ENVY 750-197c: unable to connect to WIFI after downgrading to win 10?

Similar Questions

• HP ENVY TS m7 E0K83UAR #ABA: unable to connect to wifi after update to Win 8.1

  The problem is similar to another recent post. Since the update to 8.1, I couldn't access my wifi. It shows also available and has 5 bars, but it is impossible to connect. I tried to connect via the button on the router and it says that it is impossible to connect this way, enter the password. I am able to connect with another pc without problem and able to connect via cable. I am also able to connect to the laptop using my phone hotspot. I have updated the drivers on the network adapter and wireless (centrino wireless-n 2230). I contacted Microsoft and got no help from them. Any suggestions?

  Understand the problem and I guess I should have checked there first. Reset us the router. I just didn't know it would be one I could connect with my old computer and was able to connect with his son-in-law. However their smart TV has not connected and my laptop running 8.1 would not connect to the router. As I said I could connect to the router via cable rigid and also connect ot my hotspot with the laptop. Live and learn I suppose.

• Unable to connect to wifi after downgrade to windows 7 - Lenovo Z580

  Hi all

  Recently, I got my windows lenovo z580 8 for windows 7.

  Installed all the drivers bur everytime I open my connections, it's listed Wireless:

  

  I searched a lot of drivers online but none worked, even the ones I found on the lenovo Web site.

  Here is the code:

  

  I REALLY need a hep with it.

  Thank you very much.

  Download drivers here: http://www.atheros.cz/atheros-wireless-download.php?chipset=70&system=5

• Unable to connect to WIFI after upgrade windows 8.1

  Hello

  I fortunately was connection to my wifi at home last night before my HP Pavilion notebook updated to windows 8.1 g7. Now, I can only connect via ethernet cable.

  I called Microsoft Support and I was told that my wifi driver was outdated and must be reinstalled. I had a look at downloads available for the network drivers, but I'm not sure how to establish that that I need... There are 4 options.

  In the Device Manager > network adapters, it there was only one pilot who needed according to this update. The Realtek PCle FE Family controller. When I checked the updates here is said that it was updated successfully, but I am STILL unable to connect to the internet.

  Microsoft say it is a problem of HP, not them. Help, please.

  Thank you

  Hello

  My suggestion: using Device Manager to uninstall the Wireless driver and reboot the machine. Machine should say new hardware installed and find the good jerking for you OR you can download driver Realtek (wireless) from the above link and reinstall it.

  Kind regards.

• Unable to connect to wifi after factory reset

  This morning I had to do a factory reset on my Presario SR5214X. All came out of it works well, except that now I can't connect to wifi. The only options it gives me for internet connection are broadband and dial-up. WiFi was working fine before reset and I have installed the only network driver update available on the Web site, but it still does not seem to recognize any kind of wireless connection. The computer is a good 5 or 6 years, but it was working fine and all seemed well before. How can I update or install to get the computer to work again with wifi?

  Hello:

  There might be some brands that have this hardware ID, but it shouldn't matter.

  Try the driver for this model.

  http://www.Dlink.com/UK/en/support/product/DWL-G520-802-11g-wireless-LAN-PCI-card?revision=deu_revb

  You can automatically install the driver by running the configuration file once you unzip the download, or you can just install the driver manually by clicking on the ethernet controller in Device Manager. Click on the driver tab, click on set to update driver. Select the 'Browse my computer for the software' and look for the folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  I don't know if the installer also installs the connection software (that I do not particularly like because I let Windows manage my network connections).

  Manually install the naked driver will prevent the installation of additional software.

  If for some reason that this driver doesn't work, then try one of this model.

  http://support.NETGEAR.com/product/WPN311

• Unable to connect to Wifi after new Hard Drive installation

  Hello, I really need help. I have searched this forum days, reinstalled my drivers in the correct order, but I'm still not able to connect to Wifi.

  I have a Dell Inspiron 1545 and I recently installed a new hard drive. Everything works fine EXCEPT the WIFI. In the network controller device manager has a yellow triangle with an exclamation mark inside. I tried to search to find the driver but it says that it is impossible to locate. When I download the Intel driver on the Dell site, it downloads but nothing never opens. I'm at a lost and I just need help. All the answers or pointing in the right direction if this has already been resolved would be greatly appreciated.

  OS: Windows Vista 32 bit

  MizzGi,

  Download and install in this order...

