Skype, causing the audio crash

Similar Questions

• CanvasClear causes the application crash

  I use a simple rectangular control canvas with movement indicator (Vshape) that displays the currently measured value.

  The value is updated 10 to 14 times per second, and deliberately, I made these values fluctuate.

  The canvas is filled with gradient colors (5 ranges) and the indicator moves upwards or downwards. In order to redraw the indicator,

  I use CanvasClear with the VAL_ENTIRE_OBJECT attribute and then redraws its content.  A few days ago, I noticed,

  that the software crashed, when the Panel containing the canvas control, was behind another window (belonging to an another SW

  tell the programmers Notepad or msword). I was able to reproduce the crash, which occurred immediately, but

  After that the software worked anywhere from 0.5 to 5 hours and the questionable control was behind another window.

  I also have seen, before the accident, if I move the window covering away from the canvas control, rectangle covered

  becomes black (break in non-se mode, it remains white) and it takes several seconds to redraw the partial region.

  Sometimes I noticed irregular elements (a diagonal line, not planned, from the left corner down to the right).

  Labwindows2010 IDE always shows crash-point as a call to CanvasClear().

  None of the functions, manipulating the canvas control, the return of negative values, because the software checks to see if it and if found newspapers a

  appropriate message. The canvas control has to draw political as mark for update.

  Does anyone has an idea how to everyone such instability or how to solve this problem?

  I was also able to capture the call stack and dismantling:

  Unhandled exception at 0x6850226E (cvirte.dll) in sw_dbg.exe: 0xC0000005: breach of access writing location 0 x 00000000.
  6850226E

  68502258 or eax, 0C00h
  6850225D mov dword ptr [esp + 50 h], eax
  fldcw 68502261 word ptr [esp + h 50]
  fistp 68502265 dword ptr [esp + h 50]
  movzx 68502269 eax, byte ptr [esp + h 50]
  6850226E mov byte ptr [esi], al / / the esi content is 0
  movzx ecx 68502270, byte ptr [edi]
  fldcw 68502273 word ptr [esp + h 54]
  68502277 imul ecx, ebx
  6850227A mov dword ptr [esp + 50 h], ecx
  6850227E fild dword ptr [esp + h 50]
  68502282 fdiv qword ptr ds: [68802D40h]
  68502288 fadd qword ptr ds: [68802D38h]
  6850228E ptsps qword ptr [esp]
  68502291 call 687D 5950

  Call stack:

  cvirte.dll! (6850226e)
  [Frames below are may be incorrect and/or missing, no symbols loaded for cvirte.dll]
  cvirte.dll! 684d149c)
  cvirte.dll! 687b036c)
  cvirte.dll! 687b09c2)
  cvirte.dll! 684d9759)
  cvirte.dll! 684d9981)
  cvirte.dll! 687b 5850)
  cvirte.dll! 687bc167)
  cvirte.dll! 687bd40f)
  User32.dll! 7674c4e7)
  User32.dll! 7674c5e7)
  User32.dll! 7674c590)
  User32.dll! 76744f0e)
  User32.dll! 76744f7d)
  ntdll.dll! 779c6fce)
  User32.dll! 76744ec3)
  User32.dll! 76741be4)
  User32.dll! 7673ffcd)
  cvirte.dll! 687c13c1)
  cvirte.dll! (68483419)
  cvirte.dll! (68722687)
  cvirte.dll! (68729882)
  cvirte.dll! 68525b8b)
  cvirte.dll! 686042a 6)
  cvirte.dll! 6846d7dd)
  cvirte.dll! 68557bcc)
  sw_dbg.exe! (00402470)

  Sorry for the delay in response. I followed a red herring for a few hours when troubleshooting this. It turns out that this could have been resolved much more quickly using the resource followed in CVI. If you have the full development system, you can change the compiler Options > debug to cabins lying level and then open the window > Resource Tracking. This will show you all the memory and handles your code currently open. It will appear when the elements are created, changed, or destroyed. Looking at it when your application is running (you need to suspend execution at a breakpoint to see the tracking of resources), you will see that the program continues to create plots that belong to the curve of the COLORSCALE. It is your intensity graph. If you look at using the function for PlotIntensity, he recalled in a note that a new trace is created every time that you call this function, and you want to get rid of these plots with DeleteGraphPlot.

