Slow parallel with DAQ loops

Similar Questions

• inductive proximity sensor with DAQ

  Hello world

  I'm planing to connect my inductive proximity sensor with DAQ of NOR-9215 but won't be sure this thing work perofectly. Also I do not know how to connect my sensor with the BNC Terminal.

  The sensor that I use is Automation direct AM9-05-1A with a voltage of 10 to 30 VDC and output voltage of 0-5 VDC range.

  I want DAQ to monitor my output signal of the sensor.

  It seems that you have two choices.

  1. cut the connector from the sensor and cable drivers appropriate for a piece of coaxial cable with a BNC connector plug (and separately to the power supply).

  or

  2. get a socket that fits the plug sensor cable and its terminals to wire to a coaxial with BNC Plug cable and power supply.

  Lynn

• PCIe-653 x with DAQ traditional

  Hello

  We want to update some of our network using a PCIe-6536. Is it possible to run this card with traditional NIDAQ?

  Does anyone have experience with the PCIe-653 x with DAQ traditional. Or is it only possible to run this card with DAQmx?

  Greetings

  Oliver

  Hi Oliver,.

  PCIe cards not are usually not supported by the old traditional DAQ driver.

  In any case, you should consider updating your application to DAQmx as TRANS. data acquisition support is quite limited (see also the official statement of OR below)

  "Caveat ".  NOR-traditional DAQ
  (Legacy) is an older driver with the obsolete application programming
  interfaces
  (API) for the development of acquisition data, instrumentation and control
  requests for former of National Instruments DAQ devices. You must use
  NOR-DAQ traditional (old) that in some circumstances. Refer to the
  File Readme of NOR-DAQ for a glimpse of the two API NOR-DAQ, the
  benefits of
  NOR-DAQmx and more information about when to use NOR-traditional DAQ
  (Legacy)
  including a complete list of devices supported, operating systems,
  application
  versions of the software and the language versions. You can install the most recent
  version of
  NOR-DAQmx software, available at ni.com/downloads.
  "

  Kind regards
  Bernd

• Machine condition with timed loop?

  Hello world

  Is it possible to have a state machine with timed loop? i.e. on the last State, wait us here until the end of the period to return to the initial state again.

  Thank you

  crazycompgeek wrote:

  Hello world

  Is it possible to have a state machine with timed loop? i.e. on the last State, wait us here until the end of the period to return to the initial state again.

  Thank you

  Yes.  However, when the loop is running, there is no way to stop the program or do any other action.  But if this is what you want, yes it is possible.

• When will come out parallel with a new update to work with Apple OS Mountain Lion

  When will come out parallel with a new update to work with Apple OS Mountain Lion

  Since it is an Apple product, contact Apple.

• PC running slow increadibly with 128 MB of RAM - recommended to increase the RAM

  Original title: pc running slow increadibly with 128 MB of RAM

  My mother's PC runs incredibley slowly.
  After you perform a clean installation of win xp and addition of firefox, and avast antivirus, pc still increadibly slow.
  His laptop is a HP Omnibook xe4100 and has 128 MB of ram.
  What I do need to update the ram of the laptop computer or is the problem of something that can be fixed with software recording cleaning?
  Thanks for any help on this!

  If you did a clean install, it is not the registry slow down your computer. A clean installation removes all and back windows on the system with just windows files, so the registry is only what is absolutely need to run.

  128 MB of RAM is incredibly low, so even if the slowness is caused by something else, you should buy more in any case, because it will help the computer a little.

• Slow WiFi with Broadcom 4322

  After upgrading my laptop HP DV7 with Windows 8, I found my wireless connection was extremely slow. My card is a Broadcom 4322AG. This seems to be the same problem as has been in the forum

  
  Slow WiFi with Broadcom 4322 and Windows 8 CP.

  Following the advice in this forum, I changed to TKIP AES security and everything seems to work properly.

  Thanks a lot for sharing your solution! My problem was that I downloaded at least 1 Mbit/s and transferred approximately 15 Mbps. Then I changed to TKIP, just as you said and now I'm moving 21 Mbps of download and 19 Mbps downloading. All this on a MacBook 5.1 :)

• End of Cup Video Clip off the power when send you first Pro CC 2014 to effects after 2014 CC and I slowed down with Timewarp?

  When I send a clip from Premiere Pro CC 2014 to after effects CC 2014 and I slowed down with Time warp the clip cut of 75% at the end of the video and display only the first 25% slow.  How can I fix this and how I round it travels in first pro to play the FULL slow motion video clip?

  Try adding effect temporal Deformation on an adjustment layer in AFX, rather than on the video it self.

