  Hello Brad,

  Thank you very much for the code. It works very well. Please don't worry about the issue of column of the time that I have had filled all of LV test data and had not included the values of millisecond for her. On the data set real, the code works fine.

  Kind regards

  Yoann

• How to display data on the screen and save the data in a file at the same time?

  The code can display acceleration on the screen of the playbook.

  But, when fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ") runs, debug displays no source available.

  ??

  Does anyone know how to solve the problem, which writes data to a file?

  The code is below.

  /*
  * Copyright (c) 2011 Research In Motion Limited.
  *
  Licensed under the Apache License, Version 2.0 (the "license");
  * You may not use this file except in compliance with the license.
  * You can get a copy of the license at
  *
  www.Apache.org/licenses/license-2.0
  *
  * Unless required by the applicable law or agreement written, software
  * distributed under the license is distributed on an "AS IS" BASIS.
  * WITHOUT WARRANTIES OR CONDITIONS of ANY KIND, express or implied.
  * See the license for the specific language governing permissions and
  * limitations under the license.
  */

  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include

  /**
  The milliseconds between the accelerometer readings. It's the same thing
  * rate in which the accelerometer data will be updated
  * material. The update of material rate is below to help
  * accelerometer_set_update_frequency (FREQ_40_HZ).
  */
  public static const int ACCELEROMETER_MAX_POLL_INTERVAL = 25;

  public static screen_context_t screen_ctx;
  public static screen_window_t screen_win;
  dialog_instance_t main_dialog = 0;

  paused int = 0;

  The forces of the accelerometer
  float force_x, force_y, force_z;

  file elements
  int _logcounter = 0;
  FullName Char [256];
  FILE * f;

  /**
  * Use the PID to set the id of Group window.
  */
  public static char
  get_window_group_id()
  {
  public static char s_window_group_id [16] = "";
  If (s_window_group_id [0] == '\0') {}
  snprintf (s_window_group_id, sizeof (s_window_group_id), "%d", getpid());
  }
  Return s_window_group_id;
  }

  /**
  * Set up a basic screen, so that the browser will be
  * Send window state events when the State of the window changes.
  *
  * @return @c EXIT_SUCCESS or EXIT_FAILURE @c
  */
  public static int
  setup_screen()
  {
  If (screen_create_context (& screen_ctx, SCREEN_APPLICATION_CONTEXT)! = 0) {}
  Return EXIT_FAILURE;
  }
  If (screen_create_window (& screen_win, screen_ctx)! = 0) {}
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }
  use of int = SCREEN_USAGE_NATIVE;
  If (screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_USAGE, & use)! = 0) goto fail;
  If (screen_create_window_buffers (screen_win, 1)! = 0) goto fail;
  If (screen_create_window_group (screen_win, get_window_group_id())! = 0) goto fail;
  buff screen_buffer_t;
  If (screen_get_window_property_pv (screen_win, SCREEN_PROPERTY_RENDER_BUFFERS, (void *) & buff)! = 0) goto fail;
  buffer_size int [2];
  If (screen_get_buffer_property_iv (buff, SCREEN_PROPERTY_BUFFER_SIZE, buffer_size)! = 0) goto fail;
  int attributes [1] = {SCREEN_BLIT_END};
  If (screen_fill (screen_ctx, chamois, attributes)! = 0) goto fail;
  int dirty_rects [4] = {0, 0, buffer_size [0], buffer_size [1]};
  If (screen_post_window (screen_win, buff, 1, (const int *) dirty_rects, 0)! = 0) goto fail;
  Return EXIT_SUCCESS;
  in case of failure:
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }

  /**
  * Rotates the screen at the specified angle.
  *
  @param angle angle to rotate the screen.  Must be 0, 90, 180 or 270.
  *
  * @return @c EXIT_SUCCESS on success, to another @c EXIT_FAILURE
  */
  public static int
  rotate_screen (int angle)
  {
  If ((angle! = 0) & (angle! = 90) & (angle! = 180) & (angle! = 270)) {}
  fprintf (stderr, "Invalid Angle\n");
  Return EXIT_FAILURE;
  }
  int rc;
  int rotation;
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, & rotation);
  If (rc! = 0) {}
  fprintf (stderr, "error getting the window of the screen rotation: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int size [2];
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error getting size memory buffer window screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int temp;
  switch (angle - rotation) {}
  case - 270:
  case - 90:
  decision 90:
  case 270:
  Temp = size [0];
  size [0] = size [1];
  size [1] = temp;
  break;
  by default:
  break;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, &angle);)
  If (rc! = 0) {}
  fprintf (stderr, "screen rotation window for parameter error: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window buffer size of the screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  Return EXIT_SUCCESS;
  }

  /**
  To manage an event of navigator.
  *
  * @return @c the value true if the application should shut down, another fake.
  */
  public static bool
  handle_navigator_event(bps_event_t *Event)
  {
  bool should_exit = false;
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_EXIT:
  should_exit = true;
  break;
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true);
  break;
  case NAVIGATOR_ORIENTATION:
  {
  int angle = navigator_event_get_orientation_angle (event);
  If (rotate_screen (angle) == EXIT_FAILURE) {}
  should_exit = true;
  }
  navigator_done_orientation (Event);
  break;
  }
  }
  Return should_exit;
  }
  /**
  * Display an alert dialog box that contains the location data.
  */
  public static void
  show_main_dialog()
  {
  If {(main_dialog)
  return;
  }
  dialog_create_alert(&main_dialog);
  dialog_set_alert_message_text (main_dialog, "Acceleration to first fix");
  dialog_set_size (main_dialog, DIALOG_SIZE_FULL);
  dialog_set_group_id (main_dialog, get_window_group_id());
  dialog_set_cancel_required (main_dialog, true);
  dialog_show (main_dialog);
  }

