Smart objects - copy without referencing the Original SO?

Similar Questions

• How to duplicate a smart object and then modify it, without affecting the original?

  I have an element of vector illustrator that I am placed in a t-shirt mockup in photoshop. I have the provision essentially how I want, but I'm trying different color variations. I think that simply duplicate the initial placement and then change the color of the copy resulting, but this affects both the copy and the original. I looked into it a little further and found that I should try the option "replace contents" under smart objects, and that it would change the copy. Then I go back to illustrator, made a copy of the original vector and then the color change I had in mind and then saved as a separate document that I could use then by replacing the contents of the copy. However, still affects two smart objects!

  I tried this like linked smart objects and smart objects shipped without success.

  In the end, I just want to maintain the position of the original layer with the layer duplicated and edited. If you know a better way, please share!

  Layer > Smart Object > new Smart Object by copy. It forks a new, independent so (cut and paste or duplicate maintains the link between them).

  When you double-click the SO thumbnails in the layers panel, it opens the SO in the main application, in this case to have.

  Do Save your changes (not save money, unless you want to distribute the SO in a separate file, normal).

• What is the 'best' way to copy a useful project again, so it can be changed without affecting the original?

  I'm pretty much a newbie to LavVIEW.

  I use LabVIEW complete edition on Windows 7 2012.  I copied a project using Save As duplicate in the Project Explorer.  He created an excessively long and complex directory structure.  He made "too long" (probably from the path being too long).

  The intention was to obtain a copy of the project can be used to freely modify it without damaging the original.

  I searched the Forum and knowledge base, do not see anything definitive.  I guess that information is already posted, but just, I have not been able to find.  A point in the right direction would be appreciated.

  Thank you

  Mark

  Copy the directory of the whole project to a new location

  Delete the files .lvlps, .lvprog and the new .aliases copy

  Start LabView and create a new empty project

  In the project manager, add a new auto fill directory select the new copy of the project directory

  Save the new project in the new project directory

  Only caveat is that this does not all dependencies in your user.lib or inst.lib for the first time, you open a vi that you might find some of the dependencies that are not in the default locations.

• No linked smart objects are loaded in the RAM of the Scratch disk or storage?

  Building a computer and I need to know where to invest.

  If a graphic artist made use of the dynamic in a file objects, and then when they "open" one of these smart objects, will be that load into memory (assuming that it has enough memory allocated), the disk scratch or - given that the dynamic object is 'stored' in the original file - the file work constantly read and writing directly from the drive the main file is saved to?

  I'm certainly not an expert but I understand that Photoshop has always the image in RAM to be able to work on it. (SO or something else)  If this RAM is not enough then Photoshop uses the drive working to "expand" the RAM. But even if it is enough will always be used the drive working. That's why most people use SSDS for zero and regular hard drives for storage.

  Remember that Photoshop is not the only one who is eating your memory. The operating system and a myriad of other programs and background processes all want their share...

• Work on keyframes in copied sequence change the original sequence as well (first Pro CS5.5)

  Hello world

  Maybe it's a very basic question, but looking on the forum did not bring to the top of the related issues, so I'm going:

  Let's say I have copy a sequence in first Pro CS5.5 and paste it into the same project. I have a few textclips with keyframes in them. (I do, because the videos remain the same, I just write different things in them.) When I change the keyframes in the copied sequence, the way that I need them out there and then come back to the original clip, keyframes it changed as well. This isn't what I wanted.

  So my question is: How can I make a copy of a sequence and then work on it without changing the original at the same time? Why are they related in any way? What's a selection in my version of Premiere Pro or is it a general thing?

  Be great if someone could explain it to me.

  Thank you!

  When you open your title for editing, press the new title based on the current title in the title Editor button; It's one that looks like the film with the "T" in it. This will create a new title in the sandbox, but will not replace the current instance of the title. However, you can simply drag this copied to the instance title, hold the Opt/Alt key and drop it onto the animation instance, copied. This will replace the contents of the clip, but preserve the animation.

• the files can be copied without overwriting the existing files?

  I want to copy music files from an external hard drive to my laptop without any duplicates. files can be copied without overwriting the existing files?

  I want to copy music files from an external hard drive to my laptop without any duplicates. files can be copied without overwriting the existing files?

  Yes, you can.

  You can either use the simple method of drag - move or the right click move optionfrom context menu.

  Method of drag - move will have a copy of the music even external drive and one copy in your personal folder.
  Move To method will be "moving" the music file from the drive of the post to your personal folder. No duplicate.

  If you do not have CopyTo and Move To options in your right click context menu, use this tutorial:

  http://www.Vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.html

  Use a method... that's easier.

• Copy the pictures, and then change those copied without affecting the others

  I'm trying to copy frames and change those copied without affecting the others.
  
