Smart touch want 23: DST SHORT: 'NOT INSTALLED', SEE SMART: "DON'T INSTALL".
start-up: HARD disk failure
Analysis:
(1) reboot
(2) F2
(3) "control of hard disk.
(4) "quick check".
has received: "check the hard disk starting."
10 seconds
has received: "ABSTRACT DST: 'NOT INSTALLED', SEE SMART: «NO INSTALLER»»
Try to determine the root cause:
Drive HARD or HDC/main Board?
If anyone can help?
After having discussed with online support, withdrawal SIMMS to force POST beeps and validate the Council Senior Planner was ok, 1st level has reached the conclusion that the HARD drive has failed.
two options:
1) $89 for 2 TB at best buy with local purchases
2) $349 + shipping for 2 TB of HP support
Option 1 was chosen.
HP envy 23 is running on 10 to win.
Tags: HP Desktops
Similar Questions
-
Control SMART and short CIOS not installed? New notebook
Hello
My parents sent me the 4440 s of HP Probook. I turned it on and it was working fine. No problem at all, but the hard drive was very small. Only 59 concerts. So, I took the hard drive from my old laptop (which still works. 300 concerts) and put it in the new laptop. When I turned it on this pop up.
HP PC Hardware Diagnostics UEFI
-----------------------------------
Version 1.6.0.0 - BIOS
then it gives me the opportunity to perform a verification of memory, hard disk check, language and output. Memory passes test, but when I do the hard disk (quick audit and comprehensive check) check it says controls SMART and short CIOS not installed.
When I click on leave peripheral saus to boot not found, please install system of operating on hard drive.
Here is some of the best. I took the hard drive out and put the new hard drive and little return in the new probook, and the same message appears. I don't know why. I can't figure out what it could be. My father-in-law has a good knowledge of computers, but unfortunately, on the phone it cannot be a great help.
Someone save my new laptop beautiful!
The diagnostic program has done a small partition on the hard drive to it. When you have removed it, so that has UEFI. You need to reinstall as the only one available is the one stored in the BIOS.
Here's that and your BIOS update.
This is for Windows 8.1 as you say this is a brand new, that is my logical guess.
I hope this helps. I used the basic model for it, and it should work. If you have any problems, send the product so that we can check the cross. However, there should not be a problem.
JHS
-
Laptop HP 2000: I have a HP 2000 intelligent control and long DST not installed I have to do
I have a 2002 Smart Check and long DST HP says not installed what I do
When I press B Windows at the same time then push power my caps lock to flash
-
Error: "device driver will not install" when you connect Ipod touch to my computer
Original title: Ipod touch
HI, my Ipod touch is not recognized by my laptop. He says that it not install the 'device driver '. Any thoughts on how to address this... much appreciated.
Hi matthewherron,-What version of the operating system are you using?-Other USB devices recognized without any problems?If it is Windows XP that you are using, run the fix tool provided in the link given below and check if it contributes to the issue of fixing. -
I need to reinstall xp on my nx6125
I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker
Hello
Yes, you can use this COST to install Windows XP. However, you must have Windows XP.If you face any problem regarding the installation of Windows XP.You can contact our Windows activation service.Here is the link: -
original title: install netplwiz
I want to set up a PC to connect automatically to the field on switch. Netplwiz is not installed
Hi BobSpence,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows forum.
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Microsoft says so that features welcome to user login or switch to work I need to uninstall the Client Services for Netware. It is not installed, or is it activated. It is currently disabled in the access to the local system. I want these features back!
Look at these articles and see if you meet all the conditions to be activated fast user switching:
"The fast user switching option is not available.
<>http://support.Microsoft.com/kb/280758 >"A discussion about the availability of the fast user switching feature.
<>http://support.Microsoft.com/kb/294739/ >I guess that you are not connected to a domain.
HTH,
JW -
computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers
Hello
You should not have a password to reinstall Vista.