• Extremely slow performance with Radeon HD 7870

  Hello

  I use a number of Adobe programs on my new 64 bit system of Windows 8, with 16 GB of ram, a processor Intel Core 2.67 ghz i5 and AMD Radeon HD 7870 2 gig. All programs (including After Effects and Illustrator) work very well with the exception of Photoshop CS6 64 bits, which is extremely slow performance with GPU to use enabled in my preferences (Photoshop selects by default). If I disable the graphic processor use, this slowdown faints. If I change the Basic Design Mode, there might be a slightly detectable improvement during Normal and advanced, but it is still horribly slow. The refresh rate seems to be only a few frames per second. Everything is slow: brushes, zoom, panoramic, as well.

  I tried changing the settings I've seen suggested elsewhere: I went 2 level of Cache, history says 10 and the size of the tile to 128 k. No effect. Photoshop is currently the default using 60 percent of available ram. Efficiency has remained 100% overall of all my tests. In addition, this slow performance touched me from the moment that I installed Photoshop; It didn't arise after previous good performance. The problem exists regardless of the size or the number of documents that I opened. Performance is always terrible, even when I create a new blank canvas of 500 x 500 pixels and try a simple task like drawing with a brush.

  Photoshop is perfectly up to date, and so are my graphic drivers (Catalyst version 13.1). Any help would be greatly appreciated; yet performance is so bad in Photoshop it is unusable, graphic acceleration activated. Thanks in advance for the answer.

  Information on the system of Photoshop:

  Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00) x 64

  Operating system: Windows 8 64-bit

  Version: 6.2

  System architecture: Intel CPU Family: 6, model: 14, Stepping: 5 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2 FP

  Physical processor count: 4

  Processor speed: 2665 MHz

  Built-in memory: 16379 MB

  Free memory: 13443 MB

  Memory available to Photoshop: 14697 MB

  Memory used by Photoshop: 60%

  Tile image size: 128K

  Image cache level: 2

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  OpenCL Version: 1.2 AMD - APP (1084.4)

  OpenGL, Version: 3.0

  Texture size video Rect: 16384

  OpenGL memory: 2048 MB

  The video card vendor: ATI Technologies Inc.

  Renderer video card: AMD Radeon HD 7800 Series

  Display: 1

  Limits of the display: top = 0, left = 0, low = 1080, right = 1920

  Video card number: 2

  Graphics card: AMD Radeon HD 7800 Series

  Driver version:

  Driver date:

  Video card driver: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

  Video mode: 1920 x 1080 x 4294967296 colors

  Legend of the video card: AMD Radeon HD 7800 Series

  Memory: 2048 MB

  Video card: 1

  Video card: driver Microsoft Basic Render

  Driver version: 9.12.0.0

  Driver date: 20121219000000.000000 - 000

  Video card driver:

  Video mode:

  Legend of the video card: rendering driver Microsoft Basic

  Video card memory: 0 MB

  Serial number: 90970078453021833509

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

  Temporary file path: C:\Users\RAFFAE~1\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  C:\, 931.5 G, 534,8 free G

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Installed components:

  ACE.dll ACE 2012/06/05-15: 16: 32 66,507768 66.507768

  adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012

  AdobeLinguistic.dll Adobe linguistic Library 6.0.0

  AdobeOwl.dll Adobe Owl 2012/09/10-12: 31: 21 5.0.4 79.517869

  AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471

  Adobe AdobePIP.dll 7.0.0.1686 product improvement program

  AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661

  adobe_caps.dll Adobe CAPS 6,0,29,0

  AGM.dll AGA 2012/06/05-15: 16: 32 66,507768 66.507768

  ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56

  aif_core.dll AIF 3.0 62.490293

  aif_ocl.dll AIF 3.0 62.490293

  aif_ogl.dll AIF 3.0 62.490293

  Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000

  ARE.dll ARE 2012/06/05-15: 16:32 66,507768 66.507768

  Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830

  AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830

  Bib.dll BIB 2012/06/05-15: 16: 32 66,507768 66.507768

  BIBUtils.dll BIBUtils 2012/06/05-15: 16: 32 66,507768 66.507768

  boost_date_time.dll product DVA 6.0.0

  boost_signals.dll product DVA 6.0.0

  boost_system.dll product DVA 6.0.0

  boost_threads.dll product DVA 6.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.1.0.20577 2.1.0.20577

