Slideshow and multi-project

Similar Questions

• First film edited with Premiere - proxy, audio questions and multi-cames

  I have several questions that I have not found in the videos and forums, at least not for my situation. I'm finishing the revision of sequences now adding comments in prelude and will begin soon to change it. Please excuse the long post.

  Background:

  I'm working on my first film, a documentary. Most of my work is 10-11 interviews, about an hour each. The majority is 4K Panasonic GH4, but some of the images is an Olympus MDGS EM5 II 1080.

  I recorded the sound using a LAV and a shotgun microphone, each goes in its own channel in a Tascam DR - 70 d, an external audio recorder, with a line going into the camera for reference. Audio and video files (at least one, since GH4 brings several) will have a slate tone to the head, created by the audio recorder. The recorder has captured the audio 24-bit, 16-bit audio captured camera. The recorder fooled also two other channels to lower 12db audio in the case of audio peaks.

  I will be changing on Mac laptop - 2013 MacBook Pro, OS 10.11.5, 2.9 Ghz Intel Core i7 memory of 16GB 1600 MHz DDR3, NVIDIA GeForce GT 650 M 1024 MB graphics card. I think I need to create my images 4 K proxies.

  All images is storage on my external drive of G. The interviews are separated and are located in the folders of each interviewee.

  The final project will be 1080, not 4K.

  Questions:

  Naming - being a hybrid, the GH4 breaks an interview of an hour in several separate files. Should I change the names of all files, or keep them in folders named in Premiere Pro? If I should change them, should I do it before swallowing?

  First synchronize audio and video, but since I have an audio file and several video files, I synchronize each video file individually or assemble them somehow, then synchronize? If each of these excerpts from the interview is sewn together, wouldn't that make editing more easy?

  When you create proxy for video files, also create proxy for audio files separate? Once synchronized, will be presented first the Hi output version of the resolution of the video and audio?

  Multicamera - in one case, I have an interview with two 1080 cameras. But for the rest, I've shot with a camera in 4K, so I intend to use a section cropped interview (zoom) when an important statement is mentioned, simulating a two cameras set up. Given that I have to create a sequence of multi camera after I ingest proxy files, first will be a problem activating/deactivating files proxy for the salvation of the res files?

  B - roll is added later, once the interviews are published about. It will be a few (not 4K) images and photos. Make the proxies of these too or first care to have all files proxy or a mixture?

  Finally, I have never edited a video which has been more than 10 minutes. This film could be of 40 minutes or up to 90. Everything I need to know to make the editing more smooth? I am a beginner!

  Thank you for bearing with me and thank you in advance for any idea!

  -SK

  1. allow only file names.  Make your organization with records (hard drive) and ferries (project).

  2. Manual of multi-camera method

  3. the audio files are small and will not need of proxies.  Export will always use the original media.

  4. possibly.  My first attempt was a disaster that froze the machine so badly, I had to do a hard reset.  However, you need not go back to the original of the sequence to make your cut-ins.  Proxy media will do fine work.  Simply place a copy of the plans at the 50% level in V1 and a second copy on the scale of 100% in V2 when creating the source multicam sequence...  Will allow you to see the full versions and then cropped the multicam editing.

  5. the photos no need of proxies.  If the B-roll change, make proxies for those.  PP not care a spirit to keep all the images the same.

  6. $ 2,000 custom PC vs $ 4,000 Mac Pro - YouTube

• Project failed and the project of packaging is not loaded to the Simulator

  Hello

  Whenever I run the bb Simulator on my Eclipse, it always gives me "Packaging project failed" and my project sometimes appears in the downloads on the blackberry Simulator (even it is not in the package), but most of the time, it says "Module not found" or it is not loaded in the Simulator.

  What is the cause of this problem and how to fix it? Thank you.

  I use the Simulator to 9700 with OS 5.

  Hi all

  I just tried to restart my laptop and it works all of a sudden. I still don't know what the problem was, since there is no error before packing 'failed '. I hope that never, it will fail again.

  Thanks to all for the replies!

• How to set up a multi-lingual and multi-currency site

  I've been reding this article

  How to set up a multi-lingual and multi-currency site to installing a multilingual and Multicurrency site

  I want to know if I have 3 or more areas:

  • www.yourcompany.pt- Portugal
  • US.yourcompany.com - United States
  • UK.yourcompany.com - United Kingdom
  • www.yourcompany.com - China
  • www.yourcompany.fr-France

  do I have to create 5 versions of the site in five different languages?

  Also I have to create five different versions of a product for the corresponding five languages?

  Hello

  Please take a look at the following site,

  Tutorials

  Let me know if you have any question.

• change the copy and upgrade project options

  Hello

  FSCM90 and tools 8.49

  I opened my project in the application designer. On the upgrade tab, I see that the action is EXEMPLARY and UPGRADE is checked.

  Then I run the following text in the database:

  UPDATE PSPROJECTITEM SET TAKEACTION = 0, UPGRADEACTION = 0 WHERE PROJECTNAME = "MYPROJECT"

  
  

  Can I reload the project. But again upgrade tab, I see that the action is EXEMPLARY and UPGRADE is checked.

