slow to connect to WiFi after sleep

Similar Questions

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• HP envy x 2 wifi after sleep

  Hello

  I have a HP Envy X 2 g001-el Atom convertible netbook with detachable keyboard.

  upgrade to win8.1

  Home wifi network, it must 'autoconnect' to this network.

  The fact is that when I turn the laptop, plug in and working properly.

  Whenever I take the operating system (without turning it off), I have to disconnect and reconnect in the case otherwise it won't surf the web or any other task related to the internet.

  When this happens, if I'm going to nd command line, run the IPCONFIG command I see he has the right address IP/subnet mask and gateway

  Ping to the gateway gets timeout

  I think it's a driver problem, that's why I write under 'software '. Updated drivers.

  Thanks to everyone for help me, he is a stupid bug

  another small issue is that sometimes audio doesn't work and I have to restart

  time sometimes change by himself at odd hours

  the trackpad gestures works do not (this works in stain remover and reconnect the keyboard)...

  I can say that my first experience of hp isn't that exciting...

  Update:

  the problem is related to suspend the options and the wifi adapter. from the Panel, network card, chose the card, drivers and found an option called "wake up mode." Set it to 'none' and now it's working after sleep.

  We can say "resolved", although I think that a "tablet" or something similar must always be connected without having to seek solutions 'geek '...

• ENVY 750-197c: unable to connect to WIFI after downgrading to win 10?

  So I just bought a HP ENVY 750-197c desktop computer and the first thing I did when the establishment was downgrade 10 Windows of Windows 8, which worked very well. However, now I am not able to detect the connections/connect to WIFI on the computer. I guess it's because I need to update or get the correct drivers. However, I can't know which ones I need. When I look at the Download Center here on the site and go to the list of drivers for this model of computer, there is no option to select the drivers for Windows 8. Instead, there are only options for Windows 7 and Windows 10. How am I supposed to download the right drivers, I need? Which?

  Hello:

  The list of parts for your PC shows that it comes with an INTEL 3165 m2 card.

  http://PartSurfer.HP.com/search.aspx?SearchText=N0B14AA

  Here is the link for the driver to W8 for this model of card.

  The second file is left for W8 64 bit.

  https://Downloadcenter.Intel.com/download/24863/Intel-PROSet-Wireless-software-and-drivers-for-Windows-8-?product=89450

  You will also need this driver bluetooth if you want that the BT function works.

  https://Downloadcenter.Intel.com/download/25321/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-8-64-bit?product=89450

• Unable to connect to wifi after factory reset

  This morning I had to do a factory reset on my Presario SR5214X. All came out of it works well, except that now I can't connect to wifi. The only options it gives me for internet connection are broadband and dial-up. WiFi was working fine before reset and I have installed the only network driver update available on the Web site, but it still does not seem to recognize any kind of wireless connection. The computer is a good 5 or 6 years, but it was working fine and all seemed well before. How can I update or install to get the computer to work again with wifi?

  Hello:

  There might be some brands that have this hardware ID, but it shouldn't matter.

  Try the driver for this model.

  http://www.Dlink.com/UK/en/support/product/DWL-G520-802-11g-wireless-LAN-PCI-card?revision=deu_revb

  You can automatically install the driver by running the configuration file once you unzip the download, or you can just install the driver manually by clicking on the ethernet controller in Device Manager. Click on the driver tab, click on set to update driver. Select the 'Browse my computer for the software' and look for the folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  I don't know if the installer also installs the connection software (that I do not particularly like because I let Windows manage my network connections).

  Manually install the naked driver will prevent the installation of additional software.

  If for some reason that this driver doesn't work, then try one of this model.

  http://support.NETGEAR.com/product/WPN311

• 7 original slate does not connect to wifi after update

  My daughter-in-law has a 7 Slate origin. It was working fine; connected to our wifi without problems, etc. I used it the other day and noticed there was an OTA update so I installed. Now, the Tablet does not connect to our wifi at all. I tried to do a factory reset, but it still won't connect. You can see my SSID and seems to try to connect; the wifi symbol shows the signal strength but gray remains and refuses to turn blue and complete the connection.

  Is there anything else I can try to make it work?

  As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the HP Slate 7 more free of charge so I can better answer questions on the Forum.

  Why not to delete the network connection original, that you used to connect to your router and then scan for wireless devices?

  @abo999

  As seen in the screenshot below pictures, go to the settings--> Wi - Fi and click on your SSID and then click on forget. Scan and when you see your SSID again click on connect and provide the password. This should work for your question.

  

  

  Once you have done this, connect to the SSID of your router again.

  The nice thing about operating systems, it is that there are usually several ways to attack and possibly solve the problem.

• Unable to connect to Wifi after new Hard Drive installation

  Hello, I really need help. I have searched this forum days, reinstalled my drivers in the correct order, but I'm still not able to connect to Wifi.

