HP Smart Array P822/P840 does support VAAI?
HP Smart Array P822/P840 does support VAAI?
Controller RAID P822 is considered to be an I/O device and therefore would not be candidate to support VAAI.
For more information, feel free to review the VMware Compatibility Guide: search system
Tags: VMware
Similar Questions
-
HP Smart Array 642: driver HP Smart Array 642 for Windows 2008 R2
Nice day
I am trying to install drivers for HP Smart Array 642 controller. I have installed Win2008r2. I tried the drivers for Win2008x64-> I get BSoD every time when I try to apply the driver.
Non-miniport driver for Win2008r2 does not work.
Firmware is 1.14. But there's no FW for Win2008r2. The FW for Win2008x64 does not say that OS is not correct.
Where are a real driver for Win2008r2?
Hello:
You can also ask your question on the Forum of Support Community Business Enterprise HP - section Server Proliant where it seems that most of the posts are listed about the Smart Array devices.
http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VfQu5GaFO9I
-
Hello
I have a job entirely HP Smart Array P400/512 SAS controller (sata/sas pci-e x 8).
The controller works well on some PCs, but I have problems with my setup:
Core i7 920
ATI HD 4870 1 GB
Gigabyte ga - x 58 - ud5 (core i7, ich10R chipset)
the bios can not find the card (the card does not start and it is not listed in the list of irq).
I tried to update the p400 and tried all the version available, also contacted from bios gigabyte but they told me to contact hp support.
I also tried to disable all options in the bios, remove all cards and use a PCI (pci 32 bit) but nothing has changed!
I think that it's an irq with the ich10 conflict because I've tried in a Council ich9 and I have the same problem, I tried on an ati chipset and it works well!
How can I solve this problem?
How can I change the irq? (I can't change the irq of the motherboard)What use of the p400 IRQs?
Thank you to all the world tryes to help me!
FINALLY, THIS MARKET!
Œuvres (beta bios) F8b well enough with the p400 (and speed up the loading of raid ich10 too), I'm very happy with the new bios.
-
esx host does support RAID ATA?
hardware requirements host ESX said, "RAID adapters supported are HP Smart Array, Dell's Perc and IBM ServeRAID controllers"
Does include ATA RAID? If it supports RAID ATA, I use 2 disks or more to in my local machine to an ATA RAID supported by esx host storage. It work?
Thank you.
It does not support ATA controllers I know.
Dave
VMware communities user moderator
New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.
You have a system or a PCI with VMDirectPath? Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.
-
No State of health for the Smart Array P400i controller
Hello
I installed VMware ESXi 3.5 U3 with HP Management Agents on my HP Proliant DL360 G5 server with a Smart Array P400i controller.
When I look at the State of health of my material in the VMware Infrastructure Client, I can't control my storage controller.
The Smart Array P400i controller is compatible (checked with VMWare HCL) with ESXi 3.5 U3.
So why can I not follow it?
Thanks in advance,
Kristof
The implementation of ESX ICD (health) does not support HP Smart Array controllers. You can't, so not able to monitor volumes P400i RAID controller to health of ESX.
-
HPE Smart Array P440ar: hp smart array p440ar / 2 gb windows 2003 fbwc
Hello!
(Hp smart array p440ar / 2 gb fbwc) will work on windows 2003 (32-bit)?
Hello:
You can also ask your question on the EBC - Proliant servers HP Support Forum
https://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.V9fxKeT6u9I
-
Re Looking for HP Smart Array P410 profile low media
Hello
I recently bought 2 HP Smart Array P410 flea market cards unfortunately profile low media are not come with them which I think is the case when buying nine.
I had trouble finding that just grateful if someone could point me in the right direction.
Thank you
Donald
Hello
HP is not in stock profile low support for this particular card.
This metal low profileoffered on eBay can work. A measure on your existing maps and see if it fits. There are other media of your choice, but I would lean towards those with perforated air holes.
Look over your RAID cards. Are they manufactured by Adaptec for HP? If Yes, then maybe Adaptec has the part.