  For example copy frame1 in box 2. When I change the frame 1/2, they change and I wan't to do not change after you copy on frame 2. Thing is that I have around 10pics on a chassis, converted film of symbol. When comes to this symbol, the images are on the same frame, but can be changed individually
  
  Pls help ASAP... I need to do emergency

  "CipiClaudiu" wrote in message
  News:f68r5n$OAG$1@forums. Macromedia.com...
  > I'm trying to copy images and edit those copied without affecting
  > the
  > other.
  >
  > E.g. copy frame1 in box 2. When I change the frame 1/2, they
  > time
  > change and I wan't to do not change after you copy on frame 2. Thing
  > is I
  > have around 10pics on a chassis, converted film of symbol. When coming
  > who
  > symbol, images are on the same frame, but can be changed individually
  >
  > Pls help ASAP... I need to do emergency

  It looks like you copied a symbol from one image to another, then
  "gone in ' and edited this symbol... what you need to do is create a copy
  the symbol and change this one instead... IOW...

  step 1:
  'symbol1_mc' in the library is duplicated to create 'symbol2_mc '...

  Step 2:
  you copy your picture 1 on frame 2 of the timeline just as you did

  Step 3:
  Use the properties panel to switch on stage (and the second image)
  "symbol1_mc" with "symbol2_mc"... so that you now have 'symbol1_mc '.
  frame 1 and 'symbol2_mc' on frame 2

  Step 4:
  then edit "symbol2_mc".

• How to delete a picture library "referenced" without deleting the original photos in the application which is used to compensate for my projects?

  I made the mistake of setting up Apple Photos on my Mac Pro using the library option "referenced" (which is where my computer file are not copied in the Photos). However, throughout the year, I started to do the 'projects' in pictures by which I copied some files of original photos in the Photos app. My library is now made up of a mixture of many referenced files and some originals copied into the app.

  Now I did some heavy reorganization and clean up the photos in my computer folder, but obviously none of these changes can be found in the photos referenced in the Photo app.

  My goal now is to started using iCloud Photos but I want to do with a clean slate (i.e. without using one of the current referenced library that I have pictures).

  I have two questions:

  (1) is there a way to Photos to delete ONLY the pictures that are files referenced and not the originals that are copied into the app?

  (2) if the above is not possible, then what happens to my projects if I simply delete all the photos I have in the app? I'll always be able to see the photos of the calendar, that I did for example?

  I'm afraid that if I delete my entire library I will not be able to access my projects more in the future. Does anyone have any suggestions on how I can manage this?

  Thank you very much.

  A

  You can consolidate all of the photos that are referenced. If you have used photos referenced in the projects (calendars, books), select the photo in your photo library and use the command "file > consolidate."  This will copy the original referenced in your photo library.

  

  To find all the files referenced requiring consolidation of create a smart album:

  File > new Smart Album

  Set the constraint for the album 'Photo is referenced.

  Now you have all the photo referenced in an album. You can select the photos in this album and either use ' file > consolidate "to copy in the library or press the ⌘⌫ key combination to delete the picture from the library.

  Before you consolidate or remove a photo referenced, using ' file > reveal in Finder ' to view the original file.  This way you can remove the copy on your disk after you have removed the photo from your photo library.  If the referenced file is left behind, pictures will not remove.

  If you want to use your photo library with iCloud photo library, it is essential to consolidate the pictures referenced, because referenced photos cannot download on iCloud photo library.

• A copied XPJ crashed the Original XPJ

  What I use:

  • Windows 7
  • 7 HR

  Problem:

  I got a job XPJ in a folder, I was original XPJ files and make a copy of it to apply a new CSS while keeping the original as a return to the top. The copied version is in the SAME folder as the original XPJ as not to spoil anything. I did this for multiple files without problem. I copied my last one and HR crashed after the copy. Now the XPJ original will open (you can see all the files everything) just to have Robohelp crashes shortly after, before you start working on it!

  I get the typicall that RoboHelp 7 has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. But there is no solution.

  I just hope that my fear became reality that I lost the orignal work!

  How can I fix the XPJ no longer planting robohelp?

  * I found an OLD OLD to the top of this project and I have nocticed is my current copy has an .ldb file (it looks like a Microsoft Access), while the old BACKUP does not have this file. This could be the reason why he used completely open?

  First RoboHelp 7 is not supported on Windows 7 and may very well have problems.

  I don't understand how you came to this situation. Why you copy the XPJ project file in the same folder or in fact why copy at all? Also, what is that has to do with changing the CSS?

  The LDB file is created when you open a project that the PCD file is a Microsoft Access database with a special extension. The LDB file is created when you open an Access database and should be deleted when it is closed. He night cancelled if left step. If the project is closed you can remove.