  You can add something like this in InitScaleData.

  if(plotHandle != 0)
  {
          DeleteGraphPlot (IndicatorPanel(0), IND_COMP_COLORSCALE, plotHandle, VAL_DELAYED_DRAW);
  }
  plotHandle = PlotIntensity (IndicatorPanel(0), IND_COMP_COLORSCALE, scaleArray, 2, OGL_SCHEME, VAL_DOUBLE, gColorMap,gColorMap[OGL_SCHEME-1].color, OGL_SCHEME, 1, 1);
  

  I don't think you run necessarily in a memory problem here throwing the parcels. Intensity plots use rather a small number of GDI handles. In Windows Vista and 7, the number of GDI handles is limited to 10,000 by a Windows registry key. I look at the number of open GDI handles in the process Explorer reveals that 10000 handles were open when the application crashed on my system after about 45 minutes of execution.

  Let me know if it works if you have a chance to try this solution.

• Skype causes the freezing of the screen when I make a call.

  I read so many subjects of this, everything tried and Skype still causes my screen to freeze, resulting in a reboot when I try to call someone or vice versa. I use the latest version of Skype. I tried different versions, reinstall several times and I do not know what to do now.

  Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• How to know which update causes the system crash

  Can you tell us how to check the update is the culprit?

  Hi Steve,.

  Inorder to know which update is the cause of the crash of the system, you can install the updates one by one. Firstly uninstall the updates that have been recently installed.

  Uninstall the update:

  1. click on start and type "update installed" in the searc box. Click on view installed updates

  2. right click on the update you want to uninstall. Once the uninstall is complete, reboot the computer.

  3. install the updates one by one.

  You would get to know what update is at the origin of the disorder. You can hide this particular update.

• .png file causes the program crash after playing two seconds of video.

  Whenever I have a .png file with 2 video files it says program does not, then after a few seconds it crashes when video plays in comp. This is a really annoying error I tried to correct for the last 3 hours.

  I'm this tutorial: Adobe After Effects - Glitch Tutorial - YouTube

  Here is a video of what happens: Dropbox - 20150604_110918.mp4

  I realized that it was the .png file, because when I took on this worked. I tried to put a smaller .png in the video, but diddnt work either. I have no idea why this is happening and I even tried to run it on my other computer and it does the same thing.

  I hope that someone will know what is happening.

  Thanks in advance!

  The problem is not with the .png file, this is the bug screen - Free Stock Footage.mp4 file. It is all dirty upwards and blocks almost all applications that I am looking to use to render a new copy. Just open the MP4 in Quicktime format you get something that resembles images for the first 2 seconds and then it freezes just give you this:

  

  It is a corrupted video file, and this is what is causing your problems.

• Satellite L655 - upgrade RAM causes the system crash

  I bought and inserted 2 RAM Kingston 4 GB chips. When I boot the Windows and Ubuntu 14.04 (I have a dual boot) fails.

  If I run a test memory Ubuntu start menu, the system hangs.

  I put the old RAM and all is well.

  To resolve this problem, I tried upgrading the BIOS firmware using the software available on the Toshiba site, but it gives me an error saying that the battery must be fully charged and the power adapter is connected. A fully charged battery with the charger plugged still gives the same error. I replaced the battery, which was old and lasted 5 minutes, but the error remains on the upgrade of the bios.

  Any ideas what could be causing this would be appreciated.

  Can I get hold of a BIOS upgrade CD ISO which does not check the status of the battery and the charger? I promise you I will not let the of of the machine while upgrading the bios is going forward!

  Thanks in advance.

  Hello

  At first, I must say that updating the BIOS won't help you any. Many people think that the update of the BIOS is a kind of "quick fix" for different questions.
  In my opinion there must be a compatibility problem. Did you buy the memory right modules approved for your system?

  I don't know what 665 do you have exactly, but I think that you need the modules of DDR3 - 1066 MHz and 4 GB of RAM has part number PA3677U-1M4G.

• Remove an image grounded causing the constant crash

  IM using CS6

  First off I was having problems with images embedded in this thread: http://forums.adobe.com/message/5669204#5669204http :// is when the problem occurred.

  Well right that it seems I am arrives at the solution to my problem, a new problem arises. Now every time I try as much as change or even delete the image I changed settings achor on, my CS6 crashes instantly. Now I can not remove this image at ALL. Help, please.

  I feel really stupid about it being it's simple, but delete the WHOLE text block seemed to work. However I will keep this thread for reference in case the same thing happens to someone else. (I could not find another post in this topic).

• Navigate the list fonts causes the Muse crashing

  Just started using Muse today. Whenever I scroll the list of fonts to change the single line of type in the header of the page master, Muse crashes. No alert window opens just the standard dialog Apple asking if I want to send a report to Apple. OS X 10.8.3, 3.4 GHz Intel Core i7 iMac, 32 GB 1600 MHz DDR3. Help! In case it helps, I just tried creating a file - a master, a single page. I created a text box, typed in the word "dog", and then scrolls through the list of fonts. As soon as I hit 'Courier', there is no other fonts listed, and that's when Muse crashes. It happened three times in a row.

