Sizing element

Similar Questions

• Item in the list of the spark 0 not visible

  Strange.  DataProvider contains an element to zero, but it seems not visible in the list.  Select the item that works very well and the data is there... it's just not visible.  Is this a known bug?  It happens with or without the custom skinClass.

  Any ideas?

  Don

  < s:List id = "topLeft" creationComplete = "topLeft_creationCompleteHandler (event)" dataProvider = "{photosDP}" borderColor = "0xffffff" borderAlpha = "0.3" skinClass = "TouchListHorizontal" width = "100%" height = "100%" itemRenderer = horizontalCenter 'ImageRendererPhotosThumb' = '0' red '0' = > "
  < s:layout >
  < s:HorizontalLayout horizontalAlign = "center" verticalAlign = "middle" / >
  < / s:layout >
  < / s:List >

  Try to give the Image an explicit width/height.

  Or instead of using mx:Image, try using a s:Label and show the URL in the form of text. See if the first element is visible in this case. There is perhaps a weird timing with auto mx:Image problem controls in a sizing element converter.

  Peter

• Auto alignment and sizing in form elements - cannot turn off

  For some reason any form I'm working on Acrobat 9 Professional on Mac, Leopard 10.5.8, has a problem.

  It has a feature enabled, I can't understand how to disable. Form items sizes and positions are not adjustable in the range micro as usual.  A button is a given height and can be set to two or three times (etc.), this height. Similarly, it cannot be moved in increments of same. It cannot be pushed.

  I'm used to be able to move with the mouse or the arrows such small increases that form elements seem infinitely adjustable in size or position.

  Is there a setting somewhere that disables this feature?

  See the PDF attached with transparent buttons on the first page (TOC).

  Thank you

  Steve Horn

  Have you line up on the grid running?

• CC 2015 do not re-sizing of elements in the sequence

  I just upgraded to Premiere Pro 2015. I'm converting a sequence of images of 2560 x 1440 1280 x 720 video. 2014.x exact workflow does not create the same results. Instead on the reduction of the size of the image, it is to deal with the image and using only the Center. The result is that low quality zooms in video. It my be a new parameter, or maybe I'm missing a step. My workflow is...

  -Right click in the project window and select Import.

  -Go to my sequence and insert it.

  -Drag in the timeline.

  -Right click on the clip generated and select the setting sequence.

  -In the Edit drop-down Mode select HDV 720 p.

  -In the timeline, right-click on the item and select makes and replace.

  -Export to the media.

  I just went through it again in which strikes and I see nothing else. I really hope that I can download a previous version. Please advise, thank you.

  By default, first will not resize images to fit the timeline, but crop as is happening in CC2015.  You can set the default action nationwide fit into general preferences, by checking 'default scale to the size of the image.  All new clips on the timeline will evolve to adapt.  I guess this has been checked in CC2014, but ran unchecked in CC2015.

  If they are already on the calendar select all and right click and choose 'adapt to the size of the image' or 'set to the size of the image. Scale to the size of the image makes it suitable, but if you start to zoom using the motion effect, it reduces the quality.  Set frame size changes the motion effect to adjust the image so that if zoom you in, then the quality is maintained.

• Should help the centering elements

  Hey, I'm trying to figure out how to center the elements on the page without losing their aligned side by side.

  Thank you

  Dan

  <! DOCTYPE HTML >

  < html >

  < head >

  < meta charset = "utf-8" >

  < title > home help - West Palm Beach to halfway < /title >

  <!-[if lte IE8] >

  < script type = "text/javascript" src = "javascript/html5.js" > < / script >

  <! [endif]-->

  < style >

  @charset "utf-8";

  / * CSS document * /.

  Article, aside, figure, footer, header, nav, {section}

  display: block;

  margin: 0;

  padding: 0;

  }

  {body

  do-family: "Trebuchet MS", Arial, Helvetica, sans-serif;

  Color: #000;

  background-color: #5fa026;

  margin: 0px;

  padding: 0px;

  }

  #container {}

  Width: auto;

  margin-top: 0px;

  margin-right: auto;

  margin-bottom: 0px;

  left margin: auto;

  background-color: #5fa026;

  }

  #maincontent {}

  margin-left: auto;

  margin-right: auto;

  top of the margin: 80px;

  padding-top: 10px;

  padding-right: 0px;

  padding-bottom: 10px;

  padding-left: 0px;

  }

  . Center {}

  margin-left: auto;

  margin-right: auto;

  }

  . Pod {}

  Background: #fff;

  padding: 10px;

  Width: 244px;

  margin-right: 13px;

  Display: inline-block;

  }

  {.podContent}

  margin-top: 10px;

  Width: 244px;

  height: 181px;

  overflow: hidden;

  }

  . Pod h1 {}

  background: #ccc;

  Color: #000;

  padding: 5px;

  background-image: url (.. / images/icon_chevron.png);

  background-repeat: repeat no.;

  background-position: 95%;

  do-size: 16px;

  Police-weight: normal;

  margin: 0 10px 0 0;

  }

  {a.Block}

  text-decoration: none;

  Display: block;

  }

  < / style >

  < / head >

  < body >

  < div id = "container" >

  < div id = "maincontent" >

  < div class = "center" >

  < section class = "pod" >

  < a href = "#" > < welcome h1 > < / h1 > < /a >

  < section >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  < / item >

  < / section >

  < section class = "pod" >

  < a href = "#" > < benefits h1 > < / h1 > < /a >

  < section >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  < / item >

  < / section >

  < section class = "pod" >

  < a href = "#" > < h1 > on the zone < / h1 > < /a >

  < section >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  Text < p > < /p >

  < / item >

  < / section >

  < / div > < / div >

  < / div >

  < / body >

  < / html >

  Give your container a width in pixels or as a percentage.

