Skype number rings only when the application is open

Similar Questions

• Skype rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when having a Skype number?

  I reset my phone to factory settings and it works now.

• Prevent the PlayBook goes into mode standby when the application is open

  What is the code needed to prevent the PlayBook mode 'sleep' when the application is active?

  Maybe this can help: https://github.com/blackberry/WebWorks-Community-APIs/tree/master/Tablet/sleep

• background page will stop automatically when the application is open.

  I have a Blackberry application that have a background process, and it works very well when you install an application, but when you later open this app and then close, its background process stops. I think I'm just missing something small, or something wrong. My current thoughts, but I do not find anything related information so far: * to do something in index.html (resumeBackground?)

  Hello joygupta,

  If you want that your application is still running on the background, you must manage how your application exits through the blackberry.app.event.onExit by asking your app to go inside instead of shut down.

  Here's a little code to do this:

  blackberry.app.event.onExit(onExitCallback);
  
  function onExitCallback() {
    blackberry.app.requestBackground();
  }
  

  This would cause your application to run in the background when the user "comes out" of your application and then reminds the blackberry.app.requestForeground event () once you click on the new icon.

  I hope this helps.

• Local HTML storage when the application is closed

  Hello

  I would like to know if the local storage of a html page included in an application will be saved only when the application is closed, or the machine to stop.

  Yet, I use Adobe Viewer v30 for the test on an iPad and local storage is lost when I left Adobe's Viewer.

  Thank you very much.

  Yes, he does. Using localStorage.getItem () and localStorage.setItem (), Yes? We used recently for a game of treasure hunt in our publication to record what elements have been found in different articles of the folio. He worked in the LCA for us on the iPad, but also our custom application.

• event listener for when the Panel is open?

  is there an event listener for when a CEP Panel is open.

  I have a persistent Panel the onload works only when the Panel is opened for the first time. I want to keep persistent, but I want to know when the Panel is open again

  Maybe I've misunderstood something, because my English is bad. Unfortunately the listener for events at the opening of the Panel, I also have not found, I had to go through the back door.

• Why a normal digital text read like a phone number on my site only when the display on the phone or Tablet?

  Hey everybody.

  I'm working on a website and have an ABN followed of the digital text however it does not read as text on a phone or a tablet. In fact, numbers are invisible and when you click it then numbers and calling area is triggered.

  How can I fix this please.

  Help.

  Double post of why a normal digital text reads like a phone number on my site only when the display on the phone or Tablet?

• When the application is removed

  Hello

  How will I know when the application is removed

  make a wish of application registry in are on start .i want to cancel the phone from the server on the uninstall.

  In addition to a second request for guard dog, the only approach I am aware to do this was the CodeModuleListener added in OS 5.0.  Take a look at this and search the forum for other users who have tried it.  I'm not sure it works as well as we would like.

• Show LOV only when the field is empty

  Hi all
  My surroundings:
  Oracle 10g on Windows
  Forms [32 bit] Version 9.0.4.1.0 (Production)
  Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Oracle Toolkit Version 9.0.4.1.0 (Production)
  PL/SQL Version 9.0.1.5.1 (Production)
  
  My problem:
  I have a field in a block, which is text_item and is linked to an element of LOV. I want the LOV appears automatically, whenever I tab in there, only when the element is EMPTY (for example when I try to insert in the block). When, upon request, it should show only the value in the field, and user can choose to activate the LOV, by pressing F9, if she wants to. It now displays automatically each time text agenda is a debate (works very well when the user is inserted, but annoying when she questioned the shape and trying to tab thru.) Every time she focuses on the field, LOV is popping up!)
  
  The current setting for the property on the element of text field: Type: text element
  The list of values: MY_LOV_NAME
  Validation of list: Yes
  
  Properties on MY_LOV_NAME
  Auto display: Yes
  
  Any suggestions? Or trigger level I can use, and if so, what build_in can use?
  New forms and will greatly appreciate advice from pros!
  
  Thank you
  Libran_girl

  It's very simple,

  IN once - new - item - Instance

  DECLARE
  V_LOV BOOLEAN;
  BEGIN
  IF: NOM_ELEMENT IS NULL
  THEN
  V_LOV = SHOW_LOV (LOV_NAME);
  END IF;
  END;

  Try it, you will get your result, if it doesn't work, try: block_name.item_name

  Abbas

• Display shuts off and comes back only when the Satellite A210 is restarted

  Hello

  Satellite A210 display goes off in time and returns only when the computer is restarted.
  Duration usual DURATION 30 or 45 minutes

  Please advice
  # Is it a hardware or software problem?
  # Some other face same problem brings advice?

  The machine is a year and a half old runs windows vista Basic that comes with it.

  I reinstalled the drivers card display also the problem remains same

  Hello

  Have you tried an external monitor on the laptop?
  If the external monitor works fine, it seems to be a problem of internal display and must be replaced.

  You use the factory settings on your laptop computer or you have installed your own version of Windows? Before turning to an authorized service provider, you need to restore factory settings to determine if it s a hardware or software problem. With the factory settings, everything should work fine and if not, I think it s a hardware problem.

  Check this box!

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• toggle is plotted on a graph when the application is running

  Hello

  I'm trying to figure out how to make a graph that allows the user to select which elements are drawn when the application runs.  I want all data to appear on the same graph with the same x and axis of ordinates and maybe some checked boxes or something to allow easily what items are displayed.

  Thank you

  Gary

  1... don't use two nodes in separate property for the PLOT VISIBLE and Act implementation CHART.  If you do that, you don't know who runs first, - they are independent.  Use a single property node (stretch it to include two properties).  The top property must be ACTPLOT, 2nd one, be VISIBLE TRACE.  In this way, it is guaranteed to run in the order you need.

  2 you are the cluster of box check ONCE at the beginning of the program of reading and using the same value each time.  You want to read the cluster when the CHANGE occurs, EVENT that is, in the case of the EVENT.  You can read the terminal, or read the NEW VALUE property for the event, so be it is OK.  But you have to read the new value, not the old one.

  3... you also read your buttons ONCE at the beginning of the program, and re - trace the same value whenever you draw. You need to know when you need to draw and THEN read them and lead the chart.

  4... If you set the timeout to, say, 100 mSec, in the TIMEOUT case, read the buttons and drive the graph, then you will have a living picture that updates approximately every 100 milliseconds.  Implement #1 and #2, and you can turn on and outside plots.

  I say "Roughly" because of the way the timeout works - if you wait 99 mSec and then click on a checkbox, the wins Manager check box and the timer 100mSec STARTS OVER when you get to the next iteration.

  If you want the table to day exactly every 100 msec and then use time separate loop, with a WAIT TIL NEXT MSEC MULTIPLE.  Do the waiting, read buttons, drive chart and repeat.  A separate loop will not be disturbed by events in the loop of the user interface.

• How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

  Hello

  I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

  Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

  Concerning

  Jamal

  I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

• FM Radio has its out only when the screen of the phone is turned off

  FM Radio has its out only when the phone screen is turned off. Even for the speakers or headphones.

  I SOLVED!
  I had turned on 'Ok Google' and set it listening to "from any screen. Looks like Google to try and listen to all the time and blocks Radio FM output for headphones and speakers