2nd T510 external monitor no longer works

Similar Questions

• 2nd screen duplicate of the external monitor no longer works

  I used a 2nd external monitor [TV] for many years, my duplication laptop screen. All of a sudden the TV screen will not appear anything but a black screen with the PC on this subject. In the customization, it indicates that the external monitor is connected.  If I go into display settings - settings-list all the modes-it doesn't show that 63 hz 60 Hz I front of tip - what happened & how to repair my external screen 2nd at work?

  Dpon can't forget to set the TV to the input matches the output on your computer.

  Try these:

  1. press on the keyboard shortcut that turns on an additional display.

  The FN + F5 keyboard shortcut is used for this purpose on many laptops. To determine what keyboard shortcut turns on another view, see the documentation that came with your mobile PC or go to the manufacturer's Web site. On my HP laptop, it's the F4 key, there two image from monitor on it.

  2. open Windows Mobility Center by clicking the Start button, click on the Panel, clicking Mobile PC, and then click Mobility Center Windows.

  Then, on the external display tile, click Connect display.

  You can also click on the button "Activate" on the presentation settings tile.

  3. turn on the dual display
  Make a click right on the desktop, Graphics Options, Output To, Dual Display Clone, notebook + monitor (it may vary I use a HP laptop).

  ASO, read this:
  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

• The top of the window disappeared. Cannot minimize and two monitors no longer work

  Hello! It's really stupid, but from what I understand, I must have pressed a shortcut to something because now the top of my window disappeared (you know, the part "minimize", "maximize" and "Close" buttons). I found an explanation in the face of the same problem with illustrator, and the guy has resolved:

  "In the Illustrator menu bar, click"Window", then"framework of Application". It seems that the unchecked option will leave the application 'attached' to your primary monitor. Audit, he will place the application in a window of 'free form' that you are free to move. »

  This article describes my problem and and provides a solution, but I can't seem to find the setting of "application framework" in first CC. Help, please! Strange how dual monitors no longer work, despite their work earlier today, so I assumed that my window is maximized touched it. Don't know what shortcut, I pressed. I tried to reset the workspace.

  Thank you!

  ALT + space, then "maximize" worked. Seen that option earlier, but only tried the option reduce...

  Monitors to work as it should.

  Thank you much for the help!

• External keyboard no longer works

  After a few hours of update for Sierra.

  Razer blackwidow... my razer mouse works fine.

  Tried everything: restart, reinstall synapse, disconnect/reconnect. Sometimes, it works in a field to enter a password and then no more.

  Extremely annoying and I can't use my external monitor thanks to this question now.

  Same problem here. Logitech K400 more and Microsoft Wireless Keyboard 2000. It seems that it doesn't recognize keyboard properly, does not answer A, H and I traded, down left / is §... Looks like a bug in the system.

• External monitor does not work on Vista of Tecra M7

  My external LCD monitor connected with analog cable doesn't work on my Tecra M7 with Win Vista and latest driver downloaded today on this site to display. Display of Windows Mobility center see the trendy, office is extended to the second screen and Windows display settings dialog box shows the correct resolution of the external LCD. But there is no image on an external monitor (with the 'no signal' message just after turn on the monitor).

  Any changes to the display (resolution, type of display (mirror, second screen, primary/secondary)) the settings do not work.
  Monitor works fine with my old laptop and Windows XP.
  If I restart my computer M7 laptop with connected external display I see loading messages and windows on external monitor logo and after that I see only painted while internal lcd to my laptop is black and I can't move at all internal lcd in this case (only restarting with external display disconnected works in this case).

  Hello

  Did assign the external monitor as the main screen in the graphics properties?
  I think you did this due to the fact that the Toshiba splash screen appears on the external monitor.

  But just moment please. The Tecra M7 was delivered with Win XP Pro tablet edition and not Vista.
  Have you installed it you own hand?

