Knowledge check test slide for several controls of knowledge

Similar Questions

• Example of test bench for several elements of e/s FPGA

  Hello

  I'm looking for an example on the creation of a test bench that simulates multiple FPGA of e/s digital lines.

  I went through the tutorial of creation of test benches, but it uses only a single element of I/O.  E/s reading Point Name.vi is obviously an important part of this but I don't know how to structure the VI and assign the name (especially since things seem to get wired upward as if by magic of a single element of IO).

  Pointers to examples would be greatly appreciated.

  Thank you

  Steve

  Hi Steve,.

  Do you mean multiple channels or multiple signals for each channel?  In the tutorial, you have published, you can find the answer for each.

  To create multiple channels, just repeat steps 5 to 9 in section 'Test the FPGA VI on it development with a Custom VI' for your entries and steps 5-7 on the 'Testing out the i/o Item' for outings.

  To create multiple test samples for one channel, you can consult the section "Testing the FPGA VI with a more complex Custom VI".

  Best,

• LabVIEW Unit Test Framework: workaround for forbidden control characters label?

  Hello

  I am using Unit Test Framework of LabVIEW and he tells me that I am not allowed to use the unit as [Celsius] card in my labels of control:

  «Control's label may not contain the following items: \n, \r, tabs, table holders, name and decimal separators delimiters.»

  In the VI under test contain [] or /. »

  Rename these labels is a difficult option for me because the format of the units in brackets is on our company agreements.

  Can anyone think of a work around so that the test framework ignores these labels?

  Thank you

  Peter

  There was an exchange of views on these "Naming Conventions" a general consensus was arrived at, it became obvious that the best methods for the controls and indicators is to use short "Lables" and put to amplify the info in the caption showing the legend on the FP and not the Lable.

  for example

  "Temp".

  "Temperature [Celsius].

  This saves a lot of space BD when buldling / unbundling or using VI Server refs, always give the user all the information they need, and help displays the legend if there is one.  It even allows to change the default value (0) without messing up any type defs.

  In your case the Framwork UT would be happier if you have taken this approach.

• Would it be possible to have 2 shared resources, a local containing all common topics and photos for several projects and another a remote control containing all the topics and pictures for the purpose of collaboration

  Hello

  I was wondering, now that I discovered the benefits of eating of the resource, if it would be possible to have 2 shared resources, a local with common themes and images for several projects and another one, remote, containing projects together, i.e. the subjects and images, for collaboration purposes.

  The only local, I intend to use it for my purposes to have common points (topics & photos) update of all projects where they appear and the distance that I intend to use it with remote colleagues, who might want to make changes in the topics.

  This would mean that the topics and current photos will be present in the resources, one local as one remote.

  Thank you.

  SVN is not a source control package?

  I'm not sure, but RoboHelp * MAY * be able to integrate with SVN to control projects and sharing.

  RoboHelp comes with RoboSource Control that could be used to provide the source code control. But if you already have a package in place, my thought is why reinvent the wheel? Simply use what is there.

  See you soon... Rick

• best type of measure daqmx for several closed loop control system

  Hello

  I wonder what kind of type of measure daqmx which are suitable for the control system of closed loop with control about loop 128?

  I design unique loop with continuous sample and sample application. The two correct answer. But I don't know if the control loop number increases.

  Another question is, clock synchronization of time needed for such a system?

  taov,

  I recommend you to use continuous sampling because it is time of material while on demand collection is software time.

  As for the RTOS system, please see this link.

  CarmenC

• Slider for f4v files control

  I made a portfolio site with a bunch of movies of the turnovers of 3D models, I built:

  http://www.mickposch.com/high_poly/high_poly_drums.htm

  Currently, movies are all Quicktime. But on 64-bit operating systems, the cursor - it just looks like a black bar. So I want to redo all the videos as F4V files. The problem is, unlike with QuickTime Player, there is no simple way to create a slider (if the user has not the possibility to rotate the models, the site is pretty useless!)

  So, the question: a way to create a decent slider for F4V files embedded in a html page? So far, I have tried the Sothink media encoder (allows you to build a slider large swf that can reference a FLV, but it doesn't seem to work for F4v), Moyea Flash video MX (can encode a F4V and SWF player with slider, but the slider is crap) and Adobe Media Encoder (can encode the F4V, but does not address creating a cursor.

  Any ideas?

  Hello

  No, but what I mean is that you need a streaming server, which can already installed your server provider. The link to the media server has to reference the differences between progressive and streaming with regard to the flash player. Yes, I agree that quicktime is preferable in this respect, as the streaming is the default with quicktime. The problem with the flash player, is that even when the flv file is completely downloaded the cache for the reader can't (and often isn't), contain the flv file complete, so that the slider will not work (as you have), even if the flv file played once completely.

