Slip the docs causes a freeze! Gah!

Similar Questions

• Flash embedded in the page causes browser freeze and quicktime download prompt

  Hi people,

  This is the Web page in question: http://www.visionone.org.au/sonseekers/about_sonseekers.aspx (Please note this page has audio).

  The problem is that the page - loading, causing the browser to freeze and a prompt box download quicktime to appear (even if sometimes it just seems like gray a box without text). The browser should then be closed via Ctrl + Alt + Delete function. The only way that I discovered it was a quicktime download prompt box, was that I opened the page in Chrome, I think, and he showed the text allowing me to perform the update. If this page works fine for me now.

  This page was working fine until about 3 weeks - I didn't change anything on the page to make it all work differently. Other people have had the same problems, see this page - regardless of what browser they use. It is important that this page is viewable by all, without having them to go through the dramas of installation of a quicktime update thing (or whatever it is). The majority of people visiting this site is not web/computer savvy.

  I think it might have to do with a security setting for Windows Update and the AC_RunActiveContent.js file that references the flash embedded in the page. I have been searching google for the past few hours and found nothing even remotely close to help solve this problem.

  Someone at - it had a similar problem and found a solution? Or if someone has an idea how solve this problem, that would be much appreciated.

  Thanks in advance.

  Hello

  The page does not freeze in firefox 3.62, but I got the guest of quicktime which is caused by the use of quicktime as the MP3 at the bottom of your code.

  It has nothing to do with the AC_RunActiveContent.js file.

  PZ

  www.pziecina.com

• When I search Google and the page opens, it freezes showing he is transferring. Also when I try to access my e-mail yahoo the same thing happens. I uninstall Ver4 beta. and re install 3.6 until you guys will find solution to this

  I clicked on the yahoo mail, it opened the page but then freezes showing what it it still happening.
  Same thing happens when google page open for research.

  You have McAfee Site Advisor installed, which increases because of problems especially with Google. If you try to disable it to see if Firefox works. Alternatively, you can try to install the latest version (3.3.1) of the Site Advisor, one has to work.

  Mozilla plan on blocking older versions of McAfee Site Advisor Firefox 4 due to the problems they cause.

• Messages on Mac next to the doc icon

  I've not turned my phone of iMessage. Why is the message bubble appear on my desk next to the extension of the doc that I open your messages on my iPhone?

  I have iMessage disabled on my iPhone and this just started happening recently.

  Every time I get a message or open a new one to send that the bubble appears to the left of the doc. How can I get this to stop?

  Thank you.

  OS X El Capitan

  Hello

  I'm not sure that I understand very well.

  On Mac, there is a Bar with many icons pinned App to called the Dock.

  On the iPhone, the app is called Messages and it can be turned on to do iMessages and SMS.

  The Mac version is also called Messages, and by default the icon FRO the application appear in the Dock.

  I'm not sure that you don't talk to a doc (MSP) that is called "overtime".

  I'm not sure why this causes to start then Messages on the iPhone If you do not use.

  IF you previously dragged the Messages out of the Dock icon and open the Messages in the folder of the Application, the icon still appears in the Dock as all open applications even if they are not in the Dock normally.  They will disappear when the application is closed (Quit)

  

  20:31 Monday; February 22, 2016

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• PCI-8335 (MXI-3) when the fiber is connected to the map PCI8335-> PC freezes

  When I connect the fiber on the map of PCI8335, the Tower Mini of PC DELL Vostro 220 Desktop freezes (software, mouse, keyboard)
  If, during startup, the fiber is not connected, the PC starts and everything works normally (with the exception of the communication and the application of National Instruments because the fiber is not connected)
  If I plug the fiber when the PC is completely started, 2 bright LEDs; then when I run the application, MX-3, the PC freezes.
  Map of the PCI-8335 is down or is this another problem? Thanks in advance for your help.

  Hi all

  The installation still work since my repair on 10 September 2015. After that analysis with National Instruments France, the likely cause of the failure is that, during a power outage (storm or stop because of the fire detection device) the remote PXI chassis stopped but not the PC because it's on the inverter.

  / ! ------PXI / PCI chassis should be launched before the PC; order to operate the 2 switches in the chassis does not matter.

  During my last speech (10 September), I so reset the chassis and restart the PC after the chassis (IE in the correct order) and since everything is working. This is the solution.

  If this tutorial may be useful to others...

• ABC causes system freeze

  I would be very grateful if someone could please tell me how to troubleshoot the cause of a system freeze.

  After that a BSOD caused by the premature elimination of a DVD of my d: drive, a program that I use frequently, ABC, was originally a complete system to freeze any moment, I try to run... it is Exact Audio Copy, a program that allows you to burn a cd, content analysis of files for loss/lossless music.  The only way to address the gel is through reboot cold.

  Here are the steps that I took so far... and maybe this will give you an idea:

  1. I uninstalled, but when I tried to re-install it ALSO caused a freezing of the system.

  2. in Safe Mode, I was able to reinstall them and run the program without problem.

