Slide views - LMS records a slide filled without playing all frames on the slide

Similar Questions

• Can I get an imagefield to fill images on all pages once the image is uploaded

  Hello

  I'm fairly new to LC and I have a dynamic long form from scratch. This form will be used by sales, which will be

  'configure' services, taxes ect to be on the form, then send it to the applicant to be filled. I wish that our sales representative to be able to upload an image to a field of the image (logo) and this logo to be displayed at the top of each page. As I can't seem to add an image field action, how can I do? Million thanks in advance!

  They do not have access to the page master - the master page is what the form is built on, where you set your margins, setting page, boilerplate info, etc.

  You could also have a field of the image on the first page and the image of the field where else you need them and use the global binding to share the same data - for global binding to work they must have the same name and then on the object > link set palette data binding to use global data.

  Or you could code with the rawValue: imageField2.rawValue = imageField1.rawValue;

• Add an element to a cluster without updating all users of the cluster

  I have a cluster that is sent to many different vi. Whenever I have added to this cluster, I need to change every vi that uses it to fix the various controls of input terminals and ungroup by names.

  I'm not change or remove existing items in the source cluster. just to add another element that one worries of the vi "shipwreck" for others, it is simply one don't care. Is it possible to avoid having to fix each "sink" vi when I do this? I would only need to update the vi that uses the new element (which of course, I do anyway).

  In C, I can update, add a member to a typedef'd struct and everything is fine - no problems; How can I do something similar in LV?

  If you branch out a cluster then all sinks must be the same. You should do your cluster a typedef and use the typedef on your screws in this way that you change only one place. Even with the a typedef in C.

  LabVIEW manual contains instructions on how to create and use of typedefs.

• How to create an animation loop files photoshop without them all overlapping on the frame before the last?

  Hi, I use a mac and have attempted to create an animation loop in legacy but when I delete the last keyframe on my original composition, for some reason any all my layers of stitching to merge into one on one before the last keyframe and creates a slight glitch all along. Thank you.

  This could have cache problems. I would approach this kind of animation differently. Instead of sequencing layers could import as a sequence of images. Make sure you have defined the interpretation of your sequence of images based on the cadence of your final file. Looks like you have picked 2 image by image, the standard for animation-Cellulo. 12 fps to 24 fps project where each image is duplicated. So, if that's what you want, import your sequence of photoshop 6 framework as a sequence, the film as 12 fps, drag the sequence in a model of 24 fps which is long enough for the complete shot, enable time remapping effect, go to the last time remap keyframe using the k key and then return a frame by using the page to the top or Ctrl/Cmnd + key left arrow , add a new keyframe, remove the last keyframe and add the expression loopOut(). That's all there is to it.

  If you want to use your sequenced layers and you have a cache problem or a problem of frame between the comps rate then to restore your layer comp sequenced like a movie and loop that.

• How can I transfer text frames of the legend of the Slide Master view to view the film?

  I am a new user of Captivate.

  I created my own master slides. Many of them have blocks of text. My intention was to have the text frames appear whenever I have created a new slide in the Filmstrip view. Instead, I see just the text that I wrote (Insert text "here") in the background. I can't click and change the text in the view of the Film Strip.

  Could someone help me please? How can I make my text in the view of master frames appear as blocks of text whenever I create a new slide in the Filmstrip mode?

  Thank you.

  Levi

  If you want to "text frames", where the text can be changed in the view of the Film Strip, you must insert placeholders on the master slide. You probably insert text captions.

  Anthony

• I have a problem with my HDD to fill without no reason.

  I have a problem with my HDD to fill without no reason.  I should have about 340 GB free and it reads now only 18 GB free.  Can I have found the culprit (Revo Uninstaller Pro) because he stop to fill in after I removed it.  I can't find where all the "whatever" went.  I don't see anything funny in the registry and cannot find the strange files on the C drive under computer.  I wouldn't mess with the registry too but I as I am limited in my understanding of what's there.  I scanned the hard drive with my Avast Anti Virus and the Microsoft Emergency scan engine and found nothing.  If someone could give me an idea of what happened and how to get my rear disc space, I would be grateful.

  Avoid Revo Uninstaller Pro software type (including the registry cleaners "" and system optimizer).
  Programs and features does the job quite well.
  -There is no advantage to playing in the registry.

  -First run Disk Cleanup defragment the HARD disk in order to have a 'clean' basis of work form.

  -Treesize will show exactly what is there and how much of it.
  http://www.Jam-software.com/treesize_free/

  -Check how much space is used by System Restore.
  Restoration of the system- How do I

  -Indexing research is supposed to implement a very large file as well. You can limit where it indexes
  or turn it off completely in - Control Panel > Indexing Options
  -Check there is no software constantly writing/rewriting something. These activities have
  view in Task Manager-process.