  The problem is solved thanks to Zak Williamson. He wrote: ' we expect there is a specific font on your computer that is installed as a police Type 1 in/Library/Fonts and OpenType font in ~/Library/Fonts and it's confusing Muse (which does not support Type 1 fonts).»

  The offending police proved 'Courier FInal Draft' since the application of the Final draft Screenwriting. Once I removed that it draws from the police, Muse stopped crashing.

  Thanks a lot for the quick response!

• Microsoft 3500 wireless mouse causes the computer crashes?

  I recently bought the microsoft 3500 mouse - I used the 4000 before on this computer, and it worked well and was a good mouse, so I decided to buy it. I installed it last night (Windows had some difficulties to recognize the software), and it worked fine. I left the USB plugged when I turned off the computer.

  I tried to start this morning and my computer froze and did not go beyond the screen initial screen/first of the motherboard - it wouldn't even go to BIOS. It started off fine, however, when I disconnected mouse USB and tried to start without him. Anyone has an explanation as to why this is happening?

  Check in the BIOS as to ensure that the BOOT sequence does not list USB before the floppy drive / CD / hard drive.

• Release of e-mail causing the Internet Crash

  I'm on @yahoo.com, my husband is on @att.net. When one of us leaves email, message IE works do not, Windows looking for a solution appears. (never found a solution) must either refresh (sometimes set) or restart IE.  HP Pavilion, Windows 7 64 bit, IE9

  Hello

  Try resetting Internet Explorer as follows - be aware that this will remove bookmarks and saved passwords etc

  Open windows control panel, open Internet Options, click the Advanced tab, and then click the reset button.  Click 'Yes' or 'Ok' for all additional guests needed to complete the process.

  Kind regards

  DP - K

• Muse slideshow change causes the error & crash

  I have a slide show full-width on my site.

  I have 3 stop 1200, 780 points and 417.

  I want to make a change to the slide show, then I click it and bring up thumbnails.

  Now, it seems that ANY change, either remove an image, or change the order of the images revealed this error message.

  

  MUSE, then closes.

  Here is the error in-situ...

  

  Would appreciate any help or an update to correct.

  ALSO - I just noticed what happened when I opened the thumbnails and clicking on one of them.

  Apparently can be nothing to do with deleting or moving only to open and licking action.

  Thank you

  Hello

  Please see Muse error-P incompatible a number of children through breakpoints in text U199116 [was: Muse has encountered an error]

  Abhishek

• Built-in Windows 8 camera causes the crash

  I have a 15 dashboard recently I upgraded to Win 7 Pro for Windows 8 Pro.  Everything seems to work fine EXCEPT the built-in camera.  Whenever I have try and use it with Skype, it causes the computer crash blue screen with a KERNAL_SECURITY_CHECK_FAILURE.  Check closely, there seems to be a lot of complaints about this, but no new update driver Win 8, Lenovo.  Any information would be appreciated...

  Hi, studew

  I have a workaround possible for you until Lenovo can release the camera built into your system and Windows 8 driver.

  If display you the charm bar from the desktop or the main screen of the metro and select Search, then type "Troubleshooting" and change the filter settings, a parameter called Troubleshooting should appear. Select this option. A list of programs should appear. Scroll down and select Skype. From there you should be able to put Skype to run in Windows 7 compatibility mode.

  Because you are using a Windows 7 driver for your computer, as it was the last version, then Skype running in compatibility mode with Windows 7 can help you use your camera in this function.

  Hope this helps and let me know how it goes.

  Adam

• Skype or last update causes the disconnection, accidents

  Have used Firefox for several years. Today, I was forced to upgrade to Skype 7.1. Immediately after the installation of Skype, Firefox would be is more to connect to internet or load web pages (tab "connection... ("say forever). Other applications and browsers work fine and there is no interruption to the internet connection of the PC. After about 2-3 minutes of this, Firefox will crash if left alone.

  After that, firefox.exe remains as a process and can never be completed. I try 'end process' and 'End process Tree' in the Manager of tasks without success.

  Firefox remains a task in the Manager of tasks forever, even when the browser window is closed. If I try to re - open Firefox from there, I get the error "Firefox is already running but is not responding". When I click on "Close Firefox", I get a new error message that says: "cannot load your Firefox profile. It may be missing or inaccessible. After that I'm 'OK' of this, I can't do anything else that to restart the computer to get rid of firefox.exe Manager tasks... and then the cycle repeats.

