SMS in Lookout 6.5 object
I am trying to send SMS using the new SMS Lookout 6.5 object and it does not work.
Can anyone send me an example of configuration of SMS object that works?
I even followed a serial between PC and modem and there is a strange standing Lookout sending to the modem.
Help, please
Ivan K.
Problem solved.
I entered the starting number by + and departure must be 00.
Tags: NI Software
Similar Questions
-
Belvedere's going to write anything that is connected to its outputs FieldPoint. It is expected - at least from the point of view of Lookout behavior.
You can, however, avoid this in two ways:
1. create a process of 'Initializing' Lookout. And this as your startup process. In this fictitious process, don't include any FieldPoint object; but can include other initialization functions, you may want to. So, you would first launch this dummy and this dummy process, each time that you process / system is ready, start the actual process (which has the FieldPoint object). In this way, you control exactly Lookout to connect and write to the FieldPoint.
2. Another option is to not let the FieldPoint object survey until you are ready. This can be done by using a Timer Pulse object for the datamember of survey (instead of a constant time) and use a Switch (or something similar) in the subject of timer to decide when pulse start pulse. BUT I remember there was a way to issue back where Lookout wonder all objects of pilot in a process at the start of the process - even if it has been set to interview immediately.
3. Finally, you can configure the object exits FieldPoint match your start parameters. Don't know exactly how do you that - maybe switches related to the outputs in e condition that you want, and then save the file to process. This generates the file state (LST) that would keep these States, the next time the process is launched. But, if you change these States when using and close the process. These final statements will be saved in the report file.
I hope that the above gives you some ideas.
Kind regards
-Khalid
-
Lookout 6.1 Modbus.cbx object - is 03/03/07 latest version?
One of my clients is upgraded to 5.1 to 6.1 Lookout. We become 'too short response' errors on the statistics screen of Modbus. The old system 5.1 Lookout has no errors, using Modbus.cbx as of 16/05/03. Both versions have the gap set Serial Port of reception for 1000 bytes eliminate errors "Message scrambled."
I would like to have the latest version of the object Modbus.cbx for Lookout 5.1 and 6.1.
Thank you.
-
On carriage 4.5 Lookout 6 source file
I use Integrator lookout 6.0 to write my programs of Belvedere, I have a couple of customers with Lookout 4.5, usually make changes to their files of process on the site, but one of my clients had a lot of changes need to be made, so I made a copy of it and brought to the shop where I have compiled it is source file in my 6 Lookout Integrator software. Then I saved the files, has brought to the site and tried to recompile, but he is back with a few errors and does not compile. Is that what I can do to get their program to accept version 6 compile? I wouldn't have to redo all my work on site using 4.5. It is unlikely that I can talk to my client in the upgrade at this time of the year.
Thank you
Werner
Lookout does not support such use. You cannot compile the source 6.0 lookout Lookout 4.5 file.
Instead of all over again, you can try to manually change the source file (.lks).
First, make a copy of the source file.
Open it in a text editor, such as Notepad. The first lines of serval codes are different. You need to copy headers from 4.5 to 6.0 file source file source.
If this does not work after changing the source file header, follow the error in compiling to go to the exact problem codes. The error should tell you the line number. It is usually due to the number of parameters of an object incompatibility.
I can give you instructions to fix the step by step, because there is a lot of changes.
Be sure to save the source before you edit.
-
RUN the object that will not start Windows on-screen keyboard
I use Lookout 6.5 on Windows 7 Professional. I use a button to fire a sequencer whose output starts a RUN object with a command line of the 'c:\Windows\system32\osk.exe '. Executes the RUN object, but I get a window that says "could not start on-screen keyboard. The window has only 'OK' as an option - click on OK and the window disappears. I tried the same object RUN notepad.exe with wordpad.exe, and they work very well.
Anyone see what I'm missing?
Thanks for your reply, Ryan.
I have now found a solution – but first a few puzzles. I can use the Lookout RUN object successfully to start other executable files in the Windows\system32 folder - but not the osk. I can start the osk in other ways (shortcut, double-clicking the .exe from a .bat file).
I copied the osk.exe to another folder on the hard drive and can now begin with the Lookout RUN object. I don't know why this works differently - but it does. Thank you.