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Windows Media Player not play either allow me to record a few songs that I download on limewire. Some are AVI or THE or something else. I want to know can I install so this media player allows me to listen to and record.
Windows Media Player not play either allow me to record a few songs that I download on limewire. Some are AVI or THE or something else. I want to know can I install so this media player allows me to listen to and record.
The link below shows list you formats supported by Windows Media Player, audio and video.
http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0071.mspxIf you downloaded something not supported by WMP, then you will have to google for a converter. There are many FREE online converters.
t-4-2
-
I don't know how or why it happened, but one day to another, WMP won't open. I tried to open an MP3 file, and he says that WMP has not been correctly configured "Windows Media Player is not installed correctly and must be reinstalled. Do you want to install the player from the Microsoft Website? ».
I assumed that since I had to make some updates yesterday, that he was at fault, it had installed an update/new version of WMP and it was either buggy or doesn't work do not, so I went to the Windows updates, but no recent updates on the list had a remote connection with Windows Media Player.
So, I accept the first proposal of the error message, and I'm headed to the Windows Media Player download page on the Microsoft Website. However, the version I should install (which was the one I already had) has Windows Media Player 12 for Windows 7. But this option is locked for me, and as I tried to install it, it says it is not compatible with my system. Not to mention, it's a whole package and not just the WMP installation.
I tried everything and nothing seems to work. It won't even let me uninstall WMP because it won't let me open.
My OS is Windows 7 Home Premium 64-bit. And the error messages that I get to try to launch any WMP feature (the tool, the installation program, no matter what), opens an error window stating that "there is a more recent version of Windows Media (12.0.7601.18150) player already installed on your computer. It is not possible to use and more old (12.0.7601.17514) installation package to install files or repair your current version of the reader. »
Please, I ask for any intervention in this case.
This arises from time to time, but I don't think that there is a difficulty of 100%.
You can try (in no particular order)
- uninstall, reboot, reinstall WMP- http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/ if that doesn't help, try a SFC/scannow check - http://support.microsoft.com/kb/929833
- There is this diagnostic tool - http://support2.microsoft.com/mats/windows_media_player_diagnostic/ that can help (from http://support2.microsoft.com/fixit/en-us?wa=wsignin1.0 )
- You could try a system restore to a date before the problem occurred to see if that helps - http://windows.microsoft.com/en-us/windows/system-restore-faq#1TC=windows-7 and see if it gets a WMP work back
- Last resort, a repair install - http://www.sevenforums.com/tutorials/3413-repair-install.html
- Or just simply forget about WMP and try another party 3rd multimedia player that you can install and uninstall at will, as free VLC - http://www.videolan.org/vlc/
But it may be worth waiting a while to see if someone else has a better solution.
-
Running Windows 7 home Premiun 64 x. Click to open the program the message pop up "Windows Media Player is not installed correctly and must be reinstalled. You want to install the Player from the Microsoft Web site? "that it takes to the site and there is no available media player Windows 7, installed WMP 11 does not work either. Tried to turn on and back on... did not work
Do you remember the last time that your Media Player worked properly? You can use the system restore (type it in the start menu to find) to go back on this point. This restoration takes about 2 minutes and will not affect your files - no matter how far you go. It simply restores your system files and settings.
-
want to 5530: error: is not installed driver for WSD print device
I'm trying to install the software on the HP Envy 5530 contect to my Dell Windows 7 Home Enterprise laptop runing. I have installed and uninstalled. use the web and the installation disk but when I check the printer it shows a warning triangle with an exclamation point (!), which tells me he needs in case of a problem. I get the error "WSD print device driver is not installed. Please help me.
I think I tried your 3 bullets without result. I tried to print wireless HP Center regions, but I'll start over and focus my efforts in this area by the top.
Seems not a problem of the printer "not found". The printer Hp Envy 5530 is listed. but shows an icon indicating the troubleshooting is required. See this link from dropbox http://1drv.ms/1zODxEY
Having said that, however, when I try to print your word document, I got a message "no printer installed": http://1drv.ms/1AgOqEE
Bottom line, it is not resolved yet. Dang it.