-
ESXi 5.1 HP Smart Array Controller P420i alarm
Hello
One of our hosts in VSphere Client VM shows an alarm in the condition of the equipment for the HP Smart Array P420i controller. I noticed that it was noted that this may be a false alarm and that's may be headed down to a problem of firmware version, but every example of which was accompanied by a screenshot of the error with the message firmware in the details. I don't have that or even nothing else in the details. This is the case, however, for control of the ILO for the host that he advises the controller is OK. I get a screenshot of the error below. Does anyone else have this problem?
Thank you very much
This is a know bug and HP has an advisory page on this subject. for detailed information, you can see link below
-
HP Smart Array P400 and ESXi 5.1
Hello
That's probably a discussion for the hardware section but I don't have the permission to publish in there, so I'm posting here.
I'll be back in 4 X HP Smart Array P400 complete with 512 MB battery Modules.
Anyone know or have experience with one of these Smart boards and it'll work in a whitebox build? I think I'll have to update the firmware to 7.08, but she mentions that ESX 4, yet it will work? Or that I would be better off the coast through the RAID controller in a server VM window and run it like this? I don't have a motherboard capable of Intel VT - d again, however. Just curious.
Thank you very much
Karl
According to http://www.vmware.com/go/hcl the P400 controller is supported with ESXi 5.1. What you need to keep in mind, is that there is always a problem with the drivers so that you're currently limited to logical volumes ~ 2 TB (see http://kb.vmware.com/kb/2006942 for more details)
André
-
Smart Array controller, required for VMware vSphere Hypervisor
I currently use VMware Server on Windows 7 for my test enviromnent. I would like to set up a server using the VMware vSphere Hypervisor. The server is an HP Proliant ML110 G7. The server has 4 GB of memory, single core processor quad intel (E3-1240), Intel 82574 Gigabit NIC , and an integrated HP Smart Array B110i SATA RAID Controller. This Smart Array B110i controller will work with the latest version of the hypervisor? Version 4.1 documentation controller HP Smart Array under ESXi hardware required but then lists it list a Smart Array P400/256 controller under installation on supported and start of storage systems.
As far as I can see the server itself, the Integrated NIC (NC112i) or the RAID controller are supported with ESXi (not even on older versions). I really recommend you take a look at the VMware HCL (http://www.vmware.com/resources/compatibility/search.php) or matrix of Support from HP (http://h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html)
Regarding RAID controllers. Make sure that the controller is equipped with at least 512 MB BBWC/FBWC for a good disk performance. Addition of write cache, makes a HUGE difference.
André
-
DL120 G6 Proliant Smart Array RAID with ESXi (free)
Hello
We have ESXi running on a DL120 G6 with 8 GB of RAM, installed via the website of VMWare Go.
The server has 4 disks configured in the BIOS of the server for RAID 1 (2 and 2 mirrors).
How can I tell the server to use the RAID configuration as at the moment we seem to use only a single disc of 4. Currently, I am able to add one of the spare disks 3 as independent data stores.
Is there a BIOS setting that I need to configure to enable ESXi to use RAID?
Thank you
Daren
The default RAID controller DL120 G6 is a Smart Array B110i, who is not a hardware RAID controller supported (see http://www.vmware.com/go/hcl for the supported RAID controllers) you will be able to use this controller with ESXi RAID functionality.
André
-
Apple does support HDMI 2.0 on any MacBook Pro?
I would use my monitor Dell 4 k with my MacBook Pro retina end 2013. This laptop does support HDMI 2.0? I would like to use HDMI at 60 Hz.
Thank you.
In itself, it supports HDMI 2.0! But apparently some did work with a Thunderbolt/Mini DP adapter HDMI 2.0: CDM HDMI 2.0 cards
-
Chrome still does support OSX 10.9.5
Chrome still does support OSX 10.9.5?
