Smartphone blackBerry pearl 8130 for telus not finding gps signal

Similar Questions

• BlackBerry Smartphones Blackberry Pearl 8130 voicemail number

  I recently bought this phone (less than 2 months ago), and a week ago I started having bad to retrieve voice messages left on the Blackberry phone.  Note that I am able to retrieve messages from the Blackberry using a landline or another phone.

  With the help of Blackberry, I call voicemail.  He says I have 'X' number of new messages, then you hear 4 key 'beeps' and then it crashes and deletes messages.

  Note that I have a 1 GB memory card in the phone, and I tried to clean up the memory.  That did not work.

  I bought this phone online through the website of the provider of services a large cell on 30 April.  1 week ago today, I'll be back & on the phone with technical support of the cellular service provider.  Today, they told me that they could not reproduce the problem.  They told me to go to a cell authorized local service center, I did this afternoon.  The centre for authorized saw the problem and said they could not fix.  The best they could do was to charge me $35 and have a phone handed to nine sent in 3-5 working days.  They also asked if I bought insurance for the phone, which I did not.  In 5 years of possession of cell phones, this is the first time I've ever had a technical problem of cell phone (also the first Blackberry that I owned).  Pay $35 for a Blackberry "renovated" is not an option.

  Help, please!  Thank you very much!

  Brent

  Voicemail is not a function of device (BlackBerry or other). It is a problem of carrier, contact your operator.

• Gel blackBerry Smartphones Blackberry pearl 8130 AddressBook

  On my 8130 BBP, whenever I have save a new contact in my address book, my phone freezes and I have to activate my phone market twice, after that an error message appears: error message is: eception exception: application net_rim_bb_messageing_app (79) does notprocess teriminated.     Most other times, the error message says bb_address_book_app.           It is likely?

  Thanks in advance

  First of all, do it now: with the BlackBerry device powered on, remove the battery a few seconds and then reinsert the battery to restart.

  Now, try to save a contact again. Possible?

  Otherwise, try this, open an existing, make any changes to the record and SAVE contact. Works?

  If this isn't the case, you may simply need to reload the operating system on the device.

  Shout back if this is the route to take.

• BB of Smartphones blackBerry pearl 8130 custom ringtones

  I am a newbie (had my bb for Christmas) and my experience so far has not been very pleasant. I've assigned personal ringtones.  Initially, they worked very often for some people, and now they don't work for everyone.  I had to have the phone wiped out this past Wednesday and I have everything set up again through the profiles, exceptions etc and now NONE of them work.  I don't even know who's calling me, because the names don't pop either... just the number with the default ringtone.  I tried EVERYTHING I read and nothing works.  I just a phone of shit or what?

  any help, suggestions, etc. is GREATLY appreciated, I'm at my wits end.

  OK, I went through all new and found the uscellular implemented video and re did everything new.  My father called me and it worked.  I called myself the phone of my mom and my home phone and they worked.  so unless he starts to act up again, I'm going to consider this problem solved... I'm keeping my fingers crossed.

  Thanks for your help!

• BlackBerry Smartphones how do I know if the Blackberry Pearl 8130 has Windows mobile 5?

  I need to know if my Blackberry Pearl 8130 works with at least windows mobile 5 prior to purchase of the Babylon Mobile for Smartphone that requires it. Options - everything is said version 4.5.0.66 (Platform 3.2.0.48) but I can't determine if it's the version of the Blackberry or the version of Windows. In fact I do not know if it works with windows. Can you help me?

  BlackBerry has a different operating system.

  It's RIM OS.

  It's not Windows Mobile.

• Could not set the audio volume on BlackBerry Pearl 8130

  Hello

  All first of all information about the device and the JDE:

  Device: BlackBerry Pearl 8130 (Bell)

  F/w: 4.3.0.66 (Platform 3.1.0.35)

  JDE: 4.3.0.1r

  Our application reacts on the main events of entry of the volume keys and set the audio volume accordingly in increments of 10. While net.rim.device.api.system.Audio.getVolume () works very well and returns the correct value, we are unable to adjust the volume. Adjustment is made through net.rim.device.api.system.Audio setVolume(int volume). Calling the method seems to succeed because there is no error returned. If we call setVolume (90) after that getVolume() return 100 the next call of getVolume() returns 90. However there is no noticeable change in volume. Even though getVolume() returns 0 audio is always heard.

  Play media files is via MMAPI, i.e. javax.microedition.media.Manager and javax.microedition.media.Player.

