Skype works is not due to the incompatible application

Similar Questions

• Effects of text doesn't work is not due to the length of the slide

  Hello

  I have a 5 legends that have a start on them. (just a zoom faded in)

  I have 5 buttons each with the relevant text caption.  I wish that the slide to pause while the user presses each button in turn to reveal the text captions.  However, only the first work because the blade stops.

  I can however have no effect of entry and just have text captions appear on click of a button, but I liked the effect of opening 'animation' and you want only it on each of them.

  This will have to be created in Flash and imported or can I replicate in Captivate 6?

  See you soon

  Julie

  I see the problem... I think that only apply you a time based on the text captions, would see the chronology.

  But you must apply the effect by a tip action, which is a bit tricky. Take a look at this blog post, first example (those are not faded zoom effects, but the principle is the same):

  http://blog.lilybiri.com/reset-effects

  Is this something like that?

• defrag and chkdsk __will works is not due to a disk volume error__

  Hello. Windows xp home edition. Defrag works is not due to an error of volume and chkdsk is scheduled, but does not. restore only has a point in there for some reason any and tried, but will not fix the problem. ran chkdsk only, would not end because of the mistake of volume. How can I correct the mistake of volume and the chkdsk to run with restart and defragmentation without restore complete system.

  Hello

  Try running chkdsk from the recovery console and then try to make the disk fragmentation.

  Note: /r locates bad sectors and recovers readable information. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  a. Insert the Windows XP CD-ROM in the CD-ROM drive and restart the computer.

  Note: Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.

  b. when the "Welcome" screen appears, press R to start the Recovery Console.

  Note: If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.

  c. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.

  d. at the Recovery Console prompt, type the following command, and then press ENTER:

  Chkdsk /r drive

  e. allow it to run intact until the completion (45 min or more)

  f. report any error

  Take a look at CHKDSK in this article.  http://support.Microsoft.com/kb/314058

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• According to the journal of DDPE encryption starting not due to the fact that the the TPM Base Services (TBS) secure is not started

  Basic services of the title: original TMP (TBS)

  I'm running Windows 7 x 64 SP1 Enterprise Edition.  We use DDPE to manage BitLocker.  Laptops are not encrypted.  According to the journal of DDPE encryption starting not due to the fact that the the TPM Base Services (TBS) secure is not started.  Open services.msc and realized that TBS was not even as a service.  Research on TBS and found it's relies on the file "tbssvc.dll.  This file is not anywhere on my PC, (should be in Windows\System32).  I hope someone can help me with the following questions.  I'M assuming that TBS is a Windows service?  He would appear in a standard installation? Windows Update?  If it is standard, and it does not install, is there a way to reinstall the service?  I found a link on the Dell site that got copy tbssvc.dll from a work computer, paste it to a computer for non-working, create new registry keys and register the dll from the registry.  It works, but I prefer not to go down this rabbit hole if there is a simpler solution.  Thanks for your help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Questions CHAPTER: classname does not exist in the current application package

  CHAP, I integrated it into my application.  When you put a file in my media with the specific file extension (.xyz) map and by clicking on it, my application successfully is started and managed as expected.  That's the good news.

  However, I tried to create a separate application to test the app-to-app content handling (so that other applications can call my request).  In the application, I create my file (extension .xyz) on the handset and then try to claim it.  However, when I try and call it, I get an IllegalArgumentException saying: classname does nto exist in the package of the current application.  I checked that my main application has seen that full classname with package (com.test.ui.MainApp) and that my separate application tries to make the invocation with this same classname.  He worked successfully on the BlackBerry Simulator (4.6 Simulator "BOLD"), but it throws the error above on my actual handset ("BOLD", 4.6.0.167)

  Anyone have an idea what could cause this problem?

  Please refer to the following.

  Support - Classname does not exist in the current application package
  Article number: DB-00751

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800429/support...

• Perl not defined to the Oracle Applications environment. (Libraries T2K not in INC.

  Hello
  
  Am getting the following error when applying patches autoconfig.
  
  $FND_TOP/patch/115/bin/txkprepatchcheck.pl
  Perl not defined to the Oracle Applications environment. (Libraries not in the INCLUSION list T2K)
  Make sure that automatic configuration was performed and found a source correctly your environment.
  /U01/tech/appl/FND/11.5.0/patch/115/bin/txkprepatchcheck.pl line 131.
  BEGIN failed--compilation missed the line 141 /u01/tech/appl/fnd/11.5.0/patch/115/bin/txkprepatchcheck.pl

  Fine.

