Small tips ESXi deployment/assessment
Hello. I would like to try something on ESXi free edition deployment before committing to all kinds of licenses. I have two quad core intel E5405 with 24 GB RAM for virtual machines and dual gigabit ethernet. Each machine has 2 WD RE3 drives 7200 SATA 1 TB I can mirror. I'm not sure that's the best configuration first. I would get 5 4 GB VM by machine. I am concerned about a material (IE what might work better) and backup software strategy (I read that esxi is limited). I got my network remotely to start and stop VMS as well to understand the health of virtual machines are important. I have IPMI on these machines therefore have significant ability to remote control on the equipment itself. I wish that this deployment do not have to change that much if I decide to license and which can resemble this path. Looking for advice. Thank you very much.
Hello
Check out the Virtual Networking Articles referenced for a description of security, redundancy, performance of virtual networks.
Best regards
Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
"Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
[url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]
Tags: VMware
Similar Questions
-
Can IPS deployment limit political from the traffic speed or router?
Hello
I have a small question: can deploy IPS traffic rate limiting political to Cisco switch or router?
As we know, IPS sensor can throttle suspected trafficking instead of block, don't know if IPS can send policy lever swtich cisco gases or the router.
Thank you
-Alejin
You will find the following on what the PPE can do in terms of rate limiting (it also includes what signature and what routers, what must be configured and what not to set up, etc.):
http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/IDM/idm_blocking.html#wp2005501
The above is on IPS version 7.x.
Hope that helps.
-
Deploy multiple virtual machines on several hosts evenly?
Hello people!
I wrote a small script to deploy many virtual machines on several hosts at random.
But I would rather deploy a virtual machine to each host in a table and then start over again until the number of virtual machines to deploy exhausted. Distribution of the burden of deployment as evenly as possible.
Anyone have a suggestion? Example of nested loops?
PowerShell beginner, here.
Thank you
romatlo
One way to do this is with the modulo operator (%), something like this
$numVMs = 11
$tgtEsx = get-Cluster "Westcreek | Get-VMHost-name z420 *.
1.. $numVMs | %{
[New-VM-name 'Test $($_)' $tgtEsx[$_%$tgtEsx.Count - VMHost]
}
-
Auto deploy a Post Install Actions
I'm trying to find a good solution which will create a VM to a model as a post install activity after a 5.5 ESXi host is created via Auto deploy. Here's the general idea...
Bare metal-> ESXi (deployed self)-> create Virtual Machine (s)
The whole process needs to be automated. Power on the host, ESXi installed, created virtual machines... done. I thought that vRealize Automation (VRA) that comes with vCenter might be the way to go, but I don't know how would be VRA called/activated at the end of the auto deploy processes. Are there other options?
I was talking with a guy on IRC #vmware and he stressed the vRealize Auto deploy plugin which can be the way to go. Post the link here in case someone else needs it...
https://my.VMware.com/en/group/VMware/get-download?downloadGroup=VCO_AUTODEPLOY_PLUGIN_510
-
ESXi Homelab on Fujitsu ground Econel 100S 2 - best options?
Hi all
I just bought a Fujitsu ground Econel 100S 2 Server and I'll use it as a small house ESXi lab.
It has a Xeon E3110 (3 GHz, cache 6 MB dual core), 8GB ECC RAM, x 2 250 GB HDD s that can be used in a RAID 0/1, but I hear Internet research that ESXi 5 will not see the drives in RAID, but not sure of the version 6?
In any case, what are my best options for this machine? Especially what ESXi version should I use and should I try to get RAID 0 work or it will be better to use only the 2 drives as 2 separate of data warehouses with VM on each (from a performance point of view).
I haven't used ESXi 3.5, so any advice with this is greatly appreshiated.
Kind regards
Jason
as a laboratory at home, I recommend you to install esxi 6.0.
for performance reasons, I recommend you to do a raid 0 with two drives for maximum i/o performance.
