Smooth the edge of a selection, updated the

Similar Questions

• There is NO selection update software on my phone! How are Iphone 3 # IOS updated? It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  There is NO selection update software on my phone! How are Iphone 3 # IOS updated?

  It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  The model number you have listed is an iPhone 4, which can be upgraded to iOS 7.1.2. To have the option to update software on the phone, you need at least iOS 5, otherwise you will need to use iTunes on your computer sync to perform the upgrade.

• Impossible to install the selected updates. Windows 7... DON'T want Windows 10

  I have Windows 7 on my laptop (which is 5 years, cannot afford a new).

  I don't want Windows 10... But it does not close on the upgrade and it's affecting my updates. I'm going to "Updates" and it says "upgrade to Windows 10" then the "Get started" button in the right corner. "

  But what is frustrating so it won't let me update the selected updates.

  Until Windows Update would tell me "an important update" and or "optional" update Then I would choose which clicking on the box. Well now, I go to updates and the stupid thing of 10 window, then "other updates show." I click on it and choose my updates and click on 'OK '.

  That's the frustrating part. When I come back there is nothing that says... as it used to... "Install updates". I've tried everything. If the updates, I chose are just sitting there.

  Today is May 13, 2016 and yesterday (12) when laptop computer closing it are there upgrades then... But... when I went to see if the updates, I chose were installed were not. On the contrary, he says this (I have updates in bold):

  'Select the updates you want to install' (once again, I've done)

  Upgrade to Windows Home version 1511 10, 10586

  Update for Windows 7 for x 64-based systems (KB3140245)

  Download size: 627 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Install this update to resolve problems in Windows. For a complete list of issues included in this update, see the Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/3140245

  Help and Support:
  http://support.Microsoft.com

  I do community then what to do? And still now I don't want to upgrade to 10... I have my reasons.

  Everything you need is here to do everything for you

  GWX Panel

  http://blog.ultimateoutsider.com/2015/08/using-GWX-stopper-to-permanently-remove.html

  The download is on this link

  http://ultimateoutsider.com/downloads/

  

• Statement of "SELECT UPDATES" of the audit

  Hi all
  
  My database is 10.2.0.3 and I activated audit_trail DB value already.
  
  My goal I want to audit statement "SELECT UPDATES" on the table and tried to activate "SELECT" audit on the table that has the number of records in dba_audit_trail, because the "SELECT statement" that include in this review and then I tried to activate "TABLE of LOCKING" of the audit on the table that does not dba_audit_trail n records.
  
  So my question is how to enable auditing of collecting only the instruction "Select updates"? or someone has an idea for this.
  
  Kind regards
  Hiko

  I don't think that it is possible to SELECT UPDATES verification without verification of all SELECT statements.

  What is the problem you are trying to solve in auditing SELECT for UPDATE statements? If you try to solve a problem of line lock contention, for example, you would be better served by looking at the data of ASHES (assuming that the appropriate licenses) to get information on what sessions were blocking other sessions over time.

  If you really want to just audit records to SELECT for UPDATE statements, you may audit all selects them and then run a job that regularly purged audit records that were not SELECT them for updates. Or, assuming you are using FGA, you could get the current SQL from the USERENV context and analyze in the search of the FOR UPDATE clause before writing the audit record in your audit table.

  Justin

• How to smooth the edges of a layer in Illustrator?

  Well, I don't know exactly how to phrase my question, but I'll do my best.

  Basically I have a drawing that was done in Photoshop and now I need to enlarge it. However, of course sometimes pixelated. So I want to put it in Illustrator and make smoother edges (is essentially four colors which do not mix, so each color is separated).

  Is it a fairly easy way to do this? I say to myself that I could either smooth the edges or become a vector. I know Photoshop and InDesign, but I haven't used Illustrator at all, so I have no idea how to do that.

  Sorry if I wasn't clear on something, please let me know. Thank you very much!

  You can also make a way to access/paths of your layer/selection in Photoshop and copy to Illie.

  It will be probably more accurate that way if you handle it right.

  Once you have pasted a path in Illie it becomes an 'object' (Illiespeak) on a layer. Illie layers can contain several objects.

  Now, all you have to do is color him (years color palettes samples).

• Remove or delete an update of "select updates to install.

  I had an answer about the failure of automatic loading of an update to select updates to install.  I finished the instructions and the update was successful.  However, the update is still listed in select updates to install and continues to install and fail.  How can I remove this update to select updates to install. There is no option to delete or remove it.  The index update is "Updated for the management of rights for Windows Vista (KB979099) Client".

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• How to build a page using combo of Muse and edge to animate that updates the tables and charts of data from the Web site as Google Analytics tracking data?

