Smart wifi EA6300 problem

Similar Questions

• How to remove several networks in the Smart WiFi Linksys

  I hope this is the right place to ask this question, if not please me foregive. I recently replaced my router with a WRT1900AC and after installation, I use my account for smart wifi Linksys to the Manager of this router that I used with my old Linksys router. However, when I noticed two other networks listed as to connect to networks of connection. They do not connect what either and I think that they are of my old router (I used the same network name). How do I remove these? They do not seem to be causing the problems, but are confused. Thanks in advance for any help!

  Ken

  Hello! Articles on the following link will help you remove the existing networks on your computers, portable devices or game consoles: http://www.linksys.com/us/search?text=remove%20networks&type=support_faqs

• Need help with the Smart Wifi EA6400 association

  I set my router several months ago using the password provided with the Quick Start Guide. I have never changed the password. I have implemented all our family computers, laptops and iphones using the same password and have never had any problems of access to the internet. Two weeks ago I put in place our new Sony smart tv by using the same password without any problem.

  Until today, I had never set up a Smart Wifi account. Now that I did it, I can't associate my router on the account. He repeated to me that my password is not valid. How this can be when I was able to implement using this password. Even the properties of the router is showing this same password. I am trying to get into the router to set up a password for comments.  After reading a bit on the forums, I have even tried using "admin" and which was too disabled. I am at a loss here and need advice on how to proceed.

  Hi Stormy_01. By combining the Smartwifi account to your router, do not use the password you use to connect wireless. It should be the password to access the router configuration page. By default, the password of the router is "admin". If it does not, then go to this page I gave in the previous answer and click on the 'Forgotten password' option that should send you the link on how to reset the password of the router to your email.

  Furthermore, the rest of wireless devices are connected properly and are now working through the router, is that correct? If so, then we only need to focus on the recovery of the password in the configuration page or edit if you can access your settings. If all else fails, your last option is to reset the unit and start from scratch.

  Liezl-10104

  Linksys technical support

• Iconia A1-830 has a Wifi connection problem when 3-5 meters

  I bought Asher Iconia A1-830 at BestBuy and after 10 days, I discovered the Wifi connection problem. If you stay near router (1-3 meters) the WiFi signal is good (not excellent). If I go into another room - Wifi connection is poor or disabled. I changed it to another (same model). The second model is perfect only 1.5 months and now she has the same problem with wifi connection. Can someone help me? Maybe the problem in my router, but why it worked 1.5 months?

  Yesterday, I received my return of repair Acer Iconia. They wrote the reason of the problem: reconnected hold of WiFi to the motherboard. It now works like new!

• Can X 3500 be a Smart Wifi router so

  I recently bought an annex X 3500 DSL A + combined router.  I don't see this router appointed under the list of Smart Wifi.

  This firmware can be upgraded to have full feature smart wifi?

  Hi anseetha, there no WiFi Smart firmware for X 3500 when I checked the Linksys support site. Linksys introduced 6 routers WiFi Smart. You can check it out here: http://www.linksys.com/en-us/smartwifi?icid=Linksys-Home-Networking-HN-FF-smart-wifi-link

• Password WIFI WRT110 problem

  Hello world

  I have a very strange problem.  First of all, I told chapter of wireless security WPA and typed in my password.  However what connection in my name of the wireless network of my password never worked.  Second, I completely disabled security and tried to just connect without any password, but I was still asked a password however.  I checked and checked and saved the settings by ensuring that security has been turned off, but I was still asked for a password when choosing my wireless network!

  I could probably restore my WRT110 to factory settings, but I don't want to lose the other configurations as some open ports and IP addresses, that I opened for the firewall.

  Is it possible for me to fix my WiFI password problem without restore factory default?  I just need to understand how to operate the the WiFi passpharse.  Here's what I have here:

  Security mode: WPA Personal

  Encryption: TKIP

  Password: 0sunspot0

  The key renewal: 3600 seconds

  However, when I get my wireless network and try to connect by typing in 0sunspot0, I get an authentication failure.

  I'm doing something wrong?

  Thank you

  Victor.

  Save all your settings, so you can restore them after a reset.  Remove the password completely and try to connect without password.  If successful, go back and add WPA2-AES with a new password without special characters.   No test.  If no joy, hard, reset the router and restore it from your back upward and try again.

• I can not connect to smart wifi router outside of the House?

  Hey.

  I need to portforward port for logging in my smart wifi router Linksys EA6500 from the House to the outside? I can only connect when I am om LAN or wifi...

  Another question: I can only connect to the same router using an application? Is there a way to connect via a browser?

  THX.

  When you have created an account for your WiFi Smart router, have you received a confirmation e-mail? Check your email and you must confirm it so that you will be able to use it. Refer to this link ofr more information: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=12e0e8fa76f340739d0cb72037819ca9_Creating__activat...