If your raid logical drive is not recognized, you can search on the internet for readers... maybe that's the problem why esxi does not see the disk...
either way I would use iso custom of fujitsu... There are probably several drivers for your hardware
-
Tip action does not work when I add a second block of decision
I'm writing an advanced action 8 Captivate. In response to a question about the points, the user types a number in a text entry area. When they support, the fast action will assess the number. If it is 10, the program should jump to a slide that shows that 10 is the right answer. (When I do just that in a single block of decision, it works.)
However, the full tip action must assess if the value is higher or lower than 10, then return the user to the question slide and displays an appropriate message. When I add the part in a second decision block, advanced action performs as expected if an incorrect value is entered, but does not work if the correct value is entered. It does is display the question slide once again.
Here is the code:
Any ideas on what I am doing wrong? Should there be an ELSE statement in the first block of decision? I tried to continue, but that did not help.
-Stuart
The logic of your advanced action is not correct. All decisions are always evaluated. What is happening here is the following:
- First decision check if var is equal to 10; If this is the case, it will change to slide 2
- Second decision check if var is greater than 10, if it is accurate, it will move on to slide 1. I guess the capPoints1High is ON slide 1?
- BUT here's the logic bug: If If is not greater than 10, which is also the case when it is equal to 10, it will change to slide 1, although already, he jumped to slide 2 first with the first decisioin
Two possible solutions:
- decision of the switch 1 and 2 (one easier)
- remove the ELSE part of decision 2 and create a decision 3 to check if var is less than 10
-
ESXi 4.1, ESXi 5.1 - migration of data base and other issues
Hello, we have a pretty small environment ESXi 4.1 Enterprise Plus
with 3 guests. We have a standalone physical SQL server that hosts the database
and a VM Server 2008 64 bit running vCenter. I wanted to use Server 2008 R2
for the vCenter, so I intend to install a new VM running this OS. Is it possible
the new basis of use 4.1 existing vCenter 5.1 (I guess he needs to)
mise_a_jour/migration) and have 3 4.1 ESXi hosts to vCenter 5.1 report? I have
then remove the vCenter 4.1 and upgrade the hosts of 4.1 to 5.1. The
Another option Im contemplating implements the vCenter 5.1 with a new SQL
database.Also there are issues keeping the hosts at 4.1 when using
vCenter 5.1 for a few weeks?Thank you!
Is it possible to have the new vCenter 5.1 using the existing base of 4.1
Years: This is not possible, during the upgrade to vCenter Server 4.1 to 5.1, I saw the database schema changes. Schema be compatible freshly installing vCenter server 5.1 and connects to the 4.1 database and do not support.
A report of hosts ESXi 4.1 3 Center 5.1?
Years: It is possible, ESXi4.1 works seamlessly with vCenter Server 5.1. Once you upgrade to vCenter server 5.1 level, all the host esx4.1 will connect to improved vCenter Server 5.1
The other option I'm contemplating implements the vCenter 5.1 with a new SQL database.
Years: you lose all configurations and need to connect ESX4.1 to the new host Server 5.1 and reconfiguration
Also is there any problem keeping the hosts to 4.1 using vCenter 5.1 for a few weeks?
Years: As mentioned above, it works and it is compatible.
-
Invalid or corrupted partition table esxi 4.1
Saludos a todos,
I have a problem with updated esxi 4.1
(1) hize los raid desde cero con 1 totally controladora del servidor are only estos wont tenian esx 3.5
(2) do los HBA 'fibra puertos '.
