snapshoot problem with his camera or sound problem

Similar Questions

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• Problem with rear camera

  Dear team,

  It comes with the rear camera on my phone (when using camera flash only):

  1. He died while taking snaps with rear camera with flash, even when the battery is charged to 100%
     • Then I have to wait a few minutes to revive or get it charged by data cable for immediate departure.
  2. on the other hand, if I don't use Flash while using the camera, it works perfectly (for example, you can click snaps as much as you want).

  Already tried troubleshooting steps:

  • I restored my Iphone 5 using itnues, for about 5-8 times, but still the problem is not resolved.

  The team can help out me.

  Looks like a hardware issue not software if you have already restored the iPhone

  If you have apple care take it to an Apple Store to get it looked at,.

  If you do not bring to the closest repair shop and tell them of the problem

• Problem with Chicony camera on Satellite A200

  Hello

  I reinstall Windows Vista on my A200 PSAE6E
  Windows SP1 update
  and installed the drivers of all the

  I have a strange problem with my cam.
  When I start with the blue led camera assistant software shines, I can see an image (the image is not clear) for 10-20 seconds and then everything is black.
  I removed the camera assistant software and install again, but its still the same
  Device Manager showing me that everything is ok with Chicony USB 2.0 Camera

  Can anyone give a suggestion that do I do?

  Thank you very much

  You must install all the Vista updates... and I mean all THE Vista out!
  Then update the webcam software and clean the operating system using the CCleaner.

• Image problems with the camera on the Satellite A200 - 14 d

  2 days ago, I bought my laptop and the image on cam doesn't seem right to me. It's a little blurry, as very many lines through it. It resembles nothing of the image from a camera with 1.3 Mp should look like. It's even better on my old cam... I tried changing the settings but nothing works.

  Anyone know what the problem with my camera? Please help me because I do not know what to do...

  Hello

  As you said, it is a 1 pixel cam. 3 MB and you should not expect too much of this cam.

  But you can change some settings to improve the quality of the image
  Check the options in the "Assistant camera".
  In the "Properties", you can define Image settings like sharpness, contrast, saturation, etc.
  The quality of the image also depends on the standard photo as jpeg folder, bmp and the size of the image.

• Problem with zoom camera for blackBerry Smartphones

  I had no problems with my camera so far. I got the Curve 8310 for 3 months and now all of a sudden the camera won't zoom. can anyone help me this.

  I had the same problem with my 8310 that I solved it by removing the battery for a few seconds and then replace and reboot... zoom doesn't always from time to time, but restarting always sorts

• "I have a Mac and Adobe Bridge im come with" editing Camera Raw requires that a product calling it launched at least once to activate this feature. "How can I solve this problem

  "I have a Mac and Adobe Bridge im come with" editing Camera Raw requires that a product calling it launched at least once to activate this feature. "How can I solve this problem

  Yes, please check if you have Photoshop installed on your machine, if yes open it once so that you can edit your images in Camera Raw Utility in Bridge.

  Also, you can update the camera raw plugin: Camera Raw of Adobe Photoshop CC and CS6 Installer

  Let us know if that helps.

  Kind regards

  Mohit

• Problem with his comments before signing the PDF.

  Problem with his comments before signing the PDF.

  My problem is with sticky notes that I need to use my comments frequently.

  When I place my signature and save document commented, disappear all pop-up windows and icons of sticky notes go "flat" of the document.

  It's the same with all the annotation tools and pop ups disappear if I use them with.

  Is there a way to keep comments and pop-ups 'living' signing and recording after his comments?

  Fig 1: commented the document before you sign and save.

  

  Photo 2: after you save the signed document. Pop - ups disappeared and sticky notes are here to stay.

  

  Hey Tomi,

  It was a typo on the part of Ajlan. It was supposed to read "Lock after signing the Document. Please see the screenshot below. However, this check box only appears in the dialog box sign the Document If you sign the last signature on the PDF field. If you don't, it's because there are other unsigned signature fields.

  Steve

  

• Problem of proportions with consumer camera and first elements 11

  Hello all - I'm Steve. I'm new here. I always do photography on a pro, digital and analog level, but I'm an absolute with video model... but then, I don't want to not do much, just in a rudimentary way cut some family videos, download, etc.

  However, I can't first elements 11 out of my clips self-portrait in a correct aspect ratio.

  My camera is a consumer-model Canon Legria FS200. I shoot in a resolution of the camera calls XP. The device says there are 16:9, the monitor of the camera shows them as 16:9 and when I use the software (called Pixela Image Mixer) provided with the camera to import clips on the disc, I get mpg files that says Windows Explorer (7) are 720 x 576 pixels, and that VLC player display correctly as screen 16:9 without me having to change its display settings.

  However, at the time where I have import into Premiere Elements, they appear horizontally in a hurry, and I can't go out in any other way, with or without changing them in first.

  I tried to use the recipe given here: https://forums.adobe.com/message/5987538#5987538 , (replacing only NTSC PAL because I'm in Germany), namely, defining the predefined together project manually to PAL/Hard Disk etc. / big screen 48 kHz and check strength parameters of the program. But no matter, first displays the video in compressed form horizontally, with large black bars on the right and left.

  On the side of exports, affecting the output PAL DVD widescreen and the format of the pixels in the output widescreen settings do not help, either. Nor did I can manually force VLC player to view the correct aspect ratio. BTW, audio is perfect throughout.

  It is on that I can see myself get without help. Someone at - it an idea?

