Slowdown on time - Low CPU, GPU, RAM, HARD drive use

Similar Questions

• Satellite A35-S159 - can I upgrade the CPU, GPU and HARD drive?

  Hey

  I have one in my possession and I wanted to make a good game.

  I don't know if I'll be able to cause. It hurts thinking may be able to put a processor duo or quad, and I do not know if the CPU will be able to support a really good graphics card, and I also think about changing hard drive.

  Any1 know what hard drives are compatible with what I can use which are good for games?

  Hello!

  I m wondering that you want to upgrade this old notebook. In my view, that a new laptop would be a better solution.

  On the CPU and GPU upgrade I can only say s is not possible and not Toshiba support. The GPU is soldered on the motherboard and t can be exchanged.
  I think you should read this: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  The HARD drive can be upgraded. This isn t a problem.
  AFAIK the A35 Satellite is equipped with a s IDE HDD and this means that you buy a drive HARD IDE interface up to 128 GB.

  Good bye

• Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  My drive hard mac failed and I got a new drive to come. I save the news a few weeks before the accident with time machine.

  Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  Hello

  Transfer of the installed application would not work properly.

  I advise you to install the application again.

  Kind regards

  Sheena

• I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. It's saying that the product may be false and it will not be installed. Any suggestions?

  I'm trying to install Adobe Creative Suite for the first time since I replaced my hard drive on my computer. That is to say that this product can be wrong and it won't download. I downloaded before and didn't have any problems. Any Suggestions?

  Use one of the links below

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck

• Why can't I do a search in my external hard drive using Adobe Bridge CS6?

  When I open Adobe Bridge CS6 and try doing a search within my external hard drive, it will give my internal hardisk results only? This is the 1st time that I encounterd this strange issue. For this reason, I do my research with windows and then browse each result with bridge! which is really annoying.

  I solved the problem go on the search field and clicking the search icon where he will give a drop-down list of the 3 options, and then selecting bridge search: current folder and that solved my problem. Thanks for all help

  Date: Wednesday, August 14, 2013 06:45:55-0700

  From: [email protected]

  To: [email protected]

  Topic: Why I can't do a search in my external hard drive using Adobe Bridge CS6?

  Re: Why I can not do a search in my external hard drive using Adobe Bridge CS6?

  created by Curt Y in the General Discussion of bridge - see complete discussion

  You can search for an external drive if the operating system permissions are OK.  Bridge, however, will not look on different drives.

  Please note that the Forums Adobe does not accept attachments to emails. If you want to embed an image on the screen in your message please visit the thread in the forum to incorporate the image into the http://forums.adobe.com/message/5593774#5593774

  Replies to this message received to everyone subscribed to this topic, not directly to the person who posted the message. To post a reply, or reply to this email or visit the message page: http://forums.adobe.com/message/5593774#5593774

  To unsubscribe from this thread, please visit the page message to http://forums.adobe.com/message/5593774#5593774. In the Actions box to the right, click on stop Notifications by e-mail.

  Start a new discussion in the General Discussion of bridge by e-mail or at the Adobe community

  For more information on maintaining your email forum notifications please go to http://forums.adobe.com/message/2936746#2936746.

• loading html document stored on the local hard drive using the 'flash' button

  Hello! I use adobe cs 5.5 flash (action script 3), and I need to load an html document into my hard drive using the 'flash' button I tried navigateToURL (thanks kglad). Here is the code:

  quizstart_btn.addEventListener (MouseEvent.CLICK, arithmeticlesson);

  function arithmeticlesson(event:MouseEvent):void

  {

  navigateToURL (new URLRequest("file:///C:/quiz/truequiz.html)", "_blank");

  }

  But I want to play my flash file to the other computer. In order to access the truequiz.html, I'll make a folder named quiz to C:\.

  How can I load this html file to other computers without creating a folder to C:\? Sorry for the dumb questions. I'm new coding. Thanks in advance!

  Is there another html file that includes the swf file?  If so, it is in a different folder, then you need to adjust the path so that the swf file target html file as if it were in the same folder as the html page that incorporates.

  Are other than that, you getting any kind of error message from security to try to link to the page in this way?

  I really enjoyed my visit here.  We went in February, the coldest time of the year, and when I got my mother-in-law apologized for the cold, it was then that I was just there dripping with sweat.  Where I am now (upper NY) it is-10 degrees...  If here and there, I'd be a temperature controlled indoor environment.

• HP Pavilion p6290d: change to smaller capacity desktop hard drive using the recovery disks

  Currently my hard drive (750 GB) is having a problem. I have a spare hard drive (500 GB), I can replace the 750Go with the 500 GB hard drive using the recovery disks that I created when I got the pc?

  Hello:

  All I can say is that you have nothing to lose to give a try.

  500 GB could be sufficient to allow the recovery discs, you did to work.

• How can I restore my backup files on an external hard drive using Windows XP SP3?

  I back up my files to an external hard drive using windows XP sp2. My pc crashed and re installed with Windows XP sp3. Now I can't find the backup on the system tools utility. How can I restore my backup files. Help, please.

  Hi PML.

  Yes, I used the built in «Back to the top of the tool» Unfortunately I don't have the CD. My Netbook is a HP mini computer that comes with Windows XP home. Thank you for your help and I hope to hear from you again.

  How do you reinstall Windows?  If you have used the HP Recovery system to recover from a hidden partition, backup should have been reinstalled.

  I suggest you call HP support.

• FAT32 formatting for 500 GB Seagate external hard drive using Windows Vista

  How to format FAT32 file system for 500 GB Seagate external hard drive using Windows Vista?

