Similar Questions

• The document _ is on a volume that does not support the permanent version storage.  You will not be able to access older versions of this document once you close.

  I recently started getting this strange message, usually when a Pages document is closed:

  «The document _ is on a volume that does not support the permanent version storage.»  You can access older versions of this document once you close. »

  All my research (apple.com and on the internet) have not enabled all the information on this message.

  Hi Larry,

  The 'volume' is a hard disk, a partition on a hard drive or a storage as a USB device.

  OS X automatically saves your document frequent while you work on it. If the volume of the device / it records on a summer formatted to allow 'versioning', you will be able to use Time Machine to open previous versions of your document. If it has not been formatted like that, you get the message see you, and only the current version of the document will be saved.

  Kind regards

  Barry

• What does that mean? -This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.

  I tried viewing a presentation power point and got to page 2 and my computer crashed.  Thought on... what he did previously trying to display a PPP file, but I thought that it was not my computer to the actual file.  now I have my doubts and also this time an error message came that said... This problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  can someone tell me what I should do next?

  You left out which version of DirectX has been shown.

  As far as I know, your Intel 945GM should support DirectX 9 and because you have XP sp3, you must have at least DirectX 9 installed.

  I met the following, but it shouldn't apply to Powerpoint:

  Some such as the Intel 945 GM Intel video cards have a design limitation which may cause problems when you try to run the Source Engine games. 3D graphics kernel does not support transformation of material, light and the vertex shader to similar technologies, which is an important part of the pipeline of 3D acceleration. Instead, this functionality is emulated in software that can reduce the compatibility and performance with 3D games.

  I don't have a solution for you (assuming that DXDIAG, in fact, reports to have DirectX 9 or higher).  You can see if you install a new driver support, but if it were me, I would be first contact Acer technical support or ask your question in another forum as one of the following conditions:

  Intel graphics Forum: http://communities.intel.com/community/tech/graphics
  Forum PowerPoint: http://answers.microsoft.com/en-us/office/forum/powerpoint (select the corresponding forum for your version of Powerpoint).  Include the results of DxDiag, including the version of DirectX.  If there is something unusual about the image that causes the crash, include this info as well.

  Normally, for notebook/laptop computer, it is better to get the drivers of the mfr of computer rather than the manufacturer of the device.

  Acer drivers for your computer are here: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=535 (you want the Intel VGA for XP driver)

  Intel has a newer driver: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Internet+Devices&ProductLine=Netbooks&ProductProduct=Mobile+Intel%C2%AE+945GM+Express+Chipset+Family
  It's the main Intel support page: http://www.intel.com/p/en_US/support/highlights/graphics/945gm

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL

  Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL.

  It's sad to see how Samhrutha answer to the question in this way.

  The driver does simply not good.
  The only option to address this situation in the meantime a driver that works, disable features in ' Configure, Advanced tab "on the actual card.
  Different properties exist here. Try to enable / disable some of them. It helped for me on Win7 x 64 ASUS MB.
  Kind regards
  fundutzi

• Installation of older Versions of CC (not appearing is not in the previous versions tab)

  Installation of older Versions of CC (not appearing is not in the previous versions tab)

  Hi Karen,.

  If you do not get the options to install the previous version in view previous version option on the CC desktop app, it can occur for the following reasons.

  (1) If you have already installed the previous version

  (2) if the creative cloud is not enabled on your machine

  (3) with the help of a version outdated cloud creatives desktop application.

  Please refer to the following links.

  For installing previous versions CC https://helpx.adobe.com/creative-cloud/help/download-install-app.html#topic-3

  Activation of the questions Solve common Adobe Creative cloud activation of (log) and questions (disconnect) disabling or error messages

  https://forums.Adobe.com/message/8389127?et=watches.email.outcome#8389127

  To uninstall the desktop application uninstall the Adobe Creative Cloud desktop application

  For installation Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Please let us know if the above information is useful for you.

