Slow, Satellite Pro M70: xferrecv_recvMain2(): error socket() 3135, 10106

Similar Questions

• Satellite Pro M70-275 slower than the Satellite M70-110?

  Hello

  A couple of weeks ago, I bought a portable Satellite M70-110, with Centrino 1.7 GHz processor and 512 MB RAM. Last week, this computer got stolen from my apartment. (Damn them thieves low-life..)
  I wanted to buy exactly the same model again, but he could not find anywhere. Instead, I bought a Satellite Pro M70-275 because he seems to be pretty much the same thing, with a great 2 GHz. processor, it's going to be a little faster then, I thought.
  The problem is that it feels like the new is slower; I don't understand why. No more slow, as when you are working with graphics heavy, cause I don't have, but slower at startup, when this regime between programs and so on.

  The old used XP Home Edition, the new one XP Pro. This could be the problem; XP Pro requires more RAM?

  The old man had an ATI Radeon x 700, the new a x600se, but I can't imagine that this could make a difference with the applications that I am running.
  I use a Soundblaster PCIMCA card in the new. This could be a problem?

  Any ideas appreciated!

  Johannes Ogren
  Göteborg, Sverige

  Hello

  As much as I know there is not much difference between WXP Home and Pro, and I think that the use of the PCMCIA card. Try to turn off the sound in the BIOS and also disable it in Device Manager.

• Satellite Pro M70-132: excellent WiFi connection but the pings are slow

  Hi all...
  My Satellite Pro M70-132 have problems with Wi - Fi connections (WiFi built in)... Generally, when the connection is excellent (indicator of windows), the pings are slow - very long time: 1212ms, 325ms, 645ms, 2112ms, 91ms, s 168ms... etc 'demand time limit has expired' (or sth like this).
  I have updated with the latest version of the Intel WiFi driver - it does not work...
  I installed new system - it does not work...

  Is it possible, that LAN WiFi is dead on my M70-132? How can I check before sending my 'Toshi' to the service?

  (BTW - built-in Bluetooth has been switched off...)

  I was tempted to access with several AP and also ad hoc. Every time, same results... connection strong-great but pings are slow... and often ping timeout...

  The IP address has been set manually and automatically - it does not work... too multidimensional :-(

  It's not metter WEP encryption is enabled, 'on' or 'off' and no authentication method does not change the situation with WLAN...

  Post edited by: maxgoldie

  Hello

  If the work of WLan connection and you are connected to the router so I guess everything's ok.
  Time to ping depends on not always the strength of the signal.

  If you ping other ip on the net if the time depends on the provider and type of connection.
  But if you ping your WLan router and it s very slow so it s a bit strange.

  If you think there could be something wrong with the Wlan card then you can try asking for help ASP.

• Satellite Pro M70-113: modem - very slow

  Hello

  I have a toshiba satellite pro m70-113 laptop. I bought it in Saudi Arabia, Riyadh.

  The problem is that when I use the modem (dialup) software from toshiba to connect to internet... the connection is very very slow... While on the same line, on my desk speed isn't a problem... on average, I get 1/4th of the speed I get on my desk... and on the same telephone line...

  What is the problem?

  Can someone help me in this... are there any configuration software that can fix this problem?

  Help will be very appreciated...

  Thank you.

  Hello

  I don't know what your desktop device modem, but modems takes care of different speeds.
  You can also check the properties of the modem for laptop.
  Go to the Toshiba software modem properties and check under the tab "modem".
  You will find the maximum port speed. This should be set to the highest value.

  It is also possible that different providers use a different speed of data transmission.
  Some time ago I used a modem and I was very surprised that my speed of data transmission is different on the different suppliers.
  As you can see there are many factors why you don? t get the same speed of modem.

• Satellite Pro M70-113: the modem speed is too slow

  Hello

  I have a satellite pro m70-113 laptop.
  The problem is that I am not able to web surf, when you are connected to the Toshiba software modem that is integrated, because the speed is too slow.
  Connecting about 40 Kbps, but I can't even open the yahoo site just because it's very slow. I mean it seems that there is no data transfer... I have to wait 5 min load yahoo.com!
  I tried uninstalling, reinstalling the drivers, but the problem is the same...

  And on the same telephone line, when I connect to the net on my desktop, I get a decent speed. If the problem is not telephone line or my ISP, but something on my laptop hardware modem, or its drivers.

  Please can someone help me...

  Thank you, hoping for an answer...

  Hello

  Please check the maximum speed of the port and set it to the maximum level. You can find it in the properties of the modem in Device Manager.

