Slow to recognize the key
HP ENVY 15-3040nr Notebook PC. F.06 BIOS, SMBIOS 2.7 runs an Intel core [email protected]
The keys "B" and "N" are VERY slow to recognize when I type, which makes me slow down my pressing one key at a time. The 'BACKSPACE' key is so slugish. I don't have to press harder, just pressed longer so he could be seen.
Hello larryf54,
I understand that some of your keys are slow to respond.
Go to Device Manager and uninstall the keyboard.
Restart the computer.
This uninstall and reinstall the driver for the keyboard.
Here is a link that will show you how to get to Device Manager.
I would like to know how everything goes.
Tags: Notebooks
Similar Questions
-
Hello
some time after the start of my laptop, I'm starting to get a slow response by pressing and holding a button. Which means that, when I release the key the character continue tp appear about 2 seconds more! So, for example if I use the arrow keys, that I do not in the exact spot I need because the cursor will continue several characters to come.
I was told to format and reload my os win 7 all over again, is there anyone with a better suggestion?
Thank you, drorCan you please tell us what model of laptop do you have?
What operating system do you use? Do you use BONES that you got with your laptop?Since when you noticed that slow down the issue of the response of the keys?
When you start the laptop in SafeMode the same thing from happening again?
-
slow to recognize the usb device
I have a Vividar DVR that plugs into the USB port it downloads data. On one of my Windows XP computers, it takes several minutes for the computer to recognize the device. on the other hand, it is instant. What is the problem with my computer and how to fix it?
Thank you
VIC
Hello
1. the problem occurs only on this particular device?
2. don't you make changes to the computer until the problem occurred?
I suggest you to try the steps below and check if it helps.
Method 1: Try to update the latest drivers for your USB using the link below.
How to manage devices in Windows XP:
http://support.Microsoft.com/kb/283658
Method 2:
Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575
Hope this information is useful.
-
I bought a copy of a local Best Buy Windows 7 Ultimate upgrade. I am i the process of upgrading and I were invited to enter the license key, which is not recognized by the upgrade program. I tried to phone Microsoft for assistance, but there is no one at home!
Also awaited reopen any suggestions?
You are more than likely you are trying to use your Windows 7 operating system product key to activate a trial version of Microsoft Office that is pre-installed on your Dell computer. MS Office products have their own set of unique product key and a Windows 7 key code cannot be used to activate MS Office.
You can buy MS Office 2007 in order to obtain a product key that works with your trial version. However all is not dark as if you decide to buy Office 2007 now, you will be more a free upgrade to Office 2010 when it is released.
Microsoft Office 2010 technology guarantee
http://Office2010.Microsoft.com/en-us/Tech-guarantee/Microsoft-Office-2010-technology-guarantee-FX101825695.aspxMicrosoft Office 2010 technology guarantee: FAQ
http://Office2010.Microsoft.com/en-us/Tech-guarantee/Microsoft-Office-2010-technology-guarantee-FAQ-HA101812304.aspxMicrosoft Office 2010 technology guarantee program
http://OEM.Microsoft.com/script/contentPage.aspx?PageID=565882Qualifying products for Office 2007 and Office 2010 upgrade product
Office 2007 Office 2010 product qualification upgrade product
Office Ultimate 2007 Office Professional 2010
Office Professional 2007 Office Professional 2010
Office Small Business 2007, Office Professional 2010
Office Standard 2007 Office Home and Business 2010
Office Standard 2007 military reconnaissance Office Home and Business 2010
Office home and Student 2007, Office Home and Student 2010
Office Basic 2007 Office Home and Business 2010
Office personal 2007 (to the Japan only) Personal 2010 (the Japan only)Word 2007, Word 2010
Excel 2007 Excel 2010
PowerPoint 2007 PowerPoint 2010
OneNote 2007 OneNote 2010
Access 2007 Access 2010
Outlook 2007 Outlook 2010
Outlook with business contact 2007 Outlook 2010 Manager *.Project Standard 2007 Project Standard 2010
Project Professional 2007 Project Professional 2010
Publisher 2007 Publisher 2010
Publisher 2007 Academic Publisher academic 2010
Visio Standard 2007 Visio Standard 2010
Visio Professional 2007 Visio Professional 2010Never be afraid to ask. This forum has some of the best people in the world to help.
