Prevent the PlayBook goes into mode standby when the application is open

Similar Questions

• Laptop goes into mode 'sleep', when I close the lid.

  I use a screen with my laptop but when I close the lid of my laptop go in mode sleep.  I tried to change the power settings, but it does not allow me to do.  How can I change the settings so that when I close the lid it stays on?  Thank you.

  Follow the steps on:

  http://Windows.Microsoft.com/en-us/Windows7/change-what-happens-when-you-close-your-laptop

• I have problems connecting to the House. Online (IE), after that my computer goes into mode 'sleep', when I wake it back my connection is lost.

  After awakening, when I still work online I get box to "Diagnose connection problems", click on it and I get three options.

  1. ' autmatcally get a new IP address for the network card. Connection to the local network

  2. a problem with your modem router or broadband network (suggest I unplug everything and then back on after 10 sec.) I did it.

  3 reset the network connection local network adapter. I did this and log back, it does not solve the problem.

  Hi Twindaddio,

  A. are you using a cable or a wireless connection?

  B. when it last work very well?

  C. What is the exact error message?

  Try this step in the meantime.

  1. click on Start.

  2 type devmgmt.msc in the start search box and press on enter.

  3. click right network adapter and click Properties.

  4 Select the power management tab, and uncheck the option to save energy.

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• computer randomly goes into mode 'sleep' when typing

  I have a new Acer Aspire 4820 t running windows 7 Home premium. I have a problem with the computer will randomly in mode 'sleep'. This seems to happen especially while I'm via remote desktop, although not entirely. The computer does not heat and I turned off "sleep" mode completely or at least thought I have.

  I can be typing at the moment then actually use the keyboard. Incidentally, this is the second computer, it happens that I sent the first back thinking it was a hardware problem.

  Any help would be appreciated

  Dear Mike,

  Try this by the solution of the box. It worked for me:

  Dear mn2rgorillaz,

  I am a computer repair technician, and suddenly one day I started having the same problem, 12/09/2011 in fact.  I tried everything, reboot the computer, the bios flashing, change all settings to never sleep and none of them worked.  I always had the same problem with my computer go to sleep in the middle of my typing, all random, of course, I could type a paragraph or a letter and PAF suddenly that he would go to sleep.  I was very frustrated, I sat for an hour and has thought of everything that had happened that day to try to understand what it might have been.  I didn't think the worst (bad mother).  It took me a little bit, but it finally hit me.  I bought this pretty new braclet that day, one of those magnetic which is supposed to help with arthritis and carpol tunnel syndrome.

  As a computer tech, I felt really good because as all of us in the field will tell you computers + magnet = cloudy.  I do not think that anything of it when I bought and had already forgotten that I was wearing it.  Bingo, it took off about 10 minutes ago and I was seized as a crazy for woman.  No problem what so ever.  Just thought I'd throw it out there in case you might just wear the said kind of braclet.

  -------------------------------------------------------------------------------------------------

  LARGE Leah, I think you nailed!

  My acer as3810T started with this mysterious behavior also and I have also updated the BIOS, update of office, ran several optimizers system, etc that does not.

  Now that you mentioned the magnets. I hurt my hand and my mother recommended to put a few small magnets the base of my thumb which should have the effect of acupuncture without needles.

  Now I type with one hand (the one with no magnets) and of course the PC never sleeps in the middle of the sentence.

  Great shot! That's what I call thinking out of the box! I'd never get one. Thank you so much for sharing your insight.

  Cheers from the Brazil

  George

• WSD Print device device driver prevents computer from going into standby mode

  WSD Print device device driver prevents computer from going into standby mode

  This message indicates that the computer was unable to fall asleep by a device driver.

  Look for the drivers updated printer manufacturers website or run the Microsoft Fixit:

  http://support.Microsoft.com/GP/printing_problems

• How can I prevent the password window open when I do not use a password

  How can I prevent the window from opening at startup password when I don't use the password system

  Look in the general tab of the preferences system - security & Privacy - and see if the box named disable auto login is enabled. In this case please uncheck it.

• Prevents the application to be modified after being approved

  Hi all
  
  Senario:
  
  Prerequisites:
  There is a resource configured on IOM A and it is available to ask
  The approval process requires two levels of approval: 1 the User Manager and the 2nd the authorization object
  
  Manager1 is the Manager of User1
  Authorizer1 is the purpose of the authorization for resource A
  
  
  1 - User1 initiates a request access to resource A to itself.
  2 - User1 must enter information before submitting the request and we denunciations considers the level of access to his account on resources. He chooses the level of 'single user '.
  3 - Manager1 receives an approval task and approves it.
  4 - Authorizer1 receives a task approval, but, for some reason, takes any action. (It is not in the office today)
  5 - User1 goes back to the request and replaces its access level 'admin '.
  6 - Authorizer1 comes back the next day and approves the request.
  
  Problem: Only approved Manager1 because at the time he checked demand the access level is set to 'single user '. He would not grant admin access level.
  
  Questions (options):
  (a) is it possible to prevent the application to be modified after being approved by Manager1?
  or
  (b) is it possible to send the application for approval to Manager1 if there was no change once it has been approved?
  
  Thanks for an overview.
  Adriano.

  There are several solutions to this. See below:

  - Either remove editing permissions for ALL_USERS of the shape of the object. If your end user would not be able to update the details of the application once it is submitted. In case the desire of the user to change the data, then it can send an email to manager to do. But the end user cannot do itself. See tab the form designer to apply permissions to objects of. It must have an entry for ALL_USERS. It is an immediate solution to your question with 0 effort.

