Smartstream pourrait this?

Similar Questions

• Satellite L665D - sound is not played smoothly - crackling sound

  Dear readers,

  I am the owner of a toshiba l665D and there is a problem.
  Whenever I have to use something to involving
  sound looks like garbage.
  The sound is not played smoothly there are breaks, and there's a big cracking
  sometimes sound in it.

  It's not because of the speakers, I also tright through the headphone output tube.
  Pourrait this possilybe because of a card of its damaged.

  It's sound really garbage and the laptop is not yet 2 years old yet.

  What could be?

  Hello

  I think that this is unrelated to its faulty card but due to the old driver TSRI (Intel Rapid Storage Technology).

  I found a thread on the issue very similar.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60231

  Update TSRI (Intel Rapid Storage Technology Driver) to the version V10.1.0.1008 or later to resolve this issue.

  I recommend trying this!

• BSOD; very frustrated, please help

  Hello

  Unfortunately Ive had some problems with dota 2 reborn only. It breaks down random r.
  during the games, the screen freezes, scratches appear which get more with time, his stutters or immediately off that then requires me to reboot the system. It happened in the main menu where the screen turned black. on rare occasions, the game crashed on the desktop. These patches, which included memory leak fixes made a bit more playable. I can play games anymore with accident (ca 2 in a row, and then again after a reboot)
  Ive tried the obvious things such as checking game files, update steam, reinstalling the drivers, playing with the settings driver/ingame, different launch options (dx11, autoconfig,...) reinstall directx/vcredist included in the record of dota etc. until the recording of disc and file system errors corrupt.

  other questions:
  -launch option - gl is not working properly. the game is loading, but the main menu is just a black screen with the steam overlay notification flashes in the upper left corner. It actually works with vista or windows in general?
  -J' have had a beta folder in version of dota 2 called "dota" with old files cfg, game files. pourrait this cause issues?
  -My fps in main menu almost changes each time I launch my game. It ranges from 22 to 40 fps ca. the fps rate durin, the game is good

  the equipment works fine otherwise. I have no problem with other games of hunger for resources such as the insurgency or ghost recon ghosts. mayb theres a problem with the allocation of RAM, directx optimization, a steam bad driver detection or detection system/video card (video.cfg). could u please take a look at the mdmps, the newspapers, the dxdiag etc to help me understand what these random crash due r?

  Thanks a lot for your help

  FILES

  https://www.dropbox.com/s/mmmbfg3kb0yx99w/DotA%202%20crash.zip?DL=0

  Minidump

  https://www.dropbox.com/s/20k00x8luog8a30/Mini112315-01.dmp?DL=0

  These accidents are called BCC116 and are associated with your video subsystem.  Please follow the instructions of this wiki

• Lost internet connection of TZ205W

  I have a new TZ205W firewall, updated when installing to (I think) the SonicOS latest version 5.9.1.0 - 22o. The WAN port is connected at the border FIOS.

  After several hours of working properly, it loses its internet connection. At that time:

  • I can access is no longer remote,.
  • They no longer ping the WAN port,
  • He cannot ping internet addresses, and
  • I can't access the internet from the local network.

  However, I can ping it and connect to the administration of the LAN interface. As soon as I have it reboot, I again have access to the internet from the local network and can ping/access it remotely. Once it's down, it never comes back to the top unless it is rebooted.

  I have already tried these things:

  • Restarted "Current Firmware with factory default settings", and then he reconfigured the wizard and stick to the simple minimum configuration (i.e. leaving out my VPN and most of my NAT policies); It is exactly as I do for my several other TZ205Ws who work in other networks, except for the intellectual property-specific information.
  • Re-uploaded the same version of firmware, and then reset to factory default settings and it reconfigured as above.
  • Called the ISP to see if there was any possibility of a problem MTU, a conflict known between their unit and SonicWall, or maybe they could see certain types of traffic from the router that could make in being blocked on their side. But all they can tell me is that they see no unusual activity and not responsible for my router, only them that sits on the other public IP address on the same circuit. My other router provided by the ISP to another public IP address (connected to the same switch on the WAN side) doesn't lose connectivity when the SonicWall; However, this port is still upward if I can replace the firewall prior non-SonicWall serving this LAN, I got the new SonicWall.