  Dell System Software, v.6.5.0, A05

  Intel GM45 Express Chipset Family, v.8.7.0.1007, A00

  Card reader Realtek RTS5158E, v.6.0.6000.20125, A04

  
   

   

   

  Then, go to the Dell warranty status , enter your service tag, click the original configuration. Look and see what wireless adapter that you have installed. Then, go to the drivers & downloads , enter your service tag, select your operating system and under network, download and install the drivers for your card.

   

   

  Then, download and install Dell QuickSet, v.9.6.21, A07

   

   

  Places to look to see if your connection is activated

   

   

  What is going on?

   

   

   

   

  Rick

• HP Envy m6 is unable to connect/detect wifi but can connect to ethernet

  My HP Envy laptop m6 cannot connect to our wifi connection and connects only using the ethernet cable connection.

  He was always very well when I downloaded windows 8.1 but displays limited connectivity suddenly / no.. I tried everything that I can including reset tcp ip settings via the command prompt, find other drivers until someone suggested me to put my laptop back to windows 8. Still does not solve the problem. Now, my computer laptop is wifi access or detect any wireless so our wifi at home, or other.

  Please do help me. I really need to solve this problem. I am a student and I need bad wifi connection since it is the only available connection in our school. I am not knowledgeable on this subject, and it would be really great if someone could help me.

  Thank you very much!

  Hello

  Please try "Ralink 802.11 b/g/n WiFi Adapter:

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57538.exe

  Kind regards.

• ProBook 4430 s: unable to connect to wifi after software update, only can connect through ethernet

  Need some help here.  This is the second time something like this happened to me but the last time I could happen to someone who could help you by phone.  This time, no luck.

  My computer recently had an upgrade of the software (I think it was an Apple / itunes software update, but I remember now because I chose not to close to complete the upgrade).

  Now I can't access wifi on this computer, however my other computers in the House all the work.  If something is here.  Can anyone help?  I have Windows 7.

  Hi @TomKarl ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your question your of you Probook which is a commercial product. To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  But you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.
  
  Thank you.

• U410 no WiFi after downgrading for Win 7

  Hey everybody.

  I am a newbie in what it is technical so please be nice.

  Recently, I've killed my Ideapad U410 of Windows 8 for Windows 7. Installed all the drivers and all works fine except for the Wifi. He is yet to find a network, it's more like he doesn't even know that there could be something like wifi?
  Has already done some research but I have no idea what could be the problem. Any ideas? If the problem is related to the BIOS?

  I'd appreciate more than any type of help! Thank you!!

  Hey,.

  Thank you for your advice.
  I got the idea to try a pilot Win8 on my now computer laptop Win7 and as if by magic, it works! I don't know why or how but now my WiFi works again.

  Thanks anyway for your advice!
  Kind regards
  Carmen

• ENVY 750-197c: still cannot successfully connect to wifi?

  Hello! I received my new desktop PC (a 750-197 c ENVY) probably about two weeks ago. Since then, I was not able to connect to wifi. The office came with Win 10 which I really didn't yet, so I went down to Win 8. After not being is not able to connect to wifi, I returned to win 10. I could not even connect. The connection attempt process seemed worst in 10 to win, because I have never managed to connect anytime, unlike Win 8 where I could connect perhaps at some super random time briefly for a minute I did my research and checked in high and low for the solutions to the problem. Convenience stores would often come with nothing, or some problems such as:

  • "'one or more network protocols are missing on this computer ' (only on 10 to win)"
  • "default gateway is not available" (On the two 10 Win & Win 8)

  After trying everything, including the netsh commands and update drivers, I was still not able to connect so I bought an external USB (Belkin N300) adapter to test things in case there was a problem with my computer built into the adapter (Intel(r) Dual Band Wireless-AC 3165). I also had to come back to Win 8 given that the new adapter is not compatible with Win 10. I noticed a difference after the installation of the USB adapter - wifi will be done 'connect' now and show 5 bars of signal strength. However, the connection is still not usable. I'll every few minutes or so get a yellow triangle on the network icon and after a repair I will no more no results or one of:

  • "default gateway is not available" (Which Windows will fix in the troubleshooter, but don't always give no internet)
  • "windows cannot communicate with the device or resource (primary DNS server).
  • "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Other times there a yellow triangle but once again, still not usable. I feel at this stage, there is a problem somewhere with perhaps the computer settings? Connect my internet real and router works fine. My other devices connect correctly, including my laptop in the same room with this desktop computer. I tried to reset my router, but it does not solve the problem. I checked that the adapter is configured to obtain the address IP and DNS server automatically, which is. I also tried the netsh commands

  Spoiler (Highlight to read)

  ipconfig/release
  ipconfig/all
  ipconfig/flushdns
  ipconfig / renew
  
  netsh int ip set dns
  netsh winsock reset

  /releaseipconfig ipconfig/all command /flushdns ipconfig ipconfig / renew netsh int ip set dns netsh winsock reset

  still nothing. I really need help to fix this and would be grateful for any help!

