View only records do not change in my music files?

Similar Questions

• do not show hidden files, folders or drives - in the view tab - button will not change

  • Windows explore-
  • Organize-
  • Folder options and research-
  • See tab-
  • do not show hidden files, folders or drives button (small blue dot)

  It will not disappear.
  There is no button 'Show hidden... '. ».
  There is only 'don't show me. " ' button.
  It will not change no matter what I do.
  Most other items in the view tab have check boxes or replacements to choose.
  This is not the case.

  I want to see everything.
  What gives?

  P.S. On a side note - I was looking for initially c:\programdata (directory). That's how all this started. I FOUND IT, is told in passing. HOWEVER - IT DOES NOT EVEN APPEAR ON THE PROMPT BACK - OMG.

  Just thought I would add that :)

  Hi JoeNed,

  I see that you have some problems with the display tab in windows Explorer. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check if that helps.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Method 2.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 4.

  You can try to restore the computer to a date earlier and check.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Method 5.

  I would like to create a new user account and check if that helps.

  Create a user account: http://windows.microsoft.com/en-IN/windows7/Create-a-user-account

  If the problem does not occur in the new user account, you can transfer the files from the damaged to the new user account by using the article user account "difficulty a user profile is corrupted.

  Difficulty a user profile is corrupted: http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I can't go in the drop down menus to work, I roll over and click on, nothing happens. Clicking on some of the miniature pictures to change the magnified view, the captain does not change. So annoying! I can't use FF like that. I am newly updated, 10.0.1.

  This site (http://video.pbs.org/) drop downs 'Programs' and 'Subjects' do not work when you click on it.
  This page (http://www.modcloth.com/shop/dresses/ain-t-over-until-it-s-clover-dress) when you click on the thumbnails of the green dress, the larger picture view does NOT change.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Windows media player not automatically opens a music file by double-clicking the file, but don't open the music file to play if windows media player is already open

  Is there a way to open the music files by double clicking on the music files without having to the open WMP?

  Hello

  -What happens when you double click on the music file? It opens in another program?
  -Don't you make changes to your computer because of which the question began?

  Follow these steps and check if they help.

  Step 1:

  At first I would recommend you change the file association music playing in Windows Media Player and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Step 2:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Test the issue in a new user account.

• Make changes to my music files in the pane Details gives unknown error 0x80004005

  Hi all and thanks in advance.

  IM unable to save changes made to my music files in the details pane, located at the bottom of a folder window when I press save button all I get is a message saying there was a problem saving and the unknown error 0 x 80004005.

  any help to * address email is removed from the privacy * please

  Thans, Neill

  Properties file music

  Hello some advice please.

  Ive already posted an im unable to change the properties of files of music at the bottom of the screen, but now I found on the Security tab in the files of an album the following: S-1-5-21-2873062381-682073676-1007901372-1003

  Ive no idea what that means, but it has full control!

  Ive re built the musical library to no results and this album was torn off a cd of friends regarding all my music so ive no idea why this showing different properties

  any ideas?

  Neill

  Hello

  1 when was the last time it was working fine?

  2 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you run the troubleshooting Windows Media Player Settings Troubleshooter and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Also run

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  I also suggest to try to run the System File Checkerscan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Note: You may be prompted to insert the Windows Vista installation DVD, if any files are missing or damaged.

  Hope this helps and keep us posted.

• After restoring my computer and iTunes download, iTunes can not find my my music files.  They have to be in the specific format or a folder iTunes for a recognized?

  I had to restore my computer from the ground upward.  I save my music files and then reloaded after the system restore.  Then, I downloaded the latest version of iTunes.  But apparently iTunes can't find my music restored files.  I use a 10 newly installed Windows.  Y at - it a particular format to place the music files should be put in order for iTunes to see.  Or maybe a procedure that I did not follow properly.  Please notify.  Thank you.

  If you have registered to the iTunes library database files, launch iTunes with the SHIFT key is pressed and choose this library. If this isn't the case, slide the song files into the application window open iTunes or add it automatically in the iTunes folder.

  (144153)

• structure of the event recorded does not change value

  I have a VI that communicates with an FPGA via a telnet interface.  I have several Boolean controls on the front panel.  When you click a control, it sends a write command on the face i in telnet to the FPGA.  Similarly, if a process in the FPGA himself wrote the same registry (that control written when I clicked on it), an order is generated in the FPGA and returned to the VI and the control (via a local variable) lights or unlights accordingly (based on value).  In other words, these controls are read-write...

  It's all workers, except for one important thing.  I have the code that runs through a structure of event whenever the value of the control changes.  I can see that this code executes in fact when I click on the control via the front panel.  HOWEVER - when something is generated in the FPGA finally changes the value of the control, the structure of the event does not, even if I see the value of the change of control on my front.

  A specific example, I have a control named CLIENT_LB.  When I click on CLIENT_LB, I see it lights up, and I see the event structure code run.  Now, if I have the FPGA process to set CLIENT_LB to 0, I see unlight on my front, but does not run the code structure of the event.  I have probes in place who have checked the associated local variable CLIENT_LB evolving impact of values.  The structure of the event reads: 'CLIENT_LB': value change.

  Shouldn't an event structure "value change" run when the value changes, regardless of whether if it happened manually (i.e. me by clicking on the control) or automatically (i.e. the FPGA written in VI and changes the value of the control)?

  The VI is great, and you would not be able to test it in any case unrelated to the material, to remedy that I've attached 2 screenshots, I have described below.

