Smart Array P400 (upgrade of cache)

IM the raid card running with standard 256 MB cache module, but im having 2 512 Mo hiding laying around and you want to update the map with one.

and all hell breaks in bulk... the map gives the error "cannot start/start card.

When I put the 256 'original' back, he starts if nothing happened.

Ive even tried to start with a spare P400 in the 2 512, and we will also start very well.

am at a loss here,

the server now works for 4 years.

the server and the P400 have the latest firmware installed.

I run the following configuration:

HP DL185G5, so 12drive

  1. 2 x WD Raptor, 300 gb RAID1
  2. 1 x WD Green, 800 GB JBOD
  3. 3 x WD Green, 800 GB RAID5
  4. 3 x WD Green, 800 GB RAID5
  5. 3 x WD Green, 800 GB RAIID5

If you need more information, please let me know, and I provided

Hello denniswier,

Your question on your server it will be better answered by our sales department.

Here is a link to business forums.

Nice day.

Tags: Notebooks

Similar Questions

  • Smart Array p400 problem

    Hello

    I have a job entirely HP Smart Array P400/512 SAS controller (sata/sas pci-e x 8).

    The controller works well on some PCs, but I have problems with my setup:

    Core i7 920

    ATI HD 4870 1 GB

    Gigabyte ga - x 58 - ud5 (core i7, ich10R chipset)

    the bios can not find the card (the card does not start and it is not listed in the list of irq).

    I tried to update the p400 and tried all the version available, also contacted from bios gigabyte but they told me to contact hp support.

    I also tried to disable all options in the bios, remove all cards and use a PCI (pci 32 bit) but nothing has changed!

    I think that it's an irq with the ich10 conflict because I've tried in a Council ich9 and I have the same problem, I tried on an ati chipset and it works well!

    How can I solve this problem?
    How can I change the irq? (I can't change the irq of the motherboard)

    What use of the p400 IRQs?

    Thank you to all the world tryes to help me!

    FINALLY, THIS MARKET!

    Œuvres (beta bios) F8b well enough with the p400 (and speed up the loading of raid ich10 too), I'm very happy with the new bios.

  • HP Smart Array P400 and ESXi 5.1

    Hello

    That's probably a discussion for the hardware section but I don't have the permission to publish in there, so I'm posting here.

    I'll be back in 4 X HP Smart Array P400 complete with 512 MB battery Modules.

    Anyone know or have experience with one of these Smart boards and it'll work in a whitebox build? I think I'll have to update the firmware to 7.08, but she mentions that ESX 4, yet it will work? Or that I would be better off the coast through the RAID controller in a server VM window and run it like this? I don't have a motherboard capable of Intel VT - d again, however. Just curious.

    Thank you very much

    Karl

    According to http://www.vmware.com/go/hcl the P400 controller is supported with ESXi 5.1. What you need to keep in mind, is that there is always a problem with the drivers so that you're currently limited to logical volumes ~ 2 TB (see http://kb.vmware.com/kb/2006942 for more details)

    André

  • Smart Array P400

    Ive had the issue of "the upgrade/replcement" a table, preff without fair fallout RAID options.

    IM planning to replace these 800 on error SMART view with 1 TB of SeaGate.

    but I can do this without having to struggle a lot on the errors without messages ect ect.

    AND ive also the weird error in the '3rd' as the 5th disk raid array is dying, that's why im asking this.

    the player gives this error not frequently and only occasionally during the system startup, who now works for 4 years.

    the server and the P400 have the latest firmware installed.

    I run the following configuration:

    HP DL185G5, so 12drive

    1. 2 x WD Raptor, 300 gb RAID1
    2. 1 x WD Green, 800 GB JBOD
    3. 3 x WD Green, 800 GB RAID5
    4. 3 x WD Green, 800 GB RAID5
    5. 3 x WD Green, 800 GB RAIID5

    If you need more information, please let me know, and I provided

    Hello denniswier,

    Your question on your server it will be better answered by our sales department.

    Here is a link to business forums.

    Nice day.