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• CS6 does not start, the trial version will open instead of the real version

  After reinstalling my system of time machine cs6 does not start, the trial opens instead. Serial number is not accepted. What should do?

  Hi MFGTG,

  I checked the serial number and found that there is a problem with the serial number.

  I advise you to please call our 800-443-8158 support or start the conversation by clicking the below link

  http://helpx.Adobe.com/contact.html

  Thank you

  Kapil

• why sometimes the trace file does not explain the plan?

  Hello
  
  Sometimes, when I 'alter session set sql_trace = true' and run some querys, some of them don't see explained the plan in the trace file?
  
  I tried "alter system RAS shared_pool" before starting the trace, but not luck.
  
  (Oracle 10g R2)
  
  any ideas?
  
  Thnks
  Miguel
  
  Published by: jmmnunes on Apr 27, 2010 18:01

  some of them don't watch not explain the plan in the trace file?

  Log out of your session after you set the trace sql false?

  All cursors must be closed to have access to all the information from the row source in the trace file.

• Apple TV appearing does not in the airtime.

  OK, so here is my problem. I'm at my fathers House. I want to show a video on the TV with its apple tv. But under the airplay icon its apple tv does not appear. I can see its apple tv from iTunes and play music or a movie with her on his tv, but I don't see using airplay to reflect my office. Any ideas on how to get it to work?

  We have solved the problem. After reading several other posts on problems with ATV, we checked the operating system. Of course, there was an update. After the software update, it worked as it was supposed to. Now, it gives me confidence to get one of the new mountain BIKE for me.

• My edited icon does not replace the previous version on the desktop

  I use CVI 7.0 on Windows XP. I used CVI icon editor to create an icon 32 x 32 for my application. The target parameters build cutting edge of window to file icon and displays correctly. I also created a group of files in the window of Distribution Kit and the group contains only the .exe with the option to create shortcuts on the desktop. I build dist kit and install it, him and everything is fine. The icon appears on the desktop and launches the application.

  The problem is when I change the icon file. The modified version appears in the settings of the target (great so far), but when I have the dist of rebuilding kit and install it, the old desktop icon is not replaced by the new although the old icon still launches the latest version of the app. I have not changed the GUID between generations, so running setup.exe kit dist first deletes the previous version of the application and its icon on the desktop. The second round of setup.exe installs the new version of app but the old icon.

  If I change the name of the icon file every time then the correct icon appears on the desktop. However I prefer to use a generic icon for each version file name. It of like CVI or Windows associates the first version of an app icon and remembers that the association is updated using a different icon file name.

  So the question is, how can I make sure that the latest version of the icon appears on the desktop do not have to change the file name each time?

  Mark,

  I got a solution to nickb. This can be found at http://decibel.ni.com/content/message/8480#8480. I'm new to these forums, so I don't know why it seems to be in a different for your response area, unless somehow I posted the original question in two areas. In any case, in case there is something wrong with the link, the solution is to delete the cvibuild. Directory and then recompile the project. I found more than remove the resources.res file was sufficient. As I said to nickb, it would be good if CVI deleted this directory automatically to ensure a clean build each time.

  Thank you for your time.

  Tom.

• (1) acrobat cannot send the DDE command. (2) adobe air does not download the latest version

  (1) adobe acrobat pro can not open and always send message fatal errow "Acrobat cannot send the DDE command '.

  (2) one.    Adobe Acrobat cannot open because adobe air cannot successfully download the latest version
  Reader adobe b. cannot create PDF because adobe air cannot successfully download the latest version

  Hello

  ·         What operating system is installed on your computer?

  ·         Did you do changes on the computer before the show?

  Question 1: Acrobat could not send DDE command

  Try to launch acrobat in safe mode, follow the steps:

  a. press on and hold the SHIFT key and double click on the acrobat icon and open a pdf file.

  b. If it opens without crashing after about 15 seconds, then you have a faulty plug in, locate and remove it from your plug-ins folder.

  c. to remove the plug-ins, you can contact the Support of Acrobat

  Question 2: Adobe air download does not last

  You can try to Uninstall and reinstall the program.

