SLT A65 Audio no longer works

Hello. Since the 1.07 update, I no longer get a beep when the focus is locked. I get no audio at all. Is there a solution, as the reloading of the update? Can you help me please? Thank you, Dan.

Have you tried specifically to change your settings for autofocus? If your auto focus is set to continuous AF (AF - C), you will get no audio signals and focus lock not like you half press the shutter button. The camera will focus at all times, and this setting is ideal for subjects that are in motion.

If you set the Single-shot AF (AF - S) autofocus mode, you will get audio signals and focus lock as you half press the shutter button. This setting is ideal for stationary subjects.

If possible, try to further isolate the issue by using other lenses with the camera. In this way, we can check if the problem is with the camera body or lens you use.

It is not possible to recharge the update, because the firmware update software detects that your camera is already a current version, if you try to update again.

If this post answered your question, please mark it as "accepted Solution".

Tags: Sony Products

Similar Questions

  • Audio no longer working showing Audio device not found on new HP ENVY 15 Notebook PC TS

    HP Audio CODEC high definition

    Windows 8 bit of b64

    Any audio just stopped working watch on mute, as most any audio device.

    Any chance to try before returning

    Problem has been resolved. By installing Windows 8.1 who come back a little and then installation of beats audio for Windows 8.1 solved the problem.

  • My Beats Audio no longer works

    I have a HP Envy 15 notebook PC running Windows 7 64-bit 3040nr.

    Every time when I Hibernate my laptop, I can't close the lid of the laptop, or he will report CPU overheating. When I start Windows after overheating what we call, the sound always loses and I found a solution here

    http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-envy-15-3040nr-sound-stopped-working/TD-...

    For several times it worked perfectly, but this time where I followed the same step, the noise brought back back, but the Beats Audio is lost.

    When I touch the volume button on the side of the laptop, the icon has changed since the Beats Audio icon for this , which shows that the Beats Audio is disabled.

    However, the Beats Audio settings in the task bar icon correctlyand works by Beats Audio settings. When I move the faders, the sound effect changes, but the small Beats Audio box never works. When I click on it, no sound change happens, and when I close the window settings and reopen it, the box clicked again shows.

    It seems that the Beats Audio is installed correctly, but does not. I tried several different versions of the IDT audio driver, but all have the same problem.

    Oh I found the solution to my self!

    When you uninstall the sound driver and restart the computer, the system automatically installs an audio driver for you, but its driver is not compatible with Beats Audio. I need to uninstall this driver as well and reinstall my downloaded driver.

  • Audio no longer works

    I have Windows 8 running on a Dell computer.
    Audio stopped working in email (Thunderbird). The image is fine--is no sound.

    You mean Notification sound?

    If so, visit this link

  • Re: Satellite Pro C650 - Audio no longer works

    Hi all.. I have a C650 - PSC09E-00501PMP er # 7A267273Q

    In recent times odd weeks I noticed the audio thro' speakers default... but a reboot was ok...
    But today I am unable to get the speakers audio thro all... even if its earphone thro ok O/P.

    Nothing on mute and shows the audio level and varies by activating the speaker (mixing table) icon.

    Conexant CX 20671 shown works well in Device Manager... Driver 4.111.0.64

    Tried a system restore...

    Everything looks OK on the control panel of configuration/sounds tab

    Would appreciate any advice... Thanks in advance...
    Norm

    When you unplug the headphones and open the sound properties > reading device is set as a default?

  • T420s: audio no longer works after update to 8.1 Windows

    Hello.

    Conexant SmartAudio HD (driver 8.32.43.0) 20672 stopped working after I updated to Windows 8.1.

    Everything looks ok, no error message when I start up Windows and Device Manager shows no "this device works properly.".

    But when I try to play a file on the Zune or VLC, I hear no sound. When I try with music metro app, an error that says:

    "Can't play. Make sure that sound cards and video of your computer are working and have the latest drivers, and then try again.

    0xc00d11d1 (0x8007007e"

    I tried the troubleshooting tool, but it is said that he could not identify the problem.

    Everyone had the same problem?

    Thank you.

    After you remove the audio device via Device Manager and rebooting, the problem has been resolved.

