Bike G - LED continues to Flash

Similar Questions

• Cable connector HP Elite 8000 USDT network continues to Flash

  My small Elite 8000 Ultra computer has a glitch.

  The connector of the network cable continues to Flash, even when the computer is shut down.

  Any cure?

  Hans

  Definitely.

  Just unplug the CAT5 cable.

  This can be done if the PC is on or off.

  The flashing led immediately stop and turns off.

• Stor.E USB HDD PX1399E - 2 20 - light continues to flash red / blue

  Stor E usb hdd, no access that passes light continues to flash red/blue, which means?
  (constant alternating red/blue 2 x / sec., and not not not flashing as read/write)

  * RESOLVED: * already tried several cables, also with dual usb (Y-cable).
  the solution was a cable with an interferencefilter close to the HARD drive.

  Post edited by: borel

  > RESOLVED: already tried several cables, also with dual usb (Y-cable).
  > solution was a cable with an interferencefilter close to the HARD drive.

  Thanks for your comments!

• To cancel light continues to Flash for the last 2 days on my HP 6500 all on the printer.

  Light to cancel on my HP Office jet 6500 all-in-One Printer E709 help a series continues to Flash for the past 2 days, I changed the thinking of the ink that was the problem, but he did not. I unplugged all caps for about two minutes, then the replugged and nothing helped.  I was doing a copy 2 days ago and the paper stuck, I was able to recover all of the sheet, but since then I'm unable to use the printer.  I can't make copies; I can not print nor can I fax this printer.  What can I do?

  Bob_Headrick thanks for the info but I got intouch with the HP company directly, it seems to be a hardware problem.  They no longer support this printer, but gave a good discounted price for a newer version, I'm happy with.

• SPA-2100 continues to Flash.

  Hi all

  After receiving the SPA-2100, I have a problem with it. SPA-2100 more return as ATA.

  He seems to be in this stadium and never comes out:

  Slow flashing (0.5 sec ON, continues to 0.5 s OFF)
  

  • Initialization of the system; only occurs at the start of the SPA-maximum, time could be as long as 10 seconds (hardware reboot) to two seconds (warm start).
  • Firmware for download.
  • Looking for a DHCP.

  Other symptoms are:

  (1) the yellow and green lights (lights status, line1, line2, Wan and Wan) anti-terrorism Act keeps blinking once power is connected (with no other cable is connected). I tried to unplug and "the rest" of the anti-terrorism Act and then reconnect the power supply but the yellow and green status lights never "stabilizes" and will continue to Flash intermittently.
  (2) for the ATA WAN is connected directly to my router Lan port and ATA PC port connected to my laptop it reports that the cycles there after disconnected and network connection for limited available ("connection to the LAN - a network cable is unplugged") on the same cycle as the yellow of the ATA and the green light of connectivity LAN of the modem and the status indicators indicate.
  (4) listen to the connected analog phone you can't hear any sound feedback through the earpiece. Also no command doesn't seem to work. (*, etc.)

  I hope that this device is still noticeable feasible.

  Thank you

  Matt,

  I hate to say this man, but it seems (after view it) as if this device is toast. Where do you have, how long have you had, did you contact the HWC (866-606-1866) to support this topic, and when did this start happening? If you obtained it from a VoIP provider, then you must contact them for a new unit. If the unit was purchased by you, you can provide the serial number for the center of assistance to small businesses for a possible rma. If you have had more time that the hardware warranty is, then you will need to buy another camera. The link on each ethernet port lights should not be on unless there is an active connection at the other end. It seems that the unit is locked in its ' cycle (POST) start and won't boot. Good luck.

  Bill

• Smartphones blackBerry blackberry bold 9780 caanot switch and LED light keep flashing and cannot connect to my PC as well

  I tried to connect to the desktop of my PC software, but it can not connect it. So what I do I plug my BB remove the battery and plug in the back, but still the flashing to keep but not turn on and keep restarting. When I connect my BB to desktop software it ask me to update so it I try again several times. so, I put to date but still nothing happen. Please advice me what should I do with this problem.

  Hi asyikin_azis,

  Try this:
  1. connect your blackberry to the computer using the usb cable. If Desktop Manager opens automatically, then close it because it will not be able to detect your bb at the moment.
  2. open apploader.exe "C:\program files\common research in motion\apploader\apploader.exe.

  3 Apploader window will open, and then click next two times, and your blackberry LED will stop flashing and then start to boot normally.