  Let us know if this information useful.

• 7 the window does not have the latest version of EZ macros (even if the last update, I can find 2008)

  Greetings!

  I think I can't be the only Gamer/encoder out there who still does not want to run this program. I know there are better Macro options out there but the ease of creation and
  Speed/price of this program, I used since 1997 and I hope that someone knows how to do so that it can run in Windows 7.

  I have updated with the latest updates for the OS and I ran through the emergency program. If I put it in "The program additional permissions" it will actually start the program and I get the prompt to let the program do change etc. etc. (yes I put tell me every detail :) but whenever I try to create a macro using the option do not forget mouse and keyboard I get the message, 'Unable to set the Hook'.)

  I had more with a very old version of EZ macros at first but after completing the troubleshooting, I found myself in the same place.

  If I just do a clean install and run the program I get the message "the server returned a reference" (not exactly what he says but very close).

  Someone at - it a line on how to get this program to install. After purchasing a second computer I don't want throw 30-90 dollars for a program of macro that is probably more that I need and will last 10 times more memory than the older program.

  On the site (AmericanSystems EZ Macros), version 5.1 is the most recent and the one I use.

  Thank you in advance if someone does not know what to do

  GMR
  

  Hello

  Try to run the program in Windows XP compatibility mode and check if it helps: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

  If this does not work, then you can get in touch with the Publisher of the software to the latest version of the software available.

• Simulator appearing does not in the JDE

  Hi, I installed JDE 4.1 downloaded a bunch of Simulator packages and install them.

  My JDE still don't shows me that the original list of simulators in the preferences-> Simulator-> general tab, although I expect to see the new simulators that I just installed.

  No idea what's going on.  Already restarted JDE and the computer.

  BBLiker

  I think that "automatic" simulators detection was added in JDE 4.2 - I think that you must manually add the Sim Card to the JDE 4.1 and earlier versions.  Take a look at these KB articles both for more information.

  Support - BlackBerry JDE does not recognize previously installed simulators
  Article number: DB-00596
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801083/support...

  How - to connect the JDE to a specified set of Simulator
  Article number: DB-00059
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/How_To_-_Conne...

• Smartphones blackBerry email appearing does not in the Inbox 'correctness '.

  People,

  I have a BB Bold 9000. It has been fine synchronization for two accounts (work and personal) for almost a year now.

  This morning I updated the software (for USB/Desktop Manager), I think, OS 5, but I don't know what version.

  Now, emails on the personal account - virgin .net - make their appearance in this box the mailbox with the small red 'new message' asterisk appearing OK. On account of work - xxx.org.uk - emails are received by the device but do they not appear in this "Inbox". I can find if I go in the 'messages' folder, but no "asterisk" icon to tell me that I have new emails to work.

  I don't know (I hope!) it's something relatively simple, a setting somewhere, but if I had a good glance around the various options, I can't find anything relevant. It was working fine until this morning and I can send emails from the BB on both accounts.

  Any help gratefully received.

  Donald

  donmacn wrote:

  I think that, OS 5, but I don't know what version.

  Pretty easy to determine exactly what that release: look at the Options > about, third line down, starting with a 'v.5.x.xxx '.

  donmacn wrote:

  Now, emails on the personal account - virgin .net - make their appearance in this box the mailbox with the small red 'new message' asterisk appearing OK. On account of work - xxx.org.uk - emails are received by the device but do they not appear in this "Inbox". I can find if I go in the 'messages' folder, but no "asterisk" icon to tell me that I have new emails to work.

  Open your main Messages folder > Options > Inbox settings and check the box include what email accounts you want in the main Inbox. These UNchecked will only keep in their specific e-mail folder.