  • Smart Array controller, required for VMware vSphere Hypervisor

    I currently use VMware Server on Windows 7 for my test enviromnent.  I would like to set up a server using the VMware vSphere Hypervisor.  The server is an HP Proliant ML110 G7.  The server has 4 GB of memory, single core processor quad intel (E3-1240), Intel 82574 Gigabit NIC , and an integrated HP Smart Array B110i SATA RAID Controller.  This Smart Array B110i controller will work with the latest version of the hypervisor?  Version 4.1 documentation controller HP Smart Array under ESXi hardware required but then lists it list a Smart Array P400/256 controller under installation on supported and start of storage systems.

    As far as I can see the server itself, the Integrated NIC (NC112i) or the RAID controller are supported with ESXi (not even on older versions). I really recommend you take a look at the VMware HCL (http://www.vmware.com/resources/compatibility/search.php) or matrix of Support from HP (http://h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html)

    Regarding RAID controllers. Make sure that the controller is equipped with at least 512 MB BBWC/FBWC for a good disk performance. Addition of write cache, makes a HUGE difference.

    André

  • HPE Smart Array P440ar: hp smart array p440ar / 2 gb windows 2003 fbwc

    Hello!

    (Hp smart array p440ar / 2 gb fbwc) will work on windows 2003 (32-bit)?

    Hello:

    You can also ask your question on the EBC - Proliant servers HP Support Forum

    https://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.V9fxKeT6u9I

  • Re Looking for HP Smart Array P410 profile low media

    Hello

    I recently bought 2 HP Smart Array P410 flea market cards unfortunately profile low media are not come with them which I think is the case when buying nine.

    I had trouble finding that just grateful if someone could point me in the right direction.

    Thank you

    Donald

    Hello

    HP is not in stock profile low support for this particular card.

    This metal low profileoffered on eBay can work.  A measure on your existing maps and see if it fits.  There are other media of your choice, but I would lean towards those with perforated air holes.

    Look over your RAID cards.  Are they manufactured by Adaptec for HP?  If Yes, then maybe Adaptec has the part.

  • HP Smart Array 642: driver HP Smart Array 642 for Windows 2008 R2

    Nice day

    I am trying to install drivers for HP Smart Array 642 controller. I have installed Win2008r2. I tried the drivers for Win2008x64-> I get BSoD every time when I try to apply the driver.

    Non-miniport driver for Win2008r2 does not work.

    Firmware is 1.14. But there's no FW for Win2008r2. The FW for Win2008x64 does not say that OS is not correct.

    Where are a real driver for Win2008r2?

    Hello:

    You can also ask your question on the Forum of Support Community Business Enterprise HP - section Server Proliant where it seems that most of the posts are listed about the Smart Array devices.

    http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VfQu5GaFO9I

  • HP Smart Array P822/P840 does support VAAI?

    HP Smart Array P822/P840 does support VAAI?

    Controller RAID P822 is considered to be an I/O device and therefore would not be candidate to support VAAI.

    For more information, feel free to review the VMware Compatibility Guide: search system

  • ML370 with Smart Array 532 - equip ML350 with disks - will I lose my config / run?

    We have an ML370 with a

    and the motherboard has failed.

    I want to put the disks and the controller of table in a ML350, but want to know if it will lose its configuration or is it boot/run with these mobile?

    Please help - urgent

    Mark

    It will depend on where the tables in table are kept with the card.  Be sure and back up all your data.

    This map requires an older system motherboard for it to work.

  • ESXi 5.1 HP Smart Array Controller P420i alarm

    Hello

    One of our hosts in VSphere Client VM shows an alarm in the condition of the equipment for the HP Smart Array P420i controller. I noticed that it was noted that this may be a false alarm and that's may be headed down to a problem of firmware version, but every example of which was accompanied by a screenshot of the error with the message firmware in the details. I don't have that or even nothing else in the details. This is the case, however, for control of the ILO for the host that he advises the controller is OK. I get a screenshot of the error below. Does anyone else have this problem?