  Click 'Like' If you want thank you and mark as solution if your problem solved so others can find it as a solution for them

• HDD LED continuously flashes after the Installation of RAM in P70 - no boot upward

  Hello

  I had a Thinkpad P70 since February and it works fine. It has 16 GB of RAM (Non - ECC) (2 x 8 GB). I got two 8 GB 2133 DDR4 Hynix RAM SODIMM, thinking I could switch to 32 GB total.

  I installed both modules of Hynix in the brackets of two memory under the laptop.

  When I turn the P70, it does not start. The HARD Drive LED flashes continuously. When I remove the memory modules, the machine starts.

  The memory is compatible with processors SkyLake.

  Means that it is incompatible with the P70?

  Thank you.

  Here's an update. I put the RAM in the two memory modules. Power on the computer and waited longer. The led flashed away for about a minute then stopped. Then the P70 booted up successfully with 32 GB of RAM now installed.

  This can help others - looks like I have did not wait long enough when I originally installed the two memory sticks.

• Satellite L455 - plug-and - battery LEDs power LED and it flashes orange

  I have a Satellite L455, which worked perfectly for more than six months now, but two weeks ago he began to behave strangely.

  I turned off the machine normally in the evening I was going to sleep. In the morning when I turned on it it turned on, HARD drive and on power LED blinked blue for a few seconds then they are gone. Machine does not start. I tried to turn it on again and it does the same thing. Then I saw the "power plug on" and "battery on" LED flashes orange at the same time. I unplugged the power adapter. Both lights were continuous blinking but machine will not feed. I removed the battery for a piece of 5 minutes, then reinserted it and the machine has worked all day.

  I went he deleted off the power plug and the morning again it wouldn't start until the when I removed the battery for a few minutes then it works again. The battery recharges very well that when I remove and reinsert it even without connecting the power cable still lights up and works perfectly.

  Then, I removed the battery and the power supply Plug and you press the power button for 30 seconds to unload the machine and then return power and battery and it worked until I turned off again and shutting off the power and then it didn't once again.

  If I stop just of machine and do not turn off the power cord, then I can turn it back on to and work with the machine without hassle even for three days without interruption.

  What could be wrong? Any help will be really appreciated.

  Concerning
  Yusuf

  Hi chidzungo,

  It must certainly be a hardware malfunction but he s strange why it pops up every day after you have closed the laptop. Do you use batteries and AC/DC to original Toshiba adapter? Have you connected external devices to your laptop? If so delete them before you turn on your laptop.

  What version of BIOS is installed at the moment? You should look on the Web from Toshiba website for an update. Update of the BIOS might also help and it s worth a try.

  Before you start reading the BIOS BIOS update instructions update [HERE: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=60]

  Satellite L455 seems to be an American model, so the BIOS update can be downloaded from the Toshiba U.S. page but first check the exact part number:
  http://www.CSD.Toshiba.com/

• Satellite A500 - 14 k - HARD Drive LED indicator always flashes

  Hello

  First sorry for my bad English

  I'm french and I recently bought a Toshiba Satellite A500 - 14 k (http://fr.computers.toshiba-europe.com/innovation/product/Satellite-A500-14K/1072806)

  I have a little problem with this laptop and I don't know if anyone has a solution

  The HARD drive light flashes constantly (1 blinking per second) even in safe mode. I checked some forums and I learned he had something to do with the function of autorun cd /dvd CD/DVD recorder.

  If the autorun feature is disabled in the windows registry (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi ces\CDRom and the key value goes from 1 to 0) the flashing disappears, but I can't access my data from CD or DVD (media are marked as empty). However, the audio CD and video DVD work except that they cannot be started automatically.

  The same thing happens if the CD/DVD writer is disabled in the control panel Device Manager: the led indicator has a normal activity.

  I would like if this problem occurs with other owners of this product and if there is a solution to use normally without this flash recorder

  Thank you

  I don't have A500 but A300 and I can't say with certainty why this and what kind of HARD drive activity is ongoing, but what you can try is to remove some pre-installed Toshiba stuff like TEMPRO or pre-installed application antivir.

  When the laptop is new days that many updates will be installed and in the background is always a certain activity. Automatic update is disabled?
  Try also to remove TEMPRO. This tool is active permanent and search for updates.
  Try to optimize the operating system preinstalled and carefully monitor if something will change. I always do after clean operating system installation.

• The Start button / stop continues to Flash / pulse?

  HP Deskjet 4160.

  I just upgraded to Explorer 9

  Hi gpmroy,

  A power indicator light is flashing on the printer indicates generally prepare a print job. The power light flashes while the product receives the data.