  • TouchSmart HP ENVY 17 t-j100 as: audio no longer works since 3 days

    No audio device is installed is the message I have current when I try to play what be it recently. How / where can I find and re install the audio device software and drivers for my computer. I tried all the solutions listed for others, but none work for me

    I'd appreciate any help with this problem since I can not at this point playing any music or videos. Befor today Ihad no problems with audio

    Wprked suggestion for the help thanks

  • After full system recovery, wireless and audio no longer work on R61i!

    Hi all

    I recently did a full system recovery on my thinkpad r61i and restarted my computer, I noticed that my wireless network no longer appears under my network connections. The only thing that appears is my local network. In addition, my sound no longer. Is it possible that somehow my wireless has been deleted during the system recovery? What should I do about restoring wireless on my computer, but also the sound? Advice would be useful! In addition, the switch wireless on my computer is on.

    I solved the problem. I went on the Lenovo Web site and downloaded the Wi - Fi drivers and audio missing.

  • After Firefox update 11/13/2011, audio no longer works

    I take a course online and since Firefox updated tonight, I have no sound with video. It is the same for any u tube, etc.. No sound. The video is good, just no sound. Imperative that I get sound back. I guess that's a few add-on which was disabled, but I don't see anything in the EXTENSIONS section, which would be linked to this.

    I had my son take a look, and he concluded that the button MUTE on. I have no recollection of the snap at any time, but when it was turned off, everything was fine.

    Good luck.

  • Audio does not work after upgrade Windows 10 (Lenovo G780)

    After my upgrade to Windows 10 on my Lenovo G780, it seems that my audio no longer works. I tried plugging my headphones as well to see if I had audio coming through here, but it does not appear in the peripheral reading window when it is plugged.

    The laptop comes with Conexant SmartAudio HD and lists also high definition Audio device in Device Manager.

    Could someone help me and let me know if there is a problem that I monitor.

    I found a page that contains some Conexant software for windows 10 but I don't know if they are updated drivers or if they support even my machine (the page does not support for G780 list).

    Any help would be appreciated. Thank you.

    After a few tries, I finally got my audio to work and hope it does for you too. What I did close my computer completely as opposed to stopping in the hybrid stop mode. To stop your computer completely, right click on the Windows Start icon and scroll down until closing or disconnect and select stop down in the list. Your computer shuts down completely. Turn on your computer again (start will take a little longer than usual) and check if everything is in order.

    As I mentioned earlier, my audio back after doing this. It will be useful.

  • After installing iOS 9.3.4 audio accessories / load is no longer work with iPhone 6s

    Reference: iPhone 6s with iOS 9.3.4 and Pro iPad with iOS 9.3.4

    Colleagues:

    After the installation of the audio 9.3.4, iOS and other accessories is no longer worked / accused with the iPhone 6 g & iPad Pro.  Before the update of iOS, all accessories worked exceptionally well with the iPhone 6 g & iPad Pro.

    So far, Accessories Bluetooth will continue to operate with few problems.

    Please advise and assist the...

    It would be useful that you said what accessories do not work and what troubleshooting steps you have already done.

  • Audio and video files that has already worked on my computer no longer works.

    Audio and video files that has already worked on my computer no longer works and I get one of the three messages which are as follows:

    (1) the file can be used (but it is not used by another program, and then media player that I use to try to read the audio/video file)

    (2) you may not have access to the location of the file (and yet I am the administrator of the computer, I am the only user with access to the computer and I installed the files myself and they have worked fine up until now.)

    (3) your proxy setting may be incorrect (I use automatically detect my proxy settings that is the same settings I use for my network and the Internet.)

    All of the files in question worked previously but now continue to show these problems. If anyone can give me any information as to how I can get these files restored to their values of work please feel free to respond below or send a personal email with your solutions to * address email is removed from the privacy *

    Yours,

    Brent

    Hi Brent,

    You can try to uninstall last updates window who installed or do a system restore to a point before the updates have been installed and then install updates one by one to see which update is causing the problem.

    Method 1:

    You can read the following article to remove an update.

    Remove an update

    Method 2:

    If you cannot uninstall the updates, then you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    To run the system restore, you can consult the following link:

    System restore

    System Restore: frequently asked questions

    Method 3:

    Try to install updates one at a time to see the update is causing the problem.