  CoolType.dll CoolType 2012/06/05-15: 16: 32 66,507768 66.507768

  data_flow.dll AIF 3.0 62.490293

  dvaaudiodevice.dll product DVA 6.0.0

  dvacore.dll product DVA 6.0.0

  dvamarshal.dll product DVA 6.0.0

  dvamediatypes.dll product DVA 6.0.0

  dvaplayer.dll product DVA 6.0.0

  dvatransport.dll product DVA 6.0.0

  dvaunittesting.dll product DVA 6.0.0

  Dynamiclink.dll product DVA 6.0.0

  ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082

  FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433

  filter_graph.dll AIF 3.0 62.490293

  hydra_filters.dll AIF 3.0 62.490293

  icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  image_compiler.dll AIF 3.0 62.490293

  image_flow.dll AIF 3.0 62.490293

  image_runtime.dll AIF 3.0 62.490293

  JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  LogSession.dll LogSession 2.1.2.1681

  mediacoreif.dll product DVA 6.0.0

  MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174

  msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6910

  Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CS6 CS6 Photoshop.dll

  Adobe Photoshop CS6 CS6 plugin.dll

  PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383

  Adobe Photoshop CS6 CS6 PSArt.dll

  Adobe Photoshop CS6 CS6 PSViews.dll

  SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082

  ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082

  svml_dispmd.dll Intel (r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 12.0

  TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24

  WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112

  Required plugins:

  3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Accented edges 13.0

  Adaptive wide-angle 13.0

  Angular Strokes 13.0

  13.1.2 on average (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Bas-relief 13.0

  BMP 13.0

  Camera Raw 7.3

  Chalk and charcoal 13.0

  Charcoal 13.0

  Chrome 13.0

  Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 clouds (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  COLLADA 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Halftone color 13.0

  Color pencil 13.0

  CompuServe GIF 13.0

  Pencil tale 13.0

  Craquelure 13.0

  Crop and straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Crop and straighten Photos filter 13.0

  Hatch: 13.0

  Crystallize 13.0

  Cutting 13.0

  Features dark 13.0

  Deinterlacing 13.0

  DICOM 13.0

  Difference clouds 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Glow 13.0

  Move 13.0

  Dry brush 13.0

  Eazel acquire 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Embed watermark 4.0

  Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Extrude 13.0

  FastCore 13.1.2 routines (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Fiber 13.0

  Film Grain 13.0

  Gallery of filters 13.0

  Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Fresco 13.0

  Glass 13.0

  Scarlet contours 13.0

  Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Grain 13.0

  Graphic pen 13.0

  Halftone Pattern 13.0

  HDRMergeUI 13.0

  IFF Format 13.0

  Outlines in ink 13.0

  JPEG 2000 13.0

  Flattening coefficient 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Blur of the lens 13.0

  Correction of the lens 13.0

  Lens Flare 13.0

  Liquefy 13.0

  Operation of Matlab 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  maximum 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mean 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Measure Core 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Median 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mezzotint 13.0

  Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Mosaic tiles 13.0

  Multiprocessor support 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Neon 13.0

  Paper notes 13.0

  13.1.2 color NTSC (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Ocean Ripple 13.0

  13.0 oil painting

  OpenEXR 13.0

  Paint Daubs 13.0

  13.0 palette knife

  Patchwork 13.0

  Paths to Illustrator 13.0

  PCX 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Photocopy 13.0

  13.1.2 Photoshop 3D engine (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Photo filter package 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Pinch 13.0

  Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Plaster 13.0

  Plastic wrap 13.0

  PNG 13.0

  Pointillism 13.0

  Polar coordinates 13.0

  Portable Bit map 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Poster edges 13.0

  Radial blur 13.0

  Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 range (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Read watermark 4.0

  Crosslinking 13.0

  Ripple 13.0

  Rough Pastels 13.0

  Save for the Web 13.0

  13.1.2 ScriptingSupport

  Shear 13.0

  13.1.2 asymmetry (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Smart Blur 13.0

  Smudge Stick 13.0

  Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Splash 13.0

  Spherize 13.0

  Sponge 13.0

  13.0 sprayed strokes

  Stained glass 13.0

  Stamp 13.0

  SD 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  STL 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Sumi-e 13.0

  13.1.2 summons (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Targa 13.0

  Texture veneer 13.0

  13.0 tiles

  Torn edges 13.0

  Watch twirl 13.0

  Draft of 13.0

  Vanishing point 13.0

  13.1.2 variance (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  13.1.2 variations (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Water paper 13.0

  Watercolor of 13.0

  Wave 13.0

  Wavefront | OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  WIA support 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Wind 13.0

  Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01 / 05:23:00:00)

  Zig - zag 13.0

  Plug-ins option and third parties:

  DAZ Studio 3D bridge 12.0

  DazUpdateScene 12.0

  Plug-ins that could not load: NONE

  Flash:

  Mini Bridge

  Kuler

  Install TWAIN devices: NONE

  The nomenclature "7800 series" seems good.  Here is what my system shows under Windows 7 with catalyst 12.8:

  ...