  Hi there @KianaLofton,

  Welcome to the Forums of HP Support!  I understand that, after the decommissioning of your system of Windows 8, you have had problems with the WiFi connection and probably the drivers.  I'm happy to help you with this.

  Looking at your previous posts, I feel that Wifi was working before the downgrade of the OS.  Did you by chance do plant a set of recovery discs for your system before moving on to Windows 8?  If this isn't the case, then you want to maybe get a game to the reference level of the system to the factory installation and see if it works again, then we can know that the issue is all about software and drivers, and there isn't an underlying hardware problem.  Computers HP - get HP recovery disks or HP USB recovery disc

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• VAIO SVE151G13W unable to connect to WIFI.

  VAIO SVE151G13W unable to connect to WIFI.

  All other PEDs connect, but not my laptop. All tracks to fix it please. Indication on the bar of legal status at the bottom is a yellow triangle with an exclamatory mark that says internet connections are available. But, I cannot open any page on the net.

  Hello ACM,.

  You can try to open the firewall settings and make sure that your browser is not blocked. You can also try reinstalling your browser or use an everything to a new fact to ensure like google chrome. It will be useful.

• HP 15-ac152sa laptop: wifi tab disappears from the network settings menu. Unable to connect to wifi

  I bought a new laptop. I connected to the WiFi network with no problems the first time. I have downloaded Microsoft office 2016 (home and student). The next time I turned on the laptop, the icon WiFi in the corner of the screen says "no connection available.

  On the tab "network and internet". There is no tab for WiFi. Initially, I managed to fix it by clicking on the 'network card', 'properties' and on the 'power management' tab, I unchecked the box indicating "allow the computer to turn off this device to save power. This fixed the problem... until the next time I turned on the laptop. It's the same thing and I am unable to connect to internet via WiFi.

  The single adapter in the list here is "Realtek PCI-e FE family controller #2". Still unable to connect to WiFi... Still no WiFi tab under settings "network and internet". Help, please!

  So, the problem was finally solved (fingers crossed!).

  Yes, the Internet access worked perfectly every time when it is connected through the Ethernet cable. Ultimately I phoned the helpline. They checked for the new driver updates (these have been already updated), restored the BIOS remotely and then restored the device to the factory settings. Start of the fault still took place intermittently. This indicates a hardware problem, and the unit was sent for repair.

  The idea was that when the WiFi did not work, the WiFi card wasn't physically visiable in the list of available adapters, nor has the Bluetooth adapter. Apparently in this device, the Bluetooth and WiFi functions are on the same network adapter and apparently those elements should not disappear from the list of available adapters. So the fact that they disappeared together intermittently indicated a hardware problem with the card.

  Now that I got my laptop back and I think that the WiFicard has been replaced. Hoping all is well now and I hope this post helps someone else.

  Thanks hp for fast and wonderful customer service.

  Sarah

• Unable to connect to wifi and cannot adjust the brightness in hp pavilion 1322tx g6

  Hello guys. I can't connect to wifi after that I installed win 7 64 bit on my hp pavilion 1322tx g6. Wireless light stays red. He is not white. and I can't adjust the brightness too. the same operating system works very well on my desktop. in the Ethernet controller network controller driver manager and other things are missing. Win 8 64-bit work very well on this laptop. Please someone help me...

  Operating system Windows 7 does not have drivers for the hardware of this unit. your office may be a little older had so drivers win7 disc itself. also windows 8 has most of the current hardware drivers, it works well too.

  for win7 64-bit, you must download all the drivers from hp.com and install on your laptop.

  Here's the direct link...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5227785&prodTypeId=321957&prodSeriesId=5186808&swLang=13&TaskID=135&swEnvOID=4063

  Incase you have trouble in direct link, here are the steps to download drivers for your PC.

  Hello

  Please visit www.hp.com/in and click on support & drivers > drivers & software > type the full model of your PC as the 6100 dv6 dv6-3100 etc... Select your computer model (if the list), or model CTO (for example, dv6-6100 CTO) (who works for the series) now select the operating system you are running. you have the list of drivers for your PC.

  I hope this can help, good luck!

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• Unable to connect Adobe cloud after update the expiration date of credit card

  Unable to connect Adobe cloud after update the expiration date of credit card.

  The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.

  The best option will be to contact Adobe support for this.

  Concerning

  Stéphane