  
  

  Why update table PSPROJECTITEM dose not change my project in the application, update TAB Designer?

  
  

  Another way to change them without doing it manually?

  
  

  Thank you.
  

  Update of tables via SQL tools is generally not supported by Oracle.

  Both explanations possible, why you do not see your updates...

  1. You didn't do your update before reloading the project.
  2. More likely, since version psprojectdefn was not changed you reloaded the original project from the cache.

  If you run the application using the Designer 2 levels that you can try to clear the cache of your office after running and committing your update sql. If you run in mode 3 levels you need to clear the cache of application server. Do not try to update the version in psprojectdefn unless the Support of Oracle is ready to provide you with the instructions to do it correctly. It requires corresponding updates to multiple tables.

  Note that upgradeaction = 0 corresponds to the action = COPY, so your sql is not really changed this value.

  In addition, if you want to change the action for all the objects in a project you can do easily in any case app designer - open the project, switch to the upgrade tab and open the grid details for any object type, and then either right-click on any object (or select Edit-> update from the main menu) and then set the Action for the project and choose copy or delete.

  You can not change flag for upgrade to a draft set of the designer of the app, but you can change it for all objects of a given type. Open the details for the type of object from the upgrade tab, and then click in the top left box in the grid (next to the heading "key ") to select all, then right click and choose UNTAG ro Tag for upgrade. Alternatively, you can uncheck specific definition types during the copy of the project. If you want to copy the definition of the project without copying the object definitions at all, just click deselect all next to the definition (s) on the database copy Panel (and copy project definition is checked, of course).

  Kind regards

  Bob

• Is it possible to embed a slide show in a slideshow? I use the lightbox slideshow and one of my samples is an e-brochure that I would like the Viewer to be able to get away.

  Is it possible to embed a slide show in a slideshow? I use the lightbox slideshow and one of my samples is an e-brochure that I would like the Viewer to be able to get away.

  As slideshow in Muse Widgets can contain images, it is not possible to place another slide show within a slide show.

  However, you can achieve the desired effect by placing a slideshow inside a widget of composition. The widget of composition also offers lightbox, as well as the possibility of placing any content within their target containers (similar to the hero of the slideshow Image).

  Hope that helps.

  See you soon,.

  Vikas

• CP6: Windows PE and the project are not aligned

  Hello

  I noticed that the Table of contents and the project show (940 x 540) windows are not aligned to each other (1st photo), I wonder why my show is displayed below the table of contents and has a top border of the white page. As a result, playback buttons are completely out of the window if I play equipment in the stand-alone flash player. Despite this the other skin with thinner playback buttons would be perfectly, I received instruction to use the largest.

  If I resize the project, the video is placed in the background, but there is a strange space between panels second pic).

  Is there a way to fix this?

  Thank you.

  

  It's the buggy version. A year ago, a patch was released that fixed several bugs. Please update your version, I think in 6.0.1.240 if my memory number is correct.

• I'm trying to change my slideshow, and the 'Parts' section is grayed out so I can't change the captions on my newly added slides.  How can I change the captions?

  I'm trying to change my slideshow, and the 'Parts' section is grayed out so I can't change the captions on my newly added slides.  How can I change the captions?

  Hello

  In slideshow options, please enable 'Show lightbox parts while editing', under the editing section.

  Thank you

  Sanjit

• Need the difference betwn correct intercompany billing and inter-project Bill

  Hello
  
  Can someone tell me precisely the difference between the billing and the project inter intercompany billing?
  
  The decision which is to be used in the scenraios.
  
  also, what is the difference in level of configuration at a time.
  
  If you have any white paper / document / note in metalink also on this topic, then I'll be very happy to have that.
  
  Thank you very much in advance.
  
  Concerning

  Hello

  Inter project billing may be used in the same business unit.
  Intercompany billing can be used only in operating units.

  Inter billing project means the provider organization is supported a separate supplier.
  With intercompany billing provider organization is responsible for the same project from the receiving organization.

  With inter, project billing provider can charge the receiver in any billing method as any proposed contract. With intercompany billing billing are based on transfer pricing rules which can be applied only to actual expenditures of the Organization of the provider.

  There is a complete list of all the configuration steps in the implementation of projects Oracle guide.

  Dina

• Update 2015.3 is designed to open and use projects from previous versions?

  There is much talk in this forum on the problems of opening and editing of projects created in previous versions. Many personal responses I recommend starting new projects and do not continue with the older.

  Publishers and producers professional re-edit, to update and extract of old projects all the time. Is there final guidance on what projects/features or versions can be reused?

  Bruce

  Hi Bruce,.

  It's giving me advice. You should be able to update any project and it works in many cases, it is simply not advisable on complex projects. For me, it's one with a lot of sequences that contain a lot of cuts, titles and effects. One with many multi camera sequences too. After that compositions Effects connected through dynamic links, media card based instead of footage of codec, etc., intermediate are examples.

  With a backup of the project, such as an automatic backup, you can certainly try it. You can always revert to a previous version to continue working.

  I am a professional editor who happens to work now at Adobe. Personally, I have avoided all projects in all software updates unless I had to. In doing so, I always did so with a backup.