(3) comenze the instalacion of esxi 4.1
Instale esxi 4.1 en unos servidores dell 2950 instalacion comienza normal sin errores despues of the instalacion me of that review the HCG en vmware.com
y if the small supports esxi 4.1 version
entonces sale me una opcion reparar y disco y reparar el disco después pulled me this message
Invalid or corrupted partition table, your server has been put into audit mode you have recreated the partitiond on your disk manually
depues of esto el Server pide el reboot y el Server inicializa pero normal al puro final al da UN error con letras rojas pero too rapido para despues el Server levanta although tighter is configura y todo normal sin problemas, pero if is reincia el server is pierde config 'tcp/ip', 'dns' etc.
hecho el proceso instalacion achieve several veces y da el mismo problema
tambien trate recreear las recording manualmente por consoled pero no lo prevalence
his las particiones than veo desde estas consoled her
Device boot start end blocks Id system
/dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p1 5 900 917504 5 extended
/dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p4 * 1 4 4080 4 FAT16 < 32M
5 254 255984 6 FAT16 /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p5
255 504 255984 6 FAT16 /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p6
/dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p7 505 614 fc 112624 VMKcore
615 900 292848 6 FAT16 /dev/disks/NAA.6001ec90ea001c00156f951906d29aa6p8Saludos,
Hola Warrenjc:
What controladora disco tiene ese servidor?
Probaria an instalar ESXi in a nightclub RAID sin unico y falla test TR an instalarlo UN USB en. Of este modo can detectar el fallo viene por controladora Quebec City if no este soportada.
A greeting.
-
Convert the VMs of Vsphere ESXi 4.0
I need to convert / put several computer images virtual of a cluster of vSphere to ESXi 4.0 stand-alone servers.
I've been using vCenter Converter and some pictures are really time consuming to convert (to most probably caused by the network...)
Is there a better way to do it?
Is there a quick way to do it?
Any help would be appreciated. THX!
There is also another way.
If you have vCenter Server (you are talking about a vSphere cluster), you can put in the time the ESXi in assessment, add to vCenter and use the migration of vCenter.
André
-
Need ESXi owns hard drives for the installation?
I downloaded ESXi for assessment and have problems with the installation.
Try to load it on a Red Hat Ent. Linux v5 server that has a logical drive 1 TB.
During the first steps of the installation, it is said that if I keep data on this singular logical drive will be lost.
Does this mean I need to repartition my raid at 2 logical drives and reinstall RedHat with the ESXi before you start?
Help, please
Chris
ESXi is a bare metal installation. It will not coexist with another OS. Once ESXi is installed, you can install Redhat like OS as a virtual machine.
-
Using free space on the disk in ESXi 4 USB Installer?
Hi all
I've got 16 Stick of 2 GB USB DRIVE that I installed with VMWare ESXi 4.0 and the patch for later, someone has already tried to use the remaining free disk space, or it can not be used at all?
I'm just curious, and I was wondering if we can optimize.
Thank you.
Kind regards
AWT
One of the reasons for esxi works well on a USB key is that she is not much written and that he didn't need to do much. Take the 16 GB House and a small for ESXi. Don't risk your production environment.
-
How to set the parameters of the ipmi/ILO for feeding from a script management?
I have an installation script entirely work for our guests esx4, the only thing missing is implemented ipmi/ILO settings.
I searched and can't find answers for this, anyone know how to do it from a script?
If it is ESX, so part of your kickstart could generate the thumbprint and download these results on a NFS server including vMA has access to perhaps a list of host names + digital fingerprint. You could write a small script which basically monitors a directory for updates and then automatically add to vCenter once the system is ready to go, you can probably do something similar with ESXi, but it will be more complicated that you have not a real way to "launch" the host. However, you can change the image and put your own scripts such as a python script to extract the footprint and again do the same thing by dumping at the exit of a volume shared including vMA has access to.
If you are interested in editing script ESXi, take a look at 4 part of Maish's article on how you can configure the ESXi ping to a management host host - http://technodrone.blogspot.com/2010/04/esxi-deployment-solution-beginning.html
=========================================================================
William Lam
VMware vExpert 2009,2010
VMware scripts and resources at: http://www.virtuallyghetto.com/
Introduction to the vMA (tips/tricks)
Getting started with vSphere SDK for Perl
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
-
Distributed Virtual Switch supporting guests with different numbers of natachasery
Our environment has had the same ESXi host model for some time. Each has interfaces from 2 to 10 GB for the traffic of the virtual machine. We use a virtual switch distributed with 2 uplinks. Now, we stand at a new environment where there are 2 types of hosts. (1) a small workload ESXi host with interfaces of 2 to 10 GB and (2) a large load of work sESXI host with 4 to 10 GB interfaces. They are seperasted in 2 groups (large and small workload workload).
