Skype for Symbian: cannot copy the text!

Similar Questions

• Cannot copy the text, OCR cannot copy for translators, recognization of manual and scanned text, text of manuals, Non - English text product impossible to translate

  Revision of textbooks online, we are facing difficulties following.

  Could you please suggest any solution (purchase of adobe software) to meet the following requirements.

  1. Manual language: failed to copy the text to the translation of Google.
  2. OCR (OCR): impossible to copy the text to translate.

  3 Manual of scanned text recongnization

  
  

  Currently, we use Adobe Reader version 11.

  
  

  Please address the above query as soon as possible.

  
  

  Thanks and greetings

  Suresh
  

  Adobe/Acrobat Reader cannot perform text recognition; you will need Acrobat for that.

• Cannot copy the text

  Greetings,

  The command copy (ctrl + c) can be disabled for certain documents? It works in most of the documents, but in this particular PDF one, when I select text, typing ctrl + c does nothing. If it is disabled, is it possible to re - activate in preferences?

  Thank you

  Shane.

  version 2015 (15.7.20033.133275)

  May be that the document is protected.

• Cannot copy the text of the excerpts

  Hello

  I read a book by programming Java on Adobe Digital Editions, and so far I've been able to copy excerpts from the book. Especially the code so that I can run the examples in Eclipse. However earlier, it won't let me copy more. The right-click menu is grey and using Ctrl + C does not work either. I tried to return to previous pages to see if maybe I was only allowed to copy chapters 1 or something, but now I can't copy text, I already could.

  I tried to restart the program and my machine, but the problem still persists.

  Is this something to do with it (see below)? Am I only allowed to copy text 15 times?

  

  Seems that the creater has copy blocked by 15.

• Cannot copy the translated web page of Google Translate text?

  It seems that this has happened after the last update of Firefox. I can't be able to copy the text into Google Translate box. I tried to use IE and that worked. I hope that you guys can test on your side to see if it works for you?

  I also tried with Disable Adblock Plus, but that did not help.

  
  

• Windows XP Professional Setup copy iaStor.sys then the OS says that it cannot copy the file iaStor.sys.

  After the RAID 0 disk partitioning, installing Windows says it will copy the files in the file system. The first file is iaStor.sys. My SATA CD drive runs for a few seconds, then there is a long pause, then the OS says that it cannot copy the file iaStor.sys. He goes on to say that I should check that there is a CD in the drive. Any ideas?

  Here's the solution to this problem:

  1. in the disk driver (a:\) root directory create a directory called holiday of $ $OEM existing files as they are, we will not delete or replace anything.

  2. in the directory $ $OEM you have created, create another directory called TEXTMODE

  3. copy all the driver files located in the root directory to the A:\$OEM$\TEXTMODE subdirectory, try to reinstall, it should now work.

• I get an error "Setup cannot copy the file els.dll" during the installation of Service Pack 3.

  The installation fails every time with this error. I can see and select the file in the temp folder, but it won't work. Any help would be appreciated. '

  Original title: 'Setup cannot copy the file els.dll' during the upgrade to Windows XP SP2 to SP3.

  In fact, I corrected it an hour ago and was meaning that close the message. I cleaned with CCleaner temporary files, downloaded the SP3 Installer on its own (no windows update) and disabled the antivirus. I was able to complete the installation.

  Thanks for the reply!

• I am trying to format my PC and when the installer loads of my key USB Kingston, he said: Setup cannot copy the file XPtspCom.inf.

  Setup cannot copy the file XPtsp Com.inf

  Hi all!
  I try to format my PC and what configuration is loading my Kingston USB key, said he: Setup cannot copy the file XPtspCom.inf.

  I use Windows XP Professional Edition SP3.
  How do slove this problem please to continue to work with my PC?
  Thanks in advance!

  You should not use these programs, but if you want a USB key to install then you should make an ISO file and then using Unebootin according to me this is a best software to USB for xp and if you have windows 7 installed in one of your system, then you can use tool usb windows 7.

• Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

  Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest you register the Msado15.dll file required.

  a. Click Start and then click Run.
  b. in the run dialog box, type the following commands in the Open box and then click OK.

  Regsvr32.exe ">"

  The> placeholder is the absolute path of the file Msado15.dll.

  The following examples show how you can specify an absolute path:

  Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
  
  If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

  DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
  c. click OK.

  Method 3
  I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 4
  I would say that you can download and install the update to the clean boot from Microsoft download center.

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

• Error: "Setup cannot copy the NTLDR file" installation of SP3

  original title: try to day XP Professional SP2 to SP3, but a 'copy' error "Setup cannot copy the file NTLDR.

  Try to XP Professional Service Pack 2 update for... SP3, with "The Wizard software update Installation" through "automatic Microsoft updates.
  Everything is going very well until a "Copy error" window saying:
  "Setup cannot copy the file ntldr.
  It gives 3 options
  1: "Retry" (does not work)
  2nd: 'Cancel' ('do you want continue Setup without copying this file?' by clicking 'Yes' gives 'Warning', "" If you cancel copying this file Windows might not work correctly. "") "Are you sure?) and
  3rd: "Browse..." So I just restart and... "The installer was interrupted..." Restore the previous configuration... "And here I am with sp3 refuses to read its own files!
  Any suggestions?
  Thank you

  PS. : Before installation I disable the Avast! Anti-virus service. No daemon or alcohol 120% installed.
  No other problem except when I try to update to the latest ATI AGP adapter CCC (catalist control center) I got a "failed to install".