  At its connection to the Wan is down, I don't see anything different on the device, so I am at a loss even know what diagnosis of the measures to be taken. Are there specific parameters and/or log files that might be useful to diagnose the problem? Is it possible that there is a problem with SonicOS version am I using? Pourrait - this point to a hardware router problem?

  Finally... an answer. In short, it was a known problem with the Alcatel FIOS in border Ontario here's the recap:

  Business of my client was sitting there in this situation with the border router and a Netgear FVS318 works correctly for perhaps three years. Then one day, we get more sophisticated and need a reliable VPN. So I happily order two SonicWall TZ205 units, which replaces the old Netgear. The SonicWall at the other end (cable internet service) works fine, but to do this, the border gateway refused to communicate with him, after six hours. A restart of SonicWall has solved the problem, but she returned after six hours. When he is down, I can still communicate with the border router that is on the same network with the ONTARIO Frontier and my SonicWall switch. So I know my port WAN on the SonicWall is not the problem.

  I have reset the SonicWall to factory specifications, ask questions on the forum of SonicWall, even to swap this SonicWall with one at the other end. I opened a call at the border. My research points the finger at ARP, but one of the level 1 technicians gives me this message of network technology: "This is not how it works." It was perhaps in hour four of my forty-hour ordeal. I consider allowing the ARP open via the diags hidden from the SonicWall page but reject the possibility because of the stern warning that this is not safe. (Sigh... anyway could have save me several hours).

  No change in this. I dig, dig, dig. I have activate gratuitous ARP. Finally, I discovered, by chance, while tinkering with ARP on the SonicWall, that a cache ARP Flush on my SonicWall solves the problem immediately. Now, how can that be? I ask Frontier. "It is your own router," they say, 'if we do not support. " I ask, "If my monitor package reveals that my router sends packets to the IP address and MAC address of your gateway and your entry door does not, whose fault is that?" They say 'Yours'! "Of course," I think, "and if my router did not meet your entry door, it would also be my fault." But what I'm saying is, 'I have to switch to Comcast to be able to use an advanced router." "It's your choice," said the Tech level 1 (the regional director had no one to happy to hear about it when I finally made an autonomous escalation by calling the line of business of complaint).

  In the meantime, a filtered to ARP packets monitor reveals that when I clear the cache ARP of SonicWall, there is something gratuitous ARP does not: it sends an ARP request explicitly to the IP address of the gateway. And this proves with certainty that it is not only related to ARP, but this is a problem on the side of the border. Yet, I can't speak with an NT. They tell me that their door is not in ONTARIO (which goes far to get rid of the smell of the true cause later).

  This is a site that is half an hour from my office, so Meanwhile, I activated a second NIC on a server at the office, given that the two default gateways and RDP server enabled on both so that I can RDP in via the border at the NIC2 server router, and then connect to the SonicWall via its interface LAN of NIC1 of the server do this without yet another trip into the office.

  At the same time, users in the Office tire repeated outages and ignore my instructions to call me when there is a power outage and unplug, plug back the power of the SonicWall while I'm trying to troubleshoot it. And, of course, it's my fault because I went from routers. So I withdraw my cheap Netis switch, connecting three WAN devices and replace it with Netgear switch a little better (but still not managed).

  In the meantime, however, I now put in more than 30 hours between all the swapping & resetting devices, the many trips in the office and maybe eight or nine calls to Frontier - none that ever made me an escalation to level 2. And all the time, I was insisting that someone there has been the answer already and just needed this person to I can have the five-minute conversation required. That's not to mention buying a for my router SonicWall support contract and a few hours on the phone with the support of SonicWall. And I can't exactly charge my client for all this time, since, according to them, it was my choice to switch routers.

