Skype never goes to offline mode

Similar Questions

• Printer GOES into offline mode

  I'm on a Mac Book Pro... Recently my HP Officejet J6400 continues to go offline.  I have a print job, and then it disconnects when I send the following.   Until I have re-boot Richard

  Let's start by resetting the printing system

  -Sys Prefs, print Fa
  -Right (control) click inside the box that lists your printers and select Reset Printing System
  WARNING - This will remove ALL your printers
  -Select the sign + to add again. Search for the printer, select it, and wait for the theAd element button becomes available. Click it

  Now let's define a printer IP address

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer
  -Type the IP address into a browser to reveal the internal settings of the printer
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Your should be 10.0.1.2 a.200.  Let's define 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Monitor goes into Sleep Mode immediately after the connection to the motherboard

  Hi all

  My problem is like this.

  I have a desktop crt monitor. When I give power to it without plugging it into the motherboard, it's showing a message 'no signal' all the time and never goes to sleep mode.

  But when I connect it to the motherboard, the monitor goes into sleep mode immediately. When I delete the connection of motherboard once again, it's back mode 'sleep' and saying 'no signal 'again.

  Any other monitor works well with this office properly.

  This same thing happens when I am trying to connect this monitor to my laptop as an external display device.

  What could be the problem?

  Kind regards

  James

  Hi Ty,.

  I suggest that you check the manual of the monitor to check the frequency of the monitor support.

  It seems that the monitor is defective because the other monitor works fine.

• my notebook, ProBook 450 G2 go goes into sleep mode when well even parameters of energy set to never.

  My notebook, ProBook 450 G2 goes into sleep mode when well even parameters of energy set to never. The operating system is Windows 7 Professional.  I had a technician Microsoft verifiez_ the. I also had HP tech check the. They both said that it was a hardware problem. I sent it to HP to fix it and they replaced the motherboard and said that they have tested. When I came back, it entered into mode 'sleep' again. I left my laptop for about 15 minutes and when I came back it was in mode 'sleep'. This always occurs after the laptop remained for about 15 minutes.

  Does anyone have a solution?

  I sent my laptop repair HP. They replaced some cables and motherboard, but it does not solve the problem. They finally replaced the Windows 7 operating system. Basically they gave me a new system. I spent 3 days to update windows with all the updates and then re-loading of my programs. What a mess!

• management system is again in offline mode

  Hi, so, Ive had my readynas system for a little more than two months now and im still the problem I sent the papers a few times to try to solve, but no suggestion seems to remedy.

  about every day or alternated the management system is in offline mode. While its in this mode I can access just like usual locally and at least I look specifically at the unit or raidr is open, I have no idea it's his same crushed. 9/10 times after ive restarted one of the discs degrades and begins to synchronize. I never find her in this mode when I try to access the readycloud and the readynas shows offline and I can't access that either remotely, which is a huge convenience as Ive now had to start copying the files I might need my drive to icloud so I can access them at work that goes against the point of this system.

  I would point out that I use digital red West which are on the comptabiles lists all were new when I bought and logs for the hard disk has no errors

  I've updated to the latest beta before 6.5 is released as an admin has said that I should because it would fix the other problems I had and since then the actuall firmware was released that I installed

  IM pretty good at the end of the test and is considering sending the unit back. and goes with another manufacturer alltogether I got this nas to make my life easier and its been nothing but a headache. IM constantly having problems with it I'm not a computer expert and it looks clean which one you must be.

  I sent my logs earlier, I hope that we can settle this once and for all.

  Thank you very much

  Your logs show that your system is OOMing. Plex is using a lot of memory. You can contact technical support as proposed by StephenB.

  It seems that you have two different versions of installed Plex.

• When I click on my "minimize icon, I started in offline mode. Any suggestions?

  From today, just when I reduce my screen that I am immediately taken offline.  Never had a problem before. I tried right click and restore the icon reduce, but still am started in offline mode when I reduce.

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Defining what songs will be available in offline mode after joining apple music

  Hello

  I have an itunes library that contains 20 GB of songs. I used to sync my library of music manually on my iphone so my iphone contained 14 GB of music.

  Now I joined apple music and all downloaded itunes my music library in the library of music to icloud and all songs appear on my iphone. The songs I used to sync with my iphone has a "local version" and the songs that I chose to not synchronize with the iphone are appearing as a 'cloud' with the symbol cloude version so that they not use my iphone storage.

  All of this is great. But - that's the problem: now, when I connect my iphone to my computer and enter in the music sync iphone settings, I can't change like before sync settings because I use the music to icloud service.

  Now what can I do if I want to change my songs will be available in offline mode (and use my iphone storage) and what songs will be available in their version of cloud? The only way I've found that I am able to do is to choose one song from the library on my iphone and press 'delete '. Then he turned to the version of cloud. But I have thousands of songs! I need to free up space on my iphone and its driving me crazy that I can't control accully of music that is on my iphone.

  Based on the iOS 9 (I have no iOS 10 in front of me)...

  On the device ' settings app > general > storage management > music '. You can select artists to remove or navigate to Albums & songs.