-
textEntry object - visible data member does not
Hi people,
I work at lookout 6.6 with a project developed at lookout 6.1.
I was very happy to discover that the textEntry object has had an upgrade in the 6.6 and the added visible data member.
I have introduced the necessary logical expressions on the data member, but the visible member of the does'n is not working properly: if its value is false, the textEntry object is not visible on the Panel, but that's all by allowing the entry (this on the textEntry object converted from 6.1 to 6.6).
I create a new project of 6.6 with a textEntry object, but the problem is still present.
I think that we are looking for a little bug.
Goodbye, have a good time
Sorry, it looks like a bug.
-
Root/CIMV2, MSFT_NetInvalidDriverDependency, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
I tried to rebuild WMI, but always with 30 errors
30469 16:21:35 (0) * WMIDiag v2.1 began Monday, July 9, 2012 at 4:15.
30470 16:21:35 (0) *.
30471 16:21:35 (0) * copyright (c) Microsoft Corporation. All rights reserved - July 2007.
30472 16:21:35 (0) *.
30473 16:21:35 (0) * this script is not supported under a Microsoft standard support program or service.
30474 16:21:35 (0) * the script is provided AS IS, without warranty of any kind. Microsoft disclaims any
30475 16:21:35 (0) * implied warranties, including, without limitation, implied guarantees of marketability
30476 16:21:35 (0) * or adequacy has a particular use. The entire risk arising out of use or performance
30477 16:21:35 (0) * scripts and documentation remains with you. In any case, Microsoft, its authors,.
30478 16:21:35 (0) * or anyone involved in the creation, production or delivery of the script is responsible for
30479 16:21:35 (0) * damage whatsoever (including, without limitation, damages for loss of business profits,
30480 16:21:35 (0) * business interruption, loss of business information or any other pecuniary loss) arising out of
30481 16:21:35 (0) * the use or inability to use the script or documentation, even if Microsoft has been advised
30482 16:21:35 (0) * of the possibility of such damages.
30483 16:21:35 (0) *.
30484 16:21:35 (0) *.
30485 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30486 16:21:35 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
30487 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30488 16:21:35 (0) *.
30489 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30490 16:21:35 (0) * Windows Server 2008 R2 - Service pack 1 - user 64-bit (7601) - "MGATE\ECIADMIN" on the computer "BES".
30491 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30492 16:21:35 (0) ** INFO: Environment: .................................................................................................. 1 ARTICLE (S)!
30493 16:21:35 (0) * INFO:-online 4 shutdown (s) incorrect possible detected on:
30494 16:21:35 (0) *-stop on January 19, 2012 23:30:23 (GMT-0).
30495 16:21:35 (0) *-stop on January 19, 2012 23:50:41 (GMT-0).
30496 16:21:35 (0) *-stop on February 9, 2012 15:37:35 (GMT-0).
30497 16:21:35 (0) *-stop on July 7, 2012 00:58:51 (GMT-0).
30498 16:21:35 (0) *.
30499 16:21:35 (0) ** System drive: ....................................................................................................... C: (Disk Partition #0 #1).
30500 16:21:35 (0) ** Drive type: ......................................................................................................... SCSI (virtual disk VMware SCSI Disk Device).
30501 16:21:35 (0) * there is no missing file of WMI system:... Ok.
30502 16:21:35 (0) * there is no missing WMI repository files:... Ok.
30503 16:21:35 (0) * WMI repository state:... MORE LOGIC.
30504 16:21:35 (0) * AFTER you run WMIDiag:
30505 16:21:35 (0) * repository WMI has a size of:... 19 MB.
30506 16:21:35 (0) *-free space on the "C:" drive:... 22250 MB.
30507 16:21:35 (0) *-INDEX. BTR, 4349952 bytes, 09/07/2012 16:16:50
30508 16:21:35 (0) *-MAPPING1. CARD, 51804 bytes, 07/09/2012-16:16:50
30509 16:21:35 (0) *-MAPPING2. CARD, 51804 bytes, 07/09/2012-14:23:20
30510 16:21:35 (0) *-OBJECTS. DATA, 15515648 bytes, 09/07/2012 16:16:50
30511 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30512 16:21:35 (2)! WARNING: Windows Firewall: .......................................................................................... PEOPLE WITH DISABILITIES.