  Information on the machine:

  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.100216 - 1441)
  Language: English

  System manufacturer: Dell Computer Corporation
  System model: OptiPlex gx270s
  BIOS: Phoenix ROM BIOS MORE Version 1.10 A06
  Processor: Intel (r) Pentium (r) 4 CPU 2.60 GHz (2 CPUs)
  Memory: 1022MB RAM
  FG 0, 015 M/b: Dell Computer Corp.
  Chipset: Intel i865PE
  NorthBridge: Intel i865PE
  SouthBridge: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge Disk Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) EIDE
  HARD drive: Maxtor 6E040L0
  AGP: ATI Radeon HD 2400 Series

  You can trust in the security of any computer used until you have formatted the hard drive & then did a clean install of Windows.

  Note: The free version McAfee to test which is preinstalled on the computer is now permanently disabled .

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to return the computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Setup cannot copy the c_20936.nl file during the installation of additional languages

  original title: Setup cannot copy the file c_20936.nl

   

  I have windows xp sp3 and try to install additional languages, East Asian and I get this error on copy. "Setup cannot copy the file c_20936.nl. Make sure that the disk in the Windows XP Professional CD is in the drive selected below, or provide the location where the file is located. "Copy the files: D:\j386. Need help, what can I do, I have the correct cd in the cd drive, but I get the error of copying.

  Hello

  Step 1:

  I suggest that you try to copy the folder i368 on the computer, and then try to install it from there and check if it installs.

  Step 2:

  Follow the steps mentioned below.

  a. Click Start and then click Control Panel.

  b. double-click regional and Language Options.

  c. click on the languages tab, click details and then click Add.

  d. under input language, add the language that you want to use.

  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.

  Check the links below.

  List of languages supported in Windows 2000, Windows XP and Windows Server 2003

  http://support.Microsoft.com/kb/292246

  How to add and enable additional languages in Windows

  http://support.Microsoft.com/kb/177561

  Download languages for Windows

  http://Windows.Microsoft.com/en-us/Windows/downloads/languages-XP

• With pellets W510, how can we simulate a right-click of the mouse to 'copy' the text?

  Were you successful in highlighting a text in the Tablet, but having to use the application 'menu' to 'copy' the text, and then "Paste"? I found it is not easy with a Tablet and messy. Were you able to highlight text, and then simulate a right mouse button pressure and don't use DO NOT the menu function to 'copy' and 'paste' your text desired? If you did that, then I would like to hear from you! Kindly tell me how you did it. In case I don't come here very soon, U could please send a copy of your response to: [under the direction of privacy] Thank you!

  Of course, it's easy! Just hold the touch for a few seconds until you see a finger of yor box surround. When you release the button, it will give you the context menu.

• Copy the text from the online site created by muse

  Hey,.

  People can not copy the text of some sites created by Muse?

  Is it because I chose the wrong police at my site?

  Best regards and thank you

  Tom

  In addition, you use system fonts?

  System fonts allow you to use the typography more unique, based on specific fonts (the Designer) have installed on your machine. For example, if you design a site that has a specific theme, such as a gardening site, you can install a unusual flower font that is not available in the web fonts Typekit library. It's good to apply sparingly system to the text fonts, but keep in mind that the text content will export as images. This means that the page takes longer to load and visitors will not be able to select, copy, or paste the text of the page. System fonts are also better suited for small pieces of text, such as headers. To make the site easy to use, avoid using fonts system for addresses, phone numbers and any content visitors can copy and paste in a calendar or e-mail message. Don't forget that some visitors have difficulty reading the text smaller and can set the browser to increase the size of the police; but this strategy won't help to read the text that is exported as image files. Remember that the search engines index text content search sites to define a site's ranking in search results. For these reasons, it is best to only apply the system fonts when you really need have an impact on the design. If there is a comparable web or Standard police, apply this police instead.

• How to fix a packaging error - "cannot copy the linked files?

  I use a file that I used previously to a directory.  I rename to use the layout, but use all of the new images, etc.  It shows all links are good in the document, but when I go to package, I get the message that it cannot copy the related files.  I have InDesign CC 2014 and OS X El Capitan.  Any ideas on a fix?

  Looking for special characters in link names. I think that only dashes and underscores (maybe a few others) are allowed in file names. Also look for foreign language characters.

• Copy the text of the line of the cursor line

  Hi all

  I need to copy the texts of the clicked cursor line. I tried the code below, but does not. Please help for this.

  Kur = new Array;

  myDoc = app.activeDocument;

  var salt = app.selection[0].lines[0].contents;//but the alert works very well

  Alert (salt)

  Kur.push (salt);

  App.Copy (Kur);

  App.Paste (kur); done only the text in the selection

  Cursor blinked this line:

  

  Select the line and copy and paste the separate framework:

  

  Hi Selva,

  If you have a single insertion point selected, you can use this code:

  app.select(app.selection[0].lines[0]);
  app.copy();
  app.selection = null;
  app.paste();
  

  Uwe