    Install Windows updates

    Hope this information is useful.

  • Audio Jack of my HP Envy 4 no longer works

    Hi all

    I bought the HP Envy 4 just one 4 months ago and now something worong with his audio jack for headphones and its no longer works. The hardware profile for this audio jack shows no errors, but its still does not. Y at - there someone who can help me on this problem?

    Kind regards

    Thanks for the information.

    Please follow the instructions in this document for troubleshooting HP.

    Based on the content of your original post, you have already completed part of the troubleshooting process.

    You said that "tried to set default sound still does not solve my problem."

    Please explain what you mean by "tried to set as default device". This means that you have failed and the green check mark does not appear?

  • I bought my dell studio with webcam 2010. Not long after that I bought the audio has stopped working. What is so frustrating, is that there is no troubleshooting feature...

    Why dell webcam is not a feature of troubleshooting? Is is just a piece of garbage that is thrown in to make believe that you get something of value?   the audio has stopped working shortly after I bought it and there is nothing that I found to try to recover

    Hi Susan,.

    1. are you able to hear the system sounds?

    2 are you facing any problem with Dell webcam?

    3. What is the number of the model of the computer?

    Method 1:

    Run the hardware and devices Troubleshooter and check if that helps:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    To resolve the problem with the sound, I suggest to refer to article and follow these steps:

    No sound in Windows

    If the problem is not resolved, please respond with more details.

  • Beats Audio does not work! Features totally lost!

    Computer laptop HP Envy Touchsmart 14 specifications

    Processor - Intel i5 4th Gen

    NVIDIA GEFORCE graphics

    Hey there,

    I recently updated my laptop for Windows 8.1, and there has been problems galore. Beats Audio has stopped working. It seems rather, he is always on even though I don't want whatever. Using fn + B does not help, nor does the activation or turn it off via the control panel Audio Beats. Initially I couldn't even check box on the tab 'Listening experience' in the control panel. After you follow the steps in this thread - http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Can-t-turn-on-Beats-Audio/td-p/1201775

    Now I can manage check or uncheck the option in the Panel, but it has NO EFFECT.

    This turns out be extremely annoying, please help me understand this.

    Hello piezoelectron

    I'm sorry it took so long, but I think I have the solution for you here. I've updated a notebook here to 8.1 and after several attempts but I have the same problem you have. To solve it, I simply used the Recovery Manager to update the HP Quick Launch software provided on the laptop. Try following the steps below to see if that solves your problem.

    Step 1. The type of menu tiles "Recovery."

    Step 2. Choose Recovery Manager

    Step 3. Drivers and reinstall Applications

    Step 4. Choose the software of HP Quick Launch

    Step 5. Install

    Step 6. Restart your computer

    Now, this did not bring the Beats Audio Control Panel for me but he doesn't turn Beats Audio on and off the listening experience which is what you're after.

    I would like to once again thank you for posting on the HP Forums and hope that this solution solves your problem. Have a great weekend!

Maybe you are looking for

  • LPX will play not any sound, any way to fix?

    Logic Pro X leave while I was downloading Nexus 2.2.1 I tried reopening LPX, it gave me an error message. I opened LPX while maintaining the control key and selecting no to basic audio question. Since then, I was able to find LPX, but now, I have abs

  • Satellite Pro A300 PSAGDA won't start at all after flash Bios 1.90

    I have an A300 PSAGDA-01Y00R. I tried to Flash the bios to version 1.90. He started the process, and when I came back an hour later the cell phone was off. When you turn it on, it has nothing now. I tried removing the battery and running on sector on

  • Win 8 problem

    I have notebook Probook 4540 s, I tried to install the guard dogs, after restarting windows does not start until correcly, a black screen with cursor of Charlotte and wifi icon, what should I do? I'm in safe mode now :/

  • Turn off the display in Windows 7

    I need a script or command to put the screen of one computer. Note: don't want additional software of PS script. I need run this user level access.

  • solution to get the upgrade windows 7 to windows 8

    Help me convert my windows7 home edition 64-bit windows 8 with any format or remove data from my laptop.