Slider for f4v files control

Similar Questions

• Knowledge check test slide for several controls of knowledge

  Hello

  I created a series of pools quesiton. I have 9 knowledge controls in my project which are questions from a pool of quesiton randon.

  At the end of each audit knowledge, I want to display a page of results of "quiz". When I select this option in Quiz preferences, it displays only a slide of result after the FINAL knowledge control.

  Is it possible to have a review after each audit knowledge?

  Your help is greatly appreciated!

  Susan

  It will be not possible with normal question slides, because only the recovery feature clear responses and it will always be the whole of the quiz.

  If you want to use the question slides, because you find it too cumbersome to create custom question slides, for now I don't see a solution with multiple files of Captivate: each audit of knowledge must be a different file, where you can add the possibility of recovery. If you want to see all the results in the main file (who called knowledge small check files), you will need to use JavaScript or the widget Save & Load Data from Michael Lund (cpguru).

  Lilybiri

• Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Hello

  ·         Is that what the problem is with a specific file extension?

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the steps below to solve the problem:

  Method 1:

  If you have problems of location of the files, folders, or other items on your computer, try using the search and indexing of troubleshooting to solve the problem. It ensures that the Windows Search service is running and checks if you have the correct permissions to search all the directories on your computer.

  See the article below for additional information and steps.

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2:

  Also I ask you to re - index files and then check. Follow the artticle below for the procedure.

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  See also:

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this information helps.

• Must provide F4V file for the client, but I use AE CC 2015 so it is no longer possible.

  I provide an F4V file for a client. Is a file format, not that I like in all before - it must be used with Flash files apparently.

  This file format is not available for export with AE CC 2015 - not from CC or CS6 I think.

  So I downloaded these versions of the Cloud. However they do not open because my OS is too recent. 10.10.5 Yosemite

  I learned that I can use an older version of Media Encoder - version 7 for this export file format, but all I can download Adobe are updated. Which of course will not work.

  So I'm stuck.

  Suggestions?

  Have you tried to rename an aa h.264.mp4 f4v? 99% of the time to meet with the same file.

• Is there a control of the type of compilation for .as files?

  It seems that there is no support of compilation for .as files. I have made a typo, typo HttpService, instead of HTTPService, in one of my .as files, but surprisingly, Flash Builder does not report it at all. I enabled 'Build' automatically, so I guess that if there are errors, Flash Builder has the flag. I also tried to clean up the project and force to build the project manually, but still it doesn't show any compilation error problems.  See screenshot below:

  

  On the other hand, if I made the mistake in the .mxml file, Flash Builder it correctly mark as error.

  Please see the screenshot below:

  

  I want to have the type of compilation to check what work on .as files too. Is there a way I can activate that?

  Thank you.

  Your results are correct. The compiler is limited to the display of compiler errors in the context of a compilation unit (application, module, etc.).

  Jason San Jose

  Software engineer, Flash Builder

• Text slides completely / "this file has no associate... program. »

  [Dell Inspiron 560 desktop PC; MS Windows 7 home; Windows Live essential Mail; MS Word 2003 Pro; Mozilla Firefox 17.0.1]
  Hello, everyone has seen these 2 weird glitches?  If so, please help?
   
  (1) I type in my WLMail when suddenly the cursor starts shaking and all typed text slides quickly down! Nothing that I don't stop and it takes a lot to bring up...if/when back I succeed.  Even in trying a new message in another window, it does the same thing.  Most of the time, I lose the text... Frequently...
   
  (2) in addition to this and suddenly, since yesterday, I get the following error message when I try to open most of the all the links in the emails or the web site (if I'll put it on the browser window, it works):
   
  This file does not have a program associated with it for performing this action.  Install a program or, if such is already installed, create an association in the default program control panel.
   
  I often scan with Malwarebytes antiMalware', with CNettoyez and now have run chkdsk, etc. .. .but nothing seems to help.
   
  Thank you very much help!    :)    Leidirosa

  Hi Leidirosa,

  1 - is the question are created in Windows Live Mail? Have you checked the issue in another application such as Microsoft Word, Excel etc.?

  2. are you aware of changes to the computer before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

   
  Note: If infections are detected during the scan, there could be a risk of data loss, as the infected files will be deleted.
   

  Method 2:

   

  As the error message indicates clearly, setting for the file in the Control Panel extension should solve this problem.

  a. open programs by default by clicking the Start button, type thedefault programs and then clicking default programs.
  b. click on associate a type of file or Protocol with a program.
  This opens the list of extensions. Click on one of the extensions.
  c. to change the default program for the particular extension, click on the button change the program .
  d. Select the program you want to open with, and then click Ok.

  See also:

  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  You can also post the question in click Windows Live Mail here.

  Hope this information helps. Response with status so that we can help you.

• Drivers for Win XP controls do not work on Satellite A200-1 g

  Satellite A200-1 g PSAECE-02D00ERU drivers for Win XP controls do not work!

  First of all I ve downloaded all the drivers for "model PSAEC.
  Everything is fine, but 'pilot controls. " When I install it, 6 buttons (play/pause, next, previous,...) Don t work! Become too slow cursor keys. By example, if I press it for 2 seconds in Word and then release, I can see the slow cursor movement while I m not doing anything.

  After that uninstall drivers controls (restart installation) the keyboard becomes normal but 6 buttons (play/pause, next, previous...) still don't work.

  What should I do?
  Help please!

  Please note that you must update the BIOS to the XP version if you want to use XP on this laptop Vista operating system!
  In addition, you need to install all the drivers of Toshiba in the right order. Check the installation instructions (available) txt file.