  /**
  * Displays geolocation data in the main dialog box.
  */
  public static void
  display_acceleration_data (float force_x, float force_y, float force_z) {}
  char buf [1024];
  snprintf (buf, sizeof buf,
  "\tX: m\n % 7.3.f.
  "\tY: m\n % 7.3.f.
  "\tZ: m\n % 7.3.f."
  force_x, force_y, force_z);
  dialog_set_alert_message_text (main_dialog, buf);
  dialog_update (main_dialog);
  }

  void createafile() {}
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  {if(f==null)}
  file does not exist
  f = fopen (fullname, "r");
  {while(f!=null)}
  file exists
  fclose (f);
  ++ _logcounter;
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  f = fopen (fullname, "r");
  }
  }
  }

  write data to the file
  void writedataintofile() {}
  f = fopen (fullname, "w");
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  fclose (f);
  }

  /**
  * A sample application shows the native APIs of BlackBerry for accelerometer.
  * The example initializes and reads the accelerometer periodically until one
  * NAVIGATOR_EXIT event is received.
  Enforcement also tuned to changes status window in the browser so that
  * It can stop reading the accelerometer when the application is no longer visible.
  */
  int main (int argc, char * argv {})
  bool exit_application = false;
  /*
  * Until we can listen for events from the BlackBerry Tablet OS platform
  * services, we need to initialize the BPS infrastructure
  */
  bps_initialize();
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event). This allows to
  * us to clean up resources in the application.
  */
  navigator_request_events (0);
  dialog_request_events (0);
  /*
  * Initialize the screen so that the Windows Id is correctly set, to allow
  * dialogs to display.
  */
  If (setup_screen()! = EXIT_SUCCESS) {}
  fprintf (stderr, "Failed to initialize the screen.");
  Exit (-1);
  }
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  *
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event).
  *
  * We ask events of dialogue so that we can be notified when the service of dialogue
  * answers to our queries/requests.
  */
  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "error asking navigator events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  If (BPS_SUCCESS! = dialog_request_events (0)) {}
  fprintf (stderr, "error asking dialog events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  /*
  * Create and display the dialog box that displays the data from the accelerometer.
  */
  show_main_dialog();
  /*
  Prior to initialize the accelerometer function, we must ensure the unit
  * takes in charge
  */
  If (sensor_is_supported (SENSOR_TYPE_ACCELEROMETER)) {}
  /*
  * If the device does not support the accelerometer so warn the user,.
  * clean in and out
  */
  public static const int SENSOR_RATE = 40;
  sensor_set_rate (SENSOR_TYPE_ACCELEROMETER, SENSOR_RATE);
  sensor_request_events (SENSOR_TYPE_ACCELEROMETER);

  }
  /*
  * Initialize the accelerometer setting the rate at which the
  * accelerometer values will be updated material
  */
  accelerometer_set_update_frequency (FREQ_40_HZ);

  /*
  Treat browser events and take the accelerometer readings periodically
  * until we receive a NAVIGATOR_EXIT event.
  */
  createafile();
  f = fopen (fullname, "w");

  While (! exit_application) {}
  /*
  * By setting the timeout to bps_get_event to ACCELEROMETER_MAX_POLL_INTERVAL,
  * We assign the maximum duration (in millis) who will wait before
  * release so that we can take a reading of the accelerometer.
  */
  bps_event_t * event = NULL;
  bps_get_event (& event, ACCELEROMETER_MAX_POLL_INTERVAL);

  If {(event)
  If (bps_event_get_domain (event) is {sensor_get_domain()})
  /*
  * We woke up. See if we are in the paused state. If not,
  take a reading of the accelerometer
  */
  If (! pause) {}
  sensor_event_get_xyz (event, & force_x, & force_y, & force_z);
  display_acceleration_data (force_x, force_y, force_z);
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  } //paused
  }
  / * If this is an event of the dialog box, determine the response code and handle
  * the event accordingly.
  */
  {ElseIf (bps_event_get_domain (event) == dialog_get_domain() {)}
  ;
  }
  /*
  * If it's a NAVIGATOR_EXIT event and then set the exit_application
  * indicator so that the application stops processing events, clean and
  * output.
  */
  {ElseIf (bps_event_get_domain (event) == navigator_get_domain() {)}
  exit_application = handle_navigator_event (event);
  }
  } //if event
  } //while
  /*
  * Destroy the dialog box, if it exists.
  */
  If {(main_dialog)
  dialog_destroy (main_dialog);
  }

  fclose (f);

  /*
  * Clean the infrastructure bps and output
  */
  sensor_stop_events (SENSOR_TYPE_ACCELEROMETER);
  bps_shutdown();
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  return 0;
  } //main

  Hello

  As I said on your other thread:

  In order to write in the shared directory/documents, your application should request action "access_shared" and it must be granted by the user. Make sure you have

  access_shared

  in your bar - descriptor.xml.

  Also note that the shared documents folder may not be the best place to write the application log data. There is one connects / in the sandbox to this effect, or the application directory data / directory if the information should be persisted. The documents/shared/folder is designed for documents that the user creates or interacts with.

  HTH,

  Christian