Smartphones BBM blackBerry problem please help me.

Similar Questions

• Smartphones BBM blackBerry problem. Help, please.

  I can receive messages from bb, but I can not send. And if, by chance, they are going through it takes about twenty minutes! Can someone PLEASE HELP!

  IM using bold 9780.

  Remove the battery while your phone is on, then replace it a few seconds later.

  Let us know if that helps.

• BlackBerry Smartphones really annoying problem - please help

  I plugged the headset to my phone while I was on the plane yesterday.  Today, every time I try to make a call, I see that the phone has failed in this setting, so I don't hear anything, even if my headphones are no longer connected to the phone.  I have to press the menu button and then activate the handset.  I tried for a while to fix, but I gave up.  Can someone tell me please how to fix this?  Thank you!

  Really weird... try to put the helmet back, using it, and take out them, see if cela deativates it somehow.

• Smartphones BBM blackBerry problem

  I used to be on a former rate (Tesco) and I had not all services of blackberry, but for some reason, I went on bbm and entered a random name and what not, even if I knew that I would not work (stupid, I know) I have blackberry services on my new tariff, I can't really the bbm to work?

  This statement can to solve your problem, http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=97381B84CAE4236B4384C6C76A2C5029?...

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• BlackBerry Smartphones BB APP WORLD v. 1.1 PROBLEM - Please HELP!

  I am a new user/owner of a BB Curve 8330. In the options screen, it said c. 4.5.0.77 (Platform 3.2.0.51). I'm not sure what these numbers correlate exactly with (operating system, software device, etc.)-pathetically.

  This morning, I tried to upgrade to the new version 1.1 BB App World. I think I can get screwed up. When I installed it, it asked me if I wanted to remove the 1.0 version, and I said 'yes '. After installation of v. 1.1 and rebooting, I tried to use the new version and I always get the following error message:

  "BlackBerry App World is had problems connecting to the server BlackBerry App World. Check your network connections, and then try again. »

  My phone is not compatible with this version? I can't understand. I was going to download the 1.0 version and reinstall, but I can't seem to be able to find this version available for download.

  Please help - I don't know what to do.

  Thank you in advance,

  TDS

  PS: by the way, I know my network connections are fine. Everything works as it should.

  Here's the answer to the question I was trying to Irdawg a Newbie CrackBerry.com:

  Model: Curve 8330

• BlackBerry Smartphones Re: 9360 Curve problem please help!

  An error occurred contacting the client BlackBerry World. If you have a content protection enabled on your device, please disable and try again. the same message that I get when connecting my laptop... Please help me

  I think that you... I think that you have tried. But, from what you say here, I have no idea exactly what you have tried. There are the specifics... The KB numbers would help. But telling us just what you have said so far we, we cannot say anything on what you actually tried and therefore cannot give you next steps as we have need to exclude what you have already tried. But you need to tell us exactly what you have tried (even once, would help the KB numbers).

  Please consider that we have only your words to guide us... nothing more than that. So far, your words have all the details to help us understand what you have already tried. I think you you tried something... I have no idea what it was.

  Thank you and let us know.

• Smartphones Desperate blackBerry for more help

  Hi all, I REALLY hope that one of you lovely people can help! I bought my 12 years the 9360 for his birthday, he arrived and he was delighted. Inserted the sim card and turned on, once he had loaded the screen appears a second before the red light comes on and it reset itself... Its been re - boot from that I tried to connect it to the laptop desk BB application, but it will not connect please help someone

  Hey Derek,

  I think that you are in trouble, have you not tested before buying because the rest of the process can be difficult for you and we can not say clear it will work, so if you want to try to start your machine in safe mode (you need some time to get this) as I said, and then you had to connect your device to your desktop software BlackBerry to force detection your device using the application loader How to force detection of the smartphone BlackBerry using the Application Loader

  For this you need BlackBerry desktop software that you download from here BlackBerry desktop software

  Try it and let you see

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• Resolution / gambling problem please help me

  OK, I have vista 32 bit and when I get in any game at all and play... then get out of the wreck is fine... but then when I restart the Res changes again in the wreck the last game I played was set to and if the game does not have my native resolution it mess everything up on top of my desk and its starts to become annoying if someone could please help me because I really don't want to personalize then go to display settings and change every time that I log on... I tried to uninstall the latest software, tried to use the yahoo answers and they are not any help, MY RIG: AMD Athlon x 2 Dual Core 6000 + 3.1 Ghz, 8600 GT, 4 GB of ram, vista 32-bit , 22 inch monitor, native res: 1680 x 1050, Cyborg keyboard game... and I have IE8, any other information you need to know please ask me. Thanx

  Maniac of Vista,
  If you think that the problem started when you installed the Extreme 3D Pro stick, have you tried to uninstall it to see if the problem goes away?  Who will tell you for sure if that's the problem, you can access the web site of the manufacturer and see if they have a fix for this problem, or simply reinstall the software for the joystick could fix.

