error message about the size of the data store

Similar Questions

• pixel shader - get an error message about the 2.0 pixel shader

  Why do I get an error message about the 2.0 pixel shader and how can I solve this problem

  This indicates that your video card is not capable of using pixel shader 2.0 technology.
  Check that your video card is compatible with the minimum requirements of the game or software you use.

• Tecra A10 - fake error messages and the date of

  Hello, Toshiba Tecra A10, PTSB0A-002001 under XP pro,

  I get the wrong date & error messages on my cell phone when I get out my laptop for long periods off without charge, so I guess that the Cmos battery is not good, so I ask: what is the cmos battery number and where can I get one?

  Thank you

  Hi joe75,.

  Before you exchange the CMOS battery: leave the AC adapter plugged in for at least 24 hours. During this procedure the CMOS battery recharges and the laptop should be able to store the correct date & settings repeatedly.

  Check this box!

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error message about the folder drafts ("mailbox does not exist")

  Hi, after having added a third account to my office of Thunderbird, I receive the Error Message after 30 seconds or more:
  "the current operation on the drafts did not. "the e-mail server for account [email protected] replied: there is no mailbox.
  Can anyone help solve this? Sending and receiving mail seem to work perfectly.
  Thank you very much
  Eli

  The current path to store such projects as configured in Thunderbird may not correspond to your IMAP server folders.

  Check first if you subscribe or if the folder exists on the server, then check if it is correctly configured in your account settings, as shown in the attached two screenshots.

• I get an error message about the virtual device Drivers__as said in the body - section add details below.

  SYSTEM\CurrentControlSet\Control\VirtualDeviceDrivers. VDD. format of pilot of virtual device in the registry is invalid. Choose 'Close' to terminate the application.

  You try to run an old MS-DOS program in Vista?

  "16-bit programs are not supported on 64 bit versions of Windows Vista or Windows 7."

  Some 16-bit DOS programs and the command prompt does not work in mode full screen in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/926657

  If it is not something like the above, you may have to get clarification on what you try to do when you see this error message.

  http://www.Google.com.au/search?q=virtual+device+driver+format+in+the+registry+is+invalid&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = yCCMS_bsGoze7APkzKSzDQ

  How to troubleshoot a program that does not run as expected once it is installed on Windows Vista
  http://support.Microsoft.com/kb/931362/en-us

  Make older programs in this version of Windows
  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Windows Vista Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/details.aspx

• To remove the error message about the network drive

  I have W7 Home and recently restructured.   I had this problem of reformatting finally a long time ago and it is solved but do not remember how.  Whenever I boot, I get the message "connection impossible network drives.  When I click it, I see the Epson printer has a red X on it and says Epson memory card.  The printer has always shown in my computer, but it works very well.  All I need is to get rid of the error message.  I tried to go into the center of the Action and unclicking on error messages of network firewall but that did not help. I'll print on any solution this time for the next restructuring!  Thanks for any advice.

  Epson support says that since the printer connecting wireless much later that opens Windows, Windows is not see when it starts.  They say that it is a Windows problem, not them.

  To get rid of the error message, I disconnect a right-click on my computer and clicked on the network drive.  I find the error message disappeared and the printer works fine.  I don't know if there's a problem with that.

• Photoshop CC - Error Message about the graphics card

  Hi, I am a user of cloud creative and recently downloaded the new CC in Photoshop. I tried to open an existing file and got the following error message

  "3D features require a minimum of 512 MB of vRAM. Photoshop has detected less than on your system. Update your graphics card driver may solve the problem. »

  While I am fairly proficient in Photoshop, I have to admit that I am a bit lost when it comes to my computer. Can someone help me understand if I really need a new graphics card or maybe my settings are wrong?

  Here is some information on my computer:

  Mac Pro

  Processor 2 x 2.8 GHz Quad - Core Intel Xeon

  Memory 20 GB 667 MHz DDR2 FB-DIMM

  Graphics  ATI Radeon HD 2600 XT 256 MB

  Software  Mac OS X Lion 10.7.5 (11G63b)

  I thank in advance for any advice/help, you can offer.

