Smart objects Photoshop CC open in Illustrator CS6 instead of Illustrator CC

Similar Questions

• Smarth photoshop object does not open in illustrator for editing.

  Hello, I have a problem when using photoshop. I always use photoshop and illustrator in the same work, there are files written in the online adobe illustrator (graphics) library. When I go into Photoshop and then load the library file in the document normally use as a smart object. But a week ago I could double-click smart objects and open the Illustrator to edit it, even the smart object is already in the document. For example: I gave two clicks, it opened in Illustrator, I have edited and he edit in photoshop. Only, it is more the fact, to give - click on the smart object does not open in illustrator and a message saying "cannot be displayed in photoshop." How can I make him recognize the file in "AI." and open again directly in illustrator?

  This happens because you try to change the file that is located in the cloud. You must open this file in AI of the Cloud in order to change it. You can also try the alt/opt down key now when you try to open the SO.

• Seit ich auf CC 2015 updated habe, kann ich in Photoshop Smart objects mehr öffnen, die von Illustrator importiert wurden keine.

  Hallo,

  seit ich auf CC 2015 updated habe, kann ich in Photoshop vector objects Smart mehr öffnen, die von Illustrator importiert wurden keine.

  ES scheint, als würde try Photoshop, Illustrator 2014 zu öffnen, obwohl now 2015 installed wurde. There are one possibility, das Zielprogramm neu zu compete?

  Beste Grüße,

  Tommi

  Habe eine Lösung found.

  1. in Illustrator eine Datei speichern und create x-adhesive.

  2 rights Maust auf Datei und die Standardanwendung fur das Dateiformat *.ai neu compete sharp.

  3 Auf Illustrator CC 2015 sites

  Fertig

• Dynamic objects open in Illustrator CC instead of 2014 CC

  I designed a few elements in Illustrator CC 2014 and paste as a smart object in Photoshop CC 2014. Yesterday I made a few changes to these files to smart objects, and everything worked well, the smart object open in Illustrator CC 2014. Today, another story, I open smart objects and they opened in illustrator CC no CC, 2014 version where they were created. There someone have an idea of what's going on? I'd appreciate any contributions to this number. I found a similar issue, but the solution was not helpful, because my smart objects are associated with the last version not in an earlier version, as the proposed display was the problem.

  Rosy

  Photoshop asks the operating system to open the file with the program associate for .ai files.

  Somehow your BONES think it should open in CC instead of 2014 CC.

• Smart object layer launches cc photoshop illustrator 2915

  in previous versions, I could double-click a smart object layer to open it in illustrator. Now, I get an error message:

  could not change the smart original smart object because the application that created the dynamic object cannot be started.

  This is the message appears if it is flax or incorporated.

  Hi Jay,.

  Please visit the following link: this element is not directly editable in Photoshop...

  Kind regards

  Tanuj

• Linked smart objects nested within the smart object, not automatically update

  I notice that if I have a smart object bound or smart, group with other layers in a new smart object feature updates of content updated the stops working and has to be done manually.

  This would be the creation of a mobile application by saying where I need the same key throughout all my 10 files.

  Say I have a button throughout several documents and would like to be able to easily change the color in all documents. I'd create an object bound and intelligent color sample. Then in my paper, I put this object linked above my shape of button and create a clipping mask. Then create a dynamic object out of these 2 layers.  I place this same button in all my documents. In my mind, I would always open the object bound and smart (color chart), change the color and it should be updated for the buttons in all of my open documents.

  This is not updated in the document all. Need to go in the dynamic button object and update updated content.

  Using Photoshop | Working with dynamic objects

  The link above

  Note:

  While the detection of changes to the linked smart objects or update a linked Smart object, Photoshop examines the immediate linked file. Links embedded within dynamic objects are not updated.

• RE: Camera Raw and smart objects

  Hello everyone.

  I have a question please.

  Inside of the 8.1 camera raw workflow options, I checked the box to open in Photoshop as smart objects.

  I noticed inside the Camera Raw, open the Image box to turn to, the open object box.  I clicked open, and he opened the Image as objects inside Photoshop the Smart.

  If I make changes to the Image, and if I Double click on the smart object, it will open in Camera Raw again which is good.

  I also noticed that if I make changes to the Image inside the Raw to the dynamic object camera after clicking Open Smart Objects I see the changes inside the Photoshop too.

  But if I make the changes to the Image inside the Photoshop, and later I Double click on the Image, the Image opens inside the Camera Raw, without modification.

  Here's my question: still The Smart object Image is a Raw Image?

  My next question is:

  I don't know if I open a Raw Image Inside the Camera Raw and if I click on fact, the image is always a Raw Image, which is good, and if I click on Reset low, will reset back. If I change only the White Balance and click on go back the Camera Raw and I chose as shot, the Image goes back to the Original Raw file.