According to the page of the Google Chrome browser, this version of Chrome is said
in support of Mac OS X to present 10.11.5 10.9.5. Chrome - the Google browser
However, the questions and problems that Chrome continues to show Mac users,
indicate that it is not a wise choice for Macs. Users have found Chrome to be
a resource eater, which affects the performance of OS X.
We'll find a better browser to Mozilla Firefox; also Safari is always supported by
Apple at the moment (my OS X 10.9.5 a recent version of Safari; I prefer Firefox.)
• How to download and install Firefox on Mac - using Mozilla Firefox:
https://support.Mozilla.org/en-us/KB/how-download-and-install-Firefox-Mac
Browser like SeaMonkey (Mozilla) has also a customer of e-mail with browser for 10.9.5.
http://www.SeaMonkey-project.org/
A few others are probably OK, that won't cost you performance elsewhere.
Good luck & happy computing!
-
HP J6450 really does support WPA Wireless encryption?
I just bought a new J6450 yesterday, and when I tried to install it as a wireless network my SSID does not appear (even if the PC just next to the printer is connected to my network). Even when you enter the SSID manually the installation process does not recognize it. There are other SSID in the region that appear during the installation. I confirmed that my router is broadcasting and the printer was 4 feet from the router, so I know that is not due to the intensity of the signal.
Details of router - NetGear WPN824v3, configured for either 802. 11B or 802.11 g (auto mode), WPA encryption
The only thing I noticed during my research it tonight is the SSID that was listed when installing 2 are encrypted and most of the HP support info and documentation related to the wireless configuration seems to refer essentially to WEP. If the HP J6450 really does support the WPA encryption, and if so, does anyone have ideas for troubleshooting why it does not recognize my router?
Thank you.
Connection to the router under the admin user, then "Wireless settings" page is a Mode setting and the default value is "Auto 108 Mbps. Using the arrow in the drop-down menu, change to "b and g" then set the channel to 'Auto' and save the configuration changes. -
Satellite M60-135 does support C - salt?
Hello
TEAC DVD player no longer works.
So I would like to replace it.
Think I fell on the drive Pioneer DVR-K16L of alternatives.But it is obviously set to "cable select".
My M60-135 does support this, or do I have to choose another drive?Any suggestions welcome!
THX!
Hello
These information are not known to me, and especially if you want to buy a car for you laptop, you must first call the Toshiba authorized service provider for more information on compatible players.
There is also another possibility to find out what the laptop supports parameters.
I use Nero burning rom and this application supports a diagnosis function. He entered the information about the installed CD/DVD drive.
After this diagnostic procedure, you need to know more details about the installed drive and you must buy the player that supports the same specifications
Maybe you are looking for
-
What are the specifications of the Satellite Pro A10
OK this question isn't quite as noob as it sounds, well not quite...The question is, I look at a Satellite Pro A10 for a friend, and he seems to have no Modem connection or wireless, despite the modem plug and the switch at the front for the wireless
-
I'm trying to select several images (Forms), but I have not found a selection tool. This selection tool to transform the mouse cursor in an arrow and it is possible to select several images or figures. I use Microsoft Excel for Mac 2011 Version 14.5.
-
Reinstall the applications pre-loaded with Windows 7 64 bit upgrade
I'm looking to upgrade my 32 bit to 64 bit on my HP Pavilion a6710t (which came with Vista 32-bit) OS. Because I'm changing from 32 bit to 64 bit I do a 'Custom' instead of 'Upgrade' installation installation so I I will lose programs installed, incl
-
Menu REF ignore the first underscore character
There are characters that are not valid in a custom ItemName LabVIEW? If you create an ItemName like 'One_Two_Three' in a file of numbers, or even at the top level, it appears wrong. Name of goods: One_Two_Three Displayed as: OneTwo_Three It seems th
-
Photo creations closes when I try to choose a theme/template for a project.
Suddenly Photo Crations abruptly closes when I click on a theme for a creation. I've used this program in the past with no problems. I tried to uninstall, download the latest version and reinstall anything will do. Any suggestions? I use a laptop fro