  I guess that everything worked running Win XP
  Maybe you should try to remove the graphics driver Vista system and use one from the 3rd site like www.laptopvideo2go.com

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• External monitor does not work with Tecra M Series

  Hello

  I'm trying to connect to an external monitor, however it is not working properly. The monitor works fine with another laptop so I know that the monitor is ok.

  When I first start the lptop I get the screen then I XP Flash on the external monitor perfectly clearly, however when it will boot Windows XP the external monitor goes haywire.

  Advice/suggestions would be appreciated.

  Either way, I just updgraded all display drivers and BIOS but with no solution to the problem.

  Thank you very much in advance for all help/tips.

  King Tony

  Hi mate,

  my suggestion is to reduce the resolution for the external montor. Maybe you have the problem that the resolution and frequency h/v is not defined as it should be.

  When starting your laptop, then let the disconnected monitor. When the machine is running, then connect the monitor to the machine (it s OK, it s not dangerous or something) and then go into the control panel for the graphics card. There you can set the options for internal and external monitor.

  Set the minimum resolution for the outside and try to activate him. It should work normally...

  Please tell me, what kind of machine do you have? You need to give more information, so maybe other people with the same machine can help you.

  Welcome them

• my screen is black at the start. not bios. No beeps. external monitor does not work either.

  I have a G62-343NR which suddenly stopped working after I tried to do a Windows Update.  At the present time, when I try to turn it on, I hear the fans whirring and the HD, kicking, but there is no beeps & my screen remains black.  The wifi stays on, but my caps lock button will Flash.  I thought that the screen has gone bad, but when I plug my external monitor, it does not show something or the other.  I tried to insert a Windows 7 installation disc, but nothing appears on the screen, and no beeps are heard.  The fan is turned on.

  Any ideas or solutions?

  It was running Windows 7.

  Hello

  It looks like not a component on the motherboard does not, but it is worth trying the following.

  In regards to the link below, delete one of your modules of memory and then see if the laptop will start.  If it doesn't, try the same module, but in another location.  If it is still won't start, try just the other memory module in both slots, to see if any combination will allow the laptop to start.

  The procedure for withdrawal of these modules is detailed from Page 55 of your & Maintenance Guide.

  Kind regards

  DP - K

• Using two monitors, no longer works

  On windows 7, until today, I used a single monitor to display my desktop icons for word etc and the second to display my e-mail outlook etc. For some reason, the second monitor is empty. I checked the settings and all seem to o k and I am able to switch the monitor to the other and back again by changing the settings with the resulting effect, the other empties. Both monitors do not work properly. I tried to keep to a minimum the program (say outlook) to drag from one monitor to the other, but he won't move to the second screen. This has happened when I turned on today so I tried to restart the computer to no effect.

  In addition to the suggestion of Palcouk, tapping the Windows key + P will bring up the projector options where you can select Extend.

• External microphone no longer works

  Number and name of the product
  HP Pavilion Notebook PC, LS303EA #AB9 g6

  Operating system installed
  Windows 7 SP1 x 64

   

  
  The axis of the external microphone suddenly stopped working, worked perfect until after the update of the latest major application installations.

  Checked the sound devices, external line is displayed as installed butrecognizes no sounds, attempt of drivers updated but no new drivers.

   

   

  Audio specification (according to HP support request):

  -IDT high definition audio CODEC (stwrt64.sys), version 6.10.6324.0

  -Intel (R) display Audio (IntcDAud.sys), version 6.14.0.3074

   

  PS. : internal microphone still works, also the connected microphone still works on the other computer

  Hey coolasc,

  If you have a lot of updates come through, you want to make sure that the BIOS is one of them.

  BIOS stands for Basic Input/Output System/Service. It is the language that all the hardware components of your computer use to communicate with each other. There are updates coming out from time to time for this and it would be better to have the latest version. The following steps have been taken from here.

  1. Windows 8: from the home screen, type "msinfo32". Click msinfo32 in the list of results.

  Windows 7 & Vista: click the Start button, type "msinfo32". In the list of results, click msinfo32.exe.

