Slow printing Officejet J3608

Similar Questions

• Slow printing Officejet 6110

  My very old (8 years) 6110 All In One works well until about two days ago. He started very slow printing, about 5-10 min. per page. It prints at the same speed in all modes. It prints slow even on a test in the menu printer page. I read in the forum that a bad print cartridge can cause this problem. When I turned on the printer this evening, there was an error code that says "remove and check print cartridge". I cleaned the contacts on the cartridge, but nothing has changed. I have no spare cartridges to change. I can not clear the error code to try a test page. I tried all the advice I found on the forum, but no luck. Are there other things I can try? A new series of cartridges will cost me about $60.00. I can buy a 6500 new for $80.00, or a 8500 for $110.00. It is better to waste any more time on it, or it's time to replace the old printer?

  Thank you, BFK

  This is caused by the failure of one of your cartridges. I don't remember if the Officejet 6110 print reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

  Print you a lot?  The 6500 and 8500 have a reservoir of ink separated and the print head.  They are more suitable for frequent printing.  If you are printing only occasionally the Officejet 6110 can be a better choice because it has less overhead for maintenance.

  If the printer will not print with a removed cartridge then I would replace the cartridge black with a #27, available for $20.  If this does not resolve the problem, you can try the color cartridge #28, on $26.

• HP Officejet 5510xi all-in-one: very slow printing

  My printer takes forever to print a single page.  I got faaster to work at some point, but do not remember how and now it is not printing normally again.

  Welcome to the @Mary6268forums.

  I read your post on the matter of slow printing, you face your Windows 8.1 system when printing to your Officejet 5510xi. I have a few ideas in mind below for you to check and try, and I hope they help!

  1 be able to reset the printer:

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  2. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  3. copy of test. Copies also produce very slow?

  4. print from Notepad. The tests also slowly produce here?

  Let me know the results

• Officejet 4315 slow printing problems after replacing the print cartridge

  my printer was working fine until I replaced my print cartridges. I replaced the black with color with 22 and 21.

  my test page prints fine and sometimes my impression is very good. but often, my impression is extremely slow. can't understand why it is slow sometimes and other times it is nice. do not have this problem until I replaced my print cartridges.

  I found a post on slow printing and I tried the different steps. don't know what the issue is. Thank you

  Real new ink installed HP?

  You could remove the cartridges, reset the printer and turn on without the cartridges, and then reinstall the cartridges. Eliminate any power surge strips or extensions, plug the unit directly into a wall outlet.

  When you mention slow, how to slow down? How long to print from the computer exactly? How long for a print job initiated from the printer exactly?

• How to get a newspaper like my Officejet J3608 fax

  I have an Officejet J3608 which I run as for a stand-alone printer, copier and fax machine - that is to say, not connected to a computer. I need to prove I sent a fax to someone 5 months ago using the fax log, but the log that is currently printing gives the last 30 transactions, that is to say back 1 month ago about. Is it possible to extract a newspaper more there than that?

  Thanks and greetings

  Hello chef

  The Officejet J3608 can contain only the 30 last faxes that have been sent or received. There is no way to go back five months.

• HP 8600 slow printing of diagrams and color photos

  I have a desktop HP 8600 printer pro jet and it's very very slow at the color print and diagrams (colored or not). I aligned the printer and clean the print head but it is still slow and I mean slow 2 5 minutes from printing a page.

  I also used the HP scanner/doctor and everything is fine with the printer is brand new.

  Help, please!

  Hello there bamitssam21,

  Welcome to the Forums

  I saw your slow printing problem you are having with your Officejet Pro 8600. I noticed that you have ran a print head cleaning, alignment and print and Scan Dr. indicates no error. There could be several reasons why slow printing occurs, the power of the printer for the program you are printing from (if the problem happens only in a single program) or even the pilot.

  I'll give you some suggestions to try and I hope that we can get rid of this problem!

  First, reset the printer and when you plug it back, just please make sure it is plugged directly into the wall socket. Avoid bars, surge protectors, nothing more.