30513 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30514 16:21:35 (0) ** DCOM Status: ........................................................................................................ Ok.
30515 16:21:35 (0) * Registry WMI configuration:... Ok.
30516 16:21:35 (0) * INFO: WMI service has dependents:... 1 SERVICE (S)!
30517 16:21:35 (0) *-(ICS) (SHAREDACCESS, StartMode = 'Disabled') Internet connection sharing
30518 16:21:35 (0) *-online if the WMI service is stopped, or the services listed should be stopped as well.
30519 16:21:35 (0) * note: If the service is marked with a (*), this means that the service application / use WMI, but
30520 16:21:35 (0) * there is no hard dependency on WMI. However, if the WMI service is stopped.
30521 16:21:35 (0) * this can prevent the application of service / to work as expected.
30522 16:21:35 (0) *.
30523 16:21:35 (0) ** RPCSS service: ...................................................................................................... OK (already begun).
30524 16:21:35 (0) ** WINMGMT service: .................................................................................................... OK (already begun).
30525 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30526 16:21:35 (0) * for the WMI service DCOM configuration:... Ok.
30527 16:21:35 (0) * components WMI DCOM registrations:... Ok.
30528 16:21:35 (0) * records WMI ProgID:... Ok.
30529 16:21:35 (2)! WARNING: WMI provider DCOM missing registrations for the following providers:... 3 WARNING (S)!
30530 16:21:35 (0) *-ROOT/SNMP/LOCALHOST, MS_SNMP_REFERENT_EVENT_PROVIDER ({9D5BED16-0765-11D1-AB2C-00C04FD9159E})
30531 16:21:35 (0) * the provider DLL: "
30532 16:21:35 (0) *-ROOT/SNMP/LOCALHOST, MS_SNMP_CLASS_PROVIDER ({70426720-F78F-11CF-9151-00AA00A4086C})
30533 16:21:35 (0) * the provider DLL: "
30534 16:21:35 (0) *-ROOT/SNMP/LOCALHOST, MS_SNMP_ENCAPSULATED_EVENT_PROVIDER ({19C813AC-FEE7-11D0-AB22-00C04FD9159E})
30535 16:21:35 (0) * the provider DLL: "
30536 16:21:35 (0) * => this is a problem because there are still some WMI classes referencing this list of suppliers
30537 16:21:35 (0) * while the DCOM registration is incorrect or missing. This may be due to:
30538 16:21:35 (0) *-an uninstall of the software.
30539 16:21:35 (0) *-a deletion of some data to registry keys.
30540 16:21:35 (0) *-a corruption of the registry.
30541 16:21:35 (0) * =>, you can correct the DCOM configuration by:
30542 16:21:35 (0) *-running "REGSVR32. EXE' command.
30543 16:21:35 (0) * note: you can create a list of classes in relation to the WMI provider and the MOF with WMIDiag file.
30544 16:21:35 (0) * (this list can be built on a WMI Windows similar and functional installation)
30545 16:21:35 (0) * the following command line must be used:
30546 16:21:35 (0) * i.e. "WMIDiag CorrelateClassAndProvider.
30547 16:21:35 (2)! WARNING: The re-registration with REGSVR32. EXE DLL all the of 'C:\WINDOWS\SYSTEM32\WBEM\ '.
30548 16:21:35 (0) * can not solve the problem as the DLL supporting the WMI classes
30549 16:21:35 (0) * can be located in a different folder.
30550 16:21:35 (0) * you must consult the class name to determine the software providing the associated DLL.
30551 16:21:35 (0) *-online if the software has been uninstalled intentionally, so this information must be
30552 16:21:35 (0) * deleted of the WMI repository. You can use the "WMIC. EXE' command to remove
30553 16:21:35 (0) * registration of provider data.