  1. Subject to halfway down on the right, look for the Version of the BIOS/Date.

  3. copy and paste the information to the right of the Version of the BIOS/Date in the value column, in your answer.

  The latest version on the Page of Drive HP laptop your particular is F.66. It could be that a lot of other than the BIOS updates came through and just BIOS didn't cross quite yet (if this is the case, it would be nice to manually install the latest version). If you have a version higher than F.66 by chance, return to F.66 just download and install it.

  The BIOS being outdated or just not synchronized with other updates that came through, would certainly provoke a question like that.

  Please let me know if you have any questions or if these suggestions helped (it could help other people with the same problem). I'll keep an eye out for your answer!

• External microphone no longer works on Satellite M40 PSM44

  Hello
  I have the problem with the external microphone on my satellite M40 PSM44. When I connect it do all the settings its fine for a while to work.

  All of a sudden it stop working. After that I had to uninstall audio drivers and install it again and it still works for awhile.

  This happens often when calling scype. Is it that someone who can help me with my troubles?

  Thank you! :-)

  Hello

  A friend of mine had a similar problem in his notebook.
  But it happened after installing certain applications to listen to internet radio exploited? ¦
  Seem different programs has a bad influence on the allowed sound? ¦

  Some M40 models support the Realtek ALC AC97 250 sound of chipa? ¦
  Go to the website of realtek and download the latest audio driver supported.
  The update should helpsa? ¦

• My monitor no longer works. What is amd64?

  I get a quick message that my monitor is not responding and then recovers. I saw where the wrong USB port is used. I've also seen AMB 64.

  Amd64 is a processor

  You mean actually "Graphics driver has stopped working' and does NOT monitor...?

  If the PC is a large manufacturer or your laptop, reinstall the chipset drivers & graphics of this PC manufacturers support site

  Graphics or monitors do not use a usb port

• Drive external DRIVE no longer works after windows is running 10 updates

  DTMB BDA TV USB

  Now get the above results. Past the USB ports but... does not really feel ticked off the coast with this problem.

  P.S. The good external drive on my laptop running windows 7 pro.

  Hello

  Thanks for posting your query to the Microsoft forum.

  I apologize for the delay in response. I will definitely help you with this.

  I would like to know;

  1. What operating system is currently installed on the computer?
  2. Have you upgraded successfully to 10 Windows in Windows 7?
  3. When you get this error message?

  Please follow the steps below and check the issue.

  Method 1: Run the hardware troubleshooter

  You might be able to solve certain problems by running a convenience store will automatically fix some common problems with the hardware.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Uninstall the USB drivers.

  Follow the steps below to uninstall the drivers.

  1. Press the Windows key + X , and then select Device Manager.
  2. Expand Of Bus USB controllers and click on each USB controller.
  3. Select Uninstall.

  Restart the computer. It will be re - install the USB drivers. Check whether the problem is resolved.

  Method 3: Perform the scan SFC

  I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link: use the File Checker system to repair missing or corrupted system files

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  ______________

  Thank you best regards &,.

  Isha Soni

• TOSHIBA external drive no longer works

  Hello

  I bought maybe 4-6 months there is a Toshiba E05A100SBU3EW_C STOR. E ART 4 1 TB USB 3.0 2.5 inch hard drive - black from amazon and one day all of a sudden, it stopped working and I was wondering if anyone knew how to operate again on my mac or windows, please because it has lots of important data

  You understand that, on this virtual path is not esy to help. We don't know what the problem is here.
  Is the HARD drive recognized when you connect it to the PC?

  Warranty is still valid?

• Envy 27-k: external DVD no longer works with Windows 10 update

  I get the message windows cannot verify the digital signature for the drivers required for this device. Up to present Microsoft and DVD manufacturer threw their hands.  Need help because I use this device on a regualr basis.

  Hello:

  See if do one of the troubleshooting steps from the link below solves the problem.

  https://support.Microsoft.com/en-us/KB/314060