  This may sound weird, but sometimes it really helps and solves the problem.

  Then, update the printers firmware: get the latest Firmware and product updates

  If the problem persists, follow this guide for printing slow: slow printing

  Good luck! I would like to know how to get you out, and if so, I'll help you gladly further.

  Thank you

• HP Officejet J3608: HP Officejet J3608

  How to recover the last 5 numbers I got call on my HP Officejet J3608 all-in-one?

  Hi @Rottiegirl,

  Welcome to the Forums of HP Support! I see that you want to view the last 5 numbers that calls on your HP Officejet J3608. In my view, there is an option to print reports of caller ID, please start below retrieve the report:

  Menu Setup > print reports > Caller ID report

  I hope that this is the report you are looking for, let me know if this has been helpful!

  Thank you

• Extremely slow printing wireless with HP Photosmart Premium C309g-m

  I see extremely slow print speeds when printing from a Mac or a Windows XP system on a new printer HP Photosmart Premium C309g-m wireless. The printer starts printing immediately when I request a print, but it only prints one line. It will take about 15 minutes then to print the rest of the page, each print after a very long break line. Print demo page doesn't exhibit this problem, only documents of programs such as Word 2008, Safari, and Firefox (I tried firefox on PC and Mac) are affected.
  
  If I connect to the printer via a USB connection it prints very well, so this problem seems to be the only wireless printing.
  
  Printer: HP Photosmart Premium C309g-m
  Computer: Mac mini (late 2009 model) (also tried a Windows XP laptop, by comparison using the latest drivers from the HP website)
  OS: Mac OS X 10.6.2 with all available updates installed
  Method of connection: cable Ethernet connection to the router wireless
  Printer drivers: version 2.2.1 (Apple provided, drivers HP never installed as system comes with 10.6)
  Wireless router: Apple TimeCapsule (early 2009) 1 TB, honing a/d and modes of b/g on 2.4 and 5 GHz. TimeCapsule is in transition as the DSL modem handles DHCP service mode
  Encryption: WPA2 Personal, no MAC filtering or hide the SSID.

  IP addressing scheme: all addresses are distributed by the server DHCP without reservation of any kind

  The TimeCapsule is sitting three inches from the printer and the printer indicates the complete signal. Connecting the printer to the wireless network and setup of the printer on the Mac went off without a hitch. Only when you print a test document discover us the problem. The wireless network will behave as expected when you access Internet from Mac and Windows devices (tested with a laptop computer Dell XP and a MacBook with OS X 10.6.2), so I don't see any problem with the wireless network together.
  
  Attempt to use:
  1 reboot and power off, wait, restart the computer
  2 reset the print subsystem, the printer off and on again and reinstall the printer

  3. disconnect the power to the printer and let it sit for several minutes before trying to print wireless.
  
  None of them worked.

  I don't know exactly what is happening... I'll have to think about.

  Looks like you're running with the current configuration.

  Can we call this resolved?

• DeskJet 3755: Extremely slow printing, work stuck in the print queue

  Hey, I just bought a HP all-in-one Deskjet 3755 and put it in place and recorded. It is connected to my network, but I'm having a few problems.

  (1) the printer will only print jobs when it is connected to my computer by USB, even if I connected wireless.

  (2) print PDF print jobs EXTREMELY SLOWLY, over a minute for a page of text.

  Please do not just link me to support.hp.com pages... for some reason, they do not load on my computer (see the place completely empty, even if the HP site support work and charges).

  Thank you!!!

