Smartphones blackBerry salvation to all!

Hi all!

I'm Dado and im a new Member here...

I just my new BB curve recently and I have a big problem... I can't unlocked my phone because of incorrect password. and I made 8 attempts but still incorrect. and yet a have 2 chances more... can you pls help me and give me advice if what my next step will be to do this... I don't really know what to do now. How can I unlocked my BB curve?... plsss help...

k in advance, im hoping for your reply, my friends...

Hello and welcome to the Forums of Support BlackBerry.com.

You have to remember the correct password and if you think you are right... There is just nothing you can do other than hurt him enter and leave the unit to do a security wipe, then the unit will be allowed to use, you just lose all your personal information, data, messages, addresses, etc..

Tags: BlackBerry Smartphones

Similar Questions

  • Smartphones blackBerry 'Reply to all' instead of 'answer' for email

    Hi all

    I'm brand new BlackBerry and storm. I bought mine last weekend. Everything seems to work fine (after storm number one back bought Saturday night in New York and replace by Storm # 2 the next day in Baltimore from number 1 would not deducted).  A question... I see how to respond to the electronic mail on the storm, but what happens if you were one of several recipients and wanted to use 'reply to all' instead of reply only to the sender. I had no problem making it on my ATT Tilt but could not understand how do on the storm. I thought it might be something like hold on longer response... then I looked at the menu, but it was a no-go. Can someone help me with this? Thanks in advance!

    Wayne

    Hello and welcome!

    To reply to all, with the message that is displayed, press the BB (the button to the right of the green phone button). In the menu that opens will be 'reply to all '.

  • BlackBerry Smartphones BlackBerry keeps beeping all the time - just beeps when the connection with the carrier is active.

    Gentlemen.

    I have a Curve 8900 with the 4.6.1.133 (Platform 4.2.0.85).

    This unit maintains a beep every 10 seconds, I tried to remove the battery when the BB was on, wait a minute, put it again.

    I looked at all the configurations.

    I Don t no the slightest idea and wanted to throw it in the window.

    Any ideas? Advice?

    NEW INFORMATION. The device stores only beep if the wireless connection with the carrier is active. If it s off the beeps stops. I m using Claro to the Brazil.

    Camilo

    I found the solution. This is a bug beetween the network operator's SIM card software and the BlackBerry device. It s already solved. I had to follow certain steps to enable and disable a specific feature of the network operator and wait a dialog box confirm my operation.

    The beeps comes with the dialog box, but the apears only dialog box if you are in a specific screen of the blackberry. If you are in the home screen, it will not appear and you hear the beep.

    Camilo

  • How can smartphones blackBerry I delete all my contacts?

    Hi all!

    I just want to know if it is possible to delete all my contacts (on the phone memory) only once, because delete them one by one is a little annoying...

    Thank you

    Val

    Yeap this is possible.

    Connect your device with BlackBerry desktop manager. Go to the black and restore-> Advanced-> on the right Board, you will see all the databases of device. Select Address Book - All and click clear.

  • Software blackBerry Smartphones Blackberry, essential and all applications applications non-tiers are missing

    I use a BB Torch 9800. I just upgraded to the latest Desktop Software to 6.0 6.0.1, and all the elements of the object are missing from the field of Applications. I tried to go back to 5.0 since 6.0 is not available. Same problem there. A clean uninstall section and reinstalled 6.0.1. Still no luck. Also tried to install the software for the device AT & T 9800. No luck. If I go to import files, I can find the AT & T alx files, but they will not matter. How can I return the stuff of Blackberry? Thank you.

    The device software is indeed necessary, unless its doing an update via the web. This means that DM comes in contact with your operator for the latest OS for your device and if he sees you need to upgrade then it will download and install automatically.

    Have you downloaded the OS of your own carrier or another carrier? Try to go to c:\program files Research in motion\apploader and delete the file named "vendor.xml." Then try again.

  • How can smartphones blackBerry I clear all, back to the original White phone?

    Hi all!

    OK, after 1 month of this phone, I had and want to sell it (probably ebay) and need to know how to clear all information out of it and return to the original new settings. Also, how can I clear the phone w / blackberry for someone else may register it?