  Not sure if Skype is to blame that Firefox updated itself today. I blame Skype because it was the same Weird hanging in the Task Manager without ever closing until I disabled the video processing in Skype (and due to the suspicious timing).

  I tried clean re - installed, running Firefox with disabled modules and re - install Skype as well. Same behavior in all cases.

  Any suggestions? Note that I am submitting this from another machine.

  This may mean that a loaded program is causing the problem.

  What type of blocking programs do you use?

  Check the programs that are on your computer

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux: See your user manual.

  Go through the list. If you find something that you do not
  know what it is, use a search on the web.

  The problems of Firefox caused by malicious software {web link}

• Jump in the middle of an audio track streaming on various sites causes the stuttering and audio glitch

  Hello

  Please refer to this thread for support on the technical support of SoundCloud forums. The thread contains all relevant information, including videos of the screenshots problem and console, made by myself and others. https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox

  In short, when you try to move forward for streaming audio, there is a memory buffer/stuttering problem that prevents a correct reading of the track. This problem is confirmed on SoundCloud and Traxsource and other people in the support thread mentioned Mixcloud and other streaming sites. In other words, it is not the special streaming service fault or another.

  The problem does not occur in Microsoft Edge, Internet Explorer or Chrome. Well, to clarify, when the issue was published on SoundCloud support forums, Chrome was having the same problem. However, they made a version a few days ago thrust, that fixed it.

  Here's my original on the SoundCloud support post (less), which has the relevant details. Note that we have updated both Flash and Firefox recently, so although I have mentioned earlier in my original post, everyone involved has since updated their browsers and Flash.

  From now on, the only solution for the problem is to go back to Firefox 40.0.2. Thanks for any help =)

  Matt

  Original message =.

  Jump in the middle of a track causes the stuttering and audio glitch (Firefox).

  I am running Windows 10 Pro.

  There seems to be a problem of caching that affect reading - I started noticing this problem three or four days ago. Previously, I could jump through my feeds at will, go straight until the middle of the tracks or mixes of listen seconds and determine if I liked the track. Now, I can't do it on Firefox 41.0.1. The problem is simply annoying on songs that are 3 or 4 minutes in length, as I must leave "cache" maybe ten seconds before jumping. Unfortunately, the problem is a game-breaker on mixtures which, for example, are 90 minutes long. If I jump to a point directly in the middle of the combination, nothing happens. The play button alternates between the 'Play' symbol and the symbol of 'Caching' ('... "), and so audio resumes, it is glitchy and consists of different parts of the track being played at the same time.

  I've eliminated my internet connection as the source of the problem by loading on board. On the edge of 20.10240.16384, the problem does not exist. I can scroll down to any mix of 2 hours in my stream, click on the middle of it, and the audio starts right up. No caching, without stuttering or glitching.

  I drove back Flash version 18 to see if it solved the problem in Firefox, but it did not. The problem persisted, so I re-updated to Flash 19.

  Yes, I understand how all versions and updates to work. I meant it as a generation of powder magazine. My bad.

  I consider this problem to be solved. Several different pre-release versions of Firefox have solved the problem; I have personally used both of them that work perfectly. A representative of Bugzilla stated that the patch will be integrated into Firefox 42, which will be released on 3 November.

  https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox?topic-reply-list [Settings] [filter_by] = all & question-answer-list [parameters] [reply_id] = 16269116 #reply_16269116

  I now consider this private matter. Thanks to all of you who have been here =)

• How to fix Firefox 31, 0-1 crashing on the Audio-Api - for example on quizlet.

  Dear Firefox team,

  Since yesterday (after the updates), Firefox hangs when it tries to play a sound. I think because of the Audio Api? It crashes on Google-Mail and Quizlet.

  For quizlet, I found a site where they describe how their sound: http://quizlet.com/help/how-does-audio-work-on-quizlet

  When I opened the file audio-test firefox crashes instantly without an errormessage. Here you get the example file: http://a.s.quizlet.com/en.mp3?v=5 & b = SWYgeW91IGNhbiBoZWFyIHRoaXMsIGF1ZGlvIGlzIG5vdCBiZWluZyBibG9ja2VkLg & s = LAhrMA-0

  Can I do something about it? Its really hard for me to understand why it crashes.

  Hey again once, unfortunately I can't reproduce the problem on a windows pc and the console log is not very descriptive (at least for my level of knowledge).

  If you can reproduce the same breaks down while you use firefox in safe mode, I would recommend filing a bug to the bugzilla.mozilla.org of this regression, so that developers have a closer look.