  But if I do other changes such as exposure, any color change and click on I did can never return to the original...

  Last month I was in collaboration with the Lightroom and I noticed if I open a raw image inside the Lightroom and modifications to make the Image, any time I can click on reset and the Raw image dates back to its origin.

  I don't think that we can do this with Camera Raw can us?

  Claire removes the settings in camera raw completely. You will not see the setting on the thumbnail icon in Bridge

  By default Camera Raw will display the icon and double click on the thumbnail will always open in Camera Raw with the default settings.  The default value is "As Shot", that's why you see no difference. It is when you select a default Custom you want. He will stay with the Camera Raw file.

  See this article by Julienne Kost.

  http://blogs.Adobe.com/jkost/2009/10/setting_new_camera_raw_default.html

  Another difference is with JPEGs. Open a JPEG in ACR, making an adjustment, click 'done '.  Select 'Default Camera Raw' and it will always open in ACR instead of Photoshop.  Select 'Clear' and it's a normal jpeg which is still open in Photoshop.

  Basically it's all I know, I normally don't use ACR much.

• How can I change the speed of a video clip after which makes a smart object?

  In order to apply the same Camera Raw filter for each segment of a clip that I was going to split several times, I have converted the full clip to a smart object, applied my settings Camera Raw filter and then split the clip and remove parts.  Now, I want to do some parts of these clips slowed, but even if I right click on the right side of the layer and select 'Clear Smart Filters', all I see when I right click on the item in the Assembly are query options; I can change is no longer the speed or the audio.  Is it possible to do without having to make all cuts at first, change the speed and audio and then having to go back and convert each individual segment in a smart object and then apply the same filter of ACR for each of them?

  Once you have converted a video clip to a smart object, it is more technically a video clip. All dynamic objects are treated equally, regardless of their content. So, just as you cannot change the read speed of a smart object non-video, you can do it for a dynamic object that contains the video. But if you double-click the thumbnail to a smart object layer, you open the embedded file and you can apply settings to this file-centric video.

• Is there a way to keep the window Photoshop CC open to the original format without using the F key

  Is there something preferably that keeps the window Photoshop CC open to full scale instead of always using the F key to switch between windows?

  lleev wrote:

  Is there something preferably that keeps the window Photoshop CC open to full scale instead of always using the F key to switch between windows?

  You could set up an Action to switch between display modes and trigger it with a shortcut, like the F key

• Photoshop CC on CS6 to open and maintain smart-objects

  Hello!

  Is it possible to open a Photoshop CC file linking psb files it contains on Extended CS6?

  I tried this and apparently all smart objects are somewhat pixelated automatically.

  There is a warning tho and he says 'this document contains unknown data that will be scrapped to keep editable layers. To keep the original appearance instead, choose Flatten to load composite data as a flattened image. "to keep the layers, cancel and flatter to choose buttons

  And when I click the button keep layers, I found that all smart objects are pixelated.

  I see tho on the file .psd files.

  Please advice.

  No, CS6 isn't the feature to link smart objects, so they are pixelated. You have to open them in a CC version that connects SOs then incorporate him bound in order to be able to open them in CS6.

• Documents with Smart Objects - very slow to open and save - Photoshop CS6

  When open and save documents with dynamic objects photoshop freezes the charger of the PS adobe (circle points) is replaced and the system loader (multi color wheel of death) runs for 30 seconds or more.

  What I've tried so far based on different positions by looking at.

  Photoshop Preferenes

  • Reduction in the background
  • Maximize PSD and PSB file compatibility ever
  • Tile cache size: 128 k
  • The advanced GPU settings: Basic & Normal
  • The layer Panel options: no thumbnail

  Observations and workthroughs so far

  • The size of the file and the amount of objects intelligent effects him propelling file that is more intelligent objects, you have the worse it gets
  • These files worked perfectly in PS CS5
  • It also happens on files created natively in PS CS6
  • The CPU is maxing out at 100%, while expenses for PS
  • Suitcase open or closed has no effect.

  System:

  • iMac 27 inches, mid-2011
  • 3.4 GHz Intel Core i7 processor
  • 16 GB 1333 MHz DDR3 memory
  • AMD Radeon HD 6970 M 1024 MB graphics card
  • Mac OS X Lion 10.7.5 (11G 63)
  • Suitcase 4

  Anyone got any ideas? It is making me go nuts!

  A solution!

  It turns out that the problem in my case was in fact the case. Previously, I tried to turn it off, but it does not solve the problem, so this time, I uninstalled it completely and the problem disappeared. Then I started to add new (installed 15.0.1, updated, etc) and the problem has resurfaced with the addition of the specific Photoshop plugin. Removal of this plugin solves the problem. So, it seems that "disabling" suitcase by stopping the TypeCore don't seem to actually deactivate all the tentacles that he sticks in your system.