30554 16:21:35 (0) * i.e. ' WMIC. EXE /NAMESPACE:\\ROOT\SNMP\LOCALHOST path __Win32Provider Where Name = 'MS_SNMP_ENCAPSULATED_EVENT_PROVIDER' DELETE'
30555 16:21:35 (0) *-online if namespace was ENTIRELY dedicated to the intentionally, uninstalled software
30556 16:21:35 (0) * the namespace and ALL of its content can be ENTIRELY deleted.
30557 16:21:35 (0) * i.e. ' WMIC. EXE /NAMESPACE:\\ROOT\SNMP path __NAMESPACE Where Name = 'LOCALHOST' DELETE'
30558 16:21:35 (0) * - re - install the software.
30559 16:21:35 (0) *.
30560 16:21:35 (0) * registrations CIM WMI provider:... Ok.
30561 16:21:35 (0) * provider WMI CLSID:... Ok.
30562 16:21:35 (0) * availability EXE/DLL WMI providers:... Ok.
30563 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30564 16:21:35 (0) * INFO: User Account Control (UAC):... PEOPLE WITH DISABILITIES.
30565 16:21:35 (0) * INFO: filtering Local account:... PERMIT.
30566 16:21:35 (0) *-online tasks WMI to access WMI information on this computer and that requires remote administration
30567 16:21:35 (0) * privileges SHOULD use part of the DOMAIN of the Local computer administrators group account
30568 16:21:35 (0) * to ensure that the privileges are granted. If a Local user account is used for outdoor
30569 16:21:35 (0) * access, it will be reduced to a simple user (filtered token), even if it is part of the Local Administrators group.
30570 16:21:35 (0) *.
30571 16:21:35 (0) * global DCOM security status:... Ok.
30572 16:21:35 (0) * overall WMI decision:... Ok.
30573 16:21:35 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
30574 16:21:35 (0) * INFO: SUBSCRIPTION permanent WMI (S):... 1.
30575 16:21:35 (0) *-ROOT/SUBSCRIPTION, consumption of NTEventLogEventConsumer.Name event log = "SCM".
30576 16:21:35 (0) * ' select * from MSFT_SCMEventLogEvent'
30577 16:21:35 (0) *.
30578 16:21:35 (0) * WMI TIMER method:... NONE.
30579 16:21:35 (0) * INFO: WMI or requiring a CONFIDENTIALITY of the PACKAGE:... 2 NAMESPACE (S)!
30580 16:21:35 (0) *-ROOT/CIMV2/SECURITY/MICROSOFTTPM.
30581 16:21:35 (0) *-ROOT/CIMV2/TERMINALSERVICES.
30582 16:21:35 (0) * => when connecting remotely, the or listed have the WMI client
30583 16:21:35 (0) * use an encrypted connection by specifying the level of CONFIDENTIALITY of the PACKET authentication.
30584 16:21:35 (0) * (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
30585 16:21:35 (0) * i.e. ' WMIC. EXE/node: "NYBES' /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\CIMV2\TERMINALSERVICES Class __SystemSecurity'
30586 16:21:35 (0) *.
30587 16:21:35 (0) * THE WMI MONIKER CONNECTIONS:... Ok.
30588 16:21:35 (0) ** WMI CONNECTIONS: .................................................................................................... Ok.
30589 16:21:35 (1). ERROR: WMI GET operation reported errors:... ERROR 32 (S)!