  3. after the installation in Mode safe, but chasing after systematic startup, the system froze.

  So, I assume that there is a driver conflict...

  EventViewer does not seem to grasp the issue... nothing showed up.

  Are there other ways to understand the question?

  I am running XP Pro SP3, all the installed updates, on a Dell Vostro 220 s computers.

  Thanks a lot if someone can help me with this.

  Pter

  Just note if EAC still causes crashes while all other programs/processes are not running. If this is the case, then it has a bug or there may be a problem with one of your drivers. If there is no blocking, systematically add pack programs/process until there is a blockage. Essentially, you need to use the process of elimination until you isoliez the villain.

  Start by adding half back and then see if there is a blockage or not. You'll understand!

• PC freezes and work the next day and freezes again...

  My dell dimension 4700 with windows xp computers crashes often, and the keyboard/mouse both work, forcing me to unplug the computer. This usually happens after no more than an hour of medium/light use, so he does not start correctly and freezes on the splash screen or a screen of welcome for the rest of the day and the next day he again works for an hour and repeat the cycle.

  I have many important things on the computer and it is the only computer I can access easily, how to fix?

  So, if I am understanding correctly, you experience this problem with safe mode too?

  Try the following steps to see if the problem resolves

  1 restore the PC to an earlier date.

  2. make Hard Reset

  Here's how to do a hard reset

  1. turn the computer off completely

  2. unplug the code of the power supply to the back of your computer and make sure that there is no source of energy from the computer

  3. remove all cables plugged in to your computer, including the keyboard and mouse.

  4. press the power button on your computer for 30 seconds, you could see the power light flash and go

  5. reconnect the power cable, and the mouse and key board

  6 turn the computer and watch her for an hour or two.

  7. If the computer does not freeze, taken in the other device, one at a time, please wait a few minutes between plug questions to make sure that the connected devices will not cause this problem.

  If this resolves the problem, you can save all your files to an external storage device and recover the computer completely.

  If the recovery does too much help, this indicates that there may be a hardware failure, most often, the sticks of memory can cause this problem or the processor, and it would be a good suggestion for the service computer.

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2

• Under Vista, after doing the update of Windows, affected by the half second periodic freezes

  Vista Home Premium SP2 with all updates.

  For about a week now (since the last round of updates or more) my GUI everything will freeze.  The mouse stops, all text I type stops, and can contain any game I'm running.  This happens regularly (but not constantly) and co incident with the HD LED blinks on the front panel (sometimes).

  When I open the Task Manager and moving to different charts, I see normal activity of the CPU to 1%-4% suddenly spike to 50% very briefly.  That's when the freeze happens.  It doesn't happen all the time however.  I see a lot of services are popping up with increased use of the processor but have not been able to establish a correlation between those to whom they are.  Most of what I see are simply "svchost" which basically can be anything.

  My normal operating mode must have three elements running: Firefox, Thunderbird, and MS Live Messenger.  Individually and together, none of them appear to be involved, although I thought that maybe one, or more, can be simply "looking for things.  Even without anything going (all programs closed), I can slowly be the mouse on the screen and detect the second gel front of "catch-up".  This, I suppose, tells me that the mouse is still playing, but not moved to the screen.

  Similarly, if I change a Word document, or a text file, my typing stops at the screen, but when the freeze is finished, it "catches up".  However, if I beat the exit screen more of 5 or 6 characters, they get missed completely (I'm a fast typist).

  Anyone can shed some light on this?  It happens to someone else, or is it just me?

  Bill

  We seem to have some confusion in terminology. The program from Sysinternals which replaces the task manager's Process Explorer. With that, I would like to keep an eye on interrupts and deferred procedure calls that would indicate a driver problem. Process Monitor gives you a trace of all the system calls that can help find what's going on just before and after the frost. You cannot set to stop on a trigger. There is another tool Sysinternals, ProcDumpTechNet.Microsoft.com/Sysinternals/dd996900,http://technet.microsoft.com/en-us/sysinternals/dd996900 , that allows you to perform a dump when certain events occur. You then can it analyze with the debugging tools for Windows. Here's an example of it in action: http://blogs.technet.com/b/markrussinovich/archive/2010/08/24/3351213.aspx .

  To cause a freeze something must either be maxing out carrots time allowing anything to pre-empt it rather than holding on to a resource which prevents anything else running. For me, the most likely cause would be a pilot.

• HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

  HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

  I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

  Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

  My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

  OJ8500_A910_1315 - 1.exe

  HP Print and Scan - HPPSdr.exe doctor

  HPSupportSolutionsFramework - 11.51.0049.msi

  All versions were last uploaded on 4 April 2015.

  I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

  The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

  I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

  I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

  This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

  Help?

  Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

  It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

• Power of Microsoft service and MMCSS causing startup freeze

  I have Windows 7 set to automatically download updates from one day to the next.  He downloaded a few of the latest updates (lot of September), I installed them, and then the computer started to freeze during startup... it would lock up just before the login screen.

  I went into safe mode and has a restored system.  Which corrects the problem.