  Hey @anb9495,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the slowness of printing for the all-in-one printer Deskjet 3755. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to troubleshoot slow printing with your printer.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet 1050: Deskjet 1050 slow printing

  Given that I have installed the printer software 1050 10 windows did not have the following problems: when I print a document feeds the paper, the printer then does nothing for a while, then part of prints, prints, stalls, stalls... the document is finished. If I photocopy a document it takes forever to print with it's stop start the effect. Any ideas? Dave

  Hi @Neptuno,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using a printer all-in-one HP Deskjet 1050 with a Windows 10 PC and the printer takes a long time to print or even copy. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  Here is the document of support designed to be used with this type of problem - slow printing.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• OfficeJet 7310: Reported Device Manager driver missing for printer Officejet 7310

  I used the full setting install software downloaded from the HP site to set up a printer Officejet 7310 on a Lenovo laptop, T540p with OS 64 - bit Windows 8.1.  Installation and printer seem to work fine since I can print and I can also scan from the HP Solution Center utility.  However, Device Manager reports two errors/anomalies as follows.

  Under the heading 'Multifunction cards' the Officejet 7300 series properties shows the status of the device such as:
  This device is disabled. (Code 22)
  Click Enable device to enable this device.

  To the title of the theOfficejet 7300 series entry 'Other devices' properties shows the status of the device as:
  The drivers for this device are not installed. (Code 28)
  There is no compatible driver for this device.
  To find a driver for this device, click Update driver.

  I find this a little confusing, because I believe that the installation of the software is supposed to include the pilot, as well as the printer seems to function (which could be due to default Microsoft drivers).

  Any thoughts on how things are in this State and how to recover would be deeply appreciated as I prefer not to "ignore" error messages.

  Thank you

  Glenn

  Well, I finally got a moment for all dismantle and reinstall according to the suggested procedure.  The offending Device Manager entry disappears not directly as a result of using the tools Microsoft and CCleaner, but after these steps in the process, I was able to remove the entry from the device.  I suspect that the registry was somehow blocked upward and demelee enough tools stuff for me to delete the entry.

  The relocation went well, but unfortunately, I misread the part about the reference of USB and initially installed with a USB connection.  I had to go back and add the network connection, which was not a problem.  I wonder if I can remove the USB from the printer through devices and printers instance while keeping the Solutions Center HP happy on the network printer instance.

  Thanks again for the detailed procedure.

  Kind regards
  Glenn

• LaserJet P3015: Slow printing to HP LaserJet P3015

  Hello

  I have a LaserJet P3015, which has the "question of slow printing. When I sent a job to the printer it takes 2 to 10 minutes to print. I have changed the drivers, added the printer directly on computers instead of the server. Nothing helps.

  Can you please give me some ideas how to solve this problem?

  Hello

  Thank you for your response. The problem is now resolved. It was caused by the printer PCL6 driver. Switching to PCL5 solved the problem.

• I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.

  I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless.  I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.  There is nothing I can do to Solutions of HP to recognize the printer.  What causes this problem?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet 4500 Wireless - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printer Officejet Pro 8620: officejet pro 8620 failure of the wireless card

  E-all-in-one printer Officejet Pro 8620 was strange for the past few weeks - the blue light would remain solid but nothing prints not the touch screen would not respond and it would be not closed when the power button was pressed.  Now, it has gotten worse - he sees not the wireless network (other devices work well) and prints a blank page to print the report.  I ran the printing and scanning Dr, but he did that tell me that the printer cannot detect the network.  I tried to reset to the default factory settings wireless, but it still does not detect the network.  I think that the wireless card is not (it is exactly one year and two weeks since I bought it).

  Is there a way to confirm my suspicions?  Is there anything else that might be causing these problems?  If so, how to replace the wireless card?  I worked with electronic equipment for years and I'm very comfortable, replacement of parts and components of computer devices.

  I did the factory reset and went through the installation procedure as directed.  The printer still can't find wireless network and print report still produces just a white sheet.

  I'll contact the HP Support

• How can I download the manual of the printer OfficeJet Pro 8500 a. thanks.

  How can I download the printer OfficeJet Pro 8500 a manual.  The easy way.  Thank you.

  Hello

  You can download the Guide of the user on the link below.

  http://h10032.www1.HP.com/CTG/manual/c02668142.PDF

  Kind regards

  DP - K