-
This can be used for a clean install, I didn't install anything, said
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Suddenly, she considers the invalid key in spite of owning for almost 3 years. Anything I can do to make it work again?
Hello
My apologies for the inconvenience, please see the following links:
Warning: "Adobe software real failure of Validation...". » | Windows
Failure audit download or installation. CS6
Let us know if that helps.
Kind regards
Bani
-
downloaded and installed students and teachers edition of acrobat Pro DC, does not complete the installation. Have a trial version expired always on systems, help
Hi cherylc10083122,
Make sure you use the correct serial key, please check using this link, find the serial number of your product Adobe quickly.
Kind regards
Nicos
-
Windows will not activate a re - install using the key printed on the netbook, I have
I have an Acer Aspire One netbook on which I had to reinstall the operating system because of problems I had. I tried everything to reinstall the OS W7 Starter edition try the recovery disk method or check with the manufacturer (out of Warranty warranty so no support) and without success. Now, when I tried to activate the version of Windows 7 Starter Edition that I had installed on a drive that I bought with all versions of W7 less any key, Windows does not recognize the key, I entered even if it is printed on the bottom of the laptop on the MS license that I HAVE. I have even a paid upgrade to Home Premium I tried to apply in order to activate the operating system, but it says I need to activate W7 Starter first before the upgrade.
Need some advice what to do.
Windows 7 Starter Edition is actually installed?
Click Start, right click on computer
Click on properties
Go to the Windows edition section
Does say Windows 7 Starter?
If this is the case, try to use phone activation:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Recognizing the pressure on the keys without a mouse click
My program beings humans with a frame with a button "play" on this subject. Once he "plays" button the user is taken to the second image to play a game. Game control is via the keys. The control works well; I am able to move sprites and so on. However, my problem is after the user clicks on 'play' and is taken to the second image of the game will not recognize keys until the user has clicked on the cmdlet again. How to make the game to recognize the keys automatically after the user has clicked "play"?
Here is the code that I use in the second picture to listen to the presses:
Try to use stage.focus =; at the top. I did not myself at any time, but it might be a solution.
-
Scrolling speed is fine, but when you press the command key and then it becomes very slow.
He does it with a mouse, but not with the trackpad.
It does when the modules are disabled.
No problem on Safari or Chrome.
No problem on PC.I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.
Any help would be much appreciated.
Thanks in advance!
You use the mouse wheel to scroll?
There are some prefs mousewheel, which control the behavior when you press the modifier keys.
You can set the key to the action of each to 0 for normal scroll.See http://kb.mozillazine.org/About:config_entries #Mousewheel.
-
Satellite A300-1J1 - does not recognize the CD key
Hi all, after 3 days of searching for any type of information I've found this site and I hope that someone can help me.
I have a Satellite A300-1J1, and had to do a complete reinstall of Windows using my recovery disk that was provided with the laptop (Vista Home Premium).
In any case, the installation went well and he had restarted and said I had to activate Windows is not a problem, I thought looked under laptop for key typed in there and it will not recognize the CD as being for Vista Premium key. Now how is that possible that the disc that came with the laptop and the CD key is there?Any help is greatly appreciated
Shaun
Hello Shaun
I know it may seem stupid now, but your story is somewhat strange. Why?
To the first Satellite A300 laptop computers are never shipped with recovery DVDs. Recovery DVDs must be created by the owner of the laptop. All A300 laptop come with what is called HARD disk image. AFAIK some A300 laptop computers come with an additional CD/DVD but it is recovery of Windows XP Home or Vista 64-bit edition, but laptop always comes with Vista Home Premium 32 - bit (recovery of HARD drive image).So the question is what installation media you are using exactly? Is - this support recovery, that you created yourself or a version of Microsoft?
Original Toshiba recovery image is created for each laptop model separately and should not be enabled.Recovery image can not be downloaded. If you want to have another copy, you must order it under https://backupmedia.toshiba.eu/landing.aspx
-
Windows XP does not recognize the product key that is encrypted to ptfb software
Win xp works edition overview of ptfb but will not recognize the product key encrypted for the purchased software.
Hi Gleeb,
The question you posted would be better suited to PTFB support. Check out the link and ask the question.