  According to the technical specifications of Photoshop CC you require 512 MB of vRAM installed graphics driver.

  Tech specification Photoshop CC:

  http://www.Adobe.com/in/products/Photoshop/tech-specs.html

  Graphics ATI Radeon HD 2600 XT 256 MB

  The card installed on the computer have only 256 MB of vRAM.

  Photshop gives you hereby warning to solve.

• I get an error message about the Core.dll

  When I try to open a file, I get a fatal error message.  Acrobat failed to load the DLL base.  What can I do to fix this?

  http://helpx.Adobe.com/Acrobat/KB/reader-core-dll-error.html

• When you uninstall a previous version of the player, I get an error message about the paths of transformation

  I tried to uninstall the version 8.1.2, and I get an error message to check that specified transform paths are valid. Some body please help. I could use the 90 MB of space, he resumes.

  My system is a laptop, vista 32-bit. No problem of security update is involved. I'm running version 10 and just want some memory back.

  If you feel you need to clear 90 MB. I suggest to get an additional storage medium (external HD,...). In any case, you can try the following:

  Run this fix from Microsoft: http://support.microsoft.com/mats/Program_Install_and_Uninstall

  Uninstall the reader using Add/Remove programs

• Error message about the price of the product?

  Someone got this before?

  ERROR: You have provided a 2 sale price, but quantity 2 is missing or less than or equal to 1. 2 quantity must be greater than 1. Ensure that you have provided a 3 sale price.

  But at the price of sale, one is $ 1.99. The PRT is 0.00 as we don't use it.

  The two retail price is $1.89 for 100 units

  There is no retail price 3.

  Minimums are 25.

  Nobody knows why, be funny? I would look in the knowledge base, but kb.worldsecuresystems.com is still broken...

  We managed to reproduce the problem and reported a bug with the team of dev on this issue. I believe that this will be corrected in the next sprint, but be on the lookout for BC messages blog as bug fixes are published there before each upgrade.

  See you soon,.

  -mario

• Get the error message about the COM port at startup

  Original title: COM port occupied at startup

  We get busy COM port when the system has been started and given are incoming on port.

  The COM port is connected to a PLC which retransmit if he didn't get a response.

  In this case our application cannot connect to the port.

  Is it possible that we can avoid this or is there a way to release a COM port?

  Thank you

  HR

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

• Comparing the use of the data store for the use of the disk on the server virtual computer: Match is not

  I'm a bit confused and could use clarification of a person.

  I'm looking to a virtual machine through the vSphere Client and it has an alert telling me that my free space data store is low. 17.55 free GB of 134,75 GB total capacity. I'm running ESX 4.0 for the host and my VM running Server 2008.

  I'm confused because when I connect to the virtual computer and check the use of disk in my computer, it does not reflect what vSphere tells me. This particlular VM is little used and the use of the disk under windows is very very low. About 20 GB.

  Can someone tell me why these numbers are not matching? I have other virtual machines that are in the same situation.

  Thank you

  Blake

  I think that you may be mixing two things up, the vSphere client will only warn about the data store, the VMFS volume, you have created and presented to ESX. You then create a VMDK file for your Virtual Machine to use. If you assign more than 80% of your data store to a VMDK or several VMDK then the customer will report a warning on its use. WARNING 80% 90% critical even if inside each VMDK file you may be using only a couple of GB.

  If you give a little more detail on the virtual machine and the data store, we should be able to get out.

  Hope this helps,

  Dan

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• I get an error message at the beginning: "Problem starting C:\Program Data\IntelBackup Online.dll"

  Original title: I get an error message at the beginning upward:

  "Problem starting C:\Program Data\IntelBackup Online.dll" under this line, it is said: 'the Spicific mode is not found' how can I fix?

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  Follow these steps and check if that helps.

  Step 1:

  Check if you have the similar problem with safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if that helps:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.