30590 16:21:35 (0) * - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30591 16:21:35 (0) * MOF registration: "
30592 16:21:35 (0) * - Root/CIMV2, Win32_OsBaselineProvider, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30593 16:21:35 (0) * MOF registration: "
30594 16:21:35 (0) * - Root/CIMV2, Win32_OsBaseline, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30595 16:21:35 (0) * MOF registration: "
30596 16:21:35 (0) * - Root/CIMV2, Win32_DriverVXD, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30597 16:21:35 (0) * MOF registration: "
30598 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_BITS_BITSNetUtilization, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30599 16:21:35 (0) * MOF registration: "
30600 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_BITS_BITSNetUtilization, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30601 16:21:35 (0) * MOF registration: "
30602 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30603 16:21:35 (0) * MOF registration: "
30604 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30605 16:21:35 (0) * MOF registration: "
30606 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30607 16:21:35 (0) * MOF registration: "
30608 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30609 16:21:35 (0) * MOF registration: "
30610 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30611 16:21:35 (0) * MOF registration: "
30612 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30613 16:21:35 (0) * MOF registration: "
30614 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30615 16:21:35 (0) * MOF registration: "
30616 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30617 16:21:35 (0) * MOF registration: "
30618 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30619 16:21:35 (0) * MOF registration: "
30620 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30621 16:21:35 (0) * MOF registration: "
30622 16:21:35 (0) * - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30623 16:21:35 (0) * MOF registration: "
30624 16:21:35 (0) * - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30625 16:21:35 (0) * MOF registration: "
30626 16:21:35 (0) * - root/WMI, ReserveDisjoinThread, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30627 16:21:35 (0) * MOF registration: "
30628 16:21:35 (0) * - root/WMI, ReserveLateCount, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30629 16:21:35 (0) * MOF registration: "
30630 16:21:35 (0) * - root/WMI, ReserveJoinThread, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30631 16:21:35 (0) * MOF registration: "
30632 16:21:35 (0) * - root/WMI, ReserveDelete, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30633 16:21:35 (0) * MOF registration: "
30634 16:21:35 (0) * - root/WMI, ReserveBandwidth, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30635 16:21:35 (0) * MOF registration: "
30636 16:21:35 (0) * - root/WMI, ReserveCreate, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30637 16:21:35 (0) * MOF registration: "
30638 16:21:35 (0) * - root/WMI, SystemConfig_PhyDisk, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30639 16:21:35 (0) * MOF registration: "
30640 16:21:35 (0) * - root/WMI, SystemConfig_Video, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30641 16:21:35 (0) * MOF registration: "
30642 16:21:35 (0) * - root/WMI, SystemConfig_IDEChannel, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30643 16:21:35 (0) * MOF registration: "
30644 16:21:35 (0) * - root/WMI, SystemConfig_NIC, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30645 16:21:35 (0) * MOF registration: "
30646 16:21:35 (0) * - root/WMI, SystemConfig_Network, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30647 16:21:35 (0) * MOF registration: "
30648 16:21:35 (0) * - root/WMI, SystemConfig_CPU, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30649 16:21:35 (0) * MOF registration: "
30650 16:21:35 (0) * - root/WMI, SystemConfig_LogDisk, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30651 16:21:35 (0) * MOF registration: "
30652 16:21:35 (0) * - root/WMI, SystemConfig_Power, 0 x 80041002 - object (WBEM_E_NOT_FOUND) is not found.
30653 16:21:35 (0) * MOF registration: "
30654 16:21:35 (0) *-online performance when WMI class is missing (for example "Win32_PerfRawData_TermService_TerminalServices"), it is usually due to
30655 16:21:35 (0) * a lack of refresh of the buffer of the WMI provider class exposing WMI performance counters.
30656 16:21:35 (0) * you can update the WMI provider class buffer with the following command:
30657 16:21:35 (0) *.
30658 16:21:35 (0) * i.e. "WINMGMT. EXE /SYNCPERF'
30659 16:21:35 (0) *.
30660 16:21:35 (0) * representations WMI MOF:... Ok.
30661 16:21:35 (0) * WMI QUALIFIER access operations:... Ok.
30662 16:21:35 (0) * WMI ENUMERATION operations:... Ok.
30663 16:21:35 (2)! WARNING: Operation WMI EXECQUERY reported errors:... 1 WARNING (S)!
30664 16:21:35 (0) *-Root/CIMV2, ' Select * from Win32_USBController' did not return any instance while the instance at LEAST 1.
30665 16:21:35 (0) *.
30666 16:21:35 (2)! WARNING: GET the VALUE WMI operation reported errors:... 5 WARNING (S)!
30667 16:21:35 (0) *-root, example: __EventConsumerProviderCacheControl = @, property: ClearAfter = "00000000000030.000000:000" (expected default = "00000000000500.000000:000").
30668 16:21:35 (0) *-root, example: __EventProviderCacheControl = @, property: ClearAfter = "00000000000030.000000:000" (expected default = "00000000000500.000000:000").
30669 16:21:35 (0) *-root, example: __EventSinkCacheControl = @, property: ClearAfter = "00000000000015.000000:000" (expected default = "00000000000230.000000:000").