  Then, suddenly and without apparent reason, my monitor package starts list null source ARP requests ever two minutes - explicitly directed against each of the five usable on the WAN subnet IP addresses. And they come from a MAC address address of the gateway in my ARP cache is not. I find the manufacturer of this MAC and see who is Alcatel. It is a time key, but it doesn't mean anything to me at the time. Of course, my SonicWall blocks these and hack attempts. I connect to the border router and put in place a firewall in the journal rule, but don't see anything. I guess that's because their router must not be able to record the ARP packets.

  More important still, however, my connection is more crashes after six hours. She stay up all night for the first time in 10 days. But the fact that things started working and there is no indication that a change had been made gives me no confidence that the problem has been resolved. Finally, I call the corporate number of the border and ask for the line of the complaint. Things happen in action. I get a call back from the regional manager in an hour. We exchange emails; I have him send a detailed explanation of the problem. He promises to get in touch with a network architect.

  But it will take some time, and I'm starting to wonder if it was the change of Netis in WAN Netgear switch that actually corrected it (even if not it is meaningless), so that night I put the rear Netis in place. But, like a dummy, I also disable regular gratuitous ARP and restart my router - so make three changes at once and ensure that I will have no idea who we intervene if things are going to come back down). This morning... it back down again, as before. And again, when I have emptied my ARP cache, I'm up. So I sink into the site at the beginning and move the Netgear switch in place and reactivate gratuitous ARP.

  An hour later, I get a call from one of the level 2 NT who worked on my case (via chat with level 1) early in the process. She says: "I went back to the case and was digging down through the chat logs. As soon as I saw ARP, I knew what the problem was, and I made the required change. "She explained that the Alcatel HAVE an option that should be activated when there are multiple WAN devices. In addition, my client's business is in the only place in the area where Alcatel terminals are still in use. Now at least I have someone who knows something and addressed to me, despite the fact that I was mean enough to buy my own router. None of the level 1 technicians I have met previously could even understand why - much less how - there could be more than one public IP address. One of them had even said, ' now you are chaining your router through ours, right? Nope. And maybe it's time this process 20 now-40 hours.

  Well, I have yet a full explanation why things started working at the same time I started to see the ARP requests from null which are supposed to be the cause of misfortunes, but I guess there is something different about six o'clock - on-demand and what I see now. The tech called me had no explanation why replace the network switch would have broken things.

  But he works right now and come about six hours since the last connection, so I should know shortly. Now I have the promise of a follow up directly from the Frontier network engineer and, above all, Frontier agreed to do without the Alcatel HAVE to an Ontario Calix - with which they have never seen issues ARP.

  And finally, now I know to search for "Alcatel" and "ARP" together on Google - and found all the specific answers that identify the question to the ONTARIO Alcatel in combination with class routers business. Maybe now I can get back to all of my other clients whose projects have been waiting the last week and a half.

  I'm sure that my life expectancy is just down by a couple of years.

• Default gateway when connected to the VPN

  Thanks for reading!

  It is probably a dump so bear with me the question...

  I set up a VPN connection with a Cisco ASA 5505 giving over the internet, with customers behind him (on the same subnet), when environmental connected ot the VPN I can reach the router inside giving me and the other pass behind the router (each switch is connected to the router), but nothing else.

  My beets is that the router is to play with my connection, but nevermind that!, Setup is not complete when even... my question is more related to the bridge I'm missing when I'm outside, is connected to VPN on the ASA, pourrait this BUMBLE? I would not a Standard gateway in the command ipconfig settings in windows?

  That's who it looks like now:

  Anslutningsspecifika-DNS suffix. : VPNOFFICE

  IP-adress...: 10.10.10.1

  Natmask...: 255.255.255.0.

  Standard-gateway...:

  The internal network is:

  172.16.12.0 255.255.255.0

  Here is my config for the SAA, thank you very much!

  ! FlASH PA ROUTING FRAN VISSTE

  ! asa841 - k8.bin

  !