  Is it possible to build a statistics page of back-end bit as a catalyst for business where information is collected in real time and updates of maps or charts which I can build in edge animate?  I want data analytics google for updating a cat that shows the clicks of visitors/page etc, but I want to design my own user interface for this.

  I know some coding etc may be involved, but can someone point me in the right direction?  Is this possible with edge animate?

  

  Edge will be animated plays the associated file for real time function, you can look for other solutions spare or better is to contact some experienced web developer who can build these tools for you.

  Thank you

  Sanjit

• SELECT, update, SELECT the problem

  Hello world
  
  I am very new to working with Oracle with .net and I am a bit confused by something, so I hope someone can help me...
  The situation is that I have 3 commands. The first selects a row in a table ("SELECT field1, Field2 FROM table1 WHERE Field1 is 1'), then Field2 = 'foo '. The second command updates the same line in this table ('UPDATE table1 SET Field2 = 'bar' WHERE field1 = 1'), then the third makes a selection re (('SELECT champ1, champ2 FROM table1 WHERE champ1 = 1').) The problem I have is that the third command bring me the same results that firstly, unchanged - even if I see this line in the database and I KNOW He is changed, and the second command worked. Field2 = always "foo"... If I refresh and refresh a couple of times, data is changed later.
  
  Here is a code...
  
  DataTable Table = new DataTable();
  OracleConnection conn = new OracleConnection ("User Id = database; Password = password; Data Source =');
  Conn. Open();
  OracleDataAdapter adapter = new OracleDataAdapter ("SELECT field1, Field2 FROM TABLE1 WHERE FIELD1 = 1, conn);
  Set DataSet = new DataSet();
  adapter. Fill (Set);
  Table = all. Tables [0];
  
  It's all right, I get what I expect, IE: Field2 = 'FOO '...
  So now, I am doing this...
  
  OracleParameter Field2Param = new OracleParameter ("Field2", OracleDbType.Char, 64, "BAR", ParameterDirection.Input);
  
  OracleConnection conn = new OracleConnection ("User Id = database; Password = password; Data Source =');
  Conn. Open();
  
  OracleCommand cmd = new OracleCommand (insertstr, conn);
  
  OracleTransaction txn is conn. BeginTransaction (IsolationLevel.ReadCommitted);
  
  cmd. Parameters.Add (Field2Param);
  
  cmd ExecuteNonQuery());
  
  .. .This works also, depending on the point of view of database.
  
  So I update in the same way as before...
  
  DataTable Table = new DataTable();
  OracleConnection conn = new OracleConnection ("User Id = database; Password = password; Data Source =');
  Conn. Open();
  OracleDataAdapter adapter = new OracleDataAdapter ("SELECT field1, Field2 FROM TABLE1 WHERE FIELD1 = 1, conn);
  Set DataSet = new DataSet();
  adapter. Fill (Set);
  Table = all. Tables [0];
  
  .. .but I still get Field2 as 'FOO '...
  
  Help, please...

  Hello

  Complete code would help here, because I can't tell where you are finishing the explicit transaction and data validation. Can you reproduce the complaint if you all back to back sequentially in a console application standalone with all the code inside the HAND, for example?

  Here is my proposal, if: call you con. Open several times, so the second or 3rd con. Open call receives a different connection of the pool, rather than you use only and did not commit the transaction again so that it is visible to other connections.

  Also, if your db is RAC, it is also delay spread of validation that can prevent the data to be visible in the other nodes, if your code is running in a tight loop and you are connected to another node.

  It will be useful,
  Greg

  Published by: gdarling on June 27, 2011 11:25

• No sign of edge BT-BT/stack updates installation error, missing the driver

  I can't understand what is the case. I've been update and upgrade to Vista SP2 and I don't know what do to get Bluetooth working again.

  The driver is missing
  I can't find anything THAT BT oriented in programs and features

  I tried a battery of BT available toshiba.com installation but it won't install because BT is not found on the computer.

  Can you please help.

  I appreciate it.

  Jaye

  Bluetooth didn't work before the update?
  If this is not the case, check if the Bluetooth is really inside your laptop.
  A silver bluetooth sticker must be at the bottom of your laptop.

• Try buying LR6 updated, select update and current product, select Add to cart, go to the basket page and it is empty :(

  I can't buy the update

  UPDATE seems that it works with IE, chrome, but even with IE, it takes a lot of time to fill the screen with the news, even when you check out.

  Java script is the worst.  Something as simple as a check out the basket and can't do things.

  Products

  If it's the link that fails for you, remove the cookies from the adobe.com site and try again or contact adobe support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• How to smooth edge of a selection using quick selection and refine edge?

  Im trying to get used to the use of quick selection and the edges of refine it to hide objects in my photos.

  It works pretty well, but I'm still having problems in some places if a curve at the edge of being smooth.

  How do you get the function refine edge to allow you to modify its edge so you can have a perfectly smooth edge?