  Then again downloaded and installed updates.  I woke up in the morning to find my computer frozen during startup, just like before.  So I tried to do a restore of the system, just like before.

  This time, the system restore did not work.  And after that, I couldn't even in safe mode... the computer freezes even when in safe mode.

  Then I booted from the CD with Windows 7 and tried a restore of the system in August.  Who has not fixed the problem... the computer always locked up at startup.

  Then I was the restoration of the image around August 20.  Who not has not yet fixed the problem.  I was able to get into safe mode now, but the computer still froze when I would start normally.  This has never been a problem before the latest updates of September.

  I then reduced what services were originally the lock upward.  It turns out that if I turned off the power of Microsoft Service, my computer should start normally.  Alternatively, if I disabled the Multimedia Class Scheduler service, my computer should start normally.  But if I have these two services running at the same time, then my computer hangs at startup.

  Right now I have the MMCSS off, but I can not all the sounds from my computer because of that, and the Windows Audio Service does not work.

  Now I'm in a situation where I don't know how to solve this problem.

  Hello
   
  
  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
   
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
   
  Method 2.
  Try to update the audio drivers to verify.
  Update your sound driver in Device Manager:
  a. Click Start and then click Control Panel
  b. click on system and Maintenance
  c. under Device Manager, click on devices and equipment display
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  d. expand sound, video and game controllers
  e. right click on your Audio Controller, and then click Properties
  f. Select the driver tab
  g. click the Update Driver button.
  h. Select the option automatically search for an updated driver
   
  Windows will now look for an update for your Audio drivers locally and on the internet and then will guide you through the process of installing the driver.
   
  For more information see the links below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Automatically get recommended drivers and updates for your hardware
  
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The first program monitor freezes

  Hi, I use first and after 10 minutes, the program monitor suddenly freezes. I can't press the play button. I can select clips on the timeline, access the menu, import a film, move the cursor, but cannot press the play button. If I wait 5 minutes I can press play again, but that there is only sound and the image on the monitor of the program becomes red (like the 100% red color).  After windows restarts takes it place problem after 10 minutes. My pc ram and processor are used by 10%, and I use the SSD for images.

  So I just reinstalled first and realized that I have did not have the latest version. I have the last cc first I opened the project and waited until that all the media has been loaded.

  And now all adobe first freezes...  I can only use ctrl alt delete to close...

  Should I format my pc everything? I use windows 8.

  I understand what caused the problem. It was a corrupted file footage

• common causes for freezing?

  Hello

  
  My code sometimes causes Flash Player to freeze so bad, that I have to kill the host application or stand-alone player. I don't know where to start troubleshooting.

  I suspect the following:

  -dynamic generation of tween objects that are pushed on the tables to avoid the garbage collector; memory problem?

  -an unparalleled amount of add/removeEventListener

  These are my only clues.

  What are some common causes for freezing Flash Player? I have confirmed that it is not related to video drivers or the OS.

  Any help is very appreciated.

  zestwan

  Throughout my experience working with AS2/AS3, the known causes were:

  Bad code written

  Poor application design

  Operation garbage collection performed poorly or not at all

  Improper performance of XML

  Poorly written TimerEvents and eventHandlers (but they are very easy to catch)

  I think that if the developers get in the habbit of debugging since the beginning, he would help them identify the pitfalls and issues way ahead.

• macOS Sierra installed ok, but the keyboard and mouse freeze after a short use.  Does anyone else have this problem?

  I'm running a MBP 17 "(fin 2011) with CPU i7 2.5 GHz, 16 GB of RAM and an SSD 1 TB for storage."

  El Capitan has worked well and all updates have been applied.

  Sierra (production, not beta) installation went without a hitch.  However, after using Siri and some other applications (which I closed), I opened and used Pages (also just improved).

  After about 15 minutes, the bluetooth mouse has frozen, then froze the built-in trackpad and keyboard.

  I gave her a few minutes in the case where it is clear.  I have consulted the page document to my iPad and it updated on the MBP display.

  Finally he needed a hard reboot with the power button.

  I had to restart twice this way, but was running a different application when he stopped on occasion earlier.

  Anyone had this happen?

  Hello crashsite2,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to maintain your Mac and run as expected and I want to help you get your keyboard and the mouse works again.

  Whenever we see the same behavior with freezing equipment it can help reset the management system (SCM) controller on your Mac.  The control help SMC and regular systems of different hardware and connection on your Mac. Take a look at the article below to know how to reset:

  Reset the management system (SCM) controller on your Mac.

  If the behaviour continues or if you encounter difficulties, the entire community is here to help.
  Best regards

• Graphic of alias created for the folder is not transferred in the doc.  Everything in batteries.

  Graphic of alias created for the folder is not transferred in the doc.  Everything in batteries.  Done in PS and saved as a JPEG.  I did a lot.  not sure why it does not work now.  These are records that have elements in them and it only shows the stacks of items in the folder in the doc.

  ideas?

  control, click the icon in the Dock and have her take > folder