Thanks for your help. I persevere and hope to get it resolved. I will answer when I do.
-
I'm trying to get a certain nVidia ethernet driver. He continues to appear on windows update. Whenever I install it, my internet no longer works and I have to install it runway map mother dvd.
Can someone tell me how to download a windows update, but not install it and then install it manually?
Thank you.
It doesn't have much of a difference if the Ethernet cable is connected to the network card during the installation of the drivers. For better is honest, it shouldn't be a complicated procedure, and if the Windows driver is the cause... just ignore and continue to use the driver provided by the OEM.
-
My watch Smart 2 will not install applications that even he is paired with my Android phone
Previously, I use Sony SW2 with Samsung Note 2, there is no problem.
But when I change my phone to Mi3 romaric, first the phone does not recognize SW2.
After a few days, the phone could find SW2 and coupled with the magically (probably through updated material?)
But I can not install applications on the SW2, except the Runtastic app (I can change the face of wallpaper and shows the phone from my phone without problem. »
I think it might be due to an INCOMPATIBILITY between SW2 and Mi3, which could be due to the configuration of each party or the update.
I can do on the side of SW2? Help, please!
Unfortunately if it is due to consistent problem, we cannot do something. At least whether furture update that the proponent of the product make it compatible with the two device works correctly.
Manage to find that some post relate to this hope, to help to solve your problem.
-
P6-2335ea: failure of DST short hard drive
Hello
I did a fast hard drive test and the DST short hard drive failed,
Failure ID: 98EKU4-0007TB-X87T0K-60W803
A fast response is appreciated with kindness
Thank you
Model number P6-2335ea
Product ID c3T84EA #ABU
Well, if this is the case, it must be too late to consider waiting. A new hard drive seems to be in order. Given that the post says Windows 10, which is the updated "free"? If this is the case, then order a 1 TB hard drive to replace the failed unit. On the restoration of the OS, I have to assume certain things
(1) you do not have the recovery put DVD to reinstall Windows 8, as it was
(2) you do not really want to reinstall Windows 8, on the new hard drive
(3) If you have access to a working computer and can make windows 10 media creation dvd site M$, you might be able to reinstall Windows 10 using this. Of course, any other software that has been installed on the old drive before it failed will be lost, unless you have the information you need to reinstall that, too.
Considering that the computer does not start, I have to assume the worst condition for the reader. It is perhaps not completely watered and important data cannot be retrieved, but don't count on it.
Let me know how things go once the drive is replaced.
Maybe you are looking for
-
RN104: 6.4.1: could not open the folder with a large number of files
Hello world. I have a situaton that I can not open a previous file created with a large number of files stored in it. There at least 2000 photographs, and when I try to browse, the content is never displayed. Curiously, traversing a small file with s
-
Open the custom container qml page... doesn't work do not
I have the custom object container which is given below import bb.cascades 1.3 Container { layout: DockLayout { } ImageButton { minWidth: 160 minHeight: 150 defaultImageSource: "asset:///images/button_container_90x130.png" horizontalAlignment: Horizo
-
Create table ORA-01031: insufficient privileges
SQL > indicate user USER is 'TEST_RPT.SQL > CREATE TABLE mytest (id NUMBER); - it does not workCREATE TABLE mytest (id NUMBER)* ERROR at line 1: ORA-01031: insufficient privilegesSQL > CREATE TABLE TEST_RPT.mytest (id NUMBER).Table created. SQL >SQL
-
When I create a document using a template from my library, I find that all of the text I included in the text box is scrollable and visible, but after the signing, users are not able to scroll the text and cannot see what is visible in the text box i
-
Illustrator is not download files access cloud creatives...
Im trying to access the form of adobe Illustrator files. None of the files are for download in my library. It is said: something was wrong initialization library creative cloud?