Smart paste, tgroup error table

Similar Questions

• "Smart hard disk error" - HP Pavilion dv6 Notebook PC

  Hello

  I have a HP Pavilion dv6 Notebook PC, which has been meeting for the past weeks starting problems. Normally, this meant a long cycle of-->--> reboot Recovery Manager startup repair until it finally started up properly when trying to 4th/5th so far...

  Now, I get the 'Smart hard drive 301' error message. The "test drive" fails, and I am unable to start my pc.

  Thanks for your help...

  Hello

  Smart disk hard error 301 or failure id XXXXXX-XXXXXX-XXXXXX-XXXXXX indicates the disk HARD on our machine is a failure. You need to replace the HARD drive. It is still under warranry? In the affirmative, please call HP for a replacement.

  In the United States:

  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

  or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://welcome.HP.com/country/W1/en/contact_us.html
      
  Kind regards.

• SMART hard disk error (301)

  I WANT m6-1120sw my friend. When I turn it on it shows SMART drive hard error, said diagnosis: "SMART Check: NOT AVAILABLE, short DST: caution. His old HDD, I replaced it with a new one, but nothing has changed. -What would be a problem with the SATA controller on the motherboard or is it something different?

  Hello
  
  Smart disk error indicates failure of hard drive. You still get any ID failure?
  
  Since you have already replaced it & not showing is not available, the probability is for the connection by defective SATA cable or SATA controllers or motherboard itself.
  What of all the other disk hard test - wide?
  
  Try HD Tune Pro software currently running on the system.
  
  You may have to contact HP for repair.
  
  Thank you

• 15 - e016TX: SMART hard disk error

  When I started the laptop before 2 days I got this smart disk check error 301. I registered number free and portable compain is under warranty, so I have no problem, but I want my hard drive data.

  It's true on some models, but see the manual. In your case, the hard disk appears in the section "automatic client repair" and there is an accessible sign of the customer in order to remove the hard drive and always keep the warranty. Just reseating and affects upward before sending it to HP.

  If he really bothers you to open it and I do not understand if this is the case, there are other ways to get data but require some advanced tech skills as booting from a live recording of LInux and these methods would still require some sort of external storage drive to store data. A large USB key would work. After the back if you want to discuss these possibilities.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP LAPTOP: SMART HARD DISK ERROR

  Hi rebotted my laptop not had long and it is now coming up with smart hard disk error?

  -What can I do or I just take it back.

  Hello

  If you're still on schedule when you can return the laptop, then this is what I would say - a Smart error would indicate that the hard disk is running out.

  Kind regards

  DP - K

• Drive problem hard "smart hard disk error".

  Hello, about 6 months ago, I bought my HP envy m6-1252so, and since then it has been slow til to get totally stuck showing the "blue screen" error message, a month later, I turned on and showed me the message "no device found", then I went where I bought it and they said it was a software problem. That's why the guarantee would not fix because it takes that hardware problems (I have 3 years warranty). A friend, who is a maintenance-pc professional told me that the hard drive has problems and he screwed up, he has absolutely everything deleted hard disk ensuring that it would be totally free from virus and he reinstalled windows saying that I'm having the same problem soon, I had since re - install windows all almost 2 weeks because that the problem won't let me run windows showing me the message "error of. smart disc"and it could not connect to windows. My question is how could get my replacement of hard disk without having the same answer "it's a software problem?

  Sincerely, Milton.

  Milton,

  The "SMART Hard Disc Error' returned by your computer indicates that the hard disk has failed or is about to fail. Please see test of hardware failures (Windows 8) and/or test a hard drive in the BIOS for instructions on testing your computer for a hard disk failure. If the error codes are returned or a test does not complete, please contact the official HP support in your region / country, via the Portal to support HP worldwide, to file a warranty claim.

  You will need to use the HP recovery media, you created when you first set up your computer to restore the computer to a factory state after the hard drive has been replaced. If you create your personal HP recovery media, also contact HP support in your region / country, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• SMART Hard Disk Error - replace hard disk?

  A couple of days, I got an error when I start my computer (HP Pavilion dv6-6071eo), saying "SMART hard disk error" followed by a message telling me that SMART disk check has detected and imminent failure. He told me to my backup files, and then press F2 and do a hard drive test. On the last row, it displays "Hard Disk 1 (301).

  I tried to run the hard drive test, which does not instantly. I also ran the BIOS hard drive test. It meets the short test without problem and then stopped quite some time after the long trial began with the error "Disk Hard 1 full 305. My computer has also been slow over the last week.

  From what I've read so far, it seems that I need to replace my hard drive. Is this correct? If so, it would be a suitable replacement (functional): http://www.dustinhome.se/product/5010151237/western-digital-black-2-5-320gb-7200rpm-sata-300-16mb/#i.... Also, would it not interesting (and possible) upgrade to an SSD for reduction of noise and heat, which is a problem with this laptop (and several other portable simular at HP) compared to other laptops.

  In addition, it might be good to mention that my warranty has expired.

  Have you checked to see if there is a free space left on the hard drive? A complete hard drive will make the system work very slowly and it may also keep the system working properly if it is fairly comprehensive. The fact that you take the short test means that there is nothing major to mechanically wrong with the drive. Just right-click on the icon for the main C:\ drive likely "computer: and select 'Properties'.» If the disc is not actually full, then I suggest to replace. If you can afford a SSD, Yes, there is no doubt that is the way to go. There is nothing wrong on one ssd, other than an occasional fight to install it. I have been using SSD for awhile and I had installation problems we often see reported here, but do not be discouraged, we are here to help.

• Smart hard disk error: "Press enter to continue and it starts OK.