  In general, only update of existing projects after simplify as much as possible and only when you actually need.

  Thank you

  Kevin

• Media player and multi disk sets

  Any suggestions on how to manage entire multi-plate. I can't find a colum for "Disc #" I do not see Custom 1 and custom 2 is it possible to assign one of those disc #.

  Thank you

  Unfortunately, the WMP library does not support the tag (or 'Set' in Advanced Tag Editor) disc number very well. To work around the problem, you can give each disk drive to another title of the Album, for exampleGreatest Hits CD1 and Greatest Hits CD2 . Tim Baets
  http://www.BM-productions.TK

• Not available TWAIN and multi page unavailable

  I have a scanner fujitsu fi6150 can I connect to Remote Scan using the WIA driver but not TWAIN driver. Not necessarily a big deal, but I don't have the ability to select several pages under WIA. The only way I can get around this must apply multi pages.

  My questions are:
  (1) why not TWAIN be available when the TWAIN driver is loaded.
  Why 2) is the disabled multi page option and how can I get around this? Is there an INI setting that I can change?

  Thank you.

  Hello

  Usually if RemoteScan is unable to 'see' a TWAIN driver locally, it's because the TWAIN driver has not been installed or does not work, you can always test it locally in a compatible scanning TWAIN as a Microsoft Office application. You want to speak to problems with the scanner driver Fujitsu himself.

  RemoteScan inherit the functionality of the scanner driver that is used, you will want to check the WIA driver locally (by running a scan in Microsoft PAINT, which is only compatible WIA) to ensure that it with not problems with MultiPage scans. If you are able to do scans multi-page locally with this driver and are having problems with RemoteScan for some reason, you want to call our support team at the 406-721-0276.

  Thank you

• Pro vs ultimate: is the difference of ONLY between Win7Pro and Win7Ult the language support of Bitlocker and Multi?

  I have Vista Ultimate and want to upgrade. It looks to me that Vista Ultimate should be upgraded to Win7Pro if your not using or nededing Bitlocker or a multi-language support. I can only find the compairison simplified feature and it makes me worried that I might make a mistake. Ultimate in Vista has features like support for live wallpapers. Will it be a feature included in Windows 7 Pro version, or what I need to keep on the path of the ultimate.

  In point: Fact Windows 7 Professional have ALL but 2 offers this Windows 7 Ultimate seporate?

  Its combination of things. BitLocker data provide a protection on the disks, internal and external, DirectAccess provides a transparent connectivity to your corporate network.  (requires Windows Server 2008 R2), clerical management reduced time waiting to open the file on the network with BranchCache. (requires Windows Server 2008 R2), prevent from running with AppLocker unauthorized software. In addition, the features that were formerly available Windows Vista Ultimate Dreamscene and Ultimate Extras are no more a part of Windows 7. In addition, you can't keep these features during the upgrade of Windows Vista Edition full of Windows 7, they will be deleted. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• ADF and BPM project link understanding

  Hi all

  His question is very simple, but not for beginners. I have a request which have a BPM and two ADF UI project. Now, the best practice is to separately deploy project UI and BPM. But here I want to know how SOA spear time link between composed of SOA/BPM that deploy us separately on the EM and ADF UI that we deploy on weblogic server?

  Kind regards

  Check:

  http://www.avioconsulting.com/blog/how-task-flow-registration-human-tasks-works

  Its an excellent article to understand how, during the deployment of an ADF UI, it records the human tasks.

  HTH!

• Delete, rename and move projects

  I just created my first video, but I have a bit of a mess on my hard drive. I think I've used to SAVE it AS a command to rename my project once or twice and, of course, I have all files automatically backed up. To make things worse, I think that my project found tangled with some tutorials, that I was working on. It's very confusing.

  I checked these guides...

  How to completely remove a project?

  Delete a project. First Elements

  The instructions look pretty simple - simply navigate to the folder where your files are stored and start deleting. But before I take the plunge, I would like to clarify a few things.

  I would like to firstly, positively ID of correct working project folder. The easiest way to do this would be to rename the file, and then open Adobe Premiere, which should then give me some kind of error message, proving that I correctly identified my work project file.

  Here's the catch: if I can restore the project name of the original file, everything will be OK or renaming to permanently break the connection? I learned how to find assets (for example images) that have moved to a new location; It works even with project files?

  On a similar note, it is possible to move a project file to a new location? My home folder has a project file for a tutorial - Eagles Documentary.prproj but I'm working on the project file is stored in one of the several subfolders. Like I said, it's confusing.

  Which brings me to another question... Once I have identified my current work project file, it is OK to remove EVERYTHING ELSE, including files and folders? I don't remember if one of these files were part of the installation of Adobe Premiere or if they are all legacies of tutorials.

  Thank you.

  First of all, your project will be at the top of the list when you open Premiere Pro

  Second, disk hard use/space problem with Premiere Pro... | Adobe Community contains information about temporary files

  As for your structure and the correct project settings... I have no idea

  In addition, be sure to apply everything you read in a link from Premiere ELEMENTS to Premiere PRO... things may be the same, or they can