  Now how do get out you of this. Looks like your way of working with the XPJ is the first cause, then you will have to try to open the project with the HHP file after deleting the CPD and XPJ file. You will lose a few things, but see the projects on my site for the methods to recover.

  We know why you work this way, so that maybe we can find a better solution.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Indexing an extra disk without losing the original drive

  In collaboration with Vista Ultimate installed on a C 400 MB drive.  I am writing to inquire about the additional E-Reader installed months after that the computer was built.  Can an introduct "Indexing" on drive E without losing the indexing of the C drive.  The documentation says nothing about it and do such a change could cause permanent damage.

  In addition, the reliability and performance diagnostic feature shows you that memory is a problem.  It is a 2.4 Ghz machine withan processor intel cord quad, 4 GB memory and a relatively new motherboard.  The overview of resources shows a 'yellow' light for the performance of the memory and the use shows 71% and 808 MB of available memory.  I see no particular indication on how to address this issue.  Requested orientation.

  Hello

  Add a second hard drive to Windows Vista search index
  http://www.online-tech-tips.com/Windows-Vista/add-a-second-hard-drive-to-Windows-Vista-search-index/

  ----------------------------------

  Are your running SP1 or SP2?

  Check the reliability and performance - memory to see what is using the memory - also in Manager tasks
  -Process tab - column processor.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Replace the smart object to images of the bridge

  Hello! I know it can be a bit complicated, I created an action to replace the "Smart object" layers for images selected from Adobe Bridge, replaces only always the same images... There is the possibility to get this done via a script with at least 5 images?

  In this way:

  http://zip.NET/bhsYDX

  http://zip.NET/bnsYvV

  tokuredit wrote:

  And what would this escipt?

  ????

• How can I place several smaller images of varying size on one page for printing without losing the original size.  Board contact option to resize my pictures

  Does anyone know how to place several small pictures on a single page, so I can print them out as a rather print over and over again.  I want to maintain the original size of the images that vary somewhat.  I tried to use the option of the Board-contact, but he seems to want to resize my images which unfortunately is of no use to me.  I tried to cut and paste on a new page, but I don't think that it is now the original size.

  Alternative applications sometimes can provide quick and easy results.

  It might be interesting to download the demo version of Photoline: it includes a simple Board-contact option that allows for images to be included without loss of resolution, i.e. the original is left intact and the proportions remain unchanged. Since Photoline also supports documents several pages, all the thumbnails are collected into rows and columns, the user can control and the end result can be exported as PDF.

  -Download the trial of pl32.com

  -Open Photoline, then open the browser (CTRL/CMD (B)

  -Navigate to your folder with the images you want to combine for printing.

  -right mouse click in the thumbnail view, and then select "Create image Catalog.

  -Select the page by Page size

  -under 'Size' define the number of rows and columns (there are here a translation error: "Spalten (COL) / rows (lines)".)

  -Uncheck "scale photos physically." This ensures that the original images are intact and incorporated in full resolution.

  And then click OK.

  Some of the other testing devices until you get a satisfactory result. Then export it to PDF.

• How to cut a path in a grid without losing the original attributes?

  Whenever I shared a square/rectangle in a grid, the object seems to come out more and loses the original angle of direction, opacity and original size.  However, it keeps its proportions and the base color.  How do I do this action while maintaining all the attributes?

  Thank you

  This option is not available.

  The command 'Split in grid' (apparently) uses the framework encompassing as reference to create the object 'cut' (check the screenshot).

  Perhaps you can suggest as a future request here https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  

• How to avoid the transparent background, white in smart object (psb) conversion when the image track high fidelity that we have the ability to ignore track of white up to 16 colors.

  I have an image psd file in photoshop cc 2014 the layer background transparent. I wanted to convert to vector. The best option I've seen was converted first to a smart object in photoshop by layer-> Smart objects-> convert to smart object. then he exported a CPS. Then I opened the file in illustrator and applied image tracking tool, but the background transparent got converted to white but I had the option to skip white up to 16 trace of color. But in the case of Conversion of high fidelity, the option do not know white is not available, what do I do now?

  After using the Trace of the Image and expand the result, just find a part that is filled with white and use Select > same > fill and just delete.

• Copy a symbol, the original same-name symbol

  Hello

  If I copy a symbol, the new symbol for the same symbol name (to see the left in the probperties). Example "symbol_one"-> copy and paste-> new symbol-> "symbol_one".
  If I want to change only one of these two, it is not really possible. Or I want to call one of them under the name of symbol for interaction, same "namespaces".

  Concerning
  Alex

  I don't know what you mean because you can't on the stage of several instances of a symbol with the same name. The original name will remain the same, but the bodies have different name and you can call them by their given name.