  PZ

• Slide with several digital poster Down filter event Bug button?

  A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

  A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

  A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

  It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

  A vi and a printscreen are attached.

  The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

  Or someone has a better solution and explanation?

• Test bench for myDAQ

  Hi all

  I'm designing a test bench for myDAQ, I implemented using a test of VI for each function in the model of test bench and in the end, I write all these results in a word file. In fact, there is not any specific problem I want that the community please check this test if it needs any improvement specifically to report.

  Thanks in advance for your help and time.

  Concerning

  Omer

  To see a picture (or save) in the largest size, just right click on it with your mouse and click on the first option in Firefox (see the photo or something).

  I am also attaching the control of typedef in 2013 version. BTW, you should use a project, LabVIEW, for your main VI and typedef controls in one place.

  For example, if adding items to your control of the typedef:

  

  Unbundle the cluster for the creation of report:

  

  EDIT: finished the missing parts and wires for your VI.

• Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

  Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.

  Hi Sailortdt,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it looks like you are facing a problem with network connectivity.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• I used Paperport 9SE for several years without any problems with XP. Now, because of a forced computer upgrade, I have Windows & OS. Now I find that I can't "save under" or "send to" Word.

  I used Paperport 9SE for several years without any problems with XP.  Now, because of a forced computer upgrade, I have Windows & OS.  Now I find that I can't "save under" or "Send scanned documents to ' MSWord' as suggestions?

  Hello

  Is Microsoft Office (Word) installed on the new Windows 7 operating system?

  If this isn't the case, install Microsoft Office must fix.

  If Microsoft Office is installed, try Microsoft Office. Follow these steps.

  a. click Start.

  b. click on Control Panel, programs and features.

  c. find Microsoft Office.

  d. right-click on Microsoft Office and select Repair.

  Now, check the question.

• How to config a cache shared for several environments with the C API

  How to config a cache shared for several environments with C API?  Like Java edition. Chapter 2. Database environments

  I want to open the large number of databases, at least 10,000. But as the counties of open databases increase, the db-> open become very slow operation. It took almost 2 hours for 10 000 databases.

  So I try to distribute these databases on multiple environments (for example, 5 envs). And to improve the efficiency of memory use, I want to share cache between ENVS.

  Hello

  We do not support the cache sharing between different environments as you mentioned.

  We have tested the case of the opening of 100 000 databases, see the number that you have encountered, we will check what is happening.

  Kind regards

  Winter, Oracle Berkeley DB

• Get the names of collections for "emctl control agent runcollection" - command

  Hello

  I have a very simple question, but so far I have not found an answer by myself.

  For the moment, I test a lot with the provision of software and databases with cloud control.

  When I install an agent on a new machine commissioning, target that it takes about 15 minutes (the metric collection schedule) to cloud control knows all about this host. (OS version, etc.)

  Provisioning will fail before control cloud knows this information due to several controls.

  So, I wanted to run the collection of this information manually. Oracle Support told me to run ' emctl control agent runcollection < target_name >: < target_type > < collectionName > ' on the target machine or an agent.

  So far so good, but how to get the correct name of the Collection? (for example, I want to find out the information on the host that you see when you access a guest house in the configuration of the section on the left side... Size (MB) memory system, File System (GB), operation)

  So far, I wasn't able to find the names of correct perception in MOS or in the documentation.

  Oracle® Enterprise Manager framework, host and Services metric Reference Manual

  12 c Release 1 (12.1.0.2.0)

  Part number E25162-04

  http://docs.Oracle.com/CD/E24628_01/EM.121/e25162/host.htm#BABIBAHD

  Thank you and best regards,

  Martin

  If all you want to do is force the collection of host configuration, you can easily do it through the user interface. Since the host Host Configuration page-> last collected. In the menu actions, select Refresh. This performs all configuration immediately collections and downloads it to the repository. It will immediately appear in the user interface.

  You can also do this for 1 or several hosts at once by going to the company-> Configuration-> host to refresh Configuration...

  No need to mess with the agent...

  Hope this helps,

  Dave

• SQL or PL/SQL-&gt; check a grouping of several criteria in the same group.

  Hello
  
  Oracle 11g. I need to check a set of data for multiple filtering criteria together. If the criterion is found, the FLAG_SET is updated.
  