30670 16:21:35 (0) *-root, example: __ObjectProviderCacheControl = @, property: ClearAfter = "00000000000030.000000:000" (expected default = "00000000000500.000000:000").
30671 16:21:35 (0) *-root, example: __PropertyProviderCacheControl = @, property: ClearAfter = "00000000000030.000000:000" (expected default = "00000000000500.000000:000").
30672 16:21:35 (0) *.
30673 16:21:35 (0) * WRITE WMI operations:... NOT TESTED.
30674, 16:21:35 (0) * WMI PUT operations:... NOT TESTED.
30675 16:21:35 (0) * WMI DELETE operations:... NOT TESTED.
30676 16:21:35 (0) * the static instances of WMI retrieved:... 1934.
30677 16:21:35 (0) * WMI dynamic instances retrieved:... 0.
30678 16:21:35 (0) * WMI instance request cancellations (to limit the performance impact):... 1.
30679 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30680 16:21:35 (0) * number of events in the event log BEFORE run WMIDiag since the last 20 day (s):
30681 16:21:35 (0) ** DCOM: ............................................................................................................. 0.
30682 16:21:35 (0) ** WINMGMT: .......................................................................................................... 0.
30683 16:21:35 (0) ** WMIADAPTER: ....................................................................................................... 0.
30684 16:21:35 (0) *.
30685 16:21:35 (0) * number of events AFTER you run WMIDiag additional event log:
30686 16:21:35 (0) ** DCOM: ............................................................................................................. 0.
30687 16:21:35 (0) ** WINMGMT: .......................................................................................................... 0.
30688 16:21:35 (0) ** WMIADAPTER: ....................................................................................................... 0.
30689 16:21:35 (0) *.
30690 16:21:35 (0) * 32 error (s) 0 x 80041002 - (WBEM_E_NOT_FOUND) object not found
30691 16:21:35 (0) *-online this error is usually a WMI error. This WMI error is due to:
30692 16:21:35 (0) *-a missing definition of WMI class or object.
30693 16:21:35 (0) * (see any failure of a GET operation, ENUMERATION, EXECQUERY and GET the VALUE).
30694 16:21:35 (0) * you can correct the missing class definitions by:
30695 16:21:35 (0) *-the MOF file (s) recompile manually with the command "MOFCOMP.
30696 16:21:35 (0) * note: you can create a list of classes in relation to the WMI provider and the MOF with WMIDiag file.
30697 16:21:35 (0) * (this list can be built on a WMI Windows similar and functional installation)
30698 16:21:35 (0) * the following command line must be used:
30699 16:21:35 (0) * i.e. "WMIDiag CorrelateClassAndProvider.
30700 16:21:35 (0) * note: when a WMI class performance class is missing, you can manually resynchronize the performance counters
30701 16:21:35 (0) * with WMI by starting the ADAP process.
30702 16:21:35 (0) *-a corruption of WMI repository.
30703 16:21:35 (0) * in such a case, you must re-run the WMIDiag with the parameter "WriteInRepository.
30704 16:21:35 (0) * to validate the WMI repository operations.
30705 16:21:35 (0) * note: make sure THAT you are an administrator with FULL access to ALL WMI of the computer before namespaces
30706 16:21:35 (0) * the WriteInRepository command. To write temporary data of the root namespace, use:
30707 16:21:35 (0) * i.e. 'WMIDiag WriteInRepository = Root'
30708 16:21:35 (0) *-if the WriteInRepository command fails, while an administrator with all access to all namespaces
30709 16:21:35 (0) * the WMI repository needs to be rebuilt.
30710 16:21:35 (0) * note: rebuilding the WMI repository is required to locate all MOF files that are needed to rebuild the repository.
30711 16:21:35 (0) * otherwise, some applications may fail after the reconstruction.
30712 16:21:35 (0) * this can be achieved with the following command:
30713 16:21:35 (0) * i.e. "WMIDiag ShowMOFErrors.
30714 16:21:35 (0) * note: the reconstruction of the repository should be a solution of LAST RESORT and ONLY after execution
30715 16:21:35 (0) * all patches previously mentioned.