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  OpenCL Version: 1.2 AMD - APP (938.2)

  OpenGL, Version: 3.0

  Texture size video Rect: 16384

  OpenGL memory: 2048 MB

  The video card vendor: ATI Technologies Inc.

  Renderer video card: AMD Radeon HD series 7800

  Display: 2

  Limits of the display: top = 0, left = 1600, low = 1200, right = 3200

  Display: 1

  Limits of the display: top = 0, left = 0, low = 1200, right = 1600

  Video card number: 2

  Video card: Radmin V3 driver mirror

  Driver version: 3.1.0.0

  Driver date: 20070808000000.000000 - 000

  Video card driver:

  Video mode: 1600 x 1200 x 4294967296 colors

  Legend of the video card: Radmin V3 driver mirror

  Video card memory: 0 MB

  Video card: 1

  Graphics card: AMD Radeon HD 7800 Series

  Driver version: 8.982.0.0

  Driver date: 20120727000000.000000 - 000

  Video card driver: aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, he's atidxx64.d, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll

  Video mode: 1600 x 1200 x 4294967296 colors

  Legend of the video card: AMD Radeon HD 7800 Series

  Memory: 2048 MB

  ...

  I use Catalyst 12.8 pilots at the moment and have a Windows 7 system and have a remote access utility called Radmin installed, but I don't know if seeing that Microsoft based Render driver is provided on Windows 8.  It seems that this could be the key, as the basic OpenGL implementation of Microsoft is made all in software.  If somehow driver Microsoft took control and you don't get really the GPU acceleration, then that would surely make things really slow.

  Rafaello, you have updated drivers...  You can post your top of your system information again?

  Have you tried a full, complete deletion ATI driver and reinstall from for example, 13.2 beta?  Here is the removal of ATI tool:

  http://sites.AMD.com/us/game/downloads/pages/catalyst-uninstall-utility.aspx

  -Christmas

• Train with the loop variable

  I have a form that contains text boxes where the name is created dynamically with a loop variable.
  < cfset formcounter = 1 >
  < cfoutput query = "ViewParts" >
  < input type = "hidden" name = "" RecordID #formcounter # "value =" #RecordID #">"
  < cfset formcounter = formcounter + 1 >
  < / cfoutput >
  < cfoutput > < cfset formcountermax = #formcounter # > < / cfoutput >
  
  on the page, he submits to the that I have:
  
  < cfloop from = "1" = "" #formcountermax # "index ="increment">"
  < cfif form. NEQ Qtyshipped1 '0' AND form. Qtyshipped1 NEQ "" > "".
  < CFQUERY NAME = "InsertQty" DATASOURCE = 'mydatasource' >
  INSERT INTO InvoiceTable
  (
  Reffacture,
  QtyShipped,
  RecordID
  )
  VALUES
  (
  "#GetLastInvID.InvoiceID #"
  #form. Qtyshipped1 #.
  #form. RecordID1 #.
  )
  < / CFQUERY >
  < / cfif >
  
  Instead of '1' at the end of the inserted variables, I want my increment. I don't know how to name what is possible.

  MarkWright wrote:

  > Any ideas?
  Do not evaluate. 98.798% of the time that it is not necessary. Table
  Notation, learn, love, it's very powerful.

• Updated entries on day of a Subvi with while loop

  Hi there guys! It's my first serious experience with LabVIEW, so the question may seem trivial to you, but it's not obvious to me how to solve this problem. So I do an installation that integrates a number of flow regulators, a temperature regulator, DAQ, some taps and a mass spectrometer basic tasks. All these must be automated using LabVIEW. I started by doing a VI for each separate task is going very well. Now I need to combine the latter in an experience of master VI, and of course I run into trouble.

  The problem is that I want of course to control this experiences with some selected buttons/dials/what is on the face before of the main VI. However, each of these VI runs a while loop in which fact acquisition of continuous/data communication / whatever. Of course, I want to change settings online. If I just naively tie them at the entrance to the Subvi these will be read only when the Subvi is started, not during each iteration of the while loop.

  I added a very basic example of the problem, so we are all on the same page. The main VI has a button, the State which should update something in the Subvi. However once the Subvi is started it takes control of the execution and the hand-VI seems to be ignored (appears to hang) even if the program has a lot of spare time to read the buttons and put on day of admission. What is the official solution for this kind of problem? My experience in programming that I prefer to keep the intact Subvi, so I can use it as a reusable standard library. Of course a similar question can requested the sub - VI output which will be updated only once the execution is completed (which is never during normal operation).

