sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

Similar Questions

• HP touchsmart IQ775 Wireless mouse has stopped working.

  Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

  Hello

  HP also has their own update so he could be there?

  I would stop automatic driver updates, because they are often older certified and MS is far behind.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
  ------------------------------------------------------

  This, to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• my wireless mouse has stopped working

  I have two mouse Microsoft Wireless in the 3500 Series and 4000 series, I had the 4000 first order works now my 3500 has stopped working can help a whole?

  Hi Richard,

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  Method 1: Run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems

  If the method above does not work, proceed to the next method.

  Method 2: Refer to the suggestions for the following links.
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• All of a sudden my wireless mouse has stopped working. The mouse is on and relatively new.

  Tonight my mouse (Logitech) wireless has stop working.  This happened once, and one of my friends told me to remove the receiver, shut my computer down and put the mouse back in.  However, I don't remember the exact steps he gave me.   I tried several different things, but none seems not to work.

  Hello

  What is the model number of the mouse?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

  http://support.Microsoft.com/ph/7746

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

  I would suggest you also contact the Logitech support forum and check.

  http://www.Logitech.com/en-us/support

• my microsoft wireless mouse has stopped working, I replaced battery

  my wireless mouse was fine and then stopped working. I changed the batteries and it seemed to work and then arrested again.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

• My Apple wireless mouse has stopped working.

  Initially, software system warned me that the batteries are low.  Then it stopped working completely.  I replaced with new(tested good) AA batteries and the mouse still does not connect to my iMac. 10.11.3 is updated software.  My trackpad works ok so the BT Service is always good. I even tried an another Apple wireless mouse and it doesn't connect either.  Can an optical mouse as this just failure?

  A mouse can not just, indeed at the end of his life he cannot do anything else.   I think that your first test is to hold the mouse upside down and check if you have a green light display.    If so, the batteries are probably ok.   If the light flashes, it is most likely, connections are at fault.   Clean the inside of the battery carefully in case there is any residue of previous batteries.   Clean your battery connections and try again.   You could also try your mouse (indeed, two of them) with another computer, maybe a friend.   It doesn't matter if it's a pc.   That will confirm the effectiveness of the mouse.

  Magic Mouse 2 has been designed and developed for El Capitan (10.11.3)... so old mice may not work as well, but I have yet to hear any complaints.

• V470 blue tooth wireless mouse has stopped working

  My Logitech v470 blue tooth mouse worked but stopped.  I went online and downloaded the latest version of the software.  The machine started to work.  I used for1.5 days and on the second day, all of a sudden, it stopped working.  All diagnoses that I know say it works.  The blue light comes on when I press the search button but never connects.  The computer says, the device works, but it does not.  Please help since the pad on my laptop is more sensitive (opens instead of allowing me to do some drag on the desktop) and I need the mouse to work around the touchpad.

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  If the above does not correct this contact Logitech

• 2.4 GHz HP wireless optical mouse has stopped working

  My wireless mouse has stopped working. I use it on a laptop Windows 8. I used this mouse wireless with this computer for almost a year. All of a sudden it just stopped working. I changed the batteries, so it wasn't the problem. I have uninstalled and reinstalled software and that did not work. Is there anything else I can try before I buy a new mouse? Product # is WT564A.  The model # is FHA-3510. The S/N IS CN1 [personal information]. Product #, model # and s/n is not the computer mouse. Any help would be greatly appreciated.

  Hey there eunash,

  I found three links that could help you, please take a look and try some of the steps:

  Keyboard and wireless mouse troubleshooting

  Mouse, touchpad and keyboard with Windows problems

  .. .and finally, check out the Merita post on this thread, they had some good ideas while explaining what might be going on: http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP-FHA-3510-mouse-trouble/m-p/2666383/highlight/true#M10473

• Your wireless card has stopped working properly.

  Often, I receive this message "problem reports and solution:
  A problem with your wireless network card

  Your wireless card has stopped working properly.
  There is a network adapter that allows your computer to connect to a wireless network.
  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
  The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

  I would be grateful for any advice.
  Thanks in advance.

  Hi dtw1970,

  While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

  Check the link and try the steps mentioned below.
  http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

  You can also try posting your query in the Dell Community, see the link below.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Message "Microsoft (C) Register Server has stopped working and was closed" appears

  When I start up I get the message "Microsoft (C) Register Server has stopped working and was closed".

  Here, an article which offers a solution to this problem that seems easy to implmenent and is worth a visit: .

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft (C) Register Server has stopped working

  The error message "Microsoft (C) Register Server has stopped working" prevents me from opening any browser or my main console of Trendmico on my account administrstor of PC to the home address but strangely no this problem doesn't exist in the accounts no administrator on my PC at home. All the solutions out there? I use Vista Home Premium on 64-bit operating system.

  Thank you

  Hello

  Perform the steps suggested by Halima S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Microsoft-register-server-has-stopped-working/b579412f-ECA1-4551-981b-51c43ade93e0

  Hope this information helps.

• I get a Microsoft Search Protocol Host has stopped working the alert box. How to solve this?

  I get a Microsoft Search Protocol Host has stopped working the alert box. How to solve this? It gives me the option to 'Search online (recommended)', but when I click on it nothing happens. Tried to restart and used Malware Bytes and my security suite Norton to seek something malicious, without success. Any suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. when exactly you get this error?

  I suggest you try to reset to a new start Indexing Options by removing and then rebuild the index and check if it helps.
  Your search index requires virtually no maintenance. However, if the index looking for files that you know problems must be in a location indexed; You may have to re-create the index.

  To rebuild the index:

  a. open indexing and Search Options by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Indexing Options.

  b. click Advanced Options, click the index settings tab and then click on rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  See the link below for more details:

  Improve Windows searches using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  For more information, see the following Microsoft articles:

  The problems with the search
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  You can also check out the msdn below link for a similar problem and see if that solves the problem:

  http://social.msdn.Microsoft.com/forums/en/windowsdesktopsearchhelp/thread/53f6e6e0-89F0-47D8-A812-3a7d7c7e4c63

  Hope the information is useful.

• I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.

  Original title: Win32/Small.CA

  I got an answer from Microsoft after a "windows has stopped working" I have to delete the virus Win32/Small.CA.  I ran the security scan and the answer was "no viruses or malware found."  Could someone tell me how to deal with a Win32/Small.CA and how to determine if I really get it.  Thank you.

  Hello
  Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• I get an error message saying that the "Microsoft Network Inspection System" has stopped working and it is closed. What does that mean?

  Microsoft network inspection system has stopped working and closes. What this means, and is there a solution?

  original title: NIS has stopped working

  Hi Travispersons,

  You can read the following article and see if it helps.

  Install the latest Microsoft Security Essentials definition updates

  Hope this information is useful.

• Search Indexer Microsoft Windows Installer error "Microsoft Windows Search index has stopped working"

  Hi, I keep getting a pop up saying "Microsoft Windows Search index has stopped working.  Windows will notify you if they find a solution. "  It has been like that for months.  How can I install or fix the problem?

  Thank you

  First of all, try this:

  http://support.Microsoft.com/mats/windows_search/en-us

  And if still same issue then:

  (1) run defragnment

  clean race 2 disks)

  (3) Windows Update and make sure last Pack of Service was installed

  Run disk check 4)

  See if the problem is solved or not.

  There were also some search Index in the Panel and setting you could it re-index.