    Thanks much for any help!

    Hello

    Please follow these directions for instructions.

    Good luck!

  • Smartphones blackBerry email, mark all as open

    I have a few emails on my storm, and I don't want to open all new emails on this subject, so how can I mark all open so I do not have the icon at the top of the screen constantly indicating that I have no intention by e-mail? TIA, Steve

    If you click on one of the date fields that separate your emails, you can choose "Mark prior opened. Doing so will mark all day and open back.

  • Points of view application for Smartphones blackBerry "BOLD" on all the time

    Hi gurus. Is it right to let the "BOLD" on its charger when running (to use the clock)?

    Absolutely perfect.

    I leave normally mine on the charger all night during sleep with the clock display (and all of the alarm).

  • My screen blackBerry Smartphones has been frozen all day? Help, please!

    Okay so I recently bought a blackberry 9800 torch of my friend, its not in poor condition but it has a few scratches on it. the phone also worked well for her.

    This morning, installed an app to rename my files of music, called MTagz or something like that

    directly after the installation, a grey box with a blue loading circle sign and the word loading it appeared. I thought he'd go after a while, but long story short, he didn't.

    Ive tried to restart and turn my phone off, then on, but it won't work. If I could, I would like to uninstall the app, but my phone is completely insensitive.

    I can enter my PIN and password, but as soon as the shoes at the same time the touch screen home screen and keyboard do not work. I can also press the menu button to switch between windows, but when these windows open again I can't do anything.

    Thanks for your help

    Hello and welcome to the community!

    Given your procurement method, I recommend that to start here:

    • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

    Ensure that all measures are properly carried out in order to completely divorce the BB from accounts of friends and thus to be able to create entirely what you need for you alone.

    Regarding your question as stated, I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • BlackBerry Smartphones Just accepts updates my Blackberry Desktop and all THE Photo and video recorded on the Media Manager went

    Hello! I just accepted updates my Blackberry Desktop includes all Blackberry Desktop manager treats me like a new. And freaked out as all THE Photo and video recorded on the old Media Manager Media Manager are worth more than 3 years gone-Its photos and videos that I have stored on the Blackberry Desktop that existed before the update

    Really freaked out because these photos are irrepalcable would appreciate advice thanks

    Hello

    Have you checked to see if the pictures are found in your Documents folder by browsing until then on your computer system?

    What version of the Desktop software update you? Select the [?] is the top right and select "on BlackBerry Desktop Software. Version 7.1.0. ? or 7.0.0. ? or 6.1.0. ?

  • BlackBerry Smartphones ONLY transfer Contacts between Blackberry's without all the data and settings again BB

    Anyone know if there is a way ONLY to transfer all my contacts from one Blackberry to another Blackberry without transferring all the data and settings to the other Blackberry with the device switch Wizard?

    Hi and welcome to the forums!

    If you have a full backup of the old Blackberry, use this .ipd file to restore only the contacts on the new device.

    If your contacts are up to date in Outlook do a one-way Outlook for contacts device synchronization.

    Thank you

    Bifocals

  • BlackBerry Smartphones Blackberry Priv bricks during update MM

    Hello everyone,

    As a user of BB for a long time (since the curve 8310 until the Passport), I couldn't resist the temptation and I ended up buying a private AT & T unlocked the B & H store in Manhattan during my vacation.

    As soon as I come home in Spain, I started the MM updated procedure with an autoloader, according to the following instructions: http://global.blackberry.com/en/support/smartphones/blackberry-PRIV/reload.html

    I downloaded the SW AAF355 version and drivers USB (computer restarts after the installation).

    Installation script has detected the Priv in fastboot mode after lowering the volume + key combination of power and apparently started the update, but suddenly the phone restarted with black screen and led flashes between purple and green.

    Quick notes: I've updated devices BB10 via autoloader a couple of times and I did the update did not complete successfully using Mac OS (latest version), but I tried tha same procedure from a W7 PC too.

    Now, I'm still stuck with black screen and led flashing and computer does not detect the phone more. I tried all combinations of possible keys try to restart the phone but no luck.

    So I ask help to members of the community on what can I do to get it fixed, cause I think that the problem of Mayor is I'm in Spain...