  Ive tried to use the RADIUS tool refine and it just not smooth it completely.

  What else can I try?

  

  You don't you smooth it unless you have a HQ photo.  The pixels are discrete blocks the greater resolution and more pixels.  While you try to refine the edge you can as well that will allow the image.

  Watch this video of masking and refine the edge.  http://TV.Adobe.com/watch/the-Russell-Brown-show/masking-basics-in-Photoshop-CS5/

• Smoothing the rough lines? (Details in the post)

  Hi all. Thanks in advance I spill the details.

  I hand draw my art. After the scan it, I use the trace function in Illustrator with a value of 2 usually, blur then pull upward in Photoshop to touch up the lines.

  My dilemma is: how to smooth out the lines in my designs? What I did with SOME success is from the return PSD file in Illustrator, make some blur again, then back to Psalm

  In addition, I have attached a sample of a scanned drawing. If you guys/girls have a better and more simple way to smooth out the lines, I'm all ears.

  Thank you!

  Howdy.

  Beautiful technique, Noel.

  Chewingcow: I don't know what you want to do with your image. If you need a line made without much editable, technical Christmas looks great. But if you want maximum editability, jump to Ps and learn to do it in Illustrator. If you check the forums Adobe Illustrator, the limitations of automatic Trace are a frequent topic. If the results you get need a trip to the Ps to get cleaned up, you might reconsider using Auto Trace. The big dogs world Illy always recommend to avoid Auto Trace and recommend instead followed by hand, using the pen tool. More you do it, you get faster. Of course, Illy has simple tools to create the geometric pieces.

  I know not how much you know about Illy, but in the time it takes to move back from Illy to Ps, you could probably recreate it from scratch in Illustrator. And have a fully editable and extremely scalable vector image.

  I made tracing below using the pen, with the exception of a circle tool, which I did with the Oval tool. It took only a few minutes.

  

  I kept going, and 20 minutes later, the drawing is converted to outlines. Twenty minutes is not a long time your art to speak. Especially when you consider where this 20 minutes gets you. From there, the rest is gravy.

  

  The foregoing has a stroke applied to paths. But if you want it to look more hand drawn, you can apply a brush instead of a stroke. There are tons of brushes in Illy, and it's easy to create your own. You can apply a brush that makes lines look smooth or rough. With a single mouse click, the image above looks like the image below. It seems tougher than the original. You can make it look like it was drawn with a pencil or a pen of calligraphy if you want.

  

  Or you can apply the color. Mouse over just a few clicks. One of the bazillion of opportunities.

  

  It is well worth your while to vectorize your art in Illustrator. It allows the same artwork as anything a business card for a T-shirt to a wrap of the car at a billboard of output. PS, not so much. There is a reason that illustrator is called Illustrator and Photoshop called Photoshop.

  But, if you really want to use Ps (this is the Ps forum, after all), I used to scan stuff hand drawn in Ps all the time. But I've rarely analysed in full compositions as in your example. I scanned in pieces and assembled with other art created in PS. My process is quite simple.

  I used the quick selection tool to select the Africa.

  

  Then, using the palette traced, I converted the selection to a vector using the command create a track work with tolerance set to 1.5. I usually put it entre.8 and 2, depends on the resolution of the image and a contrast. Fill and stroke have been applied. The form is not quite perfect (image of low resolution, blurry drawing are less accurate quick selection tool. The sharper your drawing, the better it works.), but it can be changed by using the vector tools in PS. I add Madagascar to the layer of Africa and organize other forms in appropriate laters. Build the image in this way, you get maximum editability. Not as good as Illustrator, but I made this way for years before I'm Illy.

  For what it's worth.

  Peace,

  Lee

• How to smooth the image zoom/scroll jerks (CS4)?

  Hi guys/girls,

  Is it possible that I can smooth out images that zoom in/out with normal classic Tween. they are so nervous, it looks terrible. I even kind of appeasement and frames per second set at 30.

  Info much appreciated!

  Jeff

  In the library, right-click on the image and select Properties.  In the interface that appears, select allow smoothing.

• Is there a way to smooth the zooms and pans which are not consistent throughout?

  Shot some footage using a digital SLR camera and a tripod grip of squeeze, images is good except the zooms and pans are not too smooth

  how I wish that they. Anyway to fix this?

  Reshoot cos it's hard impossible.

• XP Internet vidio run start stop smoothly the Rafale in short reading.

  Vidio XP Internet do not work correctly when you click on vidio execution pauses and starts, stops and starts its really slow?

  Looks like it is buffering. Either wait a few minutes until you press play, download the video to your hard drive and then watch, make sure you go to your internet connection at full capacity, so try to use maybe a wired network instead of wireless, I sometimes look less people will use internet or upgrade to a better download speed of your internet provider.