I had planned to share a Distributed Switch between the 2 groups, so I could move freely between them according to the needs. The only distinction of level of ESXi host is the power of horse and the I/O bandwidth (storage and networks VM will be used will be the same). It dawned on me that the distributed switch is configured with a particular number of uplinks. I'm trying to picture how this will work in this situation? I thought that I create a vSwitch distributed with 4 uplinks and finish by only using 2 of these uplinks when adding a small amount of work ESXi host to it. This is a valid configuration. Should I disable or do something special with the uplinks unused? I have not met this configuration so I wanted some tips on the correct configuration.
I have validated this configuration as described previously. A dVS with 4 uplinks can take care of the guests with "up to" 4 interfaces. Hosts with only 2 interfaces will have 2 of the 4 links rising dVS associated with natachasery while the other 2 will remain unused. In my case, I decided to use the uplink 1 and 2. Uplinks 3 and 4 are not used with these hosts.
-
Confusion about free version and the license.
I was under the impression that ESXi was offered free with certain usage restrictions, but I downloaded ESXi 4.0 installed on a USB key and starts a server with the USB port. After downloading the client application, he informed me that it was a 60-day trial version.
We are a SOFTWARE development and one of or customers wish
deploy our software on a hosted server VM ESX. For testing purposes I have
hope to launch a server ESXi and assess performance in
development of the product. As a bonus, I expect to use the virtual machines on the
Server as a test computers.
Can someone please clarify what the position with license compliance? Is the free version limited to ESXi 3.5, and exactly what are the limitations of the free version?
Concerning
Eugene Gill
You are welcome. If your questions have been answered please mark the thread as if.
-
Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade. The boxes are there (somewhere), and I can save the messages in them. I can just see them or call back messages on my macbook air. Structure of messaging and mailbox is intact on my iPad and iPhone, and all messages are recoverable. Any help to restore the messages on my Mac would be greatly appreciated.
The mailbox list is divided into categories with such topics on my Mac. When you position the cursor on one of these positions (with the exception of the mailboxes), you should see the Word display / hide it on the right. Please, click on show, if that's what you see.
In the category of the mailboxes, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small tip of arrow. If the arrow points to the right, click it so that it points downwards.
Also note that you may need to scroll the list of mailboxes upwards or downwards to see it all.
Maybe you are looking for
-
X 61 sierra Wireless HSDPA Modem &; Vodafone Mobile Connect compatibility MC8775
-
Problems with Internet... uses explorer 6
I get a blue page on my daughters (5 years) Dell XP after installing the high speed/wireless Verizon and Norton 360. After 5 to 10 minutes to connect to the internet I rec a blue page security risk could damage your computer. 0 x 00000050 (0xE7F67000
-
When to remove windows live it has messed up all my icons on win vista 32 bit computer
went to install/remove and attempted to delete windows live essentials and photo, because none will work on the windows vista 32-bit computer. This alters not and keeps saying wait until it unstalls. and screwed up my whole screen with weird colors.
-
How to install an i phone, cloud services say is not compatible with windows 7 64 bit
Just got an i phone, plugged into the laptop and windows recognized, downloaded tunes and cloud services, i ran the update and installed it on the correct phone but I optimizes freezes and cloud to say that windows is not compatible with windows 7 64
-
N200 - what part of replacement keyboard?
Hello- I need a replacement keyboard for my N200 0769 type and the parts department is unable to answer my question. When I search the keyboard part, I get the choice of a manufacturer "NMB" or "Chicony" for the keyboard. Is there a difference betwe