  Good bye

• Insert quickly slides of several files

  I have been using PowerPoint for many years, but now I want to change my speech.  On PowerPoint, there is a feature where I can "insert slides from file".  I have often used this function to insert the files (database of song lyrics) quickly to form a unique presentation with special songs, I need on a given day.

  I would like to know if there is a similar feature on Keynote, or if there is another way I can insert quickly from the files of a database to compile a unique presentation.

  It would be much too tedious open individual database files, select all of the slides, drag them into the new format, and then close each file database.

  Any help would be greatly appreciated.  Thank you!

  If there is another way I can insert quickly from the files of a database to compile a unique presentation.

  Only databases Keynote can access media import files are iTunes and PHOTOS.

  Insert quickly slides of several files

  Keynote can directly move the media to a folder if they are graphic compatible QuickTime video and audio.  Drag and drop pictures on the Panel of the browser, it is located on the left side of the slide canvas.

  We can quote:

  video; MPEG4 H264

  audio; AIFF mp3

  graphics card; TIFF JPEG PNG PCT

• I should "separate compiled code in the source file" for *.ctl files?

  There are a few good reasons to code compiled separately to screw

  Now, the option is also available for custom orders/type definitions. I wonder if there is any benefit whether for the separation of updating the code of these? None of the reasons for separation will apply to *.ctl files, after all. In fact, it might even be disruptive - in some quick experiments, separation of compiled code has increased the size of the files *.ctl!

  (Transferred to https://lavag.org/topic/19681-should-i-separate-compiled-code-from-source-file-for-ctl-files/ )

  Hi JKSH,

  Good question!  After searching for a bit, the first reason mentioned in the KB, you are connected (to simplify the source code control) looks like it could apply to the .ctl file.

  I guess that similarly to how changes in 1 VI cause unsaved changes in any screws that call it, changes with a .ctl file can do the same thing.  However, it seems that separation of compiled code make it possible only to make changes to a file at a time, without the domino effect.

  Best,

  David Randolph

  Engineering applications

  National Instruments

  www.NI.com/support

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• Windows cannot find C:\WINDOWS\system32\rundll.exe. Make sure you typed the name correstly and then try again. To search for a file check the Start button and then click search.

  I tried to launch my Spysweeper and found that is not there, then I re downloaded and I could not install it because it was already on my computer.  I went to the control panel to remove and got the message:

  Windows cannot find C:\WINDOWS\system32\rundll32.exe.  Make sure you typed the name correctly and then try again.  To search for a file, select the Start button and then check the search...

  What should I do?

  Hi gsrow,

  You can go there!

  Cannot find the Rundll32.exe file when you open the control panel:
  http://support.Microsoft.com/kb/812340

  Alternatively, copy the folder C:\Windows\System32\DllCache Rundll32.exe file to the System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can not find partition for temporary files

  I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB

  Hello

  Thanks for the reply.

  I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

  Method:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Hope this information helps you.

• I can search for a file "xyz" and find everything BUT the file I want. This happens even when I know that the file exists.

  I try to search for a file... choose any file name... like 'cat' but get everthing that doesn't even look like a cat.  I can get a list of files of a thousand, but anything containing same cat in the filename OR in the file. No idea what I am doing wrong?

  John

  Hello

  "Maybe" there is something in the search Index that is causing a problem or try the advanced options
  Search.

  Windows Search does not work or research are slower
  http://support.Microsoft.com/GP/windows_search

  Troubleshooting Windows Vista search & indexing errors
  http://www.WinVistaClub.com/T24.html

  Reconstruction of the Index in Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/
  How to enable or disable the search Index in Vista
  http://www.Vistax64.com/tutorials/69564-index-enable-disable.html
  Improve Windows searches using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  ================================

  Tips for finding files
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

  How to use advanced search in Vista Options
  http://www.Vistax64.com/tutorials/75451-advanced-search.html

  How to restore the page button on the Start Menu after installing Vista SP1
  http://www.Vistax64.com/tutorials/145787-Search-start-menu-button-restore-after-SP1.html

  How to restore the context Menu item search after installing Vista SP1
  http://www.Vistax64.com/tutorials/134065-search-context-menu-item-restore-after-Vista-SP1.html

  How to create a shortcut on the desktop search in Vista
  http://www.Vistax64.com/tutorials/126499-search-desktop-shortcut.html

  ----------------------------------------------------------

  Win Key F opens advanced search

  Searching in Windows Vista, part 1
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Part 2
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Part 3
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Search for all files? Search by creation date?

  How can I search within all files?  I know that the files are there and contain the words I'm looking for, but Windows cannot find them.  Some files do not have extensions, some have a .bak extension and some have various other extensions.

  Also, I see an option to search by modification date, but not created.  How can I search for all files on my hard drive, created on a particular date (including the .dll, .exe, etc..).  I'm trying to find all the files that were installed with an application.  The files have different change dates, but all have the same creation date (when the application has been installed).

  I do not understand how that returns results for all files (including non indexed files).  Can you please explain?

  The search interface has been simplified at the request of the overwhelming majority of users. Until a more sophisticated user, you liked the very high amount of control WHAT XP gave it. The new interface 7 has fewer orders. When the research opens, you will see an "additional search... "Computer" and other. Since you are obviously in control of syntax, the interface for non indexed opening files is quite simple. There is always the option to expand the index to include everything. (Control panel/Indexing Options)

  If your index still don't "look in" a file, you can try to assign an 'association' for the file type. I have no idea what the .xyz file type might have as a native association, but you can associate this notebook. (right-click, open with, choose default program..., see the box always 'use..')

  Messages rating helps other users

  Mark L. Ferguson MS - MVP