  - Or if you specifically want that after approval only, the form data should not be updated. Then create an adapter of the entity that verifies whether or not the request is currently underway with the Manager. If this request is not with the Manager then this entity adapter throws an error shows that the application has been approved by the Manager, so it can not be changed. This would require changes as follows.

  a. you must include 2 additional fields hidden in your application form which contains the requestId and UserID. Once the end user submitted the application, you must assign this form requestID requestId field generated at the time and the other IOM userID field. You can do this with a task in the approval process by using the API of IOM.

  b. now create this map of the entity. It will have 2 variable reqId and userID. You get these attributes and IOM API check is pending with the Manager of the user request. This adapter returns true or false. False, add an error handler task.

  c. attach this adapter on the event before update of your form in the object data manager.

  Now if after approval of level 1, the final user tries to update the form, it displays an error in the format of the IOM ' as the request was approved by the Manager, so it is not editable '

  This should solve your problem.

  Thank you

  Sunny

• Skype rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when having a Skype number?

  I reset my phone to factory settings and it works now.

• Skype number rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when with a Skype number?

  (Previously posted this in the Android subforum)

  I reset my phone to factory settings and it works now.

• In the 30 days trial Lightroom, the application is opening her self, how can I stop this?

  In the 30 days trial Lightroom, the application is opening what it self and showing the import screen image. The app and the cathalog that is installed on the C: drive, but the photo files are on the disk D:. How can PLS, I stop this?

  Hi sstamant,

  Could you please let me know when the Lightroom Application opens by itself?

  You connect any external drive?

  Kind regards

  Tanuj

• Updated several CC applications last week now none of the applications update opens. I get a message that MSVCR110.dll is missing. Can I get a U44M1P7 error code.

  Updated several CC applications last week now none of the applications update opens. I get a message that MSVCR110.dll is missing. Can I get a U44M1P7 error code. Any ideas?

  Missing DLL https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html can help

  or full Win10 DURATION https://www.microsoft.com/en-au/download/confirmation.aspx?id=30679

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• Lose my ethernet internet connection when the computer goes into mode 'sleep '.

  I have a desktop with Windows Vista.  I have my internet through a cable company.  I've never had problems of connectivity for 2 years and then out of no where he would pass the signal after mode 'sleep'.  I had the cable company come out and check on all equipment and it's good that now, I'm still clueless and confused.  The connection icon have an exclamation point in a yellow triangle and say "limited connectivity" and «identify...» "and then I click on Local area connection status and make a diagnostic test that will get me connected to"network 2 "until it goes into sleep mode and then the process repeats.  It's boring say the least.  When I login and go to the LAKE State he says;

  IPv4 connectivity: Internet

  IPv6 connectivity: limited

  Media state: enabled

  Duration:

  Speed: 100.0 Mbps

  He said that the issue is resolved after each diagnostic test, but then it happens again.  I need some help pleaseeee!

  > I need some help pleaseeee!

  But you're in the wrong group! It is a problem with your network driver
  or your Windows installation. You have this repost to a suitable for Windows Vista
  Forum. It is possible that a newer driver from the network has a problem with sleep
  mode, you should try another pilot (older or newer).
  From your description, there is a problem to renew the lease of your
  DHCP server (which must be running on your router), it does not use the
  IP address assigned earlier or he does not do / IP address (which
  should be the same) we get the router. It is also possible that the
  problem is with the router or a new firmware on this subject. You should study
  These two avenues, including a replacement of the router and firmware.
  Another very simple solution is to configure your PC for a static IP number and
  leave it like that. In the forum, I mentioned, people will be able to talk to you
  through this option if you don't know how to do this.

  --
  Kai

  IEFAQ: http://iefaq.info Newsgroup: microsoft.public.de.internetexplorer

• Windows switches mode standby when you connect

  Old desktop computer goes into sleep mode when someone is trying to connect.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  I also suggest you to optimize Windows XP for better performance and check if that helps:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Computer always goes into mode 'sleep' even if I chose to never sleep

  Original title: the power settings

  When I go into power settings and put the computer to sleep, I choose NEVER.  The reason why I have some backups that take a long time.  However my computer always goes into the mode after a certain time. I've been through this several times.  How can I fix it? Thank you

  Hello

  Make sure that you are logged as an ADMINISTRATOR to make changes to the power (sleep) or others.

  Are you sure that you have those established in all Power Options? (There may be more than one).

  Check the change Plan settings - change advanced power settings

  Check the change when the computer sleeps

  Is - that go to sleep or is the active screen saver?

  Right click on the Desktop - Customize - screen saver.

  ==================================

  These might help:

  Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
  http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

  How to solve a problem of Standby Mode Vista and find a Solution - also applies to Windows 7
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  Sometimes reset power Plans to default values help and then put them as needed.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to manage Hibernate Mode in Windows 7
  http://www.howtogeek.com/HOWTO/7564/how-to-manage-Hibernate-mode-in-Windows-7/

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  How to restore the default settings of the power Plan in Windows 7
  http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

  How to change the power Plan settings in Windows 7
  http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

  How do I change the sleep settings in Windows 7
  http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• T500 wakes up automatically mode standby when on feeding

  Just got a new T500 and installed Windows Vista Business x 64 and all updates from Lenovo and MS. everything works fine except one small thing:

  When I put the computer in standby mode och put into hibernation, he stayed there for a few minutes and then he wakes up automatically again. Then back to mode standby/Hibernation again. Then he continues in a loop this way.

  I noticed this happends only on the current.

  Nothing about it in the Windows event log. I've changed almost every setting in the BIOS but without success...

  Any idea?

  Found the answer here:
  http://communities.VMware.com/thread/197962

  It was 'VMWare vCenter Converter standalone 4"that was causing the problem. I uninstalled it and wake up without supervision problem has disappeared.