  I have a Dell Inspiron 1545 and I recently installed a new hard drive. Everything works fine EXCEPT the WIFI. In the network controller device manager has a yellow triangle with an exclamation mark inside. I tried to search to find the driver but it says that it is impossible to locate. When I download the Intel driver on the Dell site, it downloads but nothing never opens. I'm at a lost and I just need help. All the answers or pointing in the right direction if this has already been resolved would be greatly appreciated.

  OS: Windows Vista 32 bit

  MizzGi,

  Download and install in this order...

  Dell System Software, v.6.5.0, A05

  Intel GM45 Express Chipset Family, v.8.7.0.1007, A00

  Card reader Realtek RTS5158E, v.6.0.6000.20125, A04

  
   

   

   

  Then, go to the Dell warranty status , enter your service tag, click the original configuration. Look and see what wireless adapter that you have installed. Then, go to the drivers & downloads , enter your service tag, select your operating system and under network, download and install the drivers for your card.

   

   

  Then, download and install Dell QuickSet, v.9.6.21, A07

   

   

  Places to look to see if your connection is activated

   

   

  What is going on?

   

   

   

   

  Rick

• Why my MBA don't reconnect to WiFi after sleep?

  So whenever I put my Mac to sleep (the lid), it refuses to connect to my WiFi at home.

  I have try the diagnostic assistant, who tells me that I need to reset my router. I know that this is not the case since I'm logged in on other devices.

  I did a little research and am looking for a solution that doesn't require me erase all previous WiFi access points.

  Anyone know anything?

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

  1. If possible, test at another network, such as a public access point or hotspot created by a mobile phone. Some Wi - Fi routers are not fully compatible with Apple devices. More specifically, the security mode for the network, as shown in the network preferences window, should be 2 personal WPA or WPA 2 Enterprise. If the router doesn't support either of these modes, it should be replaced with another.

  2. make sure that the network is on the list of favorites by following these instructions. It is important to read the article, as it is the starting point for further efforts to solve the problem. If you skip any step, the problem cannot be resolved. Make sure that the box marked

  Remember this computer has joined the network

  is checked.

  3 follow the instructions in this article to support.

  4. reset the PRAM.

  5. take note of all your parameters of connection Wi - Fi in the network preferences pane, then remove the connection in the connection list and re-create it with the same settings. This by clicking on the icon of the lowest sign from the list of connection, select Wi - Fi as the interface in the form that opens. Select join the other network in the network name menu, then select your network. Enter the password when you are prompted, and then save it in the keychain.

  6. in the menu location at the top of the network preferences window, select Edit locations. A sheet will fall. Click on the plus sign to create a new location. Give it the name of your choice. In the new location, set up the Wi - Fi service with the same settings that you used before. Click on apply and test.

  7. run the Keychain Access application. Find and remove all the network password AirPort elements that refer to the network. Make a note of the password first.

  8 turn off the Bluetoothand the test.

  9. reset the system management controller.

  10. This step should not be necessary, but he has been advised by the Apple Support in some cases, apparently as a solution for a bug. Open the energy saving pane in system preferences. If necessary, click the lock icon in the lower left corner to unlock the settings. When prompted, enter your administrator login password.

  Select the Power Adapter tab and uncheck the boxes marked

  Continued access to the Wi - Fi network

  and

  Enable the NAP...

  If it is present. Then, if the computer is a MacBook, select the stack tab and uncheck the box

  Enable the NAP...

  11. reinstall OS X.

• Satellite Pro L670-17R - reset of the card Wifi after sleep

  Hello

  I use my new Toshiba on the Wifi port. All the other portable surrounding are very good (Sony, Dell), but my connection is random and the wifi card must be reset after each phase of sleep (using the solution to "solve the problem" Windos)... It's boring.

  Cannot find a driver on the site and update the BIOS is also impossible to install (in mode RUN AS ADMINASTROR).

  I use Windows 7 (64-bit).

  What is the problem?

  Concerning

  Hello

  In the past similar problems were fixed with BIOS update or driver update.
  I put t understand how it may be impossible to find a driver. Have you checked http://aps2.toshiba-tro.de/wlan/ Portal Toshiba WLAN?

  What is the problem with the update of the BIOS? BIOS update is not available or you can not install it?

• Why my new Aspire one 7 "Tablet B1-730HD must be manually connected to wifi after does not turn off?

  When I stopped my tablet, I have to manually reconnect to the wifi. It does not "sleep", or at any other time, and apart from that it appears to be a stable wifi. I only have this tablet since Christmas, and it wasn't the case when I had first, suggesting that maybe it's the result of an application being installed, or an update? ..... I've tried forgetting the connection, restarting the Tablet, re-login etc, but nothing seems to solve this problem. Can someone please shed some light on this? Thank you.

  You can try a factory reset, but you will lose all your personal data, you will need to make a backup first.

  data/backup of the settings reset & reset/factory

  normally, even after a stop, it will reconnect automatically when you re - enable WiFi.

  do a factory reset, you will remove all the app downloaded, so you can check if it is an update of the system or application that caused the problem.