    Thanks in advance.

    OK, it seems that I finally I could remedy then I'll write the steps that I followed, just in case.

    In my case, I was not able to start the phone in following mode fastboot with all combinations of keys, and the computer it has not detected:

    -Low volume + button.

    -High volume + button.

    -All buttons pressed at the same time.

    But after some trial and error, I pressed the middle (the toddler between flight up and down) button + power button and the phone started in mode 'starting'

    The computer detects it and loaded MM autoloader (first attempt get stuck again, but a 2nd went until the end). After that the phone boot up normally.

    Thanks to all the members of the BB community and have a nice day!

  • BlackBerry Smartphones Blackberry Curve 9310

    I started the download of MP3 music on my Blackberry Curve 9310, OS 7.1.

    It has been loading for 2 days and my phone will not work.

    I did and A:LTt RST, but it did not work.

    I pulled the battery several times and plugged the charger, but that did not help either.

    My phone is still stuck on loading.

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • BlackBerry OS Smartphones Blackberry Bold 9900 software update from version 7.0.0 to version 7.1.0

    HELO everyone

    I tried to upgrade my device software Blackberry Bold 9900 version 7.0.0 to version 7.1.0 but with difficulties. I tried to use the Blackberry Desktop Manager, but there was no version 7.1.0 figure among the available updates. Even when I tried to do it directly through the official website of Blackberry, also Version 7.1.0 was not shown. Finally, I tried to do the update with my phone directly by going to: Options > device > software updates.

    It shows my Version 7.0.0 Bundle 2406 current and available in a version 7.1.0 Bundle 1149. But when I clicked Perform Update to download the new version, he has shown preparing to download but then displays an error message such as "Download cannot continue because your device cannot connect to the update server using the following methods: Wi - Fi.

    During this time, I did not upgrade with a Wi - Fi connection because I have an active blackberry data subscription of 2 GB of my mobile operator.

    Please I need help on how to perform the upgrade from version 7.0.0 to version 7.1.0 with the last packet.

    Thanks to you all I'm waiting for your helpful solution.

    Hello and welcome to the community!

    The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • Smartphones blackBerry 8520 bb curve blackberry software doesn't have a software device blackberry for the device you have connected to the computer

    the last time that I update it this is in version 5, but when I click on update download update again and suddenly, it was frozen and the result when I start my bb is reload software: 507

    I read on the forums, but I can't work with this

    Hi and welcome to the Forums!

    On your PC (you cannot do this on MAC):

    1) uninstall all the BB OS packages from your PC,

    (2) make sure you have the BB Desktop Software already installed

    (3) download and install to your PC, the BB OS package you want:

    (4) If this OS package comes from one carrier other carrier for which your BB was built, then remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    (5) run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

    Do not forget to save.

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

Maybe you are looking for

  • Satellite L300D-135 - some keys stop working after a few minutes

    Satellite L300D-135 (PSLC8E-02P013EN) portable model, boot cold keyboard is fine. As things warm up the keys R and there stop responding as do 7890 keys. May be heat related. The keyboard has been replaced, old and new are doing the same thing, so it

  • build the table high sampling frequency

    Hello I have implemented a simple vi which curve data from incoming analog channels, and when you are prompted to save the data, it generates an arrary. When recording is complete, the data is written to a file. I use a local variable between while l

  • Windows does not allow me to update the drivers for my Nexus 7 (USB port)

    I'm having a problem connecting my Nexus 7 compressed (version 2013) to my desktop. I've successfully connected to my laptop. The two computers running Win 7 (64). When I plug the USB cable in my office, says Windows is to install the device driver s

  • Battery charge problem

    Good evening. The problem with the battery of my XPS 17 L702X started a few months ago. My House has lost power 3 or 4 times in 2 minutes while my laptop was connected to the grid. Since then, my laptop not charging the battery. The message is: "plug

  • Driver Ethernet dc7600 small format

    I installed Windows XP Pro on a DC7600. Everything works except the Internet connection. I went to the download site at HP for this model and downloaded 2 Intel network drivers. I can not connect to Internet. Can someone tell me where I can download