  Hi MVRMVR,

  Windows will work generally only format a drive in FAT 32 if it has a capacity of 32GB, no more. To format in FAT32, Yes, would need to create multiple partitions. This, of course, you don't want to do.

  I have not tried to format a large drive in FAT 32 but I guess that any third-party partitioning software (Acronis, Paragon etc.) would be able to do it without any problem. Alternatively you can do it from the Windows command prompt. For more details, see the link below:

  http://www.online-tech-tips.com/computer-tips/formatting-external-hard-drive-to-FAT-32/ John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• HP Pavilion Ultrabook 14-b005ea upgraded CPU + ram + hard drive

  HP Pavilion Ultrabook 14-b005ea on Windows 8 (64-bit)

  I want to upgrade my sleekbook processor an i3 to an i5, I also would like to upgrade this laptop computers hdd + ssd cache to an ssd of 256 GB full so that increase the ram of 4 GB to 8 GB. can someone help me with this? Thanks in advance.

  Here is the Service Manual:

  Manual

  CPU:

  More quick possible:

  Intel Core i5-3317U (1.7 GHz, turbo up to 2.6 GHz 1 600 MHz/3 MB L3 cache, dual core, 17 W)

  You have:

  Intel Core i3-3217U (1.8 GHz, 1 600 MHz / 3 MB L3 cache, dual core, 17 W)

  The i3 you have is actually faster for most purposes than the i5, although the i5 has Turbo. I would not bother with this upgrade. It is the most difficult and expensive. The processor seems to be welded on so it would take a whole new motherboard, I'm sorry to say. At least try upgrading memory and SSD before committing to try upgrading the processor.

  Memory and hard drive:

  You can install up to 8 GB of RAM and you can install a reader mSATA. However, the memory and the mSATA drive slot are on the back side of motherboard and not easy to do. See Page 59 and transfer to the manual. In general, this model does not have an update very easily. You can replace the hard drive on a regular basis with an SSD without having to remove the motherboard, but it is still much harder than the mobile way. See pages 47-49.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Time Machine restore on nine hard drive Crash

  Hi people, so here is the scenerio... End model 2009 IMac 3.06 ghz Intel Core 2 Duo, screen 21 1/2 in., 500 GB, 12 GB of ram installed, the year has been saved on external hard drive Time Machine 2 giga... The computer has been works fine, the only thing I had to improve more of hard drive space, bought a Seagate 2 TB, SSHD (ST2000DX001), checked with OWC internal drive and they said it was compatible, Swap out went good, but when I went to restore the new drive on a time Machine, the installation of the time machine crashed I tried 3 times

  so I started fresh and installed the operating system and set to update all the way up to 10.11.2 el captain (of the installation disc 10.6.1) so the material looks good, but I really need my system to the way it was, music, ITunes, Safari and registered Web sites and my files important work

  I just did a check for first aid at the back of the drive, come good... any suggestions would be appreciated, thanks

  Is there any system or Crash logs from the time of the TM install crash?

• CPU AND ram supermetric of use

  Hi all

  I use vcops 5.7

  I need the alarm when using cpu and ram are two < 40% for a week on a host system.

  I think a supermetric can help me, but I don' t know how.

  I think that something like this:

  If (< 40 CPU usage) AND (use of mem < 40) then supermetricvalue = 1

  can I define a KPI like this: If supermetricvalue = 1 to 840 collection and then alarm

  but I don't know if it is possible to define a supermetric like that.

  Any suggestion?

  Thank you

  IG

  better try this with an alert at several levels.

  Help:

  ------------

  Configuration of Mulitilevel alert rules

  You can configure alert rules complex that evaluate several conditions on related resources. For example, you can write an alert multi-level rule that generates an alert if the workload on a VM exceeds A to B cycles, health is less than C and the host CPU usage is greater than the dynamic threshold.

  Because the conditions of hard threshold in several levels alert rules generate no additional alerts, multilevel warning function reduces the number of alerts and allows you to that you will concentrate only on important alerts.

  Alert rules several levels do not have a specific alert type in vCenter Operations Manager user interface. The user interface displays an alert at several levels in the form of alerts KPI HT, but the alert description identifies the alert for Multi level rule. Triggers and the details of the rule appear in the pane of the reason on the Details of the alert page. Multi-level alerts are also visible as violation HT KP in mashup for the alert graphic and INFO displays the details of the rule.

  ------------

• I have an attached external hard drive, I selected through Time Machine. But Time Machine also save the hard driver separately?

  I have an external hard drive attached I selected through a Time Machine, I found in the system preferences. Is - this time Machine even save the documents that I have on the hard drive? In other words, I want to be sure I have two back ups until I upgrade of the OS,

  Time Machine backs up all the readers who were not placed in the exclusion list.

• Maching time keeps failing - bought new hard drive and still the same problem

  I'm on a mac 27 inches, El Captain 10.11.2 upgrade

  Not had a problem for years and then suddenly about a month or two before, he started to do all the time. Got a mybook 2 TB for mac for Christmas - same problem. Works perfectly for hours/days at a time, and then fails again. Don't know what to do!

  

  

  I know it sounds weird, but I would like to start by making sure that your Mac hard drive is correct. Demarrer start on the recovery environment, run disk utility and perform first aid on your hard drive. You can also perform a boot secured, which does essentially the same thing.

  I also saw problems with USB devices that appear only on a specific USB port. Try changing ports.

  The external drive is new does not mean that it is not defective. Perform first aid on the external hard drive and reformat. Better still, try another drive altogether to eliminate the drive as the source of the problem.