30716 16:21:35 (2)! WARNING: Static information stored by external applications in the repository will be LOST! (e.g., the SMS inventory)
30717 16:21:35 (0) *.
30718 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30719 16:21:35 (0) * unexpected, registry keys values incorrect or absent:... 1 KEY (S)!
30720 16:21:35 (0) * INFO: unexpected registry key value:
30721 16:21:35 (0) *-current: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ)-> 0
30722 16:21:35 (0) *-expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ)-> 1
30723 16:21:35 (0) * from the command line, the configuration of the registry can be corrected with the following command:
30724 16:21:35 (0) * i.e. ' Reg. Add EXE /v "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM", "Registration" t "REG_SZ" d '1' f'
30725 16:21:35 (0) *.
30726 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30727 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30728 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30729 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30730 16:21:35 (0) *.
30731 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30732 16:21:35 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
30733 16:21:35 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
30734 16:21:35 (0) *.
30735 16:21:35 (0) * ERROR: detected WMIDiag to problems that could prevent WMI works properly! Check ' C:\USERS\ECIADMIN\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2. SRV. SP1.64_NYBES_2012.07.09_16.15.16.log' for more details.
30736 16:21:35 (0) *.
30737 16:21:35 (0) * WMIDiag v2.1 ended Monday, July 9, 2012 at 16:21 (s: 1 W:79 E:38).Hi Jimmy Wang ,
I wish you post your question in the TechNet Forums because it caters to an audience of professionals .
To do this, you must refer to the below mentioned link.
http://social.technet.Microsoft.com/forums/en-us/categories/
Hope this helps!
-
Hi people,
I want to introduce in my default application Lookout (now 6.1), the ability to periodically make a backup of the historical database to another on the same PC, that way I can fix the life expectancy of default database for a few days instead of 1 year. This because I have a huge amount of data record (up to 1000 alarms conditions and 100 track of process variables) to the historical database, and I don't want the size of the database increases too.
To do this, I did an application test to test the CItadelControl object. Everything works very well for the trail, but not for alarm.
This is a limitation of the CitadelControl object? If so, there is another way to make a backup of the alarms?
Thank you.
Mario Fanelli
This is a limitation for the CitadelControl object.
How to check alarms is to use the MAX (measure automation project). Right-click on the database, and then select Archive. He archived data and alarms.
The alarm data are managed by SQL Server. The file is mssql.* in the data folder. If the SQL file is just about 100M after months, regardless.
-
How can I copy some object without it being related to the original?
When I copy a pushbutton to Lookout 5.1 it is linked to the original. If I change the name of the newly pasted key (or any other property) it changes it and the original object.
How to create a pasted object that has the same properties as the original without the 2 related? Or how to break the link?
If you select a displayed object, then do a copy & paste (ctrl + c ctrl + v, copy & paste in the menu drop-down change or hold down the SHIFT key & drag) you make a copy of the original object. If you want a new object created, select the display object and press ctrl (not updated) & drag. Or use Object Explorer when ctrl + c ctrl + v or right click contextual menu to create new objects, but not display.
-
(2) is there a place that I see all the logics without seeking the properties of each object?
LookoutDirect 4.5
(2) is there a place that I see all the logics without seeking the properties of each object?
It seems that the lookout 4.5 is not browser connection. We have added this tool to view the connections at the belvedere 5.x.
-
How to dynamically change the color of the text in the lookout?
I wish that the color of the text to change according to a different value. How can I do this at Lookout?
I tried to find connections to text insertions and expressions but have failed.
Thank you
Dave
Change the display text property, setting the Style of background as "Transparent".
Create a gauge object. It is capable of changing color on different conditions. Put the gauge above the text display.
-
Problem of Lookout 6.0.2 modbus rtu?
One of our clients has Lookout 6.0.2 communicates with several Packs of Scada CMI on wireless modems using the Modbus RTU Protocol. All of a sudden Friday night he got comm fail alarm pages on site all but one. The Modbus statistics window revealed that Lookout had stopped voting for all sites, except a single site that remained in communications. The only activity is a single site.
He saw it queries this way for 2 hours, never to regain the normal polling cycle.
I had him quit and relaunch Lookout and mark returned to normal and has been like this since late Friday night.