  DRAKENSBERG hostname

  domain default.domain.invalid

  activate the password XXXXXXX

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 172.16.12.4 255.255.255.0

  !

  interface Vlan10

  nameif outside

  security-level 0

  IP 97.XX. XX.20 255.255.255.248

  !

  interface Ethernet0/0

  switchport access vlan 10

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone THATS 1

  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

  DNS server-group DefaultDNS

  domain default.domain.invalid

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  172.16.12.0 IP Access-list extended sheep 255.255.255.0 allow 10.10.10.0 255.255.255.0

  MSS_EXCEEDED_ACL list extended access permitted tcp a whole

  Note to access VPN-SPLIT-TUNNEL VPN TUNNEL from SPLIT list

  standard of TUNNEL VPN-SPLIT-access list permits 172.16.12.0 255.255.255.0

  !

  map-TCP MSS - map

  allow to exceed-mss

  !

  pager lines 24

  Enable logging

  timestamp of the record

  exploitation forest-size of the buffer to 8192

  notifications of recording console

  logging buffered stored notifications

  notifications of logging asdm

  Within 1500 MTU

  Outside 1500 MTU

  mask pool local 10.10.10.1 - 10.10.10.40 VPN IP 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow any inside

  ICMP allow all outside

  ASDM image disk0: / asdm-625 - 53.bin

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 172.16.12.0 255.255.255.0

  Route outside 0.0.0.0 0.0.0.0 97.XX. XX.17 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout, uauth 0:05:00 absolute

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  Enable http server

  http 172.16.12.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 172.16.12.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  internal VPNOFFICE group policy

  VPNOFFICE group policy attributes

  value of server DNS 215.122.145.18

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value TUNNEL VPN-SPLIT

  value by default-field VPNOFFICE

  Split-dns value 215.122.145.18

  no method of MSIE-proxy-proxy

  username password admin privilege 15 XXXXXX

  username privilege XXXXX Daniel password 0

  username Daniel attributes

  VPN-group-policy VPNOFFICE

  type tunnel-group VPNOFFICE remote access

  attributes global-tunnel-group VPNOFFICE

  VPN address pool

  Group Policy - by default-VPNOFFICE

  IPSec-attributes tunnel-group VPNOFFICE

  pre-shared key XXXXXXXXXX

  !

  class-map MSS_EXCEEDED_MAP

  corresponds to the MSS_EXCEEDED_ACL access list

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  inspect the icmp error

  inspect the pptp

  inspect the amp-ipsec

  inspect the icmp

  class MSS_EXCEEDED_MAP

  advanced connection options MSS-map

  !

  global service-policy global_policy

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  Cryptochecksum:aaa1f198bf3fbf223719e7920273dc2e

  : end

  Right if disbaled all traffic will pass tunnel and snack active local internet gateway is used specific traffic wil go to the tunnel.

• VCA Mode affect the Performance?

  I enabled on my AMD based blade Cluster.  Once I did, but I had a few complaints today claiming a general slowness on their desktop from view.

  These are older blades but now run our test environment seen for quite awhile without complaints.  Today, I added a more recent blade but was to turn VCA AMD Opteron Gen 2.

  3 blades are AMD Opteron 8218 and my 4th I've added today's Opteron 8356...

  Pourriez this cause on the virtual machine slow?

  VCA is used to differences of capacity CPU mask and should not affect the performance. http://KB.VMware.com/kb/1005764

• How to change the time of departure for the clips in the properties?

  Hello there ,.
  I have tested the Audition CS5 right now and he find much except for one thing:

  In the properties for each clip, there is a departure time. But it can not simply be edited!

  I can change the start time of the entire session - Yes.

  But not those of individual clips. Only by moving around and is not very accurate.

  Is there a a way to change this from time for clips by typing in numbers?

  Thank you :).

  It seems to me that this feature has been removed...

  Pourrait this really true? !!

  Please help someone.

• Can I get some suggestions for this operating system, should I update to Windows Vista?

  Upgrade the OS from Vista

  I have a HP Pavilion dv6 laptop running Vista 64-bit. I thought to upgrade the operating system. Pourrait group Advisor reviews, etc. Update W7 is basically problem free? What a W7 install from scratch? Thanks to you all!

  Hello

  If you have Vista 64 bit you must upgrade to Windows 7 64 bit.