  PS. I'm using LABView 8.6 on XP

  The best way to set up a BT program must initialize first your settings, and then launch a while loop where you communicate/aquire data or whatever, then after the while loop is finished close and clean up your references.

  Inside the while loop, you can place your code in many of the screws and it is possible to run those in parallel, but I defenetly does not recommend the use of loops in slot face, especially without having to open the front panel or a stop test.

  If your code is completely executed up to your Sub - VI, the main.vi will wait for the sub - Vi ends before continuing the code.

• parallel processing: for loop taking place

  Hallo,

  I have a loop 'for' runnin on this system: LabVIEW2009, windows7, intel i7.

  I wonder if and how I can tell to LabVIEW that he would be allowed to run different iterations of the loop at the same time (concurrently) on my processor with 8 cores.

  Now, it will execute the next iteration when it ended the previous, even one so is there no dependencies in iterations.

  I want to give a 'ownership' of the loop, which means that it can be "unfolded" for parallel execution.

  Thank you

  Pier

  pop up on for loop and select "configure interation Prallelism."

  Activate it.

  Wire a certain number to the new 'P' of entry to specify how many processors to spread it everywhere.

  Ben

• Can someone tell me what's wrong with my loop of consumer queue or producer?

  A Labview engineer helped me with the overall structure of my program, made necessary by the rapid sampling rate data and post-processing requirements. He recommended the producer/consumer, loop and using one of the example (Cont CQI graph - int clk voltage) files to actual data acquisition. So I put the loop on foot and spend my two channels of data acq past in the loop of the producer. However, nothing is get picked up in the loop of consumer and none of my data gets displayed there.

  Someone wants to take a look and let me know what I am doing wrong?

  It seems that the only time where you have to write the data in the queue (in the loop of the producer), when you stop the DAQ while loop or the acquisition of data generates an error.

  You may need to place the element from the queue node in the data acquisition while loop.

• capture images with multiple loops of evil while

  I'm working on a VI to control a firewire camera. I am currently using a while loop with a structure of the event control functions of cameras inside. I also want the camera to start recording images in a folder when a button is pressed and stopped when you press a stop button. I wasn't able to get this feature in the original everything in a loop, but I added another while loop, but it does not work. I've attached an example where the first while loop is simplified (it contains only a displayvideoproperties node) to my real VI the first while loop has about 10-15 different cases for different functions as digital subtraction, triggers, etc... How can I get these parallel while loops to work together or how could I get the second while loop in the first?

  You need to change your code.

  1. use a unique Structure of the event.  One of the top loop will do.  You should have all the events of the user in the same Structure of the event (you can have more than 1).

  2 remove the left lower corner of the Structure of the event.

  3. low While loop must contain a State Machine.  In this particular case, I would spend the Structure of event reports the State using an ActionEngine (or functional Global Variable) machine.  In this way, your While loop bottom could continue to loop through the same State and continue to update the image control, image capture, etc..  There are other ways, but this one is probably the simplest.

  4. the Summit would deal with the imposing of the event: control of the functions of the unit, start recording, stop recording, save to file, stop/exit program.

  R

• NEITHER 9205 digital output configuration with DAQ Assist

  Hello

  I have two NI 9205 Analog Input Modules which I have configured to read from each of their 32 channels.  I used the DAQ Assistant help generate the vi which contains the task out - DAQmx event and also the DAQmx Read vi.

  I used the Wizard twice, once for each module 9205 and then put the playback functions in a sequence structure so that only read would be carried out at the same time.  It all works very well!

  Now, I want to add in the code to wait in a loop before all loop containing playback functions, so that the user can press the GUI to send a logic 1 to the unit under test, and after it is sent immediately starts collecting data.

  The DAQ Assistant Help does not recognize the module 9205 when I try to set up a task to write a digital output.  9205 a 1 digital output so why is the wizard does not recognize this?  I also tried to create a task manually, but I got stuck.

  Someone please help.  I can reach the source if needed, but I thought that the descriptions above were sufficient.

  Thank you

  Gary

  Hello

  You are right it shows a line in this user manual, and in fact, you have found an instance where an important piece of information was left out of the documentation. This digital output line is actually only available when you use a cRIO chassis. It will not work with the chassis for the acquisition of data compact 9172. Here is a knowledge base that explains it. I'll also go ahead and file a request for corrective measures so that this note be included in the next version of this manual. Thanks for the comments.

  Chris