  The example data:
  

  MEMBER     |     GROUPING             |     CODES     |     ROW_NUMBER     |     FLAG_SET
  001          |     1               |     A          |     45               |     0
  001          |     1               |     B          |     48               |     0
  002          |     1               |     C          |     45               |     0
  002          |     1               |     C          |     49               |     0
  002          |     1               |     A          |     52               |     0
  002          |     2               |     A          |     43               |     0
  002          |     2               |     B          |     62               |     0
  002          |     2               |     B          |     63               |     0
  003          |     1               |     A          |     72               |     0
  003          |     1               |     B          |     76               |     0

  My requirement is to test if a MEMBER within a GROUPING has an 'A' and 'B' (although there are several criteria to test on for example.) "C" and had "and they are prioritized. I would test a game both in a called proc).
  
  I need the following output:

  MEMBER     |     GROUPING             |     CODES     |     ROW_NUMBER     |     FLAG_SET
  001          |     1               |     A          |     45               |     1
  001          |     1               |     B          |     48               |     1
  002          |     1               |     C          |     45               |     0
  002          |     1               |     C          |     49               |     0
  002          |     1               |     A          |     52               |     0
  002          |     2               |     A          |     43               |     1
  002          |     2               |     B          |     62               |     1
  002          |     2               |     B          |     63               |     1
  003          |     1               |     A          |     72               |     0
  003          |     1               |     C          |     76               |     0

  I can't just update the indicators if a single 'A' CODE is found. He must have the 'A' and 'B '.
  I tried several ways, most recently LISTAGG put all grouped values of each line and the string for CODE analysis, I lose the ROW_NUMBER when this happens but it cannot be part of the coiled LISTAGG.
  
  Someone at - it ideas?
  
  Published by: chris001 on November 28, 2012 13:33

  Hello

  You can do it with a MERGE, something like statement:

  MERGE INTO table_x     dst
  USING   (
           SELECT    mmbr     -- MEMBER is an Oracle keyword
           ,           grpng     -- GROUPING is an Oracle keyword, too
           ,           CASE
                          WHEN  COUNT ( DISTINCT CASE
                                                WHEN codes IN ('A', 'B')
                                     THEN codes
                                    END
                            ) = 2
                   THEN  1
            --       WHEN  ...
            --       THEN  2
            --       WHEN  ...
                   ELSE  0
                      END
           FROM      table_x
           GROUP BY  mmbr
           ,           grping
       )          src
  ON     (   src.mmbr       = dst.mmbr
       AND src.grpng       = dst.grpng
       )
  WHEN MATCHED THEN UPDATE
  SET     dst.flag_set     = src.flag_set
  WHERE     dst.flag_set   != src.flag_set
  ;
  

  According to your needs.
  If you would care to post CREATE TABLE and INSERT to your sample data (as it exists before the changes), then I could test this.

  You have not need PL/SQL for this, but, if you need to do it in PL/SQL for some reason, you can.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  If you ask on a DML statement, such as UPDATE, the sample data will be the content of the or the tables before the DML, and the results will be the State of the or the tables changed when it's all over.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

  Published by: Frank Kulash on November 28, 2012 16:53

• How do you check mysqli_numrows ($result) for lines nil?

  I tried a query in PHPmy admin for a single record, and he returned

  0-0 1 lines total.

  Did the same for a nonexistent record and it came with zero results (empty)

  So it seems you need to do some math to whow several lines, there is, as it seems to return 0 when there is only a single record and 0 when there is none.

  How do you check mysql_inumrows ($result) for zero rows returned?

  Its maybe related to the fact that save shots start at 0.

  H Walker

  I don't use mysqli, but you should be able to do the following:

  If (! mysqli_numrows ($result) {})

  no lines have been returned

  }

  You're right PHPmyAdmin starts its numbers of transfer line with zero, not 1, so if there are 25 lines, they are listed as 0-24 lines, mysqli_numrows reports the sum, so it takes 1, not zero.

  Brégent, according to me, he was just using PHPmyAdmin to test his query.

• I tried for several days to install watchos3 without success.

  I have an Iphone 6 more ios10 running and a 42 mm apple watchos2 sport watch running (2.2.2).

  I tried for several days to install watchos3 without success.

  I have so far:

  Restarted my iphone and restarted my Apple Watch and tried again

  Removed the download of the update of the software > its use on the Apple Watch app and tried

  I reset all the settings on my watch and re-paired and tried

  The question is after the download on the screen of the software update is about 2 days left, he never moves forward.

  Still me have running overnight (twice) and ensuring that they are close to each other and connected.

  Any ideas what to do next?

  < re-titled by host >

  Hello

  Check that your iPhone is connected to the Wi - Fi (rather than the cellular data) and that you follow all the other steps here:

  Update the software on your Apple Watch - Apple Support