• Question has Smart wifi

  I had my account smart wifi on my ea6500 but I just upgraded to wrt1900ac and now I see both routers on the account. How can I delete one of them? Thank you in advance.

  Leo2005 wrote:
  I had my account smart wifi on my ea6500 but I just upgraded to wrt1900ac and now I see both routers on the account. How can I delete one of them? Thank you in advance.

  Try this. Disable your account for a few seconds so that your email address will lose the connection he has with both routers, and then reactivate your account and associate the new router (WRT1900AC).

• EA2700 Smart WiFi unable to connect

  I can't connect my router via the Smart of Wifi utility EA2700.

  As soon as I put on the router, I used the CD it came with and attempted to implement. While I was in the range of the router and I can see it in my list wireless, I couldn't set it up.

  I came the usefulness and using the prompt of windows 7 I was able to change the SSID and I got a generic password.

  I was able to connect my laptop to the router with the password and access the internet.

  When went to set it up via the Smart Wifi utility using the same password I can't access it. My laptop is connected, but I can't access the router in the utillity.

  Directly, I have connected my laptop to the router with a cable right cat5 from the Ethernet port of my laptop to the port on the Router #1 and tried the utillity smart wifi. Still I can not connect.

  I tried to use that the IP 192.168.1.1 in the browser can still connect.

  I tried to use the CCC Web site still nothing.

  Prompt repeat me the invalid password, you mind right now I already have logged 3 more devices with the generic password.

  Any advice will be greatly appreciated.

  Have your tried using "admin" instead? You have not exactly set up the router using the Cisco Connect Setup Wizard, so the router password is not the same as the password of your wireless network. Login to http://192.168.1.1 or http://myrouter.local and use "admin" password. If you have upgraded the firmware on the router during installation, you can also go to http://linksyssmartwifi.com. Here, you can access the page locally (use 'admin' password again) or create a Linksys Wifi Smart account for cloud-base access.

• HP Pavilion G6 - no WiFi Signal - problem "Broadcom 4313GN.

  Hello

  My laptop (HP Pavilion G6, PN: QG846EAR #ABU) with Windows 7 Home Edition is to have through its WiFi connectivity problems. The WiFi hardware is recognized as "Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n" by the Manager of devices but it cannot detect all autour WiFi signals. I tried deactivating and activating it by FN - F12. This action works, but does not affect the situation. Initially it was the driver version 5.100.82.82 as of the 20.05.2011.

  I found two new updated driver from Broadcom and HP sites, but none worked. (ver: 5.100.82.95 - date: 1.4.09 and worm: 5.100.82.139 - date8.5.2012)

  I restored default Windows 7 Home but this does not work either.

  I started with Fedora and Knoppix live CD but none managed to see any signal, even if the two detected the correct WiFi hardware.

  I have checked and then changed the values in the BIOS by default, but this did not help.

  When a WiFi USB is plugged in, the PC works fine.

  Under the battery, the WiFi device is referred to as "bcm94313hmgb".

  Any idea?

  Say hello to new mscag.

  Thus, one of the sons is not connected?  It's probably the cause of your problem.  Take a look at your notebook PC Maintenance and Service Guide.  Specifically, look at page 54, which deals with the removal of the WLAN card.  He says that there should be two wires to disconnect (main and auxiliary antennas).

  I can't say very much in the picture, but it seems that you should be able to reconnect the loose wire.  I suggest this thread connected and if this does not resolve the issue I would then contact HP support.

  HP to support an appeal to the United States / Canada you can call to the 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  Let me know if plug this cable solves your problem.  Have a great rest of the day!

• WiFi intermittent problem. Win 10 think it is connected when there is no Internet.

  WiFi intermittent problem.  I have a 2 month old Dell Inspiron 15 5559 with dual band Wireless AC 3160 adapter Intel.  I connect via WiFi, start Pandora with Chrome and everything works very well for a few hours.  I monitor the status of the WiFi and noticed that when the speedometer drops to simple numbers temporarily, then resumed at 50 Mbps or more a second or two later, my browsers (Chrome, Firefox, IE, Edge) no longer work even if icons indicate "connected, secure" and LAN activity continues.  Pandora and all other browser activities cease until I have disconnect and reconnect.  The router, I had this problem with that is a TP-Link wireless-N that works perfectly with other computers, but I purchased & installed a D604 of D-Link router wireless AC to see if this can solve the problem.  It has exactly the same problem on both the 2.4 and 5 GHz bands.  Device Manager displays an Intel driver version 18.11.0.8 dated dated 22/06/2015 apparently normal and no! or? any where in the list of devices.