  Thank you very much in advance,

  Steve, the Germany

  Interpreter all the clips as big screen then onto the timeline.

• the camera shutter sound cannot be silent with the mute button on my phone i 6 s

  the camera shutter sound cannot be silent with the mute button on my phone i 6 s

  Depending on where you purchased your phone, this is not possible, because of legislation in these countries that regulate this feature.

  In all other cases, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again. You won't lose data, but it can cure some problems after installing new software or applications.

  In the case where this does not work, restore the phone:

  Use iTunes to restore your device iOS to factory settings

• Unable to work with the camera on laptop

  Original title: camera

  my camera on my laptop does not work.

  It works through skyping, but I want to take pictures and do the videoes but his does not work

  Hi r.,

  Please answer a few questions to refine the question.

  1. are you referring to photo App? What is the situation when you launch photo App?

  2. do you receive any error messages?

  3. What is the brand and model of the laptop?

  As you said that you were able to work with the camera when using Skype app, there is a problem with the permission of the camera app to use the construction in camera.

  If the camera application opens, then follow the steps mentioned below:

  a. press Windows + C on your keyboard to open the bar of charms.
  b. Select the settings option.
  c. Select permissions .
  d. snap it allow this application to access to your: Webcam and Microphone option.
  e. close the application by pressing Alt + F4 on your keyboard.
  f. open the camera app and check the results.

  If the problem persists, then I suggest you to run Windows 8 Troubleshooting App to diagnose and resolve the problem.

  Hope this information helps.

• Its mixed? While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds will play together. How to avoid what is happening?

  While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds play together, which is not a good customer experience.

  How to avoid what is happening? Placing a marker can help, but cannot solve the problem when the compliant/no intentional user, press tab.

  
  

  Better, if the presenter can triggle tab automatically at some point, or click interaction, no game bar function.

  Hi Louie,

  My sincere apologies for not being able to help on your previous question.

  Now, that the Interactions are concerned, they were initially designed to be placed as standalone content on the slide.

  Also if you try to resize your interaction and place it on the slide as well as other content/objects released published will always give a priority to the Interaction that it deemed to be a specific slide of Interaction.

  In the previous project, you shared, you try to time the Interaction with PowerPoint animations and wanted it to appear later on the set of slides, rather than on the start. But, as explained above, presenter honored not this setting in your project, because he in fact has considered a slide of interaction and display interaction since the beginning of the slide room itself.

  Also the number listed in this thread is concerned, there is no direct way to do it but I would like to suggest something that might help.

  If you want to keep the interaction on your slide and other content, Interaction will be available at the beginning of the slide. Surely there is no way that delaying his appearance, but you can still use animation related to Interaction in another goal. Within your presentation-> playback option settings, you can enable the feature of 'Pause after each animation' (see screenshot below). It will essentially help you achieve the function of auto-faisant a break from your animations, using your narration would automatically stop, just before you claim in your narrative and inform the learner to click on the different tabs of the Interaction. All you have to do is your narration and animation correctly so that the slide play does not break too many times in the time interval. Hope you find the idea of what I'm trying to say.

  

  Please mark this answer as being correct, if you find it useful. We would certainly look at such scenarios to be achievable directly at the request of our updates and later version.

  Thank you

  Zeeshan Hussain

  Adobe Presenter Engineering Team

• Avast shouws that firefox has mailwere, but I scanet it of I don't know what to do with his watch is not on other browsers don't

  Hello I have a problem: avast shouws that firefox has mailwere, but I scanet it don't I don't know what to do with his watch is not on other browsers, but I don't know haw remedy

  Year annual might try to do a full install of Mozilla.org
  Download Firefox full installation for all systems and languages {web link}

• Crash with Matrox camera mvBlueFox

  Hello

  I'm trying to interface with a camera mvBlueFox of Matrox.  It is a USB 2.0 camera, and the driver supports DirectShow interface which means that it should be usable with IMAQdx.  I downloaded the latest version of the Matrox driver and registered the DirectShow interface by their instructions.  The camera now presents itself as a device of NOR-IMAQdx NOR-MAX, but the problem I have is that as soon as I click on the camera in MAX, MAX crashes immediately.  Any ideas on that?

  Here is the configuration that I use:

  Windows 7 Pro 32 bit

  IMAQ 4.6.1

  IMAQdx 3.9.1

  IMAQ I/O 2.5

  MAX 5.6.0f0

  I also tried an old Windows XP computer that has earlier versions of the IMAQ and MAX installed with a similar result.  I have attached to the crash report if that helps too.

  Thank you!

  The accident is the (misnamed) 'DirectShow_acquire.ax' binary, which is an element that is the seller of the camera Matrix Vision, not Microsoft delivered.

  IMAQdx tries to query the IAMVideoProcAmp interface on the capture device and this call blocks. I think you'd have to ask Matrix Vision to debug this problem because they have symbols for their own dll and that you can see why it crashes.

  Eric

• HP Pavilion dv6 - 2173cl: card driver HP Pavilion dv6 - 2173cl Entertainment Notebook PC with windows 8.1 Sound

  After upgrade to windows 8 for windows 8.1 my laptop HP Pavilion dv6 - 2173cl has a problem with the card (no sound at all).  I went to HP.com but there is no driver for window 8.1 sound card.  What should I do now... Help, please...

  Hello:

  See if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&DLC=en&LC=en&OS=4158&product=6521360&sw_lang=