-
the printer port does not recognize hasp key
I recently bought a Dell rebuilt to replace a running xp sp3 which had overheating problems with windows xp sp3. I am running a previous software (7.5V2 friendly technology FlexiSign Pro) program that requires a hasp on a parallel port key. I never had problems with the old computer recognizing the hasp key, but when I try to use this software on the new computer does not recognize the HASP. I think what may be due to the fact that my new computer printer port is configured as instead of the lpt port ecp. Is it possible that this could be my problem and I can change the port of older style? Any guidance is appreciated.
Thank you
Greg
If the problem really is whether the parallel port in ECP mode, you can switch to EPP mode in the BIOS. Restart the computer and keep a close eye at the beginning of the boot sequence for the message that tells you what key to press to enter the BIOS (change system settings or similar). Restart again and press the key when the message is displayed. You will have only a few seconds.
-
Lite-On ENAU108 CD Burner IT does not recognize the USB key
Windows Media Player does not recognize the USB drive letter
Although the Windows Device Manager recognizes it.
I want to add drive from the device to WMP
Hello
1. have you made any hardware changes or software on the computer before this problem?
2 - is the USB key in Windows Explorer?
3. you try to transfer music files from the USB key?
4. what version of Windows Media Player do you use?
If you use Windows Media Player 11 & try to add media files in Windows Media Player, you can follow these steps.
a. open the Windows Media Player, click on organize > manage libraries > music.
b. click Add and navigate to the location where the file is stored in the Windows Explorer.
Reference: Add items to the Windows Media Player libraryHope the helps of information.
Please post back and we do know. -
BitLocker without TPM refuses to recognize the USB key at startup.
I have a Windows 7 PC, I'd need to BitLocker, but it fails to recognize the USB key at startup. I've resorted to skip verification and now enter the recovery key every time you start (this PC has a lot of data on what should be confidential), but it's not ideal.
What is curious to me, is that the computer will start perfectly fine from a USB key, or produce a message of type "non system disk or disk error", if the USB key in question is not bootable. So it is not a matter of lack compatibility USB BIOS. When Bitlocker should read, yet there is no actifvity on the USB key. It seems to just try to read the empty floppy drive then give up.
The PC is an all-in-one RM with an Intel D915GX motherboard.
I tried two different USB, 64 megabytes cheapo player drives I usually use as a Bitlocker key and a 2 GB Cruzer Blade. I mucked with some of the BIOS settings but not in a particularly organized way. And I checked the key file is saved on the disk. Everything I did, Bitlocker will not always see the USB.
Any suggestions?
Hello
Thank you for you answer and share the status of the issue.
Sorry for the late reply.
I suggest you to please update your motherboard chipset drivers
Follow the link below:
https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=1676
You can also check the drive (that you encrypted) to find errors by following the link below:
Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
WARNING:
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Additional information:
In Windows 7 BitLocker Drive Encryption: frequently asked Questions
http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx #BKMK_USBDrive
Deployment Guide for Windows 7 BitLocker Drive encryption
http://TechNet.Microsoft.com/en-us/library/dd875547 (v = ws.10) .aspx
Hope this is useful
Maybe you are looking for
-
Google on Firefox gets my incorrect location (Chrome and Edge are fine)
Since the upgrade to Windows 10, I had some localization issues when using Firefox. When I search something in Google, I get only US results (we are located in the Canada). However, Chrome and Edge both show good Canadian results. I checked the locat
-
How can I change the username itself, not only the password.
Hello How can I change the username itself, not only the password please? Cheers, Guy.
-
Hello I feel soft and dull pictures with my Canon EOS 7 d with a 17-55 mm EFS. Maybe it's the operator error, but I wonder if the focus of the brightness settings are out of wack. I expect more tight overall focus. No matter what I do I can't seem to
-
Where to get the disc to install Windows XP to a laptop?
I have Windows XP on laptop Dell which has been somewhat altered after trojan (I bought antivirus and he killed). I still can't use my old programs but new installation always fail. I'm ready to install everything from scratch, but WHERE to get the i
-
Computer is slow it says download adw cleaner
Original title: Window 7 Pro-32 - download adw-Mbar-vacuum cleaner My computer start sometimes slow, sometimes it is slow Google for gmail, someone said that I should download adw cleaner and run it then download Mbar and run it, and I should downloa