  #container {}

  Width: 90%;

  margin: 0 auto;

  background-color: #5fa026;

  border: 1px solid silver; / * for purposes of demonstration * /

  }

  {section. Pod}

  -moz-box-sizing: border-box;

  -webkit-box-sizing: border-box;

  box-sizing: border-box;

  Background: #fff;

  padding: 10px;

  Width: 30,33%;

  margin: 0 1 0 1%;

  display: inline-block;

  }

  Nancy O.

• Box border on gridContainer element?

  Hello!

  I use the grid system of fluid of DW on a site and it works very well for me.

  I put a thick border on the gridContainer element, to conform to the specification of design for this site. This also works well for my needs. He has just one problem:

  When displayed on a window mobile, part of this thick border gets cut on the edges of the viewport. I tried to change the box-sizing to the border box, by Nancy O here excellent post: using the box-border and padding in fluid grid

  This fixes the display problem, but I lose the characteristics of fluid-grid DW (as resize handles on the elements of fluid, etc.). Commenting on the box-sizing css on the gridContainer takes back the characteristics of the fluid grid, but it's a pain to continue to do that for my workflow.

  A small annoyance, but no one knows why put border-box on the gridContainer breaks the interface liquid-grid?

  Thank you!

  Bart

  bart_mc wrote:

  Thanks for your replies.

  osgood, I tried to put a div inside the gridContainer internal wrapper, but adding a border makes the larger inner div unless the box-sizing is the border-box. When I change the box-sizing border on the internal div box, he interrupts the characteristics of fluid-grid DW.

  Can paste you the html and css code in the forum so I can take a look and see if I can reproduce the problem?

  I inserted successfully an Interior

  and apply a border inside the gridContainer without any width being added.

  PUBLISHED:

  Mind you I wouldn't do that now I tried it as I found out that it disables the fluid

  handles - lmfao this jumble of Adobe has been well tested, not. so very bad.

  PUBLISHED:

  Right, I see in reading your post again once I posted earlier in my first edit, that's what you experience as well - the resizing handlles disappear from the grid.

• iSCSI SAN, ESX4 Datastore recommended sizing

  Hi all.  I am in the final stages of our construction of vSphere and I'm looking for best practices in terms of sizing of the warehouses of data/Lun on a SAN, iSCSI for several hosts of ESX4.

  What we have:

  Two HP c7000 blade enclosure with three BL460c in each enclosure.

  All servers will run ESX4 and use an iSCSI SAN (Software initiator).

  I'm not sure of the best way to configure these elements.  A large unit number logic holding a large store of data?  A few small LUN each holding a data store? A unit number logic/data store for each ESX host?  I don't want to use vMotion and who could help narrow down the answer.

  Any help that you experienced people from VMware can each give this noob is very much appreciated.

  -Dave

  Dave

  This is my golden rule.

  Virtual machines are mixed on data warehouses to optimize storage efficiency and the efficiency of the I/O - low mix I/O virtual machines with virtual machines I/O high on the same data store.

  VMs per VMFS datastore 12-16 maximum.

  16 VMDK files per VMFS datastore maximum.

  * A VMFS volume per LUN storage.

  * At least 15% to 20% of a VMFS data store should be left as open space to meet requirements such as the virtual machine swap files and snapshots.

  According to your needs - you will initially 30 virtual machines, you must look for set 2 data warehouses-, but the number of vmdk files or e/s for a virtual machine needs can change that.

• iPhone 7 more (Black - 128 GB) still "processing Elements"!

  Hello

  I ordered my iPhone more black 7 128 GB on September 9 in Dubai (pre-order day itself) and it showed that the delivery would be from 4 to 10 October. Today IS OCTOBER 4 and my order status is STILL "Of ELEMENTS OF TREATMENT." I don't understand why its always 'treatment Items' in the week of delivery.

  How would it take for the process to go further.

  If someone has an idea, pls let me know!

  Thanks for reading.
  Waiting for answers,
  See you soon!

  Hello

  You will receive a shipment notification when your order has been shipped, and to access the tracking information.

  I'm afraid that no one here can tell you when it will be.

  It is a community of support based on the user.

• What are the elements appear on the screen of the ATV 4

  What are the elements appear on the screen of the Apple TV4

  Initially just the settings and a few applications for iTunes movies, music, TV shows etc, then this is all the apps that you download from the store.

• Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  Hello I am trying to download an episode of my Podcast podcast connect and get this error?

  Impossible to analyze your diet. Invalid XML: error on line 190: name of the "disabled" attribute associated with an element type "button" should be followed by the "=" character.

  my diet is validated? http://beprovidedhealthradio.libsyn.com/RSS

  It worked for my first episode? I don't know why it doesn't work for the second episode. I also use Libsyn if that helps.

  Your show is already in iTunes.

  https://iTunes.Apple.com/podcast/id1151562400?MT=2 & ls = 1

  And everything seems fine with it and your diet.  You ONLY SUBMIT YOUR FEED ONCE.

  That's it - better to stay outside of your podcast connect account - only bad things happen to go there and play with things.  Once again, your show is very well and is in iTunes and your flow is good with it.

  Both episodes show when you subscribe - and your most recent episode appears on the page of the iTunes, general store with in 24 hours from when you posted it.

  Rob W

  https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2 https://iTunes.Apple.com/us/podcast/beprovided-health-radio/id1151562400?MT=2

• Save the transitions as elements?

  I have a bunch of movies that will need the same transitions intro and outro, is there a way to save the transitions as an element so I can just copy and past them in quickly?

  Thank you.

  You can save short assemblies and projects with transitions between dummy clips.  You could then copy and paste into a new project and replace the dummy clips without affecting transitions.  Drag the new video on the model so the green '+' sign shows and then select "replace".

  Geoff.

• Adobe Photoshop Elements 14 will not install on new MacBook Pro

  Apparently, 14 PS elements is not compatible with OS X El Capitan. Everyone knows this? Older versions of components are also incompatible? I need this on my laptop... really disappointed that I can't install it. Thanks in advance.

  Contact Adobe. They say that it is compatible.

  http://www.Adobe.com/products/Photoshop-elements/tech-specs.html

• 38.2 same mode without failure: preference pop-up window shrinks as I click between elements

  This problem there are several updates. When I open the preferences, the pop-up window is smaller than it should be. Some of the items in the pane are under the bottom of the pane (and there is no resizing on these components) and truncated on the right visible elements.

  Whenever I click between the sub-items, as between Composition and display, the vertical size of the window is reduced, until there is nothing else that an empty area of 1/8 "

  try disabling hardware acceleration in options > advanced > general.

• Uninstall Adobe Elements 6

  I was informed that I could uninstall it goes and opening

  < Macintosh HD > \Applications\Utilities\Adobe Installers\Adobe Photoshop Elements 6

  But when I try to open the installation folder I keep said he wants to make changes and ask my computer password, which I offer, then the folder install disappears.  Try again to get the same result.

  This app is on my OS 10.1.6 iMac computer because when I got it, I've migrated all stupidly my AirBook (run 10.11.9) and it does not work well and can cause computer problems. I bought a 14 items and I would like to first of all clean.  I think that I shouldn't just trash, but I'm tempted.

  See the following topics:

  Basics for uninstalling software

  Most OS X applications are completely independent "packages" that can be uninstalled by simply dragging the application to the trash.  Applications can create preferences files that are stored in the folder/Home/Library/Preferences /.  Although they do nothing once you remove the associated application, they take up little space.  If you want you can find them in the location above and delete them, too.

  Some applications may install an uninstall program that can be used to remove the application. If you can't find the uninstall program you can download the free software, easy to find, to locate the files that must be deleted. Places you should look for include:

  1. / Home/Library/application support / folder. Check if the application has created a folder, and then delete the folder that is located in the application Support folder.
  2. Applications can install a startupitem, or Item Log In.  StartupItems are usually installed in the folder/Library/StartupItems/or in the folder/Home/Library/StartupItems /.  Journal items are defined in the preferences users and groups.  Open the 2003′s preferences, then click the login items tab.  Select the item in the list and click the Delete button [---] to remove it.
  3. Some software uses demons start or agents.  Look for them in/library/LaunchAgents/Library/LaunchDaemons/or in/Home/Library/LaunchAgents /.

  Some applications install a reception in the folder/library/receipts /.  Usually with the same name as the program or the developer.  The element typically has an extension ".pkg".  Do not forget that you also remove this element because some programs use to determine if it is already installed.

  There are a lot of utilities that can uninstall applications.  Here is a selection:

  1. AppZapper
  2. AppDelete
  3. Hazel
  4. AppCleaner
  5. CleanApp
  6. iTrash
  7. AppBolish
  8. AppUninstaller
  9. Uninstaller

  For more information, visit The FAQ XLab and read the FAQ on the removal of the software.

• Inspect element: pull the video (YouTube)

  I use a Terminal application called "youtube-dl" (https://github.com/rg3/youtube-dl/blob/master/README.md#readme) to get HTML5 YouTube videos, but I would like to know the best way to make heads or tails of the feature "Inspect element" in Safari to achieve the same thing.

  I can't figure out how to get the pictures, but not video for some reason any.

  It's because you can't.  Inspect the element will just show you the source code of the html in question element. For Youtube video containers, the more you will get from him is the same url you see in the address bar.