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  And the Microsoft Store where you can get an idea of the price of Windows 7:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  For any other questions about the installation of Windows 7, please ask in the Forum Installation of Windows 7:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?tab=all

  See you soon.

• Error when you try to start Windows Live Messenger: this application didn't start because the d2d1.dll is not found

  I get this error for windows live messenger when I start msn _ (THIS APPLICATION COULD NOT START BECAUSE it could NOT FIND a d2d1.dll, PLEASE REINSTALL AND perhaps THE PROBLEM will BE SOLVED))

  I HAD A PROBLEM WITH MSN

  1. I DID FORMAT MY PC AND I START FROM THE BEGINNING

  2. I DID ALL THE UPDATES

  3. I INSTALLED WINDOWS LIVE ESSENTIALS 11

  4. ONCE I INSTALLED WINDOWS LIVE ESSENTIALS 11 I BEGINS AND IT WORKS WHEN I REBOOT MY PC AND I START IT AGAIN, I GET AN ERROR SAYING

  (CETTE APPLICATION POURRAIT PAS DÉMARRER parce QUE ne pourrait PAS TROUVER UNE d2d1.dll que s'il vous PLAÎT RÉINSTALLER ET PEUT-ÊTRE LE PROBLÈME SERA RÉSOLU)).

  WHAT IS THE PROBLEM?

  PLEASE LET ME KNOW THAT I DON'T KNOW WHAT ELSE DO

  Not certain how much this will help, but Windows Live questions should be handled by Windows Live Solution Center.
  This is the Windows Live Solution Center Portal:
  http://windowslivehelp.com/

  I hope that you will get a resolution from the experts here.
  One thing... they aren't this quick response to questions. I said that my personal experience. So, be patient. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• This is the message I get this morning cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

  need help this is the message that I have this morning cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.

  Hi amyturnkey,

  What operating system do you use? (Windows / Mac?) What version number?)

  This thread pourrait be useful: error starting InDesign CC: '... ". lack of sufficient permissions to access the folders preferences'

  Kind regards
  Maurice

• When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  This happens even with pictures taken on another device, not just mine.  My daughter told me that the phone fell recently.  The yellow streak isn't nowhere elsewhere on the laptop, right on the photos in LR.

  It happens when you import new images. This pourrait indicate that the sector where the pictures are copied to is damaged. But it could be a faulty card reader or a bad cable if you connect the camera directly to the computer. It's a hardware problem. Your challenge is to figure out where this problem.

• I can't attach text to path but this that any vector?

  I created an image similar to alien points of halftone splat into a vector in a long line. now, I want to bend it around a circle.
  
  Im not using the alien splat filter because it is for the flash and I want that all vectors!
  
  Edit: I tried the tool remodel. I need something more specific. He needs to type about half of a perfect circle!

  I do not want to state the obvious here, but have you tried using text
  Create your circles? Diaphragm openings, zero or 'o' in a font suitable for one
  the appropriate size, would achieve a similar effect, no?

  Peter
  _________________________
  "ToffeeCrisp" wrote in message
  News:fbpctf$1fl$1@forums. Macromedia.com...
  | the image I created consists of many small vector circles not
  joining
  | to each other. If the pen tool is only good for bend each individual
  circle.
  |
  | I've alterd the path from all backgrounds to union them, I thought that it
  pourrait
  | be a way to fix the path as text. If there is no way to do this
  then it
  | would be a good option for that in the next version!
  |
  | Ive also tried drawing it around the circle, but found it too hard and
  time
  | consume!
  |

• What this means: WHERE NOT EXISTS

  Hello!
  
  Pourraient some please explain me what the following statement? It's the 'where' - article I'm not sure how works.
  
  BTW, the statement gives a cost explain plan 674 000 due to sweep of table on the 512 MB and 6 645 059 lines xxs_entries of the table.
  
  Is it possible to rewrite this query?
  
  DELETE FROM xxs_entries
  WHERE DOES NOT EXIST)
  SELECT *.
  OF ledger_entries
  WHERE xxs_entries.entry_id =
  ledger_entries.entry_id);
  
  Thanks in advance for you help!
  

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.