This system has been in use for several years with very close 100% good communications sice we have deployed so far.
It was obviously a Lookout failure, since the only approach was to quit and relaunch Lookout.
Is there a timer for this kind of mistake?
Is this a failure of the cbx Modbus object? (We use the plain vanilla Modbus driver)
Roger Foote
Foote control systems
-
Problems of expression lookOut
Hello guys,.
I met a very strange situation today. I created an expression in a file on the server which then be used for another calculation. To be sure my expression was working fine, I dragged the expression of a Panel to see if I could get a number, and I did. The strange thing is that expression was X out as if there was no link, but my number has been updated again. I could see my number correctly changing from top to bottom, but the just X out. I tried to restart the server is not available. I guess LookOut could take the good parts and leave the bad output that resulted in the X. However if something in my expression was wrong (such as typing errors), LookOut wouldn't even take it at all. I tried to break this long term piece by piece, and every single one was working fine. What would be the problem here?
I tried to create an expression = Pot1.value + FieldPoint1.AI000.00.
The FieldPoint module does not exist. Then, I got an alarm on the FieldPoint1 object.
I saw the X on the expression, and when I decide to Pot1, the value of the expression changes.
So, it looks like the same behavior. Take a look at the expression, makes it read all the data object of the pilot?
Another way is to replace each part of the expression with a constant value one by one.
-
Hello
I had a problem when I invoke the SMS composer with pre-filled values.
My code:
function ppsEncode (obj) {}
data var = ", name, value;
for (name in obj) {}
name of data += + ':';
value = obj [name];
If (typeof value = "string") {}
data += ':' + value;
}
Else if (typeof value = 'number') {}
data += "n:" + value;
}
Else if (typeof value = "boolean") {}
data += "b:" + value;
}
Else if (typeof value = 'object') {}
data += ' json:' + JSON.stringify (value);
}
data += '\n ';
}
return data;
}function invoke() {}
try {}
BlackBerry.Invoke.Invoke ({}
target: "sys.pim.text_messaging.composer."
Action: "bb.action.COMPOSE."
type: "application/text_messaging,"
data : ppsEncode ({"a": "1234", "body": "text", "Send": "false"})
},
{function (successEvt)}
Alert (successEvt);
},
{function (errorEvt)}
Alert (errorEvt);
}
);
}
{} catch (e)
Alert (e);
}
}The problem occurs when I try to run invoke(): Invoke plugin throws 'INVOKE_NO_TARGET_ERROR '.
How to properly call SMS using WebWorks composer?
Thank you
Hello
Since it is a web application, I would recommend citing text messages using the sms: / / window.
Here is an example:
-
difference between email and sms
Hi guys,.
I do not understand how to tell the difference between email and sms messages. It seems that all fall under the Inbox folder, and they are all Message objects. Is this correct? If this isn't the case, please correct me. Is there a method to retrieve all SMS?
Thank you!
Look carefully at the API - there are three distinct objects of the Message:
javax.wireless.messaging.Message (SMS)
net.rim.blackberry.api.blackberrymessenger.Message (BB Messenger - 4.2.1 and higher)
net.rim.blackberry.api.mail.Message (email)
All three a really different classes completely different methods and properties.
Maybe you are looking for
-
Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?
Why my iMac turns so slowly after the upgrade of the Lion in El Capitan?
-
How can I completely delete yahoo from firefox
I continually changed my yahoo to Bing search engine, but every time that I re - open Firefox, my search engine is reset on Yahoo. I'm about to quit using firefox, because I can't get rid of Yahoo. I heard that many others have had this problem as we
-
Is there a way to uninstall the update of Firefox? I already had a problem with this program because it was not compatible with the latest version of IE.
-
Nobody knows why the mouse Apple Magic mouse has these gliders made of plastic which does not slip on the bottom? I don't understand why something that costs so much is so impractical. There are also two batteries while all other wireless mouse I've
-
Satellite L755 resets on battery
Hello I bought a laptop Toshiba L755 and after 2 weeks, he suffered a problem whereby on battery it would just restart. He would randomly and while idle/very little use. I returned it to Comet requesting a refund, but they have dropped and gave me a