  1. This is where the string from the FPGA analysis occurs.  The chain between the sub - VI, and then the data chain part is hidden to determine if the Boolean value of the control is true or false.  I put a probe on CLIENT_LB, and I see that as the FPGA changes the value of the register, CLIENT_LB passes from false to true as a result.  I checked this several times.

  2. it is the structure of the event.  This code runs when I click on CLIENT_LB on my face, but does not run when the peak CLIENT_LB #1 local variable is changed.

  Writing to variables never fires events to "change the value. If writing should raise this event, use the property "Value (follow the signs).

  Norbert

• Names of artboard only recording does not

  I use evil CS5. Plans of work renamed in several files. While in the file a new name in the window of the artboard. Record. Close file. Reopen the case, the names came back default namespace.

  I restarted, close, he left the building. Nothing seems to help. Suggestions?

  The name of work plans in the only where it has been introduced in CS5. A CS4 file has no idea that work plans can have a name.

• How can I make my friends list in windows live for my viewing only and will not be shared with any of my friends

  I want that my list of contacts and friends to not be seen when people (including my friends) light up on my profile page on windows live or windows live messenger

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• BlackBerry Q5 downloads from the internet only recording does not

  Help please, how to save internet downloads? It gives the ability to save, it automatically opens the file.

  I had the same problem. But all you have to do is to maintain the link until the open option box then u click on save the link to the file and it will save

• Download files, download only once, do not replace the old same files

  Hello

  For our company, we work with many files on firefox.

  On a computer, when we download a file (Open Office), it does not replace old file, we downloaded before. The system adds (1), (2), on behalf of the end of the file. When we have to save this file, we have so many files for the same thing but with several versions.
  In the Options, I checked that Firefox always ask for the download location. And enforcement, asking for all Open Office files.
  For other computers, there is no problem.

  Thank you.

  I think that, by resetting download action, can solve your problem.

  To reset all the how many files types are managed by Firefox, return to the default value:

  Open your profile folder:

  First, at the top of the Firefox window, click on the Firefox button, hover over the menu help and select troubleshooting information. The troubleshooting information tab will open.
  Then, in the Basics section of the Application, click Show file. It will open a window with your profile files.

  Then, at the top of the Firefox window, click on the Firefox button and then select leave
  Then, rename the mimeTypes.rdf file to mimeTypes.rdf.old.
  After all, restart Firefox.

  For more information, you can see this article to change the parameters of type file

  Hope this is useful

• Why Windows backup all files to predefined backup weekly? How can I get to only add additions and changes to the backup files?

  I back up my files to an external hard drive.  Rather than simply add changes or additions, it adds all the files each time, causing the hard drive fills up quickly.  This problem was not always present; It began less than a year ago, so I wonder if it was caused by an update.

  Hello

  Method 1: the link below will help you to set or change automatic backup settings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  Method 2: you can also check out the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I hope this helps!

• recording does not excell on virtual windows files 7

  Dear Sirs: windows 7 is installed on a mac pro with Parallels desktop 8. Windows and mac have separately installed excell. When in windows 7, it will not save excell except in Excel for mac, which defeats the purpose of having microsoft office professional with access (not available for Macs). I'm not technical but you can see excell in the navigation pane (I think you call it) but it does not have the right to try another choice and my choice to open it with do not show anything, but excel for mac.

  Thank you for your attention, parallel is supposed to call me around 09:00 pete.

  Hello

  Thanks for posting the request in the Microsoft community!
  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  TechNet forums - http://social.technet.microsoft.com/Forums/en/categories/

• Ingest does not change the name of files

  Hello, I am trying to ingest a project who shot the 3 cameras, canon 523, canon 60 d, canon 70 d all files mov, suddenly on one day. I am trying to ingest and rename using crΘation HH-MM-SS. I put all the files in a folder before you ingest it and set it to 'Rename the file' and 'transfer of clips to destination '. When I ingest, it copies the files to the new location, but they are all always named with the name of the original file. I have tried with and without transfer clips and tried to rename different criteria such as "Custom Text" and nothing works. Always the same old file name.

  Any help? I spend a lot of time trying different things and nothing works. The possibility of multi-cam rename turned times sounds wonderful, but it does not work for me!

  Thank you!

  HI -.

  I took pictures of my Canon 70 d, copied in a folder (as you mentioned you did) and then she ingested from there. I created a new Preset to rename and used the CREATION TIME format HH-MM-SS. I activated the TRANSFER box, I also enabled the FILE RENAME box and then clicked on INGEST.

  The files copied all followed the naming convention that is appropriate, as defined in my preset.

  You can take a screenshot of your configuration of INGEST dialogue - list all the options for the FILE RENAME section? If you can send me your file rename PRESET that would be useful. To find the file rename PRESET on disk, click on the DROP DOWN MENU at the end of her rename preset selection control and choose "show in Finder/Explorer. The presets file is selected. Simply copy and paste or attach to the post on the forum - or you can send it to me directly at [email protected] if you wish.

  I can't think anything else to try for sure at this point if your response is expected in return, and we can see where we'll go from there.

  Thank you!

  Michael

• can not change the drive history file target

  The original target for the file history drive no longer exists, but file history insists on the use of the old drive. I can choose another drive, but the file history continues to try to connect to the old drive.

  Hi Bob,

  We recommend that you use a network or external drive location to help protect your files against an accident or any other PC problem.

  Method 1:
  I suggest to return the item and try to set a different drive for history file.

  Set up a drive to history file

  http://Windows.Microsoft.com/en-in/Windows-8/set-drive-file-history

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  What happens if something is wrong in the history of the files?
  http://Windows.Microsoft.com/en-in/Windows-8/what-something-goes-wrong-file-history

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.