  Please note that the volume control works very well for BB Pearl 8100 with firmware version v4.2.1.101 (Platform 2.3.0.80) but fails for the above device. Application is signed.

  How is it possible to adjust the audio volume of BB Pearl 8130?

  CDMA devices (xx30) do not properly set the volume if you use the setVolume(int i) function.

  net.rim.device.api.system.Alert.setVolume (int x) is also available.

  Maybe it works!

• BlackBerry smartphones can not connect BlackBerry Pearl 9105 for PC

  Hello world

  I have the following problem:

  After using my BB Pearl 9105 for almost 3 years, I can not connect to PC more (I still menu with choice of 3 options on my smartphone when I connect, but when I click on that option "usb" or "charge", the menu appears again).

  In addition, the PC does not recognize my smartphone as a usb device. Updated BlackBerry Desktop Software and the purchase of the new Micro-USB cable did not help.

  I can still load.

  Could anyone suggest me how to solve this problem?

  Hello and welcome to the community!

  Here is a list of troubleshooting items... I hope that something will be useful:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone because of administrative permissions
  • KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when user account control is enabled
  • KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when a full version of Roxio® Media Manager is installed
  • KB28456 BlackBerry Desktop Software is unable to detect the smart phone BlackBerry when the USB selective suspend setting is enabled
  • KB28444 The BlackBerry smartphone is not detected by the BlackBerry Desktop Software, when connected by USB to a USB hub or a docking station
  • KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when connected via USB
  • KB02640 Troubleshooting USB connections
  • KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
  • KB00125 BlackBerry Desktop Software cannot detect the BlackBerry smartphone
  • KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
  • KB00019 PIN code not displayed in BlackBerry Desktop Redirector
  • KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
  • KB01451 How to enable Sync advanced logging if a wired synchronization fails
  • KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer
  • KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
  • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...

  In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

  Check also on the incompatible software... it was reported that NTI Shadow Ninja & software can cause a conflict; Remove and reinstall the desktop software BB allows to install correctly.

  My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these. Also apologies if all are not currently available... RIM takes their monte and descends at will as they revise things.

  I hope that something it is useful!

  See you soon!

• Issue volume ringtone blackBerry Pearl 8130 Smartphones - not loud enough

  What I did:

  Entered in the media / ringtones / choose a ringtone melody / set as ring tone.

  I've also went in the Media options / audio boost on.

  I have the ringtone to play / click on the bb request button to bring up choices: when you are asked to activate the handset volume is so low that I would never hear my phone ring.  When I choose turn on speaker it's the volume that I prefer.  When I leave here and think that when a call comes in it would be again to that volume, it is not - the volume went from how far I could never hear it if the phone was not right in my hand.  Even when I set to Loud - profile (2 vibrate ringing and then ring), it is barely audible.  I know that the phone can be stronger, because I heard it.

  I read a message that you can change the volume by entering the profiles of boards, but when I click on profile my only option is to choose a (Loud, vibrate, quiet, normal, phone only, off) - I don't have the option after pressing the button bb to open other choices.

  I have all over my bb pearl sought other places to find where I could do the volume stick in higher volume, but nothing helped.  Help!

  Found my answer - ended up going to the store of Bell Mobility and the seller helped me with it.  Thank you!

• BlackBerry Pearl 8130 smartphones it will support 8 GB Micro SDHC card

  Hello again once, I was wondering if anyone knows if the pearl 8130 will support a micro 8 GB sdhc card?  SanDisk has no info on blackberry, (if the phone can use this card or not) and I just wanted to know if someone has one, and it works ok?

  Thank you!

  8 MB cards are supported if your handheld OS is 4.3 or higher.

• BlackBerry Pearl 8130 Smartphones display icons

  I have a Pearl 8130 and problems with an icon on my screen.  I think it has to do with the calendar event reminder, but I have not received any notification and the icon will not go away.  It looks like a square with a dot in the middle (a bit like a VHS tape).  (Yes I just dated myself

  It's just boring - nothing wrong with the phone.  But I had problems with my Pearl because this is my second.

  Anyone have any suggestions?

  That would be an indicator of voice message from your operator.

  If you have a voice mail waiting icon wandering on your home screen:

  • Call your voicemail and clear the message.
  • You can call your BB from another and leave a message. You BB, call your voicemail and clear and delete your messages.
  • If the above fails, with your BB under tension - pull your battery to reset and restart your BlackBerry.
  • Change your theme and see if it persists and return to your desired theme. (Options > theme > select.)
  • Clean and reload your OS.