  I have run chkdsk full and sometimes without error, but at startup it says Smart hard disk error. Press ENTER to continue and it starts OK

  Go into the BIOS and run the drive Diagnostics (long version).

  Normally, when you get a SMART disk error this means imminent disk failure.  Smart drive test checks the environment of hard disk and is much more than chkdsk thorugh.

  A cautious soul would replace the disc if the diagnostic test is a failure.

  Is your laptop still under warranty?

  Best regards
  ERICO

• Smart View Timeout errors... again.

  Hello

  I have a strange problem with users receiving the Smart View Timeout error.  In a connection planning, executing business rules, some users automatically receive a message "request timed" out with instructions to "extend the parameters of «ReceiveTimeout, KeepAliveTimeout and ServerInfoTimeout.»»

  I studied this problem online for a solution and has confirmed that the following Windows registry settings are at stake:

  HKEY_LOCAL_MACHINE/Software/Microsoft/Windows/CurrentVersion/InternetSettings

  KeepAliveTimeout 720000

  ReceiveTimeout 720000

  ServerInfoTimeout 720000

  Note that these settings are not present in:

  HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/InternetSettings

  720000 = 12 minutes.  However, users get this message to approx. 30 seconds in the rule.

  I have the same registry settings on my computer, running the same business through the same connection of planning rules, and yet I don't receive time-out errors.

  Am I missing a setting somewhere?  Time-out settings must be in HKEY_CURRENT_USER instead of HKEY_LOCAL_MACHINE?

  Tom

  Hi ToX,

  Yes. These parameters must be created in the registry "HKEY_CURRENT_USER". That fixed the problem for me when I fell on the same subject.

  HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/InternetSettings

  Thank you

  TT

• error code 213:19 what is?  Photoshop Elements will not start past this error message.

  What is the error code: 213:19... Photoshop Elements will not start past this error message

  Error 213:19 | Problem is the license for this product

• SMART hard disk error message

  I have a Pavilion dv4-2045dx and I got the "SMART hard disk error" message since last night after my daughter felt my cell phone and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do.

  Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Hello

  GeneiRene wrote:

  I got this error since last night after my daughter felt my laptop and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do. Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Sorry to bring bad news, but... If you have a SMART hard disk error then the drive is toast. There is no way around that.

  The INTELLIGENT notification system gives you a report that the BIOS sees when it queries the hard disk during the Power On Self Test, he always does before the start in the Windows operating system.

  I hope that you have created a set of HP recovery cd. If you did, then you still have your operating system intact. If you do not, you can buy a replacement of HP recovery disk. They are inexpensive.

  Best regards

  ERICO

• How to paste an Excel table in Dreamweaver CC 2015?

  While Dreamweaver CC 2014 was slow as molasses, at least he had some useful features such as copy/paste an Excel table directly in the HTML code. DW CC 15 now seems so married to HTML5 etc, that DIVs are welcome, but the TABLEs are not. Is there something that I am missing?

  Thank you for understand how to paste an Excel table directly in DW CC 2015, with the same number of rows and columns.

  Hello

  I believe that you are in Live view mode, please move to design, and then try to do the same.

  Also with the DW CC 2015 version, a few amendments to editing capabilities please check them too.

  https://helpx.Adobe.com/Dreamweaver/using/whats-new.html#main-pars_header_18

  But you should be able to do it in Design Mode.

  Concerning

  Vivek

• Insert newspapers in the errors table

  Hello
  
  I want to insert errors in the custom error message table.
  eventhogh is runs properly but I cannot insert rows in the error table.
  
  This is the code.
  
  DECLARE
  v_status VARCHAR2 (20);
  cursor c1
  is
  Select * from all_errors
  When type = 'PROCEDURE '.
  and name = upper ('updatecourse');
  v_rec c1% rowtype;
  BEGIN
  Select the State
  in v_status
  of object
  where object_type = upper ('PROCEDURE')
  and object_name = upper ('updatecourse');
  If v_status = "INVALID" Then
  Open c1;
  loop
  Fetch c1 in v_rec;
  When exit c1% notfound;
  insert into values of error_log (owner, name, type, text) (v_rec.owner, v_rec.name, v_rec.type, v_rec.text);
  end loop;
  Close c1;
  end if;
  END;
  
  Please let me know what to do.
  
  Thank you
  Rami Reddy.

  Why a loop?

  You can manage in a simple SQL statement... (Not tested, just to give an idea). I hope that you don't have the name of this procedure in the two schemas

  insert into error_log(owner,name,type,text)
  select owner,name,type,text
  from all_errors
  where type='PROCEDURE'
  and name=upper('updatecourse')
  and 'INVALID' =
     (
     select o.status
     from all_objects o
     where o.object_type=upper('PROCEDURE')
     and o.object_name=upper('updatecourse');
     );
  

• Customer Conversion error table

  Hello
  
  I'm just trying to find error in r12 customer conversion table can help you just me. I have goggled but I have not found the error table and I do not have access to in the etrm.
  
  
  Thank you and best regards,
  Pallis

  Records with errors are marked with E in the interface table INTERFACE_STATUS column. Error details are stored in the HZ_IMP_ERRORS table. You can also use the TCA import error report

  You can also view note MOS:
  How to import the part using Bulk CAW import the Tables Interface Registery [1451645.1 ID]
  Thank you

• Difference between error and DML error table in OWB 11 G

  Hello
  
  Could you please let me know the difference between the error and DML error table in OWB 11 G?
  To my knowledge, DML errors (such as value too large or non-null values) are stored in DML error tables and referential integrity errors are stored in the error table.
  
  Thank you
  Murali.

  Hi Murali

  Error tables are given OWB violations of rules that look more like errors of logic rather than pure physical errors for style DML errors.

  See you soon
  David