  -Have another look through programs and features and see if there is has than nothing installed, you
  do not use or need and to uninstall, but software doesn't generally use a lot of space.

  .

• did not get the activation key with my Windows 7 Home records. How do without pay $49 for technical support?

  did not get the activation key with my Windows 7 Home records. How do without pay $49 for technical support?

  You can connect to the Microsoft Store and retrieve your product keys:

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

• Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?

  Mr President.

  Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?

  Because I change the size property of the table 5 range and my new record is inserted at no 10.

  When I click the addRecord button the new parallel line does not appear, do scroll down to see it.

  I want that we don't have to scroll down.

  The line is displayed automatically.

  as shown in the photo my behavior of page.

  

  Concerning

  If you just need the newly created line to be visible,

  You can simply set contentDelivery = 'immediate' and displayRow = "selected".

  P.S. the blog mentioned above only.

  See you soon

  AJ

• View a record of Contacts if they are already Contacts in Eloqua to submit the form Eloqua previous e-mail address

  Hi people,

  My apologies if this is an easy question, but I'm new to Eloqua, and I can't understand it, then I hope one of you, kind people can point me in the right direction.

  Basically, I want to have a form on a hypersite were to enter their e-mail address of the user and then click on submit. On submit they are redirected to an another hypersite that displays a form containing some of their contact record fields, if they are existing users I want the fields to be pre filled with contact information, and clearly if they exist not in the system will be the only area that will fill the email address.

  My problem is that I'm not sure how to get the fields to pre-populate in the second form, I know that you can set to pre-populate in the form builder, but im assuming that when you load the form he needs to know what you save are searching fields be filled with If it exists. All this will be done within Eloqua itself, i.e. Forms and the hypersites.

  So just I want to load coordinates into the fields of the form to the e-mail address that was selected on the previous form.

  any ideas on how to do this?

  Any help is very appreciated.

  Kind regards

  Andrew Mc.

  Hi André,.

  This can be done

  (1) on page hypersite - when you insert the form you must click on "map of form fields. This will take care of your form fields hypersite element.

  (There are two types of prepop, one if a person comes to an email and another, if a person comes to a hypsersite page, that it will convert the right type)

  (2) the first form, they argue with their email, change step of final processing of the page of confirmation - "create hypersite and redirect to PURL. This can be done by going to the processing step and click on the small arrow next to the stage of confirmation page and choose the right one. Configure step to send them to the page you created with the form.

  I hope that's enough sense to help you get started.

  Omar.

• Materialized Oracle view | Deleting records, Oracle materialized view

  One question reg Materialized views.
  
  If as part of the interview of the Source database, we remove some (older) recordings, the materialized view will also be updated with the deletion?
  
  I believe that the answer is Yes. In this case make sure that deletion is not the case?
  
  Is there anyway that we'll stop MView update to delete records that is inserted once even if we remove the same records in the source DB?

  This is a common scenario, especially with materialized views that summarizes the detail data where you want to keep the summary but not the detail, and it is discussed in the documentation.

  The technique is to make the MV refresh on request, delete the data in the detail tables and the CONSIDER_FRESH procedure to prevent the changes propagating to the MV. You will probably find it in the docs by searching on DBMS_MView.Consider_Fresh. There are a few caveats to note, in my opinion.

• View only records do not change in my music files?

  Very well. A few album covers and others were not in my opinion, so I saved all my music on my computer and formatted. I crossed of WMP11 and edited all the Advanced tags, album names, artists, everything. Then I put everything in place on the drive and everything is back to how it was before I had it took off and formatted, it - he has not saved any changes to all my music files. Help?

  Remove files from the view, disconnect, reconnect and then copy files that have changed to the view;

  Looks like that it inspect the files again if they where in the database of views before more later connect (even if changed timestamps)

• No mouse works, all recognized devices, the strange slider movement

  I have Vista Ultimate 64 - bit SP2. I have a Logitech MX Revolution mouse and used a Microsoft wireless mouse and a Logitech Wireless Mouse Nano to test.

  I have been using the MX mouse for a long time without any problem. Then the mouse froze on screen. I restarted and since no mouse really work.

  The Manager of devices, says all is OK and shows the most recent drivers for all. I can remove all devices, reboot and install only a mouse - same problem.

  I have two big clues here. ((1) the device is recognized by Windows and works correctly (according to DevMan anyway) and 2) there is a few clicks of a mouse - but it's very random, strange little movement and is NOT connected to any movement of the physical mouse.

  The last clue makes me think that the e/s of the USB mouse was redirected to nowhere and the system is looking at a communication port that occasionally sends a signal interruprets Vista as being the movement of the mouse.