  You can also try to do a restore back before the problem occurred:
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know if this helped, or if you need further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I had a "Blue screen" problem, please help me!

  Well, I don't really know the source but it happened several times already, here are the details of the error:

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini091109 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8A90628F
  BCP3: 9CCAEDB0
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Information about the server: 7ec0ad43-82ec-418c-af58-c7d4e1d1d9e8

  copied and pasted this information of view problem history in Control Panel and it was the biggest mistake, what happened is that the PC I use suddenly gets a blue screen with big writings saying something like she stops by unexpected error. After rebooting, it says "Windows has recovered from unexpected shutdown" and gives me a chance to see solutions on the net, but the work does'nt. Fortunately, I don't have an error for hours, but I'm afraid it may happen again. Please help me.

  My laptop has:
  AMD Athlon processor
  1 GB of RAM
  1.60 Ghz
  ATI Radeon X 1250
  Windows Vista
  120 GB hard drive (33 GB free now)

  I think that the mistake occurred whenever I might have too many applications open, especially in the section of the status bar, that I can't do it, please help me!
  Thank you.

  Hello

  Think the drivers - do all.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Hi people I have some hard drive problems, please help :)

  Hi guys, I just bought a Sata HDD internal 2 TB, but I do not see it in 'my computer', but when I go to computer management I see, I tried to do something with it, but an error pops up, I treid deleting and creating a new partition, but just before the end, I get this error : "The operation failed to complete because the disk management console view is not updated.  Refresh the view by using the refresh task.  If the problem persists close the disk management console, then restart disk management or restart the computer. "Please help. TNX

  Did you try to restart and try again as he proposed?  Assuming that you I had two ideas.  First of all, if your system is not aware of Windows updates, I would now.  Secondly, I have had good success called Easeus Partition Master that you can download from http://easeus.com .  I see they have a page for a free version 9.1 for users running the environments of 32 and 64 bit to http://www.partition-tool.com/personal.htm .

  I hope this helps.  Good luck.

• BlackBerry Z30 please help me in a big mess

  My z10 told me restart the phone because my videos where not not opening after the reboot happened to show ing just the name from blackberry to the red light, then he turned completely off, help pleease cos it is a phone friend birthday is today, and I've totally ruined, please help

  This article might help you.

  It is not, you can claim a warranty or take it to a phone repair specialist.

  Good luck.

• Windows 7 blue screen problems, please help me

  Hey guys, I'm using windows 7, my laptop these past two weeks have blue screen problems. When I boot my laptop, and I use internet after some cell time but I have a blue screen with MSG (Message Details: to your computer. igdpmd64.sys PAGE_FAULT_IN_NONPAGED_AREA)

  If this is the first time that you have, "

  Please help me, there are the details:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  
  

  BCCode: 50

  BCP1: FFFFF8811C177B60

  BCP2: 0000000000000000

  BCP3: FFFFF880067A5A18

  BCP4: 0000000000000005

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  
  

  C:\Windows\Minidump\042414-20155-01.dmp

  C:\Users\manjeet varsha\AppData\Local\Temp\WER-37752-0.sysdata.xml

  Read our privacy statement online:

   

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\System32\en-US\erofflps.txt

  Here is an article describing how your problem may be related to a bad Windows Update.

  http://www.InfoWorld.com/t/Microsoft-Windows/Microsoft-pushes-another-botched-automatic-update-213802

  KB2670838 update uninstall can solve the problem for you.

• BBM EXTREEMLY URGENT - please help ASAP

  Hi, please help. This isn't a matter of life or death... but close enough. I have a Samsung Galaxy S4 and tried to e-mail 1 large cats bbm history for me and my bbm crashed. Now, I don't see no bbm conversations. I don't see my contacts, but not cats. I rebooted my phone and it asked me for my password. I forgot, so I reset my password. However, I still have the same PIN bbm and bbid. Only a new password. How to get a cat bbm? My service provider can help you, or is my missing bbm cat ever? Thanks, much appreciated.

  To make sure that I understand it looks after BBM crashed, everything works again, but your previous conversations in BBM surveys are missing? If so there is no way to restore those individual BBM chat unfortunately.

• Table and the loop problems (please help)

  Im making a site for a project where I have to include a table and a loop.
  
  For this section, I put in a "contact us / Q and A" page where the user can enter a name, email, and question.
  This information is sent to a table and then following image shows the form of the table information in the dynamic text boxes.
  
  I've included a loop to check that each part of the table contains data (name, email and the issue).
  Then I have an If Else, which clears the form either if a section has been missed, OR if the form was completely correctly it directs the user to the frame following where as I said above the details appear in dynamic text boxes.
  
  The problem im having is the loop to check For the table that's a waste. Someone can please help me out here and get the loop to verify that all fields have been filled.
  
  Here is my code for the initial frame
  
  

  You must update the values in your table at the time you press the submit button. Code follows

  There is a second example to check the strings (it's a little complicated, but it's a useful trick if you can understand). This does not leave the Send button work unless all fields have something in them