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• Problems with WIFI after sleep-wake up.

  -Wifi does not randomly after coming out of sleep.
  -Sometimes it can see the network with at least 2-3 bars, but does not connect and the Troubleshooting Wizard offers no help.
  -wifi only way to recover is to uninstall the wifi adapter driver in Device Manager and then reinstall it, and then it works fine.
  -This problem only occurs when I am a little close to the edge (still a lot within wifi range) of the router. otherwise, IE very close to router, there is no problem at all.
  n ' has not had any problems with windows 7 at first, but wifi problems randomly started upward. uninstalled the 2-3 most recent programs with Revo Uninstaller.

  Notes: thinkpad x 61 Tablet, fresh running windows 7 (not upgraded), card express 11 a/b/g wireless lan mini pci, router is an apple Airport extreme from 40 feet away with WPA2-Personal Security.

  Hey art vandelay.

  Welcome to the Microsoft Answers community.

  I suggest you try the methods one by one and check below.

  Method 1:  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  1: click on start, go to control panel. In Control Panel, click small icons to DISPLAY.
  2: find the network and sharing Center and open it.
  3: on the left side, you will see an option that says "change the map settings. Open it
  4: you'll be there, two local and wireless connections. Right-click on WIRELESS one, and then select Properties.
  5: now, click on CONFIGURE.
  6: you will see 5 tabs, click on the last one that says "power management."
  7: now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2: Perform the cycle of power modem/router.

  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer. Now, try to connect to the internet.

  Method 3: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  You can also try methods provided in the article.
  http://support.Microsoft.com/kb/928152

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• No WIFI after sleep

  I have a Mac Mini 2011 environment.  Just updated to Sierra.  Everything is good, but I noticed that when it wakes from sleep, I need to manually reconnect to my wifi.  I have not seen this behavior in El Capitan.  Any ideas?

  It must be assumed that you have checked and reset the setting to allow the

  Mac to connect to the wi - fi network used previously or favorite and keep

  connected to the chosen one. Especially if there are several in your area

  and you can only use your (given other are not open and/or are not yours.)

  • How to troubleshoot connectivity Wi - Fi - Apple Support

  https://support. Apple.com/en-us/HT202222

  If the network preferences settings and your wi - fi airport are correct,.

  you could try & reset the SMC, the power manager; or change the

  the contents of NVRAM or PRAM • on Macs with Intel processors. Details on what

  expect these settings to accomplish do not specify a Wi - Fi or the airport.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  Sometimes a simple stop and restart in safe mode, can help the Mac

  check & difficulty of the basic stuff. Hold down the SHIFT key on startup, then log in to safe mode.

  Some may try "to repair the permissions. Thereafter only to restart the system normally.

  There may be some logs generated in connection with this. but

  they can be difficult to decipher. The utility Console log shows too much.

  I wonder if the base station must be associated with the later version

  AirPort Utility in the new macOS; Sometimes there may be a

  Update or any other changes to the software or firmware that is given a new MacOS.

  Wireless diagnosis allows you to easily identify and troubleshoot Wi - Fi.

  • Find problems with Wi - Fi using your Mac - Apple Support

  A few items of current support of reference + troubleshoot appear here:

  https://www.Google.com/search?q=mac os x + wifi + questions

  An occasional reset from the base of the airport can be useful in a process of elimination

  and troubleshooting; one of the many things to read and determine if it can help you.

  • Reset an airport base station FAQ - Apple Support

  I'm sorry that I don't really know why your wi - fi fell in the morning. Mine has been

  stable enough, but I do not give my wi - fi with the new OS X, since I

  have four former Mac using their latest vintages & want to continue working.

  Good luck in this case!

• VAIO Tap 20 lost wifi after sleep

  My Vaio Tap 20, after waking up from his sleep, he loses his wifi. Does anyone else have a 20 Tap having problems?

  Ryan,

  Thanks for the reply. However, I tried the instructions and tested it and I still lose my wifi whenever I wake my computer from sleep mode. Any other suggestions?

• Unable to connect to WIFI after upgrade windows 8.1

  Hello

  I fortunately was connection to my wifi at home last night before my HP Pavilion notebook updated to windows 8.1 g7. Now, I can only connect via ethernet cable.

  I called Microsoft Support and I was told that my wifi driver was outdated and must be reinstalled. I had a look at downloads available for the network drivers, but I'm not sure how to establish that that I need... There are 4 options.

  In the Device Manager > network adapters, it there was only one pilot who needed according to this update. The Realtek PCle FE Family controller. When I checked the updates here is said that it was updated successfully, but I am STILL unable to connect to the internet.

  Microsoft say it is a problem of HP, not them. Help, please.

  Thank you

  Hello

  My suggestion: using Device Manager to uninstall the Wireless driver and reboot the machine. Machine should say new hardware installed and find the good jerking for you OR you can download driver Realtek (wireless) from the above link and reinstall it.

  Kind regards.