  (1) source the environment file
  (2) make sure that 'APPLRGF' variable is set in the environment. If this isn't the case, set it to the same value as "APPLTMP".
  (3) in the place where this patch was unzipped, patch_top/patchnumber/fnd/patch/115/bin.

  Run the utility as follows:

  Platform command line

  UNIX or Linux (must be a single line)
  ./txkprepatchcheck.pl-script = ValidateRollup-outfile = $APPLTMP/txkValidateRollup.html - appspass =

  do not FND_TOP/patch/115/bin

• Skype works do not after Windows update Setup

  Original title: you broke all my messengers with DEP.

  That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
  I thought about this once, of course, I'll do the update and now my Skype will not work.
  I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
  How to operate? It is extremely important that I make it work again soon.

  -Edit-
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  Original title: you broke all my messengers with DEP.

  That's why I never install updates - I'm tired of every time I do it, something in your update with my computer breaks. :/
  I thought about this once, of course, I'll do the update and now my Skype will not work.
  I entered in the system settings and click allow Skype.exe DEP but it always closes the program. Yes, I restarted too.
  How to operate? It is extremely important that I make it work again soon.

  -Edit-
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  Don't blame Windows updates.
  For all the world claiming fault from Windows updates, there are at least 2 who have had no problems with it.

  It's your computer. Somewhere, the parameters are wrong.

  As to...
  I even tried to disable with command prompt according to them here: http://www.vistax64.com/tutorials/120778-dep-enable-disable.html
  But I got "access denied."

  When you run the cmd, command prompt, you're supposed to do right click on cmd > click on Run As Administrator > then enter the command in cmd.
  They call this elevated command prompt.

  Did you do that?

• Unable to play the video due to the incompatible program and need to change the resolution

  Hi, I just bought BBC Get Active in French.  I live in France and I have Windows 8.1.  Video on this CD does not work, or not the speech, and he tells me that the program is incompatible. Having said that, also, I need to change the resolution of screen 1600 x 900, that only about 800 x 600 but when I do the screen becomes too small and the program returns to a large screen at 800 x 600.  He mentions the help of Vista or XP but as Windows 8.1 is more advanced I expect him to be just as compatible.  I changed the country of origin of the CD in the UK and hoped that that would solve the problem but no luck.

  Does anyone have a solution for me please?  I'm a child of 74 years, and not quite abreast with the technical jargon so its simplest form would be appreciated.

  Meg

  Original title: BBC GET INTO WINDOWS FRENCH INCOMPATIBILITY 8.1?

  Sunday,

  Hello again, just to make it count that I finally solved myself the problem by reinstalling QuickTime 6 in version 7, but I think the problem was to DO NOT to install it via the program itself, but to install itself as a separate installation, I think I read this somewhere in the course of my research, but at this point I could not remember which way I had installed it.  Hope this will help someone else in the future.

  Kind regards

  Meg

• Paragraph styles works does not properly on the table

  I placed a table created in Word, and then on the application of my paragraph styles.  However, not all my styles work fine.  Specifically my style of Description of the tool which includes a nested style.  The nested style does not follow the rules, given that it is.  The name of the tool should in Helvetica Neue Condensed Medium (in uppercase) while the next Description the en dash should be Helvetica Neue Light Condensed (normal caps).  On the contrary, it seems that the middle is applied randomly in the whole of the description.

  Also, when I apply my style request said I find myself with a lot of pink highlighted text implying that the police is missing when it is clearly not column.  This could be due to the recommended symbol?  Any advice on how to work around these issues?  See the picture below which shows the two questions.

  miz_nrg wrote:

  I do this in Word or CO-OPERATE?

  InDesign. You should be able to clear overrides from the paragraph Styles Panel menu.

  Check for character styles applied, you don't want to, also, if something is still wobbly.

• Mail works does not properly on the iPhone 6 more since the 9.3 upgrade

  It is an old bug in an older version of IOS, which seems to have returned.

  Basically the links in the emails no longer work. So URL will not activate safari. Have you tried many different emails, have shutdown and restarted the phone. Of course closed the mail application. Nothing gives. Yet, everything works well on my iPad pro, which also runs from 9.3.

  The full version is 9.3 (13E233) on the iPhone.

  Full version on the iPad pro is the same.