  Also, when I first installed the mouse Nano (same USB interface wireless), he worked for a few minutes, then frozen. I can't fix that, except turn off the mouse and turn it back on - then it may or may not work again.

  I also have a wireless Microsoft (not even wireless) keyboard, and who never stopped working. I can browse almost anything with the keyboard.

  I removed all Windows updates and uninstalled the drivers and software for all mouse devices. I also uninstalled all programs recently installed/updated and then rebooted - no change.

  The point TO make is that the cursor on the screen moves sometimes randomly on its own in ways weird and that it is absolutely not related to a physical movement of the mouse. The same motion occurs when no physical device is connected and no driver or other software on the machine for the mouse.
  Jordan J. Hotzel, A.A.S., SMT, A +, Network +.

  You can re-install the updates and programs that you have removed and also install and run these two programs...

  SuperAntispyware - http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html

  Malwarebytes - www.malwarebytes.org

  Sometimes, the malware can do strange things like make the mouse cursor to walk...

  Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• View the name of the person who got pay MAX() of all employees and the amount of salary without the aid of a subquery

  The table is the table of the sample already provided to the user 'hr' to oracle. The structure of the table is:

  Name

  Null value

  Type

  --------------                        -------- ------------

  EMPLOYEE_ID	NUMBER (6) NOT NULL
  FIRST NAME	VARCHAR2 (20)
  LAST_NAME	VARCHAR2 (25) NOT NULL
  E-mail	VARCHAR2 (25) NOT NULL
  PHONE_NUMBER	VARCHAR2 (20)
  HIRE_DATE	DATE NOT NULL
  JOB_ID	VARCHAR2 (10) NOT NULL
  SALARY	NUMBER (8.2)
  COMMISSION_PCT	NUMBER (2.2)
  MANAGER_ID	NUMBER (6)
  DEPARTMENT_ID	NUMBER 4

  So I wanted the result to display the 'FIRST_NAME' of the person with the maximum salary of all employees and the salary of this person "Max (Salary)".

  I had the answer to the following query:

  Select first_name, salaries of employees

  where wages (select max (salary) of employees);

  But I wanted to know if there was another way to get the results without using subqueries? Thanks for your help. Appreciate it.

  Use the DUNGEON:

  Max (first_name) SELECT first_name from Dungeon (dense_rank last order of salary).

  Max (salary) salary

  of hr.employees

  /

  FIRST NAME SALARY
  -------------------- ----------
  Steven 24000

  SQL >

  SY.

• View connection Server 4.5 fills memory, unresponsive

  Hi all.

  We were expiermenting with view 4.5 for a few weeks now and I came across a disturbing problem.  After a few days, our customers view will not be able to connect to the server.  Shows the server console that it lacks virtual memory and has tried to increase its allocation of opening.  In doing so, the Web site and a connection to the server stops responding and the system must be restarted (it's easier than restarting the service).

  We started running the server (Server 2003 Enterprise, 32-bit) with 512 MB, it increased to 1 GB and it rose again to 2 GB.  The use of memory continues to climb and the pagefile is nearly full again.  Manager tasks shows nothing consume the whole portion, but the process of ws_TomcatService (Web of VMware View service component) employs approximately 250 MB of memory and has the largest share of memory listed/consumed.

  Does anyone have an idea why the memory grows out of control?  We need to try to pass to the Server 2008 64 bit (which is on our to-do list)?  We cannot let the server have a runaway memory consumption, but we can give him a little more if you have to.

  We have 23 jobs in sight, no automatic deployment and no ThinApps.  We are running on vSphere 4.1 and use not all replication between servers of the view (we have one per site).

  Thank you!

  Alan Price

  Hi, Alan. 2 gig is not close enough to the server of the view.  For the installation of 32-bit, you must at least 4. Made to low memory to start this way and found our clients are disconnected while being not not able to connect to any.  Once we reached 4 GB, we were good.  I'm not sure about the memory leak on that Yes, it's strange.  I know that tomcat has proved to be quite the pig, even in Virtual Center.  We did move from 32-bit to 2008 R2, and it is an experience much better.  He recommends 10 gig of RAM and that is probably the sweet spot on the side of 64-bit.  Do not take into account all messages from Hi Alan, my machine has panicked and brought me to hit the button send 3 times!

  Thank you!

  Stem

• How to view more records on 15 page

  Hi all
  I have the table that is the results table
  but it shows only 15 default folders
  and watch then link fo more records
  
  
  I want to display the cards from 1 to 99 in one page
  
  How can I do
  using personalization or customization?
  
  and how?

  HA,

  Set your table RECORD DISPLAYS advanced in visual according to your requirement 99.

  Kind regards
  GYAN