  So the obvious conclusion is that when the power of the signal is temporarily less than 10 Mbps for a second or two, then returns to the top 10 Windows thinks there is a good WiFi connection when it is not.  Disconnect and reconnect always solve the problem, but it's an obvious bug, and it's a pain.

  Hello

  I'm glad that you finally got this driver to install.  Microsoft has done a lot with Windows 10 trying to reduce the energy consumption on laptops.   In some ways, that has caused some problems with the wireless, making cards more susceptible to interference.   I hope that this driver will clear up many of the conflicts and problems that you see.

  Let us know how it goes.

  Todd

• Problems of NAT for Xbox a Live, AC1900 Smart WiFi router model # R7000

  I can't get NAT open for my Xbox One, it is set to moderate right now. I tried to turn NAT, filtering to open, address reservation, go wireless Ethernet, port forwarding / port triggering TCP/UDP 3074.

  Any help would be appreciated

  Yes, that's all. So, your ISP is NATing your traffic. Your situation is similar to the guy with the WiMAX. I went and found this thread.
  https://community.NETGEAR.com/T5/Nighthawk-WiFi-routers/NIghtHawk-r7000-PS4-NAT-type-strict-3-issues...

  This guy had to call his ISP and ended up paying for an address public IP NAT problems. You will need to contact your ISP and either ask a public IP address, or ask them how to configure their gateway port forwarding. Read the other thread.

• The network connection issues of comments with EA6300 (Linksys Smart wifi router AC1200)

  I have a friend who runs a Bed and Breakfast, and it is problems with guests to be able to connect to the Guest network.  She bought this router on the recommendation of Best Buy Geek Squad, after that she had a few problems with his predecessor.

  Everything is configured correctly, the router seems to work very well, especially with the normal network.  Network comments can be seen, with a decent amount of signal strength, but when people try and connect to the network and try to use it, they are never invited for comments login screen.

  I was able to verify that it works in fact - I helped set it up, but apparently there are several people who use Android phones and tablets and iPads that do not receive a prompt to enter the password of comments and continue.

  Is there any manual addresses can be entered in a browser to access the web connection screen invited?

  OR even better, is there a way to assign the password to the guest SSID as a normal wireless access point rather than allowing customers to connect to a password-promptless guest SSID and must try to finagle screen comments for pop up password?

  It's very frustrating for both my friend who runs a business and myself who are in favour.  The router is defective?  Y at - it a new firmware?  Any help would be appreciated.

  Hi troybenedict. For Android tablets and phones, there is an option there to forget the network.  Let them do first and connect again.

  In addition, they should asked for the password only when they begin to access Web sites.  They do not have that?

  You can also check the number of comments allowed Guest Access tab. There are limits the number of authorized clients.

• Toshiba 40RL938 WiFi connection problem.

  Hi, I have a Toshiba 40RL938 Smart TV.

  I have a wireless access Point and I would like to connect my TV.

  No matter which network configuration option I choose Easy, assisted or manual.
  At first, when I enter the security key and configure all, it seems that it connects.

  There is a "Complete wireless configuration" information, IP and DNS address is automatically assigned (do manually didn't work as well). Technology tests the network connection and ends with information upward "unable connect network connection, check them as network settings." Is there something I can do, or perhaps TV is just broken?

  WiFi works fine for my computer and mobile phone. On the same distance from the AP television (about 3-4 meters, no wall or obstacles) the intensity of the signal's average on the TV and excellent on my computer. DHCP works very well. ,

  Can someone help me? :)

  In my opinion your problem isn t only connected to the TV but I think that it of a combination of your router, modem and settings.

  In my view, you must first disable all security options (encryption, password encryption, mac address filtering, etc.) in the settings of your router and the modem. Then try to connect the TV to your WLan again.
  If it will connect correctly, so you must change your encryption type.
  Also try different kinds of WLan standard as 802.11 A, B, G or N (if supported by the router)

• Cannot access Smart WiFi in cascade mode

  I have the following Setup.

  My modem ADSL ISP is the main router with DHCP and its address is 10.0.0.138 who, for some reason, I can't change.

  I booked 10.0.0.1 for my EA2700.

  My EA2700 Port 1 is connected to my wireless Internet service provider router Port 1 creating a way of editing cascading of Lan-To-Lan.

  DHCP and NAT is disabled on EA2700.

  Both channels WiFi (2.4 GHz and 5 GHz) is defined with the same name and password so devices can connect to one of the routers and it works fine.

  The only problem is that I can not connect to https://www.linksyssmartwifi.com.

  When I connect to https://10.0.0.1 I can connect to my EA2700, but I get error 2113.

  Ignoring the error, everything works.

  I tried DMZ of 10.0.0.1 on my main router but it does not help.

  When a router WiFi chip is cascaded Lan to Lan you cannot remote access via WiFi Smart services.