  Good luck.

• BlackBerry Pearl 8130 ringtones Smartphones

  I just bought my Pearl 8130. It is an awkward question, but where can I find

  the place where I can change the ringtones? I've read that I must go to 'Profile'

  but I don't know yet what it means or where it is? Thank you.

  Access PROFILES. Scroll down to ADVANCED. Once your PROFILES opens click on your profile that says ACTIVE.

  Once there you can scroll to the phone or any setting you want to change. Once inside, you can choose your ringtones.

• Smartphones blackBerry device software upgrade, does not (Bold 9930)

  Bold 9930, Verizon,.

  Everything was going well 5 hours ago. Backup and synchronization with Desktop Manager and everything was good. I clicked on the 'Device upgrade' link. He me everything first download and install the new Desktop Manager software. This seemed to work properly. Then it downloaded the new software device and conclusive to upgrade of the unit.

  7.1 bundle, 2705 (v7.1.0.991 platform 5.1.0.678)

  The Setup program indicates that the new software has been installed, and then it seems to want to reboot the device. The device never returns, ends with an App error 606.

  I loaded the cool device software, without change. Removed Software Desktop, loaded fresh, then loaded a fresh device software, without change.

  I tried to load my old device software but the Desktop Manager will not allow him.

  I reloaded software device 3 times, always the same behavior, always the same error at the end.

  I'm out of ideas.

  Any help?

  Hello and welcome to the community!

  brunostyle wrote:

  I tried to load my old device software but the Desktop Manager will not allow him.

  This bit is quite unusual... done correctly, you can force any OS on your BB package as long as it's your exact model number. So I'm not sure if you're really using all the good stuff... so, even if a lot of this will be redundant, please examine carefully for subtle tricks do you need to... done correctly, this can heal the situation. But any errors on the way (not ignored, stage not completed correctly, etc.) invalidates the whole process and translates the automatic process of support and limited to only the OS packages currently supported by your specific carrier.

  The easiest way is, on a PC (you can not do on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• BlackBerry Smartphones Blackberry Pearl 9105 maps

  I have a Pearl 9105. There is no icon for the maps so I downloaded the Blackberry site maps. I downloaded it twice, once via a device and once via a PC. Twice, I received a message stating the complete installation and the unit restarts, but I can find maps anywhere on the device. Icons in the menu are set to "Show all" and nothing is hidden. I have a data plan with my service provider, but it is not specific to Blackberry (BES) non-registered). Is someone can you please tell me if Blackberry Maps is compatible with Pearl 9105 and if so, how can I make you properly install and use it.

  Do I need a Blackberry data plan for cards to work.

  It is available for the 9105.

  However, your data plan should be specific for BlackBerry Maps BlackBerry.

• BlackBerry Smartphones BlackBerry contacting Support for help

  I bought an App in Blackberry AppWorld call Quicklaunch. I was able to install the application on my device, but it says that I need an activation code. I went back and read all correspondence related to this, and it seems that I never received. I have also connected through my camera to BBApp World 'My World' to retrieve the registration without success.

  So now I am trying to reach Blackberry Support by filling the forms online and when I get to the page where I clicked 'submit' I get the message:

  Please correct the following items:

  • Please provide a valid Smartphone Blackberry PIN

  I have double/triple checked this several times and I put in the correct number. I have same box the package originald BlackBerry which is the correct PIN code. How to solve this? My BlackBerry PIN will not work when trying to get help for a paid program activation code I've ever received. I know this been answered several times already, but the common response is "I'll PM you the information.» How can I get help with this?

  Good luck, I don't know it's no fun to call them, but it's really the best option for your situation because none of the technicians App World follow this forum and your of is an issue that has to look at their end.

• BlackBerry Smartphones Blackberry Pearl phone book

  My blackberry pearl was crushed by a vehicle. I can receive and make calls, but my screen is not working. I need to find a way to transfer my phonebook from internal memory to my sim card, but I don't see what I'm doing. How can I do this? I don't see any option when it is plugged in to my computer and make a backup of any file and put it on my press card. Please help I have a lot of numbers, I need.

  John

  Don't try to transfer it to your sim card.

  Desktop Manager allows you to make a full backup of the device.  Get your replacement camera, then restore the backup to it.  In addition, you could synchronize with Outlook and then sync again.  However, the backup is the easiest way if you are going to get another BB.