• Re: Satellite Pro M70 - high utilization of the processor - low Performance

  I sincerely hope that someone can help you. I do not consider myself really computer illiterate, but this is where my understanding ends and I really value any assistance.

  I have a Toshiba Satellite Pro M70 for 2 years and I'm a final Defender to Toshiba. However, my operating system is slow. Average day use with Internet Explorer and Office 2007 is a laborious process that takes too much time. I have had conflicts with Trend Micro Internet Security 2008, that works perfectly.

  But turn on the computer takes forever. The CPU usage is generally high and System Idle process as well. I reinstalled Windows XP from the Boot Toshiba DVD already 4 times to nine and install everything over and over again. Each time after all to speed once again, performance is disappointing.

  I expanded RAM to 1.49 GB that makes little difference from the original 1/3 of RAM. It seems that something is slowing down the computer, but it is not visible in the process; but a certain process of svhost.exe who have the ability to handle little or the CPU usage.

  I've used Windows Gold Certified Uniblue Power Suite with a good registry cleaner. This helps a little, but after a few days, it seems only make it worse. I have a processor Intel Pentium M 1.73 GHz. search online reveals that Trend Micro IS 2008 is pretty good and demanding little capacity compared to the competing security packages.

  Is this system/software related or it could be a hardware problem?

  Thanks in advance to all!

  Hello

  I doubt that it could be a hardware problem, I mean a CPU usage can get if a certain service or applications would be run in the background of the OS.

  Generally, Antivirus applications are a kind of software that could cause this problem I had a Norton System works installed on my laptop and this software needs a lot of resources that slowed down the laptop
  In addition, some applications of Toshiba which are installed and running in the background may affect performance. But these applications are required to be able to use all the features of the laptop

  However, in msconfig you could disable.
  Launch msconfig-> Startup tab and disable some processes that are not necessary for you.

  In addition, you can use the CCleaner to clean the registry and operating system

• Satellite Pro M70-113: not possible to write on CD - R and DVD-R

  Hello

  I have a Toshiba satellite pro m70-113 laptop.
  Playback problems:
  I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
  and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
  http://img64.imageshack.us/img64/9574/1bp3.jpg

  And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
  When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

  Write problems:
  After getting reading problems, I tried to test my drive writable.
  And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

  Although the same content when it is burned to cd - rw, it is a success.
  I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
  When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

  In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

  Please help me.
  It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
  Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

  Thank you

  Hello

  Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
  Usual it of not possible to fix this and the replacement drive is necessary.

  You can also consult the user manual. You will find a list with all supported and compatible media.

  I also found this topic in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

• Satellite Pro M70 and chariging problems

  Hello everyone,

  I wonder if anyone can help me with my problem, my Satellite Pro M70 sometimes does not load when I put the charger into the socket, if I out of the power supply and leave it for 2 days I have costs for a period of time up to 20 hours, and then did the same thing.

  I tried to turn it on without the battery, to check whether the problem is with him, but he turns. So this led me to believe the problem isn t the battery.

  Can anyone help?

  > have tried to turn it on without the battery, to check if the problem is with him, but it won't turn
  You mean the power of t n for laptop up connected to the sector, but without battery plugged in?

  Hmmm, to me this looks like a bit of a problem with AC adapter or an electrical problem of power offers the Board of Directors. As you probably knew that, it is really difficult to provide suggestions without touching the laptop.

  First of all, you can check if the machine uses latest BIOS. If this isn't the case, update the BIOS.
  Check if the laptop would go also without battery and only connected to the network.

  If this does not work, then the adapter should be verified.
  If the AC adapter is ok, then, the motherboard must be verified

• IE needs more load using Dynadock V10 on Satellite Pro M70

  Hello

  When I use the Dynadock V10 on the satellite Pro M70 every time when a program has pictures in it, the need for long time to load, and for this time the mouse cursor is jumping. It appears in MS Internet Explorer as well as in MS Word.

  Is he maybe a bottleneck with all these different data to come take a simple USB cable?

  When I do not use the Dynadock, linking all the various cables directly with the satellite Pro error doesn't happen!
  Driver Grafik is on the most recent release and the operating system Windows XP SP3 and latest updates!
  I tried to uninstall the software Dynadoc, but the problem remains takes place.

  How can I solve the problem, because now the work is so bad, that the Dynadoc is not supposed!

  Thanks in advance!