  You can find the plugin here: Applications / Adobe Photoshop CS6 / plugins / automate / ExtensisFontManagementPSCS6.plugin

  (After a reboot, I also had to remove the font cache, as described here http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html but your mileage may vary.)

  Alternatively, if you do not want to remove the plugin, it disabled in Photoshop seems to work as well. To do this, go to file > Automate > Extensis, click on Preferences..., and then deselect enable Suitcase Fusion 4 - Automatic Activation.

  Fortunately, the plugin does not seem necessary at all to use the main features of suitcase (to activate and deactivate fonts) in Photoshop. I didn't even know what these plugins makes specific app until that research on this problem, and I don't always quite understand the point of them. I guess that they allow you to leave the apps for which they are installed a small bit more their own management (activate a font via suitcase that is not on the system-wide), but that seems to be more control I need - if I am allowing a police, I want that all my software to use it.

  In any case, the problem seems to be solved completely on my system now, although I have all this, so more tests in the coming days is required. I'll post here if problems arise. I'm interested in hearing if this solve for someone else.

• Photoshop: Edit a linked smart object in Illustrator

  I've created a few vector shapes and text in Illustrator and paste in Photoshop as a vector object smart. I re - uses these elements, so I the converted to a linked smart object. Awesome. But now, when I double-click items in Photoshop to edit in Illustrator, the linked file just opens preview (I use Mac OS). It is possible to manually edit the linked file by double-clicking it in the Finder and selecting open in Illustrator. It is possible but not very effective. Converted into a dynamic linked object removes the ability to quickly open/edit my Photoshop vectors?

  Yes, it removes only the ability. To be able to do what you want, you must integrate the smart AI object in your file. It is inefficient.

• The Vector Smart Objects open in Illustrator

  This was good work but after recently update to Photoshop the connection "Photoshop > Illustrator" together seem to be broken. Whenever I try to double-click a vector smart object in the layers panel, I get this (instead of automatically open in Illustrator as before):

  

  Very annoying. I'm on PC. Help!

  Hi dwarflord,

  Please read the following article and let me know if it helps: error: this item is not directly editable in Photoshop

  Kind regards

  Tanuj

• Vector Illustrator to Photoshop Smart objects is more editable...?

  I've just updated my CC and experiencing some weird behaviors between Illustrator and Photoshop. I always start in Illustrator to make my designs (logos, etc. for the vector art) and then build in Photoshop for brochures and other media. I always copied and pasted as smart objects (from Illustrator into Photoshop) and production wise, this is a quick easy workflow - I can go back and change my smart objects by clicking twice if necessary changes.

  However, after update CC two days ago, I feel something I've never seen. When I paste the graphic Illustrator (such as a smart object) I can no longer double-click the layer to edit in Illustrator - I am panic and need help! What they have done or what has changed? It's ruining my workflow and I would really appreciate the help. The alert script error I get when I double click on the vector smart object is "this element is not directly editable in photoshop, but it can be placed in a document. To move the item, drag it into an open document. "Why I'm doing this and why they would change?

  Help, please

  Julie

  JuJuGrafiks wrote:

  The interest to place the vector in Photoshop is not hunting for the dynamic object - it is much too long and then go back to Illustrator. It is a step in the wrong direction, and I can't believe that others are not upset. I would not have updated if I had known this - now my production is at a standstill immensely. Is there a way to express my concerns?

  Your first message is at odds with your last. You said in your first post that you double-click to edit a vector pasted in Photoshop into Illustrator. Then you say you want to go back to Illustrator and "hunt for the object."

  As long as you have the option "add to my current library" unchecked when pasting, it should work as before. Is there something I'm missing here?

• LR4.1: 'Edit In' > 'open as Smart Object in Photoshop... "function. "does not work with 32-bit

  Hello

  I am running LR4.1/CS5/ACR6.7 on a Win7 64 bit system.

  The function 'Edit-In' > 'open as Smart Object in Photoshop... '. "works Ok with raw files (.) (NEF).

  However, when I try to use the same functionality with 32-bit. TIFF files (which came out of the LR4.1 'Edit' > 'Merge to HDR Pro in Photoshop...) ("another feature), nothing happened (the Photoshop windows application opens but out of the picture I have just chosen).

  I used engines research and Adobe online help to see if there was any limitation preventing the use of this feature with 32-bit. TIF files but could not see this note.

  Thanks for your help!

  Albert

  Have you tried convert your 32-bit Tiff in a DNG (could save first...)?

  The new DNG specification is supposed to manage higher-bit images. Maybe the DNG format you will get beyond the issue.