  I think that iOS 10 has also an option to delete in-app music...

  http://www.McElhearn.com/the-hidden-delete-song-button-in-the-iOS-10-music-app/

  I don't know what will happen if you re-sync with iTunes, it's probably going to copy any return, so you will need change the settings for synchronization if you always connect to iTunes.

• Can I sync the calendar in offline mode?

  I have setup a personal CalDAV server at home. With Firefox OS (v1.1), I added the external calendar successfully and I can create and edit (does not however remove, but who don't mind) events without problem. Obviously, this works only while I'm connected to my local network. What I want to do is to add events to the calendar in offline mode and when I get, synchronize all these events to caldav calendar. Is there a way to do this?

  Hi lufte.

  This feature is not available in the current version of Firefox OS.

  You can suggest new features and provide feedback to Firefox OS by going to settings > Improve Firefox OS > send feedback from Mozilla. Our defence experts review all comments that will help with new features and map future versions of the device.

  In the meantime, I created a ticket in bugzilla so that our engineers can start to investigate:

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=1023061

  Please let us know if you have any other questions.

  Thank you

  -Ralph

• HP 8620: Printer in offline mode when the computer starts

  My 8620 Officejet is offline.  It is connected via a cable to my 360 spectrum HP network.  When I turned off the computer and start that he even once, the printer starts in offline mode - for example, when I got to print from Microsoft Word (Office Pro 2016), the printer is 'offline' in the Word print dialog and I get a message from Windows system, saying printer offline - and nothing prints.

  I can solve it with the help of HP print and Scan doctor.  But if I closed the computer and start it up again, it is new offline.

  I can fix this by going to the printer by pressing the button on the front power off and then restarting it - the document in the print queue print immediately.

  Also, if I start the Server Web part, select 'Tools' and then click 'Print a self Test Page', the page prints as usual. However, if I then go back to Microsoft Word, the printer remains offline.

  HP Printer Wizard starts well and the analysis of function of Document or Photo works very well.

  It's just the feeling that is not.

  Any ideas gratefully received.

  Thank you
  Philippe

  Hi @Philip4,

  Welcome to the HP Forums!

  I noticed that your HP Officejet Pro 8620 keeps going offline. I'm happy to help you!

  Please, try the steps in this guide, "offline" Status Message printer (Windows 10), as well as this guide, the printer is not maintaining the wireless connection.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these guides help!

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• Webcam can not take pictures in offline mode

  I have a webcam built in on my laptop, a lifecam software, but I can't take pictures in offline mode. It always tells me to connect to a camera. Any ideas?

  The webcam is not a lifecam. This is why it does not. The lifecam program (I think) is reserved for the lifecam cameras. What is the brand / model of the laptop? You need to maybe go to some site and see if there is a program for that. It'll probably work in Skype or something

  If you want (if you're on Skype), add me (my name is the name that I use here). We'll see if it works

• computer starts to work in offline mode if unused for more than 15 minutes

  computer starts to work in offline mode if unused for more than 15 minutes

  Hi aunt sandy.
   
  1. do you have security software installed on the computer?
  2. are you able to browse Internet?
  3. do you see the error message on Internet Explorer?
  4. from when are you facing this problem?
  5. any recent change in software/hardware on your computer?
  6. what exactly he is referring to when he says "computer will work offline.

  If the problem happen with Internet explorer, and then try the suggestions below.
   
  Method 1:
   
  Step 1: Start your computer in safe mode with network and verify that the question.
   
  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
   
  Step 2: If the problem does not happen then, I suggest you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  7 How to solve a problem by performing a boot in Windows Vista or in Windows
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
   
  Method 2:
   
  Step 1: Try the following steps to solve the problem.
   
  a. open Internet Explorer, click the file menu and check if the 'work offline' is selected. If Yes, then click on 'Work offline' to deselect.
  b. Click Start, type inetcpl.cpl and then press ENTER.
  c. click the Connections tab and make sure "never establish a connection" is selected.
   
  Step 2: Reset Internet Explorer settings:
   
  To determine whether a performance issue or an error message is caused by configuration settings, restore its default configuration of Internet Explorer. It was his condition when Windows Vista was installed initially.
   
  To reset Internet Explorer settings automatically, click the fix it button or link in the article. Click on run in the file download dialog box and follow the steps described in the fix it Wizard.
   
  See the article below which holds detailed information step by step to optimize the IE.
  http://support.Microsoft.com/default.aspx/KB/936213
   
  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Monitor goes into sleep mode during the installation of Windows 7

  Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!

  Hi Danpedro,

  I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have an external display driver card attached to the motherboard?

  3. you format the hard disk during Windows 7 installation?

  Method 1.

  Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.

  Method 2.

  If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Disable offline mode?

  Hello. My name is Simon and I use history and it's awesome apart from a major drawback, that I can't move.

  Whenever a computer starts accidentally Story in off-line mode, it syncs with the off-line of the document version once going online and working days are lost. It may not yet be reinstated in history.

  Its happened four times now and I get a little tired there so I think to disable the offline altogether. Is this possible? It would salve the problem as none of us work in off-line anyway.

  Thank you for your time.

  Simon

  Sorry, but for now, it is not possible to turn off offline mode in the desktop application.

  If you still prefer to work online so maybe working in the web app (https://story.adobe.com) would be a good option.