  > When I use the Dynadock V10 on the satellite Pro M70 every time when a program has pictures in it, the need for long time to load, and for this time the mouse cursor is jumping. It appears in MS Internet Explorer as well as in MS Word.
  How to understand this?
  This happens on external monitor connected to the Dynadock or what?

• Satellite Pro M70 overheating when playing games or watching DVDs

  Hello world

  my laptop (Satellite Pro M70) overheating regularly, especially when playing games or watching DVDs.
  Initially the cooling gets really hard, then the laptop would become hot, and shortly after that it stops completely. I ran it about 50% cpu power (DVD mode) for some time, which helps a little, but makes it much slower games.

  I do not know whence this problem, you have any ideas what I could do?

  Don't know if it's important, my graphics chip is the ATI Mobility Radeon X 700.

  Thanks in advance

  > My laptop (Satellite Pro M70) is overheating regularly himself, especially when playing games or watching DVDs.
  Still is it playing games and watching DVD movies to emphasize material for portable computers.
  Devices such as the CPU and GPU run with maximum efficiency and produce a lot of heat.
  This could lead to problems of overheating, especially if the cooling modules n t work properly.

  > I do not know whence this problem; you have any ideas what I could do?
  I think that the cooling modules don't cool the laptop properly because fans could not run with maximum efficiency because of the dust and debris.

  The same thing happened to me. I just cleaned the vents using a jet of compressed air. This jet of compressed air can be ordered from different computer resellers and it s a professional tool to perform this cleanup.

  I think you should test this.

  Good luck

• Satellite Pro M70: Software does not remove

  I have a new Satellite Pro M70 and when I add or remove programs, it will not work. I select the software I want to delete and nothing happens. There are no popup message to indicate an error, no hourglass to tell that it is running, freezes it just add or remove. Someone at - he seen this before?

  Hello

  Maybe this application runs in the context of the operating system and so you can't remove it form the "adding / removing programs.
  Please check the the Task Manager for this application.

  The second possibility is that the registry entries are damage and/or files are missing which are necessary to remove this program.
  In this case, you should try to install this program, then remove it.

• Satellite Pro M70: Errror Message Power saver - code: 0x0

  Whenever I start my Satellite Pro M70 I now get an error Toshiba power Saver.
  It reads "Toshiba Power Saver A Fatal error has occurred. The program will be terminated code: 0x0.

  Can anyone suggest how to get rid of it.

  Thank you

  Hello

  It's not easy to say why this power saver utility error message, but generally a new installation of this tool should solve the problem.
  Have you tried to reinstall the energy saver?

• Update of the BIOS works is not on Satellite Pro M70-275

  Hey

  Im having a problem, I can not update my bios, I downloaded the right bios file, but when I try to update I get a bsod just until it begins to Flash the bios.

  The biosfile I downloaded is:

  ARKive
  Satellite pro
  Satellite pro M series
  Satellite pro M70 (PSM76)
  PSM76E

  Its the bios 1.70 for win xp

  IM also of problems with my sound, I downloaded the rather and installed, but there is no sound.

  IM using Windows XP SP3

  Concerning
  Lars

  Hello

  BIOS update is necessary? Or what is the intention to update the BIOS?
  Usually if you have some serious problems, the BIOS isn't essential update

  With regard to the sound:
  You can solve the problem in Windows XP, install the KB888111 and KB835221 hotfix before you install the audio driver.

• New HDD in my Satellite Pro M70 shows 55GO only

  Well, I put in a new form of HDD Samsung in my Satellite Pro M70 model PSM75E. It has a size of 320 GB, but it s only showed like a 55 GB of hard drive.
  How can I solve this problem, my system is Windows XP with SP3.

  Thanks for your replies

  Hello

  You must format the HARD drive to NTFS and should create a new partition.

  Welcome them

• Satellite Pro M70 - stopped screen lights

  Hello

  My Toshiba Satellite PRO M70 screen lights.
  I don't know why, but sometimes when the screen is broken and I put it up it turns on, but after a few seconds it stops.

  It started a few days without something strange in my pc like hitting or something like that.
  I tried to connect an external display and it works weell.

  Anyone know why it cant pass or how fix it?

  Thank you

  Greetings

  Toni.

  Hello

  The Fn keys work?
  You can increase the display button narrowly by using the FN + F7 combination?

  Please also check the energy saving profile.
  Maybe the display brightness is set to a lower value in the power saver profile.

  But if you will not find anything unusual in the settings of the software, so I guess that the brightness display problem is related to the failure of inverter FL.
  The FL inverter controls the brightness of the screen, and this part needs to be replaced.