  Have you tried to print from another browser like Chrome or Firefox? If you are able to print from another browser, I recommend downgrading to Internet Explorer 9 to 8 (or just continue to use another browser).

  I would like to know if this helps or not.

• My air led is orange flashing

  MY air game is orange flashing instead of stay green. What is the problem

  Wifi hotspot: understand and resolve a blinking amber status light - Apple Support

• Firefox continues to Flash

  on my laptop at home and on my laptop. .. It keeps flashing... does not. .. makes it difficult to type. Please give suggestions ASAP
  Thank you

  For desktop PC (laptop)

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• It continues to Flash in the connection tab... it shows briefly then nothing. It will not go or do anything, please help

  I try to open firefox, and briefly, it shows the home page then turns off. the tab flashes just to connect tab for new tab above and more. It takes forever to not even down to the bottom of the help, tools, etc. I 16.0.1 it was working fine 2 days ago... but yesterday it just stopped.
  I was wondering if I can not fix & need to reinstall... all my info would be lost... all my sites & bookmarks... or is there a way to keep?

  i have windows 7 & use microsoft essentials.. did something update & change my settings?
  

  Help, please... I love firefox... I am now on IE9...

  Ok.. I found the way to boot into SafeMode... and it worked... THANK YOU VERY MUCH SO.

• Pavilion 17: PC is not off - led continues to burn

  As ive installed Windows 10 and I turned off, windows closes and the processor, but hd turning point guard and led keep activity stops burn them.

  Every time that same error-log:

  System:

  (1) error "Service control manager".

  Synchroniseren_Session1 service host is onverwacht gestopt. Said is 1 keer gebeurd. Of pages next herstelbewerking zal on 10000 milliseconden worden uitgevoerd: Service opnieuw starten.

  2) 3 seconds later error "Distributed Com".

  Server has zich niet binnen vereiste termijn DCOM geregistreerd bij CortanaUI.AppXd4tad4d57t4wtdbnnmb8v2xtzym8c1n8.mca.

  Programs:

  Error "Apps".

  Het activeren van app Microsoft.Windows.Cortana_cw5n1h2txyewy! CortanaUI is mislukt door of laughing at app is gestart niet... Kijk in het logboek operational/Microsoft-Windows-TWinUI voor aanvullende information.

  Tried all the updates from HP and Microsoft (including the BIOS), nothing works

  Any help please?

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  • Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model.  Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down.  Find the download in the category 'Driver-Chipset'  If a pilot of MEI with a version from 9 or 10 number is listed, download.  [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  • If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the driver appropriate directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine).  [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  • In Control Panel, select administrative tools, and open Services.
  • Go to Windows Update and double-click it to view its properties.
  • Click on stop to stop the service to run.
  • Change the Startup Type to manual, and then click OK.
  4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  6. Change back the setting of Windows Update Services to manual automatic (delayed start).
  7. Restart your computer.
  8. Rejoice!  You can finally sleep and stop again.

  -DanG

• Lock shift continues to Flash

  Hello

  I was using my laptop very normally like everyday, and this strange thing began to happen the light from my computer (HP PAVALLION SLEEKBOOK 15) laptop started to blink all of a sudden. The laptop works very well and there are no issues yet this starnge flashing. Should I worry about this?

  Hi SukhwinderHP
  
  Try a hard reset first.
  To perform a hard reset, use the following steps:
  Remove the computer from the docking station or port replicator.
  Disconnect all external devices connected: displays of devices USB, printers, external storage, etc..
  Unplug the laptop AC adapter.
  Remove the battery from the compartment to batteries.
  Press and hold the power button for about 15 seconds, remove any residual electric charge capacitors that protect memory.
  Insert the battery and plug it back the power adapter on the laptop; but do not connect peripheral devices.
  Press the power button to turn on the computer.
  
  Check if it has not changed.
  
  If so,.
  
  Do a contest of F2 of the System Diagnostics hard drive test in BIOS (shortly after the power on laptop computer, press ESC or F2 to enter the BIOS/DIAGNOSTICS)
  
  Also check if the problem is present on connect only to an AC adapter / CC batteries removed and turned on.
  
  Check that all connections are correctly placed.
  
  Reinstall the memory modules or Exchange if your have 2 sticks of memory completely off the laptop (press the SHIFT KEY, and THEN click SHUTDOWN) and perform a hard reset before opening rear cover. electrostatic precautions.
  
  I hope this helps to solve the problem,
  
  Please click ON 'ACCEPT AS SOLUTION' TO HELP OTHERS WITH THE SAME PROBLEM *.
  
  CLICK ON BRAVO IF YOU LIKE MY ANSWER *.