    Thank you very much

    HP Smart Array P420i Controller.jpg

    This is a know bug and HP has an advisory page on this subject. for detailed information, you can see link below

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=5295168&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c03737176-1%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • HP Smart Array P410i - logical drive not visible in 'add a storage '.

    I'm running a server small laboratory with the following configuration:

    DL 360 g7

    Storage controller "Smart Array P410i" with 512 MB BBWC

    6 x SAS 600 GB of disk

    ESXi hypervisor 4.1 - U1 (currently configured directly from the customer)

    Problem:

    1. If I configure the Raid 10 logical unit, everything works fine. A datatore about 1.7 TB can be used.

    2. If I have configure Raid 5 or Raid 0 or Raid 50 then I see the drive in the config and start-up (1 logical drive configured...) tool, but in the storage option Add, there is no disk/lun to select.

    I refreshed everything etc, but only if I use the option usable raid 10 storage "appears.

    Any advice/help welcome.

    Make sure your logical drive is less than 2 TB. VMFS limitation is specifically 2 TB-512bytes.

  • DL120 G6 Proliant Smart Array RAID with ESXi (free)

    Hello

    We have ESXi running on a DL120 G6 with 8 GB of RAM, installed via the website of VMWare Go.

    The server has 4 disks configured in the BIOS of the server for RAID 1 (2 and 2 mirrors).

    How can I tell the server to use the RAID configuration as at the moment we seem to use only a single disc of 4.  Currently, I am able to add one of the spare disks 3 as independent data stores.

    Is there a BIOS setting that I need to configure to enable ESXi to use RAID?

    Thank you

    Daren

    The default RAID controller DL120 G6 is a Smart Array B110i, who is not a hardware RAID controller supported (see http://www.vmware.com/go/hcl for the supported RAID controllers) you will be able to use this controller with ESXi RAID functionality.

    André

  • No State of health for the Smart Array P400i controller

    Hello

    I installed VMware ESXi 3.5 U3 with HP Management Agents on my HP Proliant DL360 G5 server with a Smart Array P400i controller.

    When I look at the State of health of my material in the VMware Infrastructure Client, I can't control my storage controller.

    The Smart Array P400i controller is compatible (checked with VMWare HCL) with ESXi 3.5 U3.

    So why can I not follow it?

    Thanks in advance,

    Kristof

    The implementation of ESX ICD (health) does not support HP Smart Array controllers. You can't, so not able to monitor volumes P400i RAID controller to health of ESX.

  • Upgrade of cache A6000

    I have a pavilion A6000 and yes it's old but its running very well, but it has 512 MB of cache, speed: PC2-4200 MB/s and upgrade suggestions other than to get a new table.  need to know what to buy.  I have 4 GB of memory and a 32-bit to work with.

    taegutom wrote:

    Thanks for your reply, but I wonder about cache not only upgrade memory, the cache is on my processor

    Hello

    The on-chip cache is NOT extensible, it is a sealed unit.

    Kind regards.

Maybe you are looking for

  • Tecra A11-125 - technical specification on the integrated chip

    Hello Where can I find more info for the Tecra A11-125? Specifically, I need to know the SATA standard for the chip: is Sata150 and Sata300? Thank you Oliver

  • MacBook Pro do not start

    I was working on my computer yesterday as usual and suddenly a blue screen appeared and my computer did not move from there. I rebooted and now it does not start up. I have tried rebooting several times an apple logo appears on the screen and the loa

  • Where is the Options window in Firefox 4?

    Help tells me about "the options available in the Advanced Options window Panel"-, but how do the Options window in the first place? (The only Options on the Firefox tab at the top left are to do with Add-ons).

  • Add mSATA to Y580

    I had a problem adding mSATA my Y580. I've successfully added in the system, but I can not boot up to windows. The thing can be seen in the BIOS, and I put my HARD drive to be the 1st boot. Now, once that windows is about to load I've always had a bl

  • first song of media player

    I have media player 11. She arranges my albums and songs after moving from the first song of each album in the album and it relists as an unknown artist. My albums are on a mobile hard drive.