  Hello! The problem has already been solved. Update to iOS 9.3.1 is already available through iTunes or live.

• Added on phone, Skype contact does not appear on the desktop.

  I sent a friend request to my friend via my Samsung Galaxy S4 and he agreed. We were chatting by text, and I decided that I was better at typing. I got on my laptop, but when I clicked on Skype (running current version 7, 6) he told me that he wasn't on my contacts. I sent it to him but he never had the request. On his screen, it says that we are friends. On mine, it is not. So the only way for me to talk to him is on my phone, but I'm bad enough to send SMS with precision.

  Can someone help me please? Thank you.

  Oh! Never mind! Do not take into account!

  My status has been set to 'offline '.

  If in the future, anyone have this problem, make sure that your status is "Online" that will update everything! ^.^

• my iphone is locked more 6 s - I know that my password - it works come not square around the numbers and nothing happens

  my iphone 6s more is locked - I can't get into my phone - I don't know not my password - I tried - it puts a square around the numbers of password - it say I need my fingerprints to do - I have try - it does not work - what should I do to get into my iphone 6?

  This means that you are likely to not put in the correct access code.  If you never restart the device, you will need to put in the code for the first time, then later, you can use your fingerprint again.

  If you remember the password, you can then follow these instructions.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Condition of additional results work does not correctly for the parameters

  TestStand 2014

  Trying to connect a parameter only if the status of the step is "failure" will not save the setting when the step will actually fail.  On the other hand, variables with the same State will record very well.

  The sequence attached illustrates this.  Basically I have a sous-suite that returns a random number and a string as parameters.  I use the random number to evaluate against my limits for the test call.  I want to save the parameter of string only if the step fails.  So I put as an additional result, then assign the condition

  Step.Result.Status == "failed".

  The data never show on the report.

  But when I put a result additional explicit with the same local variable and put the same exact condition it appears on the report when the step fails.

  I'm puzzled as to why settings will not open a session to this condition, but additional explicit results work fine with the same State.

  Any thoughts?

  Thank you

  Condition for additional result of the parameter is evaluated before the State sequence is set to failure. The 'out' parameter additional results are evaluated probably just after the code module, so if the status of the step is not changed by the call of code module, then it will always be "Running".

  I can see how it would be nice if it worked the way you ask, but keep in mind for input/output parameters it is usually the same expression/variable to both the 'in' and 'out' additional result, so it is important to the time at which the result is recorded. It must be done before calling code module for 'in' settings and after the call of code module to 'out' parameters to reflect the State of the variables to these points in time. I think that the intention is that the additional result for settings must reflect the State of the variables at the point in time immediately right before the call for 'in' settings and immediately after the call to 'out' parameters So if you want to connect under certain conditions a value based on the status (where the State is not changed directly by the code module), with the help of a result extra ordinary as you discovered is probably the best way to go.

  Maybe for the parameters we might delay logging to the end, but which may result in a change of behavior if the variable state changes again once before that. If you want us to consider or have another idea for how to handle this better please let us know or maybe post something to the exchange of ideas.

  Another possibility is that we could temporarily connect the results before and after the code module, but then not assess the condition to the end and throw the recorded result if the condition is false. Who can still cause a change in behavior although if "Value of Log" expressions have side effects.

  Hope this helps clarify things.

  -Doug

• ePrint works do not properly with the iphone and hplaserjet400

  Recently, I signed up for eprint and tried to print a jpg from my iphone. A leaf print that said, "sent from my iphone", but the attachment do not print.

  Hi MC - KM,.

  Welcome to the HP Forum.

  You probably just still need the application on your phone.

  Check it out...

  Instructions

  How to print with an iPad, iPhone or iPod touch

  • Open the link
  • Open the document linked, then Section ePrint or Non-compliant ePrint printer
  • Then, open the mobile application of section HP ePrint

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• Getting the generic host process error. Using XP SP3. Programs do not work, can not connect to the net, etc.

  If this can help:

  Application name: SVCHost.exe AppVer: 5.1.2600.5512 Offset: 001a6f64

  Hello

  ·          You receive error message generic host when you work with a program or a particular application?

  ·          Do you remember any changes made on the computer before the show?

  ·          What is the service pack installed?

  ·          What is the number and the model of the computer?

  ·          You have all the products HP installed or connected to the computer?

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  You can check the links below: error messages when you start a Windows